GS10 SMS COMMANDS

NO. SMS Name Format Reply

1 Status Check STATUS# acc:1,sf:0,gsm:6-31,gps:1-17
id:863019171376959 ip:WW9006.gpsog.com 9006
2 Parameter Check PARAM# apn:cmnet-user-password,phone:18201982253- ,time:10-
300-300
ID:863019171376959 Spd:000 T:20/8/5 6:23 bat:100
3 Lat. &Long. Check WHERE#
http://maps.google.com/maps?q=N31.38416,E121.42499
4 Version Check VERSION# GS10_WW_06_V_1_0_20200826
Add SOS Number
5 SOS,A,Number1,Number2,Number 3# SET OK
（With the area code）
Delete SOS Number
6 SOS,D,Number1,Number2,Number 3# SET OK
（With the area code）
Delay Defense setting
7 （A:1～ 60 min,set delay DEFENSE,A# SET OK
defense time；default setting is
10 min）
8 Query delay defense setting DEFENSE# DEFENSE:0
9 Device Reboot RESET# RESET OK
Vibration Alarm setting
（ M=0～3；Alam method,0
10 only Platf， SENALM,ON,M# SET OK
1 SMS+GPRS，
2 GPRS+SMS+CALL，
3 GPRS+CALL）
11 Turn off vibration alarm SENALM,OFF# SET OK
12 Query vibration setting SENALM# SENALM:1 CALL:0 SMS:0

Server setting:Domain setting SERVER,1,DOMAIN,PORT,0#

13 SET OK
(the last "0" stands for: TCP) SERVER,0,IP,PORT,0#

Center number setting

14 （You must first set up the SOS CENTER,A,86...# SET OK
number）
15 Delete center number CENTER,D# SET OK
16 Power off alarm Inquiry POWERALM# POWERALM:1 CALL:0 SMS:0
Turn off power off alarm
17 POWERALM,OFF# SET OK
(default setting is on)
Power on alarm setting
（ M=0～2；0 GPRS，
1 SMS +GPRS，
2 GPRS+SMS+CALL
18 2 GPRS+CALL POWERALM,A,M,T1,T2# SET OK
T1=2～60s（default setting is
5s）；
Power off time T2=0~3600s
（default setting is 30s）；）
19 Query relay control status RELAY# RELAY:0
Relay setting（ A=0/1；0 power
on,1 power off ;
20 Send instructions from the RELAY,A# OK
phone where the center number
is located）
HBT,T1,T2#
T1=1～600min，ACC ON Heartbeat packet
21 Set the heartbeat packet interval upload interval SET OK
T2=1～600min，ACC OFF Heartbeat packet
upload interval
22 Query the heartbeat interval HBT# HBT:5,5
Vibration sensitivity setting
23 (Value range: 0-255, 5 is the SENSORRANGE,5# SET OK
existing default reference value)
24 Vibration sensitivity inquiry SENSORRANGE# SENSORRANGE:5
Timer,T1,T2#
T1=5~60s, Time interval of
GPS data be uploaded when
25 ACC is on TIMER,T1,T2# SET OK
T2=5~60s, Time interval of
GPS data be uploaded when
ACC is off
Time interval of GPS data be
26 TIMER# TIMER,10,10#
uploaded
SENSOR CONTROL GPS
27 （A=0-300 minutes 0 stands for SENDS,A# SET OK
GPS always on）
28 Query SENSOR Control GPS SENDS# SENDS:5
 Low battery alarm seetting
(M=0～3
29 0 GPRS， BATALM,ON,M# SET OK
1 GPRS+SMS
2 GPRS+SMS+CALL
3 GPRS+CALL)
30 Turn off low battery alarm BATALM,OFF# SET OK
31 Query low battery alarm BATALM# BATALM:1 SMS:1 CALL:0
Over Speed Alarm
(B=5～600 S； C=1～
255km/h；
M=0～3；Alam methods，
32 SPEED,ON,B,C,M# SET OK
0 GPRS，
1 SMS +GPRS；
2 GPRS+SMS+CALL
3 GPRS+CALL)
33 Turn off overspeed alarm SPEED,OFF# SET OK
34 Query over speed alarm SPEED# speed:0-0-0 SMS:0 CALL:1
ID:863019171376953 Spd:000 T:20/8/26 7:16 bat:100
35 Query map connection URL#
http://maps.google.com/maps?q=N31.38416,E121.42483
Setting SOS Alarm
M=0～3；
36 0 GPRS， KEYALM,ON,M# SET OK
1 SMS +GPRS；
2 GPRS+SMS+CALL
3 GPRS+CALL)
37 APN Setting APN,APN name# APN:CMNET,,
Time Zone setting
A：E/W；E timezone，W
timezone；default：E
38 B：0～12；timezone；default： GMT,A,B,C# OK!The terminal will restart after 30 seconds!
8
C：0/15/30/45；half timezone；
default：0
Query the current parameter
39 GMT# Currently Timezone(GMT):E,8,0
Settings
40 External voltage detection POWERLEVEL# OK,level:12.500000
41 Turn off ACC alarm ACCALM,OFF# SET OK
ACC Change Alarm
M=0～3；
0 GPRS，
42 ACCALM,ON,M# OK;SW=1,MODE=2;
1 SMS +GPRS；
2 GPRS+SMS+CALL
3 GPRS+CALL)