Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    ControllersTechDataSheets GC400

    Uploaded by

    imtiaz asghar
    The GC400 is a genset controller that can manage parallel applications and synchronize multiple generators. It has features like load sharing, synchronization, monitoring, alarms, data logging, and communication options. It is suited for applications requiring backup power systems with multiple generators that need to work together.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ControllersTechDataSheets GC400

    Uploaded by

    imtiaz asghar
    12 views2 pages
    The GC400 is a genset controller that can manage parallel applications and synchronize multiple generators. It has features like load sharing, synchronization, monitoring, alarms, data logging, and communication options. It is suited for applications requiring backup power systems with multiple generators that need to work together.

    Original Description:

    Solar controller data

    Original Title

    ControllersTechDataSheets_GC400

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The GC400 is a genset controller that can manage parallel applications and synchronize multiple generators. It has features like load sharing, synchronization, monitoring, alarms, data logging, and communication options. It is suited for applications requiring backup power systems with multiple generators that need to work together.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views2 pages

    ControllersTechDataSheets GC400

    Uploaded by

    imtiaz asghar
    The GC400 is a genset controller that can manage parallel applications and synchronize multiple generators. It has features like load sharing, synchronization, monitoring, alarms, data logging, and communication options. It is suited for applications requiring backup power systems with multiple generators that need to work together.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    GC400

    Genset Controller for Parallel Applications

    INTRODUCTION
    The GC400 is a competitive controller ideally suited for managing
    different types of parallel applications, especially for MPM (Multiple
    Prime Mover) and MSB (Multiple Standby) power plants, where the
    synchronization of several gensets is required. It can be installed easily
    and quickly, thanks to an internal load sharing and synchronizer.

    GC400Mains version is the perfect controller for those applications


    where the reverse synchronization is required to avoid any interruption
    to the supply to the load. All the necessary protections and features are
    included, with no additional dongles needed.

    A user-friendly graphical interface provides visual information about


    measures and alarms coming from the genset. Events and DTC logs can
    be accessed from the front panel and read on the display.

    As well as providing local or remote control, a version with built in


    GPRS/GPS tracking (GC400Link) is particularly suited for mobile or
    rental applications, where asset tracking and monitoring is required.

    MAIN FEATURES
    • True RMS readings on generator voltages and currents
    • Additional current measurement for neutral or ground fault
    protection
    • Active, reactive and apparent power measurements
    • Engine speed measurement by pick-up, frequency or W terminal
    • Graphic display with self or manual adjustable contrast based on
    the temperature
    • Insulated J1939 and MTU MDEC CAN interface
    • Interface with traditional MPU engines
    • USB, RS232 and insulated RS485 serial port with MODBUS RTU
    protocol, ethernet interface with MODBUS TCP protocol
    • Real time clock with battery
    • Events and data recording
    • Android and iOS app available for monitoring and remote control

    EMBEDDED FUNCTIONS
    • Engine diagnostic codes • Internal load-sharing
    • Periodical test • Internal synchronizer
    • Real time clock with internal rechargeable lithium battery • Powerful load management suitable for gensets of different powers
    • Fuel pump management, for external fuel tank • CAN interface for ECU connection (J1939 and MTU MDEC)
    • 126 events log • Insulated CAN interface for PMCBUS application (LOAD–SHARING
    • Pre-glow heat and coolant heater management and parallel management)
    • Remote start and stop • Up to 16 gensets connected together
    • Override function • Up to 4 alternative configurations
    • Hours counter for the maintenance schedule • Easy plant configuration
    • Daily counter with embedded calendar for the maintenance • Load and unload ramps
    • Embedded alarm sounder
    • Programmable by PC or using the keyboard of the controller
    • Remote encrypted firmware update
    • SMS communication
    • DHCP, DNS, NTP and SNMP support are available
    • Threshold as load shedding
    • Internal active and reactive power regulation

    www.meccalte.com
    GC400
    Genset Controller for Parallel Applications

    GC400 COMMUNICATIONS TECHNICAL DATA


    GC400/GC400 Mains • Supply voltage 7-32V DC
    • USB port • Power consumption typically less than 2W (auto mode, standby,
    AMF active, LCD lamp saving active)
    • RS232 Serial port Modbus RTU (support external modem)
    • Operating frequency 50Hz or 60Hz
    • RS485 Insulated serial port Modbus RTU
    • LCD with backlight
    • RJ45 Port as Ethernet interface TCP/IP
    • Recommended operating temperature -30°C to +70°C
    • Insulated CANBUS J1939 and MTU MDEC interface
    • Burn in at 50°C for 48h with test report for each controller
    • Additional CANBUS (PMCBUS) for the load sharing
    • Protection degree IP65 (gasket included)
    • Weight 750grammes
    GC400 Link
    • Overall dimension: 244 W) x 178 (H) x 40 (D) mm
    • USB port • Panel cut-out: 218 (W) x 159 (H) mm
    • RS232 serial port Modbus RTU • Specific function for French market EJP / EJP-T
    • RS485 insulated serial port Modbus RTU • EMC conforms to EN61326-1
    • Insulated CANBUS J1939 interface • Safety built in conformity to EN61010-1
    • Additional CANBUS (PMCBUS) for the load sharing
    • GPRS/GPS (2G/4G/5G ready) modem

    Options
    • REWIND - GPRS/GSM/GPS device (SMS alarms and warnings)
    • PSTN Modem (data calls for alarms and warnings)

    Mecc Alte SPA (HQ)


    Via Roma
    20-36051 Creazzo
    Vicenza - ITALY
    T: +39 0444 396111 The information contained in this document is substantially correct at the time of publication but
    E: [email protected] may be subject to change. Please work with your Mecc Alte contact to confirm details.

    www.meccalte.com

    You might also like