300Hz Portable Display

User Manual-NG17FGQ

Scan the QR code or visit our link to

download the latest manual here:
www.nexigo.com
 Shape and Interface Distribu�on

HDMI
USB Type-A Full Func�on Type-C
Volume-/Brightness- Full Func�on Type-C
Power/Menu 3.5mm Headphone Interface
Volume+/Brightness+

What’s in the Box

Portable Display

Wall Charger IR Remote Foldable Stand Smart Cover

(Ba�ery included)

HDMI to HDMI Cord Type-C to Type-A Cord Type-C to Type-C Cord

1
 Devices Connec�on Instruc�ons
For maximum brightness and 1080P@300Hz display, please use the provided wall charger to
power the display, and make sure the interface of the connected device is full func�on Type-C.
1. Connect a computer using a full func�on USB Type-C port

1080P display

Type-C to Type-C

Wall Charger

1080P display

Type-C to Type-C

Note: For brightness and/or volume adjustments above 80% the display needs to be
connected to an external power supply in addi�on to the data signal. Any 5V/4A wall charger
will work.
2. Connect a phone using a full func�on USB Type-C port

Wall Charger

1080P display

Type-C to Type-C

When the device ba�ery drops below 30%, an external power supply is required for the
monitor to func�on. When the phone or other device's ba�ery is above 30%, the phone will
power the display and automa�cally ac�vate the energy saving mode on the monitor. This
will set the brightness of the display to low. You may adjust the display brightness and
volume as needed on your phone.

2
The refresh rate of HDMI connec�on can only reach up to 240Hz, and make sure the
interface of the connected device is HDMI 2.0/DP 1.4 or above.

3. Connect to a computer using a HDMI cable

Wall Charger

1080P display

HDMI to HDMI

The display is compa�ble with most HD devices using a HDMI cable. When connec�ng the
monitor to a computer using a HDMI cable, you will need to power the monitor first using
the provided wall charger. Please connect power before the HDMI signal.

4. Connect to other device using a HDMI cable

Wall Charger

1080P display

HDMI to HDMI

Wall Charger

1080P display

HDMI to HDMI

3
 Wall Charger

1080P display

HDMI to HDMI

Note: For proper func�onality with all devices, please connect the unit to the external power
if needed before connec�ng the data cable.

Reverse Charging Func�on

You can use the portable display to charge some devices via the full func�on USB Type-C port.
Simply connect your compa�ble device to the portable display, and then power the display
using the provided wall charger.
Device Compa�bility: Mobile Phone, iPad Pro, Laptop with PD protocol
Input Voltage: 5V~20V
Input Electric Current: 1A~4A

Wall Charger

1080P display

Type-C to Type-C

On Screen Display (OSD) Menu Introduc�on

Instruc�ons:
1. Open the OSD Menu by pressing the Power/Menu bu�on
2. Highlight the selected feature by scrolling up or down with the volume bu�ons
3. Open the selected menu sec�on by pressing the Power/Menu bu�on
4. Press and hold the Volume-/Brightness- bu�on to back out

4
PICTURE COLOR

AUDIO OTHER

INPUT

5
 Remote Introduc�on
1. Power Bu�on: Press to turn on/off the portable display
2. Mute Bu�on: Press to mute/unmute the portable
display's speaker
① ② 3. OK Bu�on: Press to select or confirm
⑩ 4. Se�ng Bu�on: Press to start the OSD menu
5. Return Bu�on: Press to return to the previous menu
③ 6. Source Bu�on: Press to access the input signal menu
⑧ 7. Image Bu�on: Press to switch among standard mode,
⑨
game mode, theater mode, photo mode, living mode, and
⑪ custom mode
8. Le� Bu�on: Press to move le� or decrease the
④ ⑤ speaker's volume
9. Right Bu�on: Press to move right or increase the
⑥ ⑦ speaker's volume
10. Up Bu�on: Press to move up or increase the brightness
11. Down Bu�on: Press to move down or decrease the
brightness
Note:
1. Please take out the plas�c sheet covering the ba�ery
before using the remote.
2. Press down the ba�ery cover by your thumb and rotate
it le�/right to open/close the ba�ery cover.
3. When you start the OSD menu, the arrow bu�ons work
as le�/right/up/down; When the OSD menu does not start,
the arrow bu�ons are used to adjust the volume and
brightness.
FAQ

Q1: Does this display require any addi�onal so�ware or drivers?

A: The NexiGo portable display does not require any addi�onal so�ware or drivers to use.
Simply plug your device into the display using the USB Type-C or HDMI cable, ensure that the
display is properly powered (HDMI connec�ons do not supply power, and USB Type-A
connec�on do not either), and you are good to go!

Q2: Can I use this display with the Playsta�on, Switch, or Xbox?
A: Yes, this display is compa�ble with any game console that has a HDMI or USB Type-C
output. For all of these systems you will need to connect the monitor to the HDMI output
port on the console, in addi�on to powering the display with one of the USB Type-C ports.

6
Q3: How long does the ba�ery last?
A: The NexiGo portable display does not have a built-in ba�ery for addi�onal flexibility when
traveling due to FAA regula�ons concerning ba�eries. The display instead pulls power directly
either from a wall plug, or from the device it is a�ached to through the USB Type-C connec�on.
As such, it will last as long as your device's ba�ery lasts. This dura�on can be extended through
the use of a portable charger or an external power supply.

Q4: My laptop or cellphone has a Type-C port but is not on the list of supported devices, will
this display s�ll work for me?
A: The NexiGo portable display has a wide range of compa�bility, so many devices are
compa�ble we cannot name them all. As such, to figure out if your device would work with this
display just determine if the item has a full featured USB Type-C port, or a HDMI port. If it has
one of these ports it will work with the display, though it may require an external power source.

Q5: Why does the screen's image have color defects or seem off?
A: Please inspect any cables that are plugged in to make sure that the pins are straight and not
bent. If they are bent, this may cause issues with the display.

Q6: My device is showing up in "Power supply mode" when connec�ng to the portable display.
Is this normal?
A: The monitor only draws a small amount of power from its signal source. This is a normal
result and nothing to worry about.

Q7: My screen image bounces or there's a wave pa�ern in the image, what should I do?
A: Please ensure that the signal cable is properly connected between the monitor and the output
device. If there is no issue with the cable and the display is s�ll having issues, please contact
NexiGo support for assistance.

Contact Informa�on
Website: www.nexigo.com Tel: +1(458) 215-6088
Manufacturer: Nexight INC Email: [email protected]
Address: 11075 SW 11th St, Beaverton, OR 97005, US

Get in touch with FREE online services.

facebook.com/letsnexigo