LoMasterDockLift Brochure
LoMasterDockLift Brochure
LoMasterDockLift Brochure
Typically, a dock lift will cost 1/3 the price of a fork truck and will
have a quicker ROI compared to the long-term cost associated
with operating a forklift and manually loading/off-loading a trailer.
A LoMaster™ Series Dock Lift will also greatly reduce handling
costs, cargo damage, and employee injury common to vertical
transfer operations.
Optional Features
Safety
Electric toe guard protection
Warning horn with volume control
Flashing amber beacon light
Interlock swing gates
Accordion safety skirting
Mechanical pop-up wheel chock
Operation
Key switch on push button
Lip: Aluminum, Split, Hydraulic, Spring Assist, Extended Length, Multiple Lift Speed Conversions for Optional Powerpacks
Low temperature oil 5 HP to 3 HP multiply lift speed by 0.4167
Immersion heater for oil reservoir 5 HP to 7-1/2 HP multiply lift speed by 1.29
3 - 10 HP remote powerpacks 5 HP to 10 HP multiply lift speed by 1.87
Consult factory for additional options.
Powerpack Specifications
Powerpack Length Width Height Shipping Weight
3 HP 18" 457 mm 15" 381 mm 29" 737 mm 175 lb 80 kg
5 HP 20" 508 mm 20" 508 mm 29" 737 mm 190 lb 86 kg
7-1/2 HP 25" 635 mm 20" 508 mm 36-1/2" 927 mm 405 lb 184 kg
10 HP 25" 635 mm 29" 737 mm 31" 787 mm 460 lb 209 kg
NOTE: 3 HP available for 5,000 lb - 6,000 lb (1,818 kg - 2,727 kg) capacity models only
84" (2,134mm) 144" (3,658 mm) 6.5 fpm 2.0 mpm 5.8 fpm 1.8 mpm 6.5 fpm 2.0 mpm
96" (2,438 mm) 7.4 fpm 2.3 mpm 7.4 fpm 2.3 mpm
108" (2,743 mm) 6.7 fpm 2.0 mpm 6.7 fpm 2.0 mpm
21" (533 mm) 59" (1,499 mm) 80" (2,032 mm)
120" (3,048 mm) 6.3 fpm 1.9 mpm 6.3 fpm 1.9 mpm
96" (2,438mm)
144" (3,658 mm) 5.8 fpm 1.8 mpm 5.8 fpm 1.8 mpm
* Capacities are based on evenly distributed loads. Single axle rolling load capacity is 80% of rated capacity across the ends and 50% of rated capacity across the sides.
** Nominal lift speeds with rated load - based on factory test conditions. fpm = feet per minute / mpm = meter per minute
Note: Consult factory for custom sizes and capacities. All dock lifts come with 18" (457 mm) long x 60" (1,524 mm) wide lip on rolling end.
Low-Profile Dock Lift
If you find forming a concrete pit/pad too costly, an economical
solution is a LoMaster™ Low-Profile Dock Lift. The unit is
installed at the dock face and mounted on locating cradles and
wear plates. With its extremely low profile, the unit provides
added versatility for ground level loading/unloading operations.
Optional Features
Safety
Electric toe guard protection
Warning horn with volume control
Flashing amber beacon light
Operation
Key switch on push button
Portable dolly Lift Speed Conversions for Optional Powerpacks
Lip: Aluminum, Spring Assist, Extended Length, Multiple 5 HP to 3 HP multiply lift speed by 0.4167
3-5 HP remote powerpacks 5 HP to 7-1/2 HP multiply lift speed by 1.29
Powerpack Specifications
Std. Powerpack Length Width Height Shipping Weight
3 HP 18" 457 mm 15" 381 mm 29" 737 mm 175 lb 80 kg
72" x 96" (1,829mm) x 2,438mm) 5" 55" 60" 20.1 fpm 20.1 fpm 6.1 mpm 14.2 fpm 4.3 mpm
72" x 120" (1,829mm) x 3,048mm) (127 mm) (1,397 mm) (1,524 mm) 6.1 mpm 14.2 fpm 4.3 mpm -
* Dimension between cylinder posts is 18" (457 mm) less than overall deck width.
** Capacities are based on evenly distributed loads. Single axle rolling load capacity is 50% of rated capacity across the ends and 20% of rated capacity across the sides.
*** Nominal lift speeds with rated load - based on factory test conditions. fpm = feet per minute / mpm = meter per minute
Note: Overall raised height = lowered height plus vertical travel. All dock lifts come with 18" (457 mm) long x 60" (1,524 mm) wide lip on rolling end.
Corporate 410 Admiral Blvd USA 6350 Burnt Poplar Road AUTHORIZED DEALER
Mississauga, ON, Canada L5T 2N6 Greensboro, NC 27409
t 905.457.3900 f 905.457.2313 www.bluegiant.com
Blue Giant offers a full line of dock levelers, dock safety equipment, seals and shelters, accessories, ergonomic and scissor lift equipment and industrial trucks. Concurrent with our continuing
product improvement program, specifications are subject to change without notice. Please contact Blue Giant for latest information. Some features illustrated may be optional in certain market areas.
If calling within North America: t 1.800.872.2583 f 1.888.378.5781 D-LMDL-011217 © Copyright Blue Giant Equipment Corporation 2017