Scribd Logo
Upload

Welcome to Scribd!

  • 15 views

    Quintolubric® 888 68

    Uploaded by

    Cédric LOUIS
    This document provides technical data and information about Quintolubric 888-68, a fire resistant hydraulic fluid. It describes the fluid's applications and benefits, typical properties, performance, compatibility, and engineering data.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Quintolubric® 888 68

    Uploaded by

    Cédric LOUIS
    15 views2 pages
    This document provides technical data and information about Quintolubric 888-68, a fire resistant hydraulic fluid. It describes the fluid's applications and benefits, typical properties, performance, compatibility, and engineering data.

    Original Title

    QUINTOLUBRIC®-888-68

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical data and information about Quintolubric 888-68, a fire resistant hydraulic fluid. It describes the fluid's applications and benefits, typical properties, performance, compatibility, and engineering data.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    15 views2 pages

    Quintolubric® 888 68

    Uploaded by

    Cédric LOUIS
    This document provides technical data and information about Quintolubric 888-68, a fire resistant hydraulic fluid. It describes the fluid's applications and benefits, typical properties, performance, compatibility, and engineering data.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Q U A K E R H F D F L U I D S

    Technical Data

    QUINTOLUBRIC® 888-68
    Fire Resistant Hydraulic Fluid
    APPLICATIONS
    QUINTOLUBRIC® 888-68 was designed to replace anti-wear,
    mineral oil-based hydraulic fluids used in applications where
    fire hazards exist. QUINTOLUBRIC® 888-68 can also be used
    in environmentally sensitive hydraulic applications without
    compromising the overall hydraulic system operations. This
    fluid does not contain water, mineral oil, or phosphate ester,
    and is based on high-quality, synthetic, organic esters and
    carefully selected additives to achieve excellent hydraulic TYPICAL PROPERTIES
    fluid performance. QUINTOLUBRIC® 888-68 offers the
    lubrication level of premium, anti-wear hydraulic oils, and PROPERTIES 888-68
    can be used with hydraulic components from all major (Test Method) (013725)
    manufacturers. Appearance Yellow to amber fluid
    Kinematic Viscosity (ASTM D 445)
    BENEFITS At 0OC 485 mm2 /s or cSt
    At 20OC 150 mm2 /s or cSt
    • Fire-resistant At 40OC 68 mm2 /s or cSt
    • High ignition temperature and low heat release At 100OC 14 mm2 /s or cSt
    • Properties that limit the spread of fire
    Viscosity Index (ASTM D 2270) 215
    • Excellent shear stability
    • Approved by Factory Mutual Approvals Density at 15OC (ASTM D 1298) 0.92 g/cm3
    • Non-toxic / non-toxic to aquatic life 1.5 mg KOH/g
    Acid Number (ASTM D 974)
    • Non-irritating
    • Fully biodegradable Pour Point (ASTM D 97) < -30OC (< -22OF)
    • Simple waste treatment Foam Test at 25oC (ASTM D 892) 50-0 ml-ml
    Sequence I
    PERFORMANCE Corrosion Protection
    ISO 4404-2 Pass
    ASTM D 665 A Pass
    Properly maintained QUINTOLUBRIC 888-68 has a use- ®
    ASTM D 130 1a
    ful life comparable to that of mineral oil fluids. Specific fluid
    lifetime depends primarily on temperature as shown in the Flash Point (ASTM D 92) 304OC (579OF)
    graph. Fire Point (ASTM D 92) 360OC (680OF)
    Life Expectancy of QUINTOLUBRIC® 888-68 Auto Ignition Temperature (DIN 51794) >400OC (>752OF)
    100000
    Air Release (ASTM D 3427) 7 min.
    10000 Fire Resistance (FM Approvals) Approved
    Lifetime (hours)

    1000 Pump Test (ASTM D 2882) <5 mg wear

    100
    Gear Lubrication (DIN 51354-2) >12 FZG load stage
    42-38-0 (30)
    10 Water Separability (ASTM D 1401) ml-ml-ml (min.)
    1
    0 20 40 60 80 100 120 140 160 180 200

    Temperature ( C)
    o
    quintolubric.com
    quakerchem.com
    Q U A K E R H F D F L U I D S

    QUINTOLUBRIC® 888-68
    Fire Resistant Hydraulic Fluid
    COMPATIBILITY

    The following chart contains our recommendations Paints and Coatings


    regarding the use of QUINTOLUBRIC® 888-68 with commonly QUINTOLUBRIC® 888-68 is compatible with multi-component
    used elastomers. The elastomer applications listed are epoxy coatings. It is not compatible with zinc-based coatings.
    “Static,” which refers to trapped nonmoving seals such as Specific coating and application recommendations can be
    O-rings in valve sub-plates and rigid, low pressure hose obtained from coating manufacturers or directly from Quaker
    connections; “Mild-Dynamic,” whose applications include Chemical.
    accumulator bladders and hose linings where the hoses are
    exposed to high pressure and light flexing; and “Dynamic,” Fluids
    which refers to cylinder rod seals, pump shaft seals and QUINTOLUBRIC® 888-68 is compatible and miscible with
    constantly flexing hydraulic hose. nearly all mineral oil and polyolester-type hydraulic fluids and
    with some, but not all, phosphate esters. It is not miscible
    Elastomers or compatible with water-containing fluids. For conversion
    recommendations, please contact Quaker.
    ISO MILD
    1629 DESCRIPTION STATIC DYNAMIC DYNAMIC
    Medium to high nitrile ENGINEERING DATA
    NBR rubber (Buna N, C C C
    >30% acrylonitrile)
    QUINTOLUBRIC®
    FPM Fluoroelastomer (Viton®) C C C PROPERTIES METHOD 888-68
    CR Neoprene S S S 2.06 kJ/kg OC
    Specific Heat at 20OC ASTM D 2766
    .49 Btu/lb OF
    IIR Butyl rubber S N N
    Coefficient of Thermal
    Ethylene propylene ASTM D 1903 6 X 10-4 per OC
    EPDM N N N Expansion at 20OC
    rubber
    Vapor Pressure
    PU Polyurethane C C C ASTM 02551 3.2 X 10-6 mmHg
    At 20OC
    Teflon® C C C At 66OC 7.5 X10-6 mm Hg
    PTFE
    Bulk Modulus at 20OC
    C = Compatible 1.87 X 105 N/cm2
    S = Satisfactory for short term use, but replacement with a completely At 210 bar
    compatible elastomer is recommended at the earliest convenience. At 3,000 psi 266,900 psi
    N = Not Compatible
    Thermal Conductivity ASTM D 2717 0.167 J/sec/m/OC
    at 19OC
    Metals Dielectric Breakdown ASTM D 877 30 kV
    QUINTOLUBRIC® 888-68 is compatible with iron and steel Voltage
    alloys and most nonferrous metals and their alloys. It is not
    compatible with lead, cadmium, zinc, and alloys containing *Country-specific MSDS are available.
    high levels of these metals. Suitable substitutes for these
    materials are available and should be used.

    quintolubric.com
    quakerchem.com

    You might also like