Autodesk PowerMill 2019

User Guide
Toolpath Point Parameters
Contents
Overview 1
Toolpath point parameter functions 2
Sample macros ................................................................................................... 4

Using Toolpath Point Parameters mode 5

Segment and point identifiers 8
Postprocessor requirements 9
Autodesk Legal Notice 10

Autodesk PowerMill 2019 Contents • i

Overview

Toolpath point parameters are user-defined attributes, with

associated values, attached to individual points along a toolpath.
They enable you to apply custom instructions to individual points
along a toolpath, to control different types of machines, such as:
 Laser cutters
 Water jet cutters
 Paint sprayers
 Additive machines

If you add parameters to toolpath points, you must update

your postprocessor to process these parameters (see page 9).
For example, when using a laser cutter you may need to vary the
intensity of the beam at certain points in the toolpath:

— At the start, turn on the laser to a power of 90%.

— 10mm from the start, turn the laser power to 100%.
— 10mm from the end, turn the laser power to 90%.
— At the end, turn the laser off.

Autodesk PowerMill 2019 Overview • 1

Toolpath point parameter
functions

You can use the following toolpath point parameter functions in a

macro, or by typing them into a command window:
Description Function
Returns the number of int toolpath_segment_count( ent
segments on the referenced ity ref)
toolpath.
Returns the number of points int segment_point_count( entity
on the n'th segment of the ref, int n)
referenced toolpath.
Returns the length of the n'th real segment_get_length( entity
segment of the referenced ref, int n)
toolpath.
Returns the id of the point int segment_get_point_at_distan
distance ± tolerance from the ce( entity ref, int n, real
start of the n'th segment on distance, real tolerance)
the referenced toolpath.
Creates a point at distance int segment_create_point_at_dis
from the start of the n'th tance( entity ref, int n, real
segment on the referenced distance, real tolerance)
toolpath. If there is an
existing point within tolerance
of this point then no new
point is created. Returns the
id of the newly created or
existing point.

2 • Toolpath point parameter functions User Guide

 Returns a map of parameters int point_parameters( entity
on the m'th point on the n'th ref, int n, int m)
segment of the referenced
toolpath.
Adds a parameter named key int point_add_parameter( entity
with value value to the m'th ref, int n, int m, string key,
point on the n'th segment of string value)
the referenced toolpath.
Remove parameter named int point_remove_parameter( ent
key from the m'th point on ity ref, int n, int m, string
the n'th segment of the key)
referenced toolpath.
Remove all parameters from int point_remove_parameters( en
the m'th point on the n'th tity ref, int n, int m)
segment of the referenced
toolpath.
Returns the geometric point OBJECT
on a toolpath which is closest closest_point_on_toolpath(ENTIT
to a given point in space. Y toolpath, POINT point)

Autodesk PowerMill 2019 Toolpath point parameter functions • 3

 Sample macros
This example adds a parameter called laser to every toolpath point
and the parameter's value increases by ten, from one point to the
next.

Points can have more than one parameter, or they can have
no parameters at all.
int segments = toolpath_segment_count("toolpath", "1")
int segment = 0
int error = 0

while $segment < $segments {

int points = segment_point_count("toolpath", "1",
$segment)
int point = 0
int power = 0

while $point < $points {

$error = point_add_parameter("toolpath", "1",
$segment, $point, "laser", $power)
$point = $point + 1
$power = $power + 10
}

$segment = $segment + 1
}

4 • Toolpath point parameter functions User Guide

Using Toolpath Point
Parameters mode

The toolpath point parameter functionality is mainly macro-driven.

However, you can enter the following command to start the
Toolpath Point Parameters mode to work with toolpath point
parameters interactively:
EDIT TOOLPATH POINT_PARAMETERS DISPLAY

You must have an active toolpath to enter this mode.

When in Toolpath Process Parameters mode, you can use the
Toolpath Process Parameters tab.

Autodesk PowerMill 2019 Using Toolpath Point Parameters mode • 5

 The Process Parameters dialog is also available:

The Filters area and Layers list is only used for strategies
calculated from the PowerMill Additive plugin.
The Process Parameters dialog enables you to select a point and
view its parameters.

Points with parameters are red and points with no parameters are
blue. The selected point is surrounded by a yellow circle. For
example, 0:10 where the first number (0) is the segment number
and the second (10) the point number.

— Displays the distance of the selected point from the start of

the toolpath segment.

6 • Using Toolpath Point Parameters mode User Guide

 — Displays the distance of the selected point from the end of the
toolpath segment.
To view process parameters:
1 Select an Output Tag from the list. The Points list displays all the
points that have the selected Tag applied to it.

2 Click under a column to delete the process parameters from

the points in your selection from that column.
Click Toolpath Point Parameters tab > Finish panel >Accept to exit
the Toolpath Point Parameters mode.

Autodesk PowerMill 2019 Using Toolpath Point Parameters mode • 7

Segment and point
identifiers

When using toolpath point parameters, it is important to understand

how segment and point identifiers work:
 Segment and point identifiers use zero-based indexing. This
means the first point or segment has a value of 0. If a toolpath
has 10 segments, then the segment identifiers are 0 to 9
inclusive. Similarly, if a segment has 8 points then the point
identifiers are in the range 0 to 7 inclusive.
 Segment and point identifiers are transitory, not fixed. So, if you
create a new point, all the points after the additional point are
renumbered.
In this example, a new point is inserted between points 4 and 5.
In the updated toolpath segment, all points after point 4 have
new identifiers. Because the number of points has also changed,
a cached value from segment_point_count() is no longer
correct.

Do not use any previously stored point identifiers or point

counts after inserting a new point.

8 • Segment and point identifiers User Guide

Postprocessor
requirements

To use the parameters added to a toolpath point, you must update

your postprocessor option file.
For example, if you create a parameter laser, you must modify your
option file to include udp_laser.

Autodesk PowerMill 2019 Postprocessor requirements • 9

Autodesk Legal Notice

© 2018 Autodesk, Inc. All Rights Reserved. Except where otherwise

noted, this work is licensed under a Creative Commons Attribution-
NonCommercial-ShareAlike 3.0 Unported License that can be
viewed online at http://creativecommons.org/licenses/by-nc-
sa/3.0/. This license content, applicable as of 16 December 2014 to
this software product, is reproduced here for offline users:
CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND
DOES NOT PROVIDE LEGAL SERVICES. DISTRIBUTION OF THIS
LICENSE DOES NOT CREATE AN ATTORNEY-CLIENT RELATIONSHIP.
CREATIVE COMMONS PROVIDES THIS INFORMATION ON AN "AS-
IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES
REGARDING THE INFORMATION PROVIDED, AND DISCLAIMS
LIABILITY FOR DAMAGES RESULTING FROM ITS USE.

License
THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS
OF THIS CREATIVE COMMONS PUBLIC LICENSE ("CCPL" OR
"LICENSE"). THE WORK IS PROTECTED BY COPYRIGHT AND/OR
OTHER APPLICABLE LAW. ANY USE OF THE WORK OTHER THAN AS
AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS
PROHIBITED.
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HERE, YOU
ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS
LICENSE. TO THE EXTENT THIS LICENSE MAY BE CONSIDERED TO
BE A CONTRACT, THE LICENSOR GRANTS YOU THE RIGHTS
CONTAINED HERE IN CONSIDERATION OF YOUR ACCEPTANCE OF
SUCH TERMS AND CONDITIONS.
1. Definitions

10 • Autodesk Legal Notice User Guide

 a. "Adaptation" means a work based upon the Work, or upon the
Work and other pre-existing works, such as a translation,
adaptation, derivative work, arrangement of music or other
alterations of a literary or artistic work, or phonogram or
performance and includes cinematographic adaptations or any
other form in which the Work may be recast, transformed, or
adapted including in any form recognizably derived from the
original, except that a work that constitutes a Collection will not
be considered an Adaptation for the purpose of this License. For
the avoidance of doubt, where the Work is a musical work,
performance or phonogram, the synchronization of the Work in
timed-relation with a moving image ("synching") will be
considered an Adaptation for the purpose of this License.
b. "Collection" means a collection of literary or artistic works,
such as encyclopedias and anthologies, or performances,
phonograms or broadcasts, or other works or subject matter
other than works listed in Section 1(g) below, which, by reason
of the selection and arrangement of their contents, constitute
intellectual creations, in which the Work is included in its entirety
in unmodified form along with one or more other contributions,
each constituting separate and independent works in themselves,
which together are assembled into a collective whole. A work
that constitutes a Collection will not be considered an Adaptation
(as defined above) for the purposes of this License.
c. "Distribute" means to make available to the public the original
and copies of the Work or Adaptation, as appropriate, through
sale or other transfer of ownership.
d. "License Elements" means the following high-level license
attributes as selected by Licensor and indicated in the title of this
License: Attribution, Noncommercial, ShareAlike.
e. "Licensor" means the individual, individuals, entity or entities
that offer(s) the Work under the terms of this License.
f. "Original Author" means, in the case of a literary or artistic
work, the individual, individuals, entity or entities who created
the Work or if no individual or entity can be identified, the
publisher; and in addition (i) in the case of a performance the
actors, singers, musicians, dancers, and other persons who act,
sing, deliver, declaim, play in, interpret or otherwise perform
literary or artistic works or expressions of folklore; (ii) in the
case of a phonogram the producer being the person or legal
entity who first fixes the sounds of a performance or other
sounds; and, (iii) in the case of broadcasts, the organization that
transmits the broadcast.

Autodesk PowerMill 2019 Autodesk Legal Notice • 11

 g. "Work" means the literary and/or artistic work offered under
the terms of this License including without limitation any
production in the literary, scientific and artistic domain, whatever
may be the mode or form of its expression including digital form,
such as a book, pamphlet and other writing; a lecture, address,
sermon or other work of the same nature; a dramatic or
dramatico-musical work; a choreographic work or entertainment
in dumb show; a musical composition with or without words; a
cinematographic work to which are assimilated works expressed
by a process analogous to cinematography; a work of drawing,
painting, architecture, sculpture, engraving or lithography; a
photographic work to which are assimilated works expressed by
a process analogous to photography; a work of applied art; an
illustration, map, plan, sketch or three-dimensional work relative
to geography, topography, architecture or science; a
performance; a broadcast; a phonogram; a compilation of data
to the extent it is protected as a copyrightable work; or a work
performed by a variety or circus performer to the extent it is not
otherwise considered a literary or artistic work.
h. "You" means an individual or entity exercising rights under
this License who has not previously violated the terms of this
License with respect to the Work, or who has received express
permission from the Licensor to exercise rights under this
License despite a previous violation.
i. "Publicly Perform" means to perform public recitations of the
Work and to communicate to the public those public recitations,
by any means or process, including by wire or wireless means or
public digital performances; to make available to the public
Works in such a way that members of the public may access
these Works from a place and at a place individually chosen by
them; to perform the Work to the public by any means or
process and the communication to the public of the performances
of the Work, including by public digital performance; to
broadcast and rebroadcast the Work by any means including
signs, sounds or images.
j. "Reproduce" means to make copies of the Work by any means
including without limitation by sound or visual recordings and the
right of fixation and reproducing fixations of the Work, including
storage of a protected performance or phonogram in digital form
or other electronic medium.
2. Fair Dealing Rights. Nothing in this License is intended to reduce,
limit, or restrict any uses free from copyright or rights arising from
limitations or exceptions that are provided for in connection with the
copyright protection under copyright law or other applicable laws.

12 • Autodesk Legal Notice User Guide

 3. License Grant. Subject to the terms and conditions of this License,
Licensor hereby grants You a worldwide, royalty-free, non-
exclusive, perpetual (for the duration of the applicable copyright)
license to exercise the rights in the Work as stated below:
a. to Reproduce the Work, to incorporate the Work into one or
more Collections, and to Reproduce the Work as incorporated in
the Collections;
b. to create and Reproduce Adaptations provided that any such
Adaptation, including any translation in any medium, takes
reasonable steps to clearly label, demarcate or otherwise identify
that changes were made to the original Work. For example, a
translation could be marked "The original work was translated
from English to Spanish," or a modification could indicate "The
original work has been modified.";
c. to Distribute and Publicly Perform the Work including as
incorporated in Collections; and,
d. to Distribute and Publicly Perform Adaptations.
The above rights may be exercised in all media and formats
whether now known or hereafter devised. The above rights include
the right to make such modifications as are technically necessary to
exercise the rights in other media and formats. Subject to Section
8(f), all rights not expressly granted by Licensor are hereby
reserved, including but not limited to the rights described in Section
4(e).
4. Restrictions. The license granted in Section 3 above is expressly
made subject to and limited by the following restrictions:

Autodesk PowerMill 2019 Autodesk Legal Notice • 13

 a. You may Distribute or Publicly Perform the Work only under
the terms of this License. You must include a copy of, or the
Uniform Resource Identifier (URI) for, this License with every
copy of the Work You Distribute or Publicly Perform. You may not
offer or impose any terms on the Work that restrict the terms of
this License or the ability of the recipient of the Work to exercise
the rights granted to that recipient under the terms of the
License. You may not sublicense the Work. You must keep intact
all notices that refer to this License and to the disclaimer of
warranties with every copy of the Work You Distribute or Publicly
Perform. When You Distribute or Publicly Perform the Work, You
may not impose any effective technological measures on the
Work that restrict the ability of a recipient of the Work from You
to exercise the rights granted to that recipient under the terms of
the License. This Section 4(a) applies to the Work as
incorporated in a Collection, but this does not require the
Collection apart from the Work itself to be made subject to the
terms of this License. If You create a Collection, upon notice from
any Licensor You must, to the extent practicable, remove from
the Collection any credit as required by Section 4(d), as
requested. If You create an Adaptation, upon notice from any
Licensor You must, to the extent practicable, remove from the
Adaptation any credit as required by Section 4(d), as requested.
b. You may Distribute or Publicly Perform an Adaptation only
under: (i) the terms of this License; (ii) a later version of this
License with the same License Elements as this License; (iii) a
Creative Commons jurisdiction license (either this or a later
license version) that contains the same License Elements as this
License (e.g., Attribution-NonCommercial-ShareAlike 3.0 US)
("Applicable License"). You must include a copy of, or the URI,
for Applicable License with every copy of each Adaptation You
Distribute or Publicly Perform. You may not offer or impose any
terms on the Adaptation that restrict the terms of the Applicable
License or the ability of the recipient of the Adaptation to
exercise the rights granted to that recipient under the terms of
the Applicable License. You must keep intact all notices that refer
to the Applicable License and to the disclaimer of warranties with
every copy of the Work as included in the Adaptation You
Distribute or Publicly Perform. When You Distribute or Publicly
Perform the Adaptation, You may not impose any effective
technological measures on the Adaptation that restrict the ability
of a recipient of the Adaptation from You to exercise the rights
granted to that recipient under the terms of the Applicable
License. This Section 4(b) applies to the Adaptation as
incorporated in a Collection, but this does not require the
Collection apart from the Adaptation itself to be made subject to
the terms of the Applicable License.

14 • Autodesk Legal Notice User Guide

 c. You may not exercise any of the rights granted to You in
Section 3 above in any manner that is primarily intended for or
directed toward commercial advantage or private monetary
compensation. The exchange of the Work for other copyrighted
works by means of digital file-sharing or otherwise shall not be
considered to be intended for or directed toward commercial
advantage or private monetary compensation, provided there is
no payment of any monetary compensation in connection with
the exchange of copyrighted works.
d. If You Distribute, or Publicly Perform the Work or any
Adaptations or Collections, You must, unless a request has been
made pursuant to Section 4(a), keep intact all copyright notices
for the Work and provide, reasonable to the medium or means
You are utilizing: (i) the name of the Original Author (or
pseudonym, if applicable) if supplied, and/or if the Original
Author and/or Licensor designate another party or parties (e.g.,
a sponsor institute, publishing entity, journal) for attribution
("Attribution Parties") in Licensor's copyright notice, terms of
service or by other reasonable means, the name of such party or
parties; (ii) the title of the Work if supplied; (iii) to the extent
reasonably practicable, the URI, if any, that Licensor specifies to
be associated with the Work, unless such URI does not refer to
the copyright notice or licensing information for the Work; and,
(iv) consistent with Section 3(b), in the case of an Adaptation, a
credit identifying the use of the Work in the Adaptation (e.g.,
"French translation of the Work by Original Author," or
"Screenplay based on original Work by Original Author"). The
credit required by this Section 4(d) may be implemented in any
reasonable manner; provided, however, that in the case of a
Adaptation or Collection, at a minimum such credit will appear, if
a credit for all contributing authors of the Adaptation or
Collection appears, then as part of these credits and in a manner
at least as prominent as the credits for the other contributing
authors. For the avoidance of doubt, You may only use the credit
required by this Section for the purpose of attribution in the
manner set out above and, by exercising Your rights under this
License, You may not implicitly or explicitly assert or imply any
connection with, sponsorship or endorsement by the Original
Author, Licensor and/or Attribution Parties, as appropriate, of
You or Your use of the Work, without the separate, express prior
written permission of the Original Author, Licensor and/or
Attribution Parties.
e. For the avoidance of doubt:

Autodesk PowerMill 2019 Autodesk Legal Notice • 15

 i. Non-waivable Compulsory License Schemes. In those
jurisdictions in which the right to collect royalties through any
statutory or compulsory licensing scheme cannot be waived,
the Licensor reserves the exclusive right to collect such
royalties for any exercise by You of the rights granted under
this License;
ii. Waivable Compulsory License Schemes. In those
jurisdictions in which the right to collect royalties through any
statutory or compulsory licensing scheme can be waived, the
Licensor reserves the exclusive right to collect such royalties
for any exercise by You of the rights granted under this
License if Your exercise of such rights is for a purpose or use
which is otherwise than noncommercial as permitted under
Section 4(c) and otherwise waives the right to collect royalties
through any statutory or compulsory licensing scheme; and,
iii. Voluntary License Schemes. The Licensor reserves the right
to collect royalties, whether individually or, in the event that
the Licensor is a member of a collecting society that
administers voluntary licensing schemes, via that society,
from any exercise by You of the rights granted under this
License that is for a purpose or use which is otherwise than
noncommercial as permitted under Section 4(c).
f. Except as otherwise agreed in writing by the Licensor or as
may be otherwise permitted by applicable law, if You Reproduce,
Distribute or Publicly Perform the Work either by itself or as part
of any Adaptations or Collections, You must not distort, mutilate,
modify or take other derogatory action in relation to the Work
which would be prejudicial to the Original Author's honor or
reputation. Licensor agrees that in those jurisdictions (e.g.
Japan), in which any exercise of the right granted in Section 3(b)
of this License (the right to make Adaptations) would be deemed
to be a distortion, mutilation, modification or other derogatory
action prejudicial to the Original Author's honor and reputation,
the Licensor will waive or not assert, as appropriate, this Section,
to the fullest extent permitted by the applicable national law, to
enable You to reasonably exercise Your right under Section 3(b)
of this License (right to make Adaptations) but not otherwise.
5. Representations, Warranties and Disclaimer

16 • Autodesk Legal Notice User Guide

 UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN
WRITING AND TO THE FULLEST EXTENT PERMITTED BY APPLICABLE
LAW, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING
THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER
DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS,
WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THIS
EXCLUSION MAY NOT APPLY TO YOU.
6. Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY
APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU
ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL,
CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING
OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF
LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
7. Termination
a. This License and the rights granted hereunder will terminate
automatically upon any breach by You of the terms of this
License. Individuals or entities who have received Adaptations or
Collections from You under this License, however, will not have
their licenses terminated provided such individuals or entities
remain in full compliance with those licenses. Sections 1, 2, 5, 6,
7, and 8 will survive any termination of this License.
b. Subject to the above terms and conditions, the license granted
here is perpetual (for the duration of the applicable copyright in
the Work). Notwithstanding the above, Licensor reserves the
right to release the Work under different license terms or to stop
distributing the Work at any time; provided, however that any
such election will not serve to withdraw this License (or any
other license that has been, or is required to be, granted under
the terms of this License), and this License will continue in full
force and effect unless terminated as stated above.
8. Miscellaneous

Autodesk PowerMill 2019 Autodesk Legal Notice • 17

 a. Each time You Distribute or Publicly Perform the Work or a
Collection, the Licensor offers to the recipient a license to the
Work on the same terms and conditions as the license granted to
You under this License.
b. Each time You Distribute or Publicly Perform an Adaptation,
Licensor offers to the recipient a license to the original Work on
the same terms and conditions as the license granted to You
under this License.
c. If any provision of this License is invalid or unenforceable
under applicable law, it shall not affect the validity or
enforceability of the remainder of the terms of this License, and
without further action by the parties to this agreement, such
provision shall be reformed to the minimum extent necessary to
make such provision valid and enforceable.
d. No term or provision of this License shall be deemed waived
and no breach consented to unless such waiver or consent shall
be in writing and signed by the party to be charged with such
waiver or consent.
e. This License constitutes the entire agreement between the
parties with respect to the Work licensed here. There are no
understandings, agreements or representations with respect to
the Work not specified here. Licensor shall not be bound by any
additional provisions that may appear in any communication
from You. This License may not be modified without the mutual
written agreement of the Licensor and You.
f. The rights granted under, and the subject matter referenced,
in this License were drafted utilizing the terminology of the Berne
Convention for the Protection of Literary and Artistic Works (as
amended on September 28, 1979), the Rome Convention of
1961, the WIPO Copyright Treaty of 1996, the WIPO
Performances and Phonograms Treaty of 1996 and the Universal
Copyright Convention (as revised on July 24, 1971). These rights
and subject matter take effect in the relevant jurisdiction in
which the License terms are sought to be enforced according to
the corresponding provisions of the implementation of those
treaty provisions in the applicable national law. If the standard
suite of rights granted under applicable copyright law includes
additional rights not granted under this License, such additional
rights are deemed to be included in the License; this License is
not intended to restrict the license of any rights under applicable
law.

Creative Commons Notice

18 • Autodesk Legal Notice User Guide

 Creative Commons is not a party to this License, and makes no
warranty whatsoever in connection with the Work. Creative
Commons will not be liable to You or any party on any legal theory
for any damages whatsoever, including without limitation any
general, special, incidental or consequential damages arising in
connection to this license. Notwithstanding the foregoing two (2)
sentences, if Creative Commons has expressly identified itself as
the Licensor hereunder, it shall have all rights and obligations of
Licensor.
Except for the limited purpose of indicating to the public that the
Work is licensed under the CCPL, Creative Commons does not
authorize the use by either party of the trademark "Creative
Commons" or any related trademark or logo of Creative Commons
without the prior written consent of Creative Commons. Any
permitted use will be in compliance with Creative Commons' then-
current trademark usage guidelines, as may be published on its
website or otherwise made available upon request from time to
time. For the avoidance of doubt, this trademark restriction does
not form part of this License.
Creative Commons may be contacted at
http://creativecommons.org/.
Certain materials included in this publication are reprinted with the
permission of the copyright holder.

Creative Commons FAQ

Autodesk's Creative Commons FAQ can be viewed online at
http://www.autodesk.com/company/creative-commons, and is
reproduced here for offline users.
In collaboration with Creative Commons, Autodesk invites you to
share your knowledge with the rest of the world, inspiring others to
learn, achieve goals, and ignite creativity. You can freely borrow
from the Autodesk Help, Support and Video libraries to build a new
learning experience for anyone with a particular need or interest.
What is Creative Commons?
Creative Commons (CC) is a nonprofit organization that offers a
simple licensing model that frees digital content to enable anyone to
modify, remix, and share creative works.
How do I know if Autodesk learning content and Autodesk University
content is available under Creative Commons?
All Autodesk learning content and Autodesk University content
released under Creative Commons is explicitly marked with a
Creative Commons icon specifying what you can and cannot do.
Always follow the terms of the stated license.

Autodesk PowerMill 2019 Autodesk Legal Notice • 19

 What Autodesk learning content is currently available under Creative
Commons?
Over time, Autodesk will release more and more learning content
under the Creative Commons licenses.
Currently available learning content:
 Autodesk online help-Online help for many Autodesk products,
including its embedded media such as images and help movies.
 Autodesk Learning Videos-A range of video-based learning
content, including the video tutorials on the Autodesk YouTube™
Learning Channels and their associated iTunes® podcasts.
 Autodesk downloadable materials-Downloadable 3D assets,
digital footage, and other files you can use to follow along on
your own time.
Is Autodesk learning and support content copyrighted?
Yes. Creative Commons licensing does not replace copyright.
Copyright remains with Autodesk or its suppliers, as applicable. But
it makes the terms of use much more flexible.
What do the Autodesk Creative Commons licenses allow?
Autodesk makes some of its learning and support content available
under two distinct Creative Commons licenses. The learning content
is clearly marked with the applicable Creative Commons license. You
must comply with the following conditions:
 Attribution-NonCommercial-ShareAlike (CC BY-NC-SA) This license
lets you copy, distribute, display, remix, tweak, and build upon
our work noncommercially, as long as you credit Autodesk and
license your new creations under the identical terms.
 Attribution-NonCommercial-No Derivative Works (CC BY-NC-ND)
This license lets you copy, distribute, and display only verbatim
copies of our work as long as you credit us, but you cannot alter
the learning content in any way or use it commercially.
 Special permissions on content marked as No Derivative Works For
video-based learning content marked as No Derivative Works
(ND), Autodesk grants you special permission to make
modifications but only for the purpose of translating the video
content into another language.
These conditions can be modified only by explicit permission of
Autodesk, Inc. Send requests for modifications outside of these
license terms to [email protected].

20 • Autodesk Legal Notice User Guide

 Can I get special permission to do something different with the learning
content?
Unless otherwise stated, our Creative Commons conditions can be
modified only by explicit permission of Autodesk, Inc. If you have
any questions or requests for modifications outside of these license
terms, email us at [email protected].
How do I attribute Autodesk learning content?
You must explicitly credit Autodesk, Inc., as the original source of
the materials. This is a standard requirement of the Attribution (BY)
term in all Creative Commons licenses. In some cases, such as for
the Autodesk video learning content, we specify exactly how we
would like to be attributed.
This is usually described on the video's end-plate. For the most part
providing the title of the work, the URL where the work is hosted,
and a credit to Autodesk, Inc., is quite acceptable. Also, remember
to keep intact any copyright notice associated with the work. This
may sound like a lot of information, but there is flexibility in the way
you present it.
Here are some examples:
"This document contains content adapted from the Autodesk®
Maya® Help, available under a Creative Commons Attribution-
NonCommercial-Share Alike license. Copyright © Autodesk, Inc."
"This is a Finnish translation of a video created by the Autodesk
Maya Learning Channel @ www.youtube.com/mayahowtos.
Copyright © Autodesk, Inc."
"Special thanks to the Autodesk® 3ds Max® Learning Channel @
www.youtube.com/3dsmaxhowtos. Copyright © Autodesk, Inc."
Do I follow YouTube's standard license or Autodesk's Creative
Commons license?
The videos of the Autodesk Learning Channels on YouTube are
uploaded under YouTube's standard license policy. Nonetheless,
these videos are released by Autodesk as Creative Commons
Attribution-NonCommercial-No Derivative Works (CC BY-NC-ND)
and are marked as such.
You are free to use our video learning content according to the
Creative Commons license under which they are released.
Where can I easily download Autodesk learning videos?
Most of the Autodesk Learning Channels have an associated iTunes
podcast from where you can download the same videos and watch
them offline. When translating Autodesk learning videos, we
recommend downloading the videos from the iTunes podcasts.

Autodesk PowerMill 2019 Autodesk Legal Notice • 21

 Can I translate Autodesk learning videos?
Yes. Even though our learning videos are licensed as No Derivative
Works (ND), we grant everyone permission to translate the audio
and subtitles into other languages. In fact, if you want to recapture
the video tutorial as-is but show the user interface in another
language, you are free to do so. Be sure to give proper attribution
as indicated on the video's Creative Commons end-plate. This
special permission only applies to translation projects. Requests for
modifications outside of these license terms can be directed to
[email protected].
How do I let others know that I have translated Autodesk learning
content into another language?
Autodesk is happy to see its learning content translated into as
many different languages as possible. If you translate our videos or
any of our learning content into other languages, let us know. We
can help promote your contributions to our growing multilingual
community. In fact, we encourage you to find creative ways to
share our learning content with your friends, family, students,
colleagues, and communities around the world. Contact us at
[email protected].
I have translated Autodesk learning videos into other languages. Can I
upload them to my own YouTube channel?
Yes, please do and let us know where to find them so that we can
help promote your contributions to our growing multilingual
Autodesk community. Contact us at
[email protected].
Can I repost or republish Autodesk learning content on my site or blog?
Yes, you can make Autodesk learning material available on your site
or blog as long as you follow the terms of the Creative Commons
license under which the learning content is released. If you are
simply referencing the learning content as-is, then we recommend
that you link to it or embed it from where it is hosted by Autodesk.
That way the content will always be fresh. If you have translated or
remixed our learning content, then by all means you can host it
yourself. Let us know about it, and we can help promote your
contributions to our global learning community. Contact us at
[email protected].
Can I show Autodesk learning content during my conference?
Yes, as long as it's within the scope of a noncommercial event, and
as long as you comply with the terms of the Creative Commons
license outlined above. In particular, the videos must be shown
unedited with the exception of modifications for the purpose of
translation. If you wish to use Autodesk learning content in a
commercial context, contact us with a request for permission at
[email protected].

22 • Autodesk Legal Notice User Guide

 Can I use Autodesk learning content in my classroom?
Yes, as long as you comply with the terms of the Creative Commons
license under which the learning material is released. Many teachers
use Autodesk learning content to stimulate discussions with
students or to complement course materials, and we encourage you
to do so as well.
Can I re-edit and remix Autodesk video learning content?
No, but for one exception. Our Creative Commons BY-NC-ND license
clearly states that "derivative works" of any kind (edits, cuts,
remixes, mashups, and so on) are not allowed without explicit
permission from Autodesk. This is essential for preserving the
integrity of our instructors' ideas. However, we do give you
permission to modify our videos for the purpose of translating them
into other languages.
Can I re-edit and remix Autodesk downloadable 3D assets and footage?
Yes. The Autodesk Learning Channels on YouTube provide
downloadable 3D assets, footage, and other files for you to follow
along with the video tutorials on your own time. This downloadable
material is made available under a Creative Commons Attribution-
NonCommercial-ShareAlike (CC BY-NC-SA) license. You can
download these materials and experiment with them, but your
remixes must give us credit as the original source of the content
and be shared under the identical license terms.
Can I use content from Autodesk online help to create new materials for
a specific audience?
Yes, if you want to help a specific audience learn how to optimize
the use of their Autodesk software, there is no need to start from
scratch. You can use, remix, or enrich the relevant help content and
include it in your book, instructions, examples, or workflows you
create, then Share-Alike with the community. Always be sure to
comply with the terms of the Creative Commons license under
which the learning content is released.
What are the best practices for marking content with Creative Commons
Licenses?
When reusing a CC-licensed work (by sharing the original or a
derivative based on the original), it is important to keep intact any
copyright notice associated with the work, including the Creative
Commons license being used. Make sure you abide by the license
conditions provided by the licensor, in this case Autodesk, Inc.

Trademarks

Autodesk PowerMill 2019 Autodesk Legal Notice • 23

 The following are registered trademarks or trademarks of Autodesk,
Inc., and/or its subsidiaries and/or affiliates in the USA and other
countries: 123D, 3ds Max, Alias, ATC, AutoCAD LT, AutoCAD,
Autodesk, the Autodesk logo, Autodesk 123D, Autodesk
Homestyler, Autodesk Inventor, AutoSnap, BIM 360, Buzzsaw,
CADmep, CAMduct, Civil 3D, Configurator 360, Dancing Baby
(image), DWF, DWG, DWG (design/logo), DWG Extreme, DWG
TrueConvert, DWG TrueView, DWGX, DXF, Ember, ESTmep, FBX,
Flame, FormIt 360, Fusion 360, Glue, Heidi, Homestyler,
InfraWorks, Instructables, Instructables (stylized robot
design/logo), Inventor, Inventor HSM, Inventor LT, Maya, Maya LT,
Moldflow Plastics Advisers, Moldflow, MotionBuilder, Mudbox,
Navisworks, Opticore, P9, Pier 9, Pixlr, Pixlr-o-matic, Publisher 360,
RasterDWG, RealDWG, ReCap, ReCap 360, Remote, Revit LT, Revit,
Scaleform, Showcase, Showcase 360, SketchBook, Softimage,
Spark & Design, Spark Logo, Tinkercad, Tinkerplay, TrustedDWG,
VRED
All other brand names, product names or trademarks belong to their
respective holders.

Disclaimer
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS
MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC.
DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
REGARDING THESE MATERIALS.

Except where otherwise noted, this work is licensed

under a Creative Commons Attribution-NonCommercial-ShareAlike
3.0 Unported License. Please see the Autodesk Creative Commons
FAQ for more information.

24 • Autodesk Legal Notice User Guide