RTN Script Generato

Ensure that you enter correct data; otherwise, services may be interrupted.

[Tool Application] The tool is applicable to site deployment in typical HVPN networking (co

IGP
Loopback0 VLAN:5
IP:2.0.0.1/32 Loopback0 IP:10.0.1.2/30
IP:2.0.0.2/32

VLAN:100 VLAN:5
VLAN:100 IP:1.0.0.2/30
IP:1.0.0.1/30 IP:10.0.1.1/30
NNI NNI NNI
uni Metro
VRF L2 PIPE
VLAN:5 VLAN:5
IP:10.0.0.1/30 IP:10.0.0.2/30 NNI
SITE RTN1 VLAN:6
RTN2 IP:10.0.2.1/30

VLAN:6
IP:10.0.2.2/30
Obtain the L3 microwave HLD
template.
Obtain the IPRAN planning
information.
Obtain the wireless base station
planning information.

RTN devices go
online. DCN
Set the LLD-RouterInfo field management is
RTN Script Generator

according to IPRAN networking enabled.

Set parameters on the LLD-CSG Add boards on site or

loopback0 page according to the Web LCT.
IPRAN networking.

Configure LSRID
according to LLD-CSG
Design access-ring configuration loopback0.
(LLD-ACC IGP LINK).

Deliver offline scripts

by the NMS on a
Design LLD-RAN Data (VRF single NE basis or
inft)/LLD-CES according to wireless
base station configurations. Web LCT.

Passed the
Set LLD-L3VPN according to the acceptance test. L3
IPRAN plan. services are
successfully
deployed.

Generate the site deployment scripts

on the RTN L3 script page.
 Generator
al HVPN networking (consisting of RTN devices and routers). The deployment process is as follows:

Loopback0
VLAN:5 IP:3.0.0.1/32
IP:10.0.1.2/30 100.0.0.2/29
NNI uni
VRF
NNI 100.0.0.1/29
VLAN:5 ROUTER1
IP:10.0.3.1/30

VLAN:5
IP:10.0.3.2/30 NNI SERVER

NNI VRF uni

VLAN:6 100.0.0.3/29
IP:10.0.2.2/30 ROUTER2
Loopback0
IP:3.0.0.2/32

RTN devices go
online. DCN
management is
enabled.

Add boards on site or

he Web LCT.

Configure LSRID
according to LLD-CSG
oopback0.

Deliver offline scripts

by the NMS on a
single NE basis or
Web LCT.

Passed the
acceptance test. L3
services are
successfully
deployed.
e deployment process is as follows:

[Sheet Description]
sheet Description
Indicates the data summary sheet. After design of other sheets is complete, click Check
RTN L3 script Data. The configuration plan is displayed. Click Generate Command to generate site
deployment scripts.
LLD-RouterInfo Enters ASG and RR information of the IPRAN obtained from the datacom side.
Enters the NE IP of the CSG RTN on the access ring and the ASG that corresponds to
LLD-CSG loopback0
thelink
Enters the IGP topology, IP parameters, CSG.
type, and VLAN information of the CSG
LLD-ACC IGP LINK
RTN node on the accessand
Obtains wireless base station planning information ring.
designs connections between
LLD-RAN Data(VRF inf)
CSGs and the wireless side.
Obtain planning information of 2G base stations and designs connections between
LLD-CES
CSGs and the wireless side.
LLD-L3VPN Enters the VPN information obtained from the wireless side.
LLD-common&item cfg
Click APPLY.

[Page Description]
Table Header Color Meaning
Mandatory field
Optional field
 Displayed or Not (Y/N)
s is complete, click Check
ommand to generate site Y

rom the datacom side. Y

ASG that corresponds to
Y
N information of the CSG
Y
gns connections between
Y
ns connections between
N
wireless side. N
N
 745460592.xls 文档密级

NE name login name login password

ED2020 root Changeme_123

Index IP Block(/28) NE IP Address(/32)

1 10.72.70.131

Index IP Block(/27) NE IP Address(/30)

1

Index VPNName RD
1 Abis 65500:110
2 IU-B 65500:100
3 S1 65500:140
4 OAM 65500:800
5 glo_OAM 65500:810

NEname
Index Wireless Site ID
(Connect to BBU)
2 ED2020
3 ED2020
4 ED2020
5 ED2020

NEname
Index Site ID (Connect to
BBU)

04/16/2024 华为保密信息,未经授权禁止扩散 第7页，共93页

 745460592.xls 文档密级

Index NEname Loopback 0(LSR ID)

1 T3246_Evebareke Market _ATN980B_1 10.22.29.120

04/16/2024 华为保密信息,未经授权禁止扩散 第8页，共93页

 745460592.xls 文档密级

Region Sub Region Wireless Site ID

Sub Region Link Type

NEname
IGP Link ED2020

import RT export RT Description

65500:110, 65500:800 65500:110 2G service
65500:100, 65500:800 65500:100 3G service
65500:140 65500:140 LTE service
65500:800,65500:100,655065500:800 LTE OAM
65500:810 65500:810 serviceOAM

Device Type VPN Name Port

RTN980N Abis 17/255/3

RTN980N IU-B 17/255/4
RTN980N S1 17/255/4
RTN980N OAM 17/255/4

BoardType CESType Port

04/16/2024 华为保密信息,未经授权禁止扩散 第9页，共93页

 745460592.xls 文档密级

Region Sub Region Site ID

LGS LGS T0100

04/16/2024 华为保密信息,未经授权禁止扩散 第10页，共93页

 745460592.xls 文档密级

Logical Homing ASG sites

NE name NE Type NE Version
ASG1

ED2020 T3246_Evebareke Market _ATN980B_1

EP1 EP2
Port ID IP Address(/30) NEname Port ID
1/255/1 10.71.25.193 T3246 5/255/1

CoS QoS Type Deploy Device Domain

VLAN Wireless IP1/30 NE IP1/30 Logic IP/32

3800 10.29.0.61 10.29.0.62

2000 10.29.42.61 10.29.42.62
3600 10.29.51.61 10.29.51.62
3700 10.121.129.221 10.121.129.222

VC12 Path ID Service

timeslot Frame type Name

04/16/2024 华为保密信息,未经授权禁止扩散 第11页，共93页

 745460592.xls 文档密级

NE Type Role Version Refer 1

NE40E-X8 ASG V800R008C10SPC300

04/16/2024 华为保密信息,未经授权禁止扩散 第12页，共93页

 745460592.xls 文档密级

Logical Homing ASG sites Homing RR IGP

ASG2 ASG3 RR1 RR2 AREA PROCESS

Market _ATN980B_1 49 1000

Port TypeSubif-VLAN
IP Address (/30)
10.71.25.194 MW 100

DHCP Server IP Remark

ABIS
IUB
S1
OAM

04/16/2024 华为保密信息,未经授权禁止扩散 第13页，共93页

 745460592.xls 文档密级

Refer 2 Refer 3 Remark

04/16/2024 华为保密信息,未经授权禁止扩散 第14页，共93页

 745460592.xls 文档密级

04/16/2024 华为保密信息,未经授权禁止扩散 第15页，共93页

 745460592.xls 文档密级

04/16/2024 华为保密信息,未经授权禁止扩散 第16页，共93页

Index NEname Loopback 0(LSR ID) Region Sub Region
1 T3246_Evebareke Market _ATN980B_1 10.22.29.120 LGS LGS
Site ID NE Type Role Version Refer 1 Refer 2 Refer 3 Remark
T0100 NE40E-X8 ASG V800R008C10SPC300
 745460592.xls 文档密级

Index IP Block(/28) NE IP Address(/32) Region Sub Region Wireless Site ID

1 10.72.70.131

04/16/2024 华为机密，未经许可不得扩散 第19页，共93页

 745460592.xls 文档密级

Logical Homing ASG sites

NE name NE Type NE Version
ASG1 ASG2

ED2020 T3246_Evebareke Market _ATN980B_1

04/16/2024 华为机密，未经许可不得扩散 第20页，共93页

 745460592.xls 文档密级

sites Homing RR IGP

ASG3 RR1 RR2 AREA PROCESS

49 1000

04/16/2024 华为机密，未经许可不得扩散 第21页，共93页

Index IP Block(/27) NE IP Address(/30) Sub Region Link Type
NEname
1 IGP Link ED2020
 EP1 EP2
Port Type
Port ID IP Address(/30) NEname Port ID IP Address (/30)
1/255/1 10.71.25.193 T3246 5/255/1 10.71.25.194 MW
Subif-VLAN

100
 Wireless Site NEname
Index Device Type VPN Name
ID (Connect to BBU)
2 ED2020 RTN980N Abis
3 ED2020 RTN980N IU-B
4 ED2020 RTN980N S1
5 ED2020 RTN980N OAM
glo_OAM
 DHCP
Port VLAN Wireless IP1/30 NE IP1/30 Logic IP/32
Server IP
17/255/3 3800 10.29.0.61 10.29.0.62
17/255/4 2000 10.29.42.61 10.29.42.62
17/255/4 3600 10.29.51.61 10.29.51.62
17/255/4 3700 10.121.129.221 10.121.129.222
 Remark

ABIS
IUB
S1
OAM
 745460592.xls 文档密级

Index VPNName RD import RT export RT

1 Abis 65500:110 65500:110, 655065500:110
2 IU-B 65500:100 65500:100, 655065500:100
3 S1 65500:140 65500:140 65500:140
4 OAM 65500:800 65500:800,6550 65500:800
5 glo_OAM 65500:810 65500:810 65500:810

04/16/2024 华为机密，未经许可不得扩散 第28页，共93页

 745460592.xls 文档密级

Description CoS QoS Type Deploy Device Domain

2G service
3G service
LTE service
LTE OAM
serviceOAM

04/16/2024 华为机密，未经许可不得扩散 第29页，共93页

 Function Parameters

PORT

Setting maximum frame length for Port L2

Setting maximum frame length for Port L3

Setting the LSR ID or the LoopBack0 IP

BFD

BFD Common
Enabling BFD globally
IGP

ISIS Instance Enabling an IS-IS instance

Setting static routes to be imported to IS-IS

Setting direct routes to be imported to IS-IS

Setting the IS-IS cost-style

Enabling IS-IS TE

Setting the level of an IS-IS device

Enabling IS-IS to automatically calculate the link

cost of interfaces

Setting the ISIS bandwidth reference value

Setting the IS-IS originated LSP packet length

Setting the IS-IS received LSP packet length

 Setting the delay in generating an ISIS LSP

Enabling the ISIS LSP fast flooding feature

Setting the interval for SPF calculation

Port

Setting the link cost for an IS-IS interface

Setting the link type for an ISIS interface

Setting the P2P network type for an ISIS interface

Setting the IS-IS interface authentication

Setting transmission of small-sized Hello packets

for an IS-IS interface

Setting the interval for an ISIS interface to send

Hello packets
 Setting the IS-IS holdtime to be a multiple of the
interval for sending Hello packets

BFD

Enabling global IS-IS BFD feature

Setting the values of global IS-IS BFD session

parameters

OSPF Instance
Enabling an OSPF process

Setting the OSPF bandwidth reference value

Setting the interval for calculating OSPF routes

Setting the interval for updating OSPF LSAs

Setting the interval for receiving OSPF LSAs

Creating an OSPF area

Setting an OSPF area to the stub area

Setting static routes to be imported to OSPF

 Setting direct routes to be imported to OSPF

Setting static routes to be imported to OSPF

(Extending)

Setting direct routes to be imported to OSPF

(Extending)
Enabling the Opaque LSA capability in an OSPF
process

Enabling the MPLS TE feature in an OSPF area

Setting the OSPF GR helper mode

Port

Setting the cost of an OSPF interface

Setting OSPF interface authentication information

 Setting the interval for the OSPF interface to send
hello packets

Setting the the neighbor dead interval of an OSPF

interface

Setting the network type for the OSPF interface

BFD

Enabling global OSPF BFD feature

Setting the values of global OSPF BFD session

parameters
BGP Enabling BGP
 Setting direct routes to be imported to BGP

Setting static routes to be imported to BGP

Configuring the MD5 authentication for BGP peers

Enabling GR for BGP

Configuring the parameter for BGP GR

Configuring the ConnectRetry interval for BGP

peer

TUNNEL
RSVP

Creating a dynamic RSVP tunnel

Enabling rerouting protection for a dynamic

tunnel

Setting the backup type for an RSVP tunnel

Setting the active/backup switching reversion

mode for an RSVP tunnel

Setting the active/backup switching reversion

WTR for an RSVP tunnel

Adding a route restriction node for a dynamic

tunnel(primary)

Adding a route restriction node for the backup

LSP of an RSVP tunnel(backup)

Enabling the auto re-optimization for a dynamic

tunnel

Setting the period of the auto re-optimization

function

Setting the dynamic tunnel TTL mode

Setting parameters for the RSVP status timer on a
port

Setting the parameters for RSVP retransmission on

a port

Setting the parameters for transmitting RSVP Hello

packets on a port

Setting RSVP authentication information on a port

Setting the RSVP GR enable status

 Setting RSVP reconnection time and recovery time

Setting RSVP summary refresh (Srefresh) on a port

LDP Common

Enabling LDP for an interface

Enabling the LDP GR helper

Configuring the LDP reconnection timer

Configuring the LDP recovery timer

Configuring the LDP neighbor-liveness timer

LSP

Setting the interval during which an LSP is being

set up after an LDP session is created

Configuring the LDP graceful deletion function

 Configuring the delay before canceling the
upstream label once the LDP session is down
PW Enabling LDP PW

Business PW P

Adding a dynamic LDP PW

Enabling CES
Setting the enable status of CES RTP header
encapsulation
Setting CES jitter buffer time
Setting the CES packet load time
Setting CES emulation parameters
Setting the thresholds for R bit insertion
Setting the CES sequence number mode
Enabling the processing of CES L, M, and R bits

Configuring the LDP PW MD5 authentication

password

Setting the IP address to a remote LDP peer

Creating the remote peer and enabling PWE3

POLICY

Tunnel Policy

Creating a tunnel policy

L3VPN

VRF

Setting the maximum number of VRF prefixes

 Enabling the VPN FRR feature for an L3VPN
instance
CES

PW Redundancy Protection

Creating a PW redundancy group

Setting the enable status of the dual-feeding

function for the active and standby PWs of a PW
redundancy group

Setting the mode of a PW redundancy group

Setting the switchback policy of a PW redundancy

group
Business Configuration

Creating a CES service

Setting the CES service priority

Setting the overhead bytes to be transparently

transmitted

Setting a CES transmit E1 clock

DHCP

Adding a server for the DHCP relay

Other-COMMON

Syslog, NTP, AAA, radius, SNMP, ACL, and other public configuration, directly write the command line in this blank box (exa
Syslog, NTP, AAA, radius, SNMP, ACL, and other public configuration, directly write the command line in this blank box (exa
 Parameter 1 Parameter 2 Parameter 3 Parameter 4

65535,255,0x2801 9500

65535,255,0x2801 9400
wide

level-2

level-2

enable

100

1497

1497
 level-2 50 50 1

level-2 5 10

50 50 1

10000 1000 100

65535,255,0x2801 level-2
65535,255,0x2801

65535,255,0x2801 none md5 huawei

65535,255,0x2801

65535,255,0x2801 10 none
65535,255,0x2801 3 none

enable

10 10 3

100
500 1000 1000

500 1000 5000

500 500 1000

49

1 disable
 2

0.0.0.0

enable

1000 100 10

65535,255,0x2803 md5 password 128

65535,255,0x2803 10

65535,255,0x2803 40

65535,255,0x2803 broadcast

enable

10 10 3

64902
10.22.29.120 cipher huawei

enable

600

10.22.29.120 150
100 enable

100 hotstandby

100 revertive

100 10

100 enable

100 3600

pipe
65535,255,0x2801 30000 10

65535,255,0x2801 500 100

65535,255,0x2801 3 3

65535,255,0x2801 none password

disable
 3600 1800

65535,255,0x2801 enable

65535,255,0x2801

300

300

600

10

enable
 5

104 1.1.61.62 101 satop-e1

104 disable

104 8000
104 1000
104 e1 32
104 100 5
104 hwmode
104 disable

10.22.29.120 cipher password

10.22.29.120 1001

10.22.29.120 1001

glo_OAM IPRAN cr-lsp lsp

glo_OAM 2000 100

glo_OAM

102 103 104 1to1

102 enable

102 master

102 immediately 65535

 p2p

102 ef

102 2 E1&D1

102 17 0

65535,255,0x2803 60

mand line in this blank box (example: ip-isis-create: 1;)

mand line in this blank box (example: ip-isis-create: 1;)
 Blocksign (parameter 1 winning
the blue indicates that the value
is obtained from another sheet
page, the value in the cell is not
Replacerule (Use
marked, and xxx_begin/xxx_end
substitution rules to
marks the area of a configured
Remark generate
block; The command for the
commands, improve
port_level tag is the port level
efficiency)
and the other is the network
meta level ; The configuration
entry in this page is displayed in
the item cfg.)

Parameter1(L2 MTU):64～9600 value1,value2

port_begin
Parameter1(L3 MTU):46～9600 value1,value2
port_end

(It is not generated on the

Parameter:neid current page)

bdf_begin

isis_begin
Parameter1:wide,compatible,wide-compatible value

Parameter1:level-1,level-2,level-1-2 value

Parameter1:level-1,level-2,level-1-2 value

Parameter1:enable,disable value

Parameter1(bandwidth):1～2147483648 value

Parameter1(maxValue):512～16384 value

Parameter1(maxValue):512～16384 value
Parameter1(init-interval):1～
60000(ms);Parameter2(incr-interval):1～ value1,value2,value3,val
60000(ms);Parameter3(max-interval):1～ ue4
120(s)

Parameter1(level_type):level-1,level-
2;Parameter2(lsp_count):1～
value1,value2,value3
15;Parameter3(max_timer_interval):10～
50000(ms)

Parameter1(init-interval):1～
60000(ms);Parameter2(incr-interval):1～ value1,value2,value3
60000(ms);Parameter3(max-interval):1～
120(s)

Parameter1(MW):1-
16777215;Parameter2(GE):1- (It is not generated on the
16777215;Parameter三(10GE):1-16777215 current page)

Parameter1:port;Parameter2:level-1,level-
port_level value1,value2
2,level-1-2
Parameter1:broadcast,p2p port_level value

Parameter1:port;Parameter2:level-1,level-
2,none(only for value1,value2,value3,val
port_level
p2p);Parameter3:simple,md5;Parameter4(pass ue4
word)

Parameter1:port; port_level value

Parameter1:port;Parameter2:3～
255(s);Parameter3:level-1,level-2,none(only port_level value1,value2,value3
for p2p)
Parameter1:port;Parameter2(holdmultivalue):
3～1000;Parameter3:level-1,level-2,none(only port_level value1,value2,value3
for p2p)

Parameter1:disable,enable value

Parameter1(min-rx-interval):
3~1000(ms);Parameter2(min-tx-interval):
isis_end value1,value2,value3
3~1000(ms);Parameter3(detect-multiplier):
3~50

ospf_begin

Parameter1(bandwidth):1～2147483648 value
Parameter1(start-interval):1～
1000(ms);Parameter2(hold-interval):1～ value1,value2,value3
5000(ms);Parameter3(max-interval):1～
20000(ms)

Parameter1(start-interval):1～
1000(ms);Parameter2(hold-interval):1～ value1,value2,value3
5000(ms);Parameter3(max-interval):1～
10000(ms)

Parameter1(start-interval):1～
1000(ms);Parameter2(hold-interval):1～ value1,value2,value3
5000(ms);Parameter3(max-interval):1～
10000(ms)

value

Parameter1:disable,enable value1,value2
Parameter1(type):1,2 value

Parameter1(type):1,2 value

value

Parameter1:disable,enable value

Parameter1(MW);Parameter2(GE);Parameter (It is not generated on the

三(10GE) current page)

Parameter1:port;
Parameter1:认证模式simple/md5/hmac-
md5/hmac-sha256;
value1,value2,value3,val
Parameter2(password); port_level
ue4
Parameter3:认证密码标识:整数形式 for
simple 0,for md5/hmac-md5/hmac-sha256
1~255
Parameter1:port;Parameter1:1~65535(s) port_level value1,value2

Parameter1:port;Parameter1:1~235926000(s) port_level value1,value2

Parameter1:port;Parameter1:broadcast,p2p port_level value1,value2

Parameter1:port;Parameter1:disable,enable value

Parameter1(min-rx-interval):
3~1000(ms);Parameter2(min-tx-interval):
ospf_end value1,value2,value3
3~1000(ms);Parameter3(detect-multiplier):
3~50

Parameter1:AS Number
 bgp_begin

(It is not generated on the

current page)

Parameter1:cipher,simple;Parameter2(passwor
port_level value1,value2,value3
d)

Parameter1:disable,enable value

Parameter1:3～3000(s) value

Parameter1:1～65535(s) port_level value1,value2

bgp_end
 rsvp_begin

Parameter1:enable,disable tnl_index value1,value2

Parameter1:hotstandby,none tnl_index value1,value2

Parameter1:revertive,non-revertive tnl_index value1,value2

Parameter1:0～60(s) tnl_index value1,value2

Temporarily not generated

Parameter1:disable,enable tnl_index value1,value2

Parameter1:5~604800(s) tnl_index value1,value2

Parameter1:pipe, uniform value

Parameter1:5000 ~
port_level value1,value2,value3
2147483647(ms);Parameter2:3 ~ 255

Parameter1:500 ~ 3000(ms);Parameter2:0～ port_level value1,value2,value3

100

Parameter1:1 ~ 60(s);Parameter2:3～255 port_level value1,value2,value3

Parameter1:none,md5;Parameter2(password)
port_level value1,value2,value3
(Parameter2为md5)

Parameter1:disable,enable value
Parameter1:90 ~ 259200(s);Parameter2:60 ~
value1,value2
259200(s)

Parameter1:disable,enable rsvp_end,port_level value1,value2

ldp_begin,port_level value

Parameter1:3～3600(s) value

Parameter1:3～3600(s) value

Parameter1:3～3600(s) value

Parameter1:0～65535(s) value

Parameter1:disable,enable value
Parameter1:1~65535(s) value

ldp_end

Parameter1:satop-e1(适配LLD-CES页面I列为
unframe的非成帧低速业务),cesopsn-bas(适配 value1,value2,value3,val
ces_begin,port_level
LLD-CES页面I列为crc4-multiframe或double- ue4
frame的成帧低速业务)

Parameter1:enablehwrtp,enablestdrtp,disable port_level value1,value2

Parameter1:375~16000(us) port_level value1,value2

Parameter1:125~5000(us) port_level value1,value2
Parameter1:e1;Parameter2:1 ~ 32 port_level value1,value2,value3
Parameter1:1~65535;Parameter2:1~65535 port_level value1,value2,value3
Parameter1:stdmode,hwmode port_level value1,value2
Parameter1:disable,enable port_level,ces_end value1,value2
Parameter1:peer
lld_pw_md5_begin
address;Parameter2:cipher,plain;Parameter3(p value1,value2,value3
lld_pw_md5_end
assword)
Parameter1:peer address;Parameter2:remote
remote_peer_begin,port_level value1,value2
peer name
Parameter1:peer address;Parameter2:remote
port_level,remote_peer_end value1,value2
peer name

Parameter1(policyname);Parameter2:cr- value1,value2,value3,val
policy_begin
lsp,lsp;Parameter3:lsp,cr-lsp ue4

Parameter1:1～
4294967295(vrfRouteNum);Parameter2:1～ vpn_begin value1,value2,value3
100(alertPercent)
 vpn_end value

ces_begin

Parameter1:1to1 ; Parameter2:工作pw索 value1,value2,value3,val

pw_redn_begin,port_level
引;Parameter3:保护pw索引 ue4

Parameter1:disable,enable port_level value1,value2

Parameter1:master, independent port_level value1,value2

Parameter1:delay, immediately,
port_level,pw_redn_end value1,value2,value3
never;Parameter2:10~600(s)和invalid 65535
Parameter1:p2p,soh (Configuration is not configured, in CES) value

Parameter1:be,af1,af2,af3,af4,ef,cs6,cs7 ces_cfg_begin,port_level value1,value2

Parameter1:0 ~
32;Parameter2:E1(0),F1(1),D1(2),D2(3),D3(4),X
1(5),X2(6),K1(7),K2(8),D4(9),X4(10),
port_level,ces_cfg_end value1,value2,value3
D5(11),D6(12),D7(13),D8(14),D9(15),D10(16),D
11(17),D12(18),X3(19),E2(20),null(0xff)

Parameter1:1～12(0 means not use e1 clock) value1,value2,value3

Parameter1:0~254 Parameter2:option
DHCP
string(Parameter1为60)
Command

:ptn-l2port-set-portmtu:value1,value2;

:ptn-l3port-set-mtu:value1,value2;

:bfd-enable;

isis 1

:ip-isis-add-import-route:isisprocess,direct,ipv4;

:ip-isis-add-import-route:isisprocess,static,ipv4;
:ip-isis-set-cost-style:isisprocess,value;

:ip-isis-set-traffic-eng:isisprocess,value;

:ip-isis-set-is-level:isisprocess,value;

:ip-isis-set-auto-cost:isisprocess,value;

:ip-isis-set-bandwidth-reference:isisprocess,value;

:ip-isis-set-lsp-length:isisprocess,originate,value;

:ip-isis-set-lsp-length:isisprocess,receive,value;
:ip-isis-set-lsp-generation:isisprocess,value1,value2,value3,value4;

:ip-isis-set-flash-flood:isisprocess,value1,value2,value3;

:ip-isis-set-spf-timer:isisprocess,value1,value2,value3;

:ip-isis-set-link-level:value1,value2;
:ip-isis-set-if-p2pstate:value,enable;

:ip-isis-set-if-autheninfo:value1,value2,ip,value3,"value4";

:ip-isis-set-small-hello:value;

:ip-isis-set-timer-hello:value1,value2,value3;
:ip-isis-set-timer-holding-multi:value1,value2,value3;

:ip-isis-set-bfd:isisprocess,value;

:ip-isis-set-bfd-para:isisprocess,value1,value2,value3;

:ip-ospf-set-bandwidth-reference:ospfprocess,value;
:ip-ospf-set-spf-timer:ospfprocess,value1,value2,value3;

:ip-ospf-set-lsa-originate-timer:ospfprocess,value1,value2,value3;

:ip-ospf-set-lsa-arrival-timer:ospfprocess,value1,value2,value3;

:ip-ospf-add-areaid:ospfprocess,value;

:ip-ospf-set-stub:ospfprocess,value1,value2;

:ip-ospf-add-import-route:ospfprocess,static;
:ip-ospf-add-import-route:ospfprocess,direct;

:ip-ospf-add-import-route-ext:ospfprocess,static,value;

:ip-ospf-add-import-route-ext:ospfprocess,direct,value;

:ip-ospf-set-opaque-capability:ospfprocess,enable;

:ip-ospf-set-mpls-te:ospfprocess,value,enable;

:ip-ospf-set-graceful-restart:ospfprocess,value;

:ip-ospf-set-if-autheninfo-ext:value1,value2,"value3",value4;
:ip-ospf-set-timer-hello:value1,value2;

:ip-ospf-set-timer-dead:value1,value2;

:ip-ospf-set-network-type:value1,value2;

:ip-ospf-set-bfd:ospfprocess,value;

:ip-ospf-set-bfd-para:ospfprocess,value1,value2,value3;
:ip-bgp-set-peer-password:"_public_",value1,value2,"value3";

:ip-bgp-set-gr-enable:value;

:ip-bgp-set-grhelper-timer:value;

:ip-bgp-set-peer-connretry-time:value1,"_public_",value2;
:mpls-tnl-set-rrenable:value1,value2;

:mpls-tnl-set-backuptype:value1,value2;

:mpls-tnl-set-rvtmode:value1,value2;

:mpls-tnl-set-rvtwtr:value1,value2;

:mpls-tnl-set-autoopten:value1,value2;

:mpls-tnl-set-autooptperiod:value1,value2;

:mpls-tnl-set-ttl-mode:value;
:mpls-rsvp-set-statetimer:value1,value2,value3;

:mpls-rsvp-set-retranspara:value1,value2,value3;

:mpls-rsvp-set-hellopara:value1,value2,value3;

:mpls-rsvp-set-authinfo:value1,value2,"value3";

:mpls-rsvp-set-gr:value;
:mpls-rsvp-set-grtime:value1,value2;

:mpls-rsvp-set-srefresh:value1,value2;

:mpls-ldp-set-enable:value;

:mpls-ldp-enable-gr;

:mpls-ldp-set-reconnecttime:value;

:mpls-ldp-set-recovrytime:value;

:mpls-ldp-set-nbrlivetime:value;

:mpls-ldp-set-timer-delay:value;

:mpls-ldp-set-graceful-delete:value;
:mpls-ldp-set-graceful-del-timer:value;

:mpls-pw-add-dynldppw:value1,value4,value1,bidir,null,value2,1,value3;

:mpls-pw-set-cesrtpen:value1,value2;

:mpls-pw-set-cesjitter:value1,value2;
:mpls-pw-set-cesloadtime:value1,value2;
:mpls-pw-set-cesemul:value1,value2,value3;
:mpls-pw-set-cesrbitthrs:value1,value2,value3;
:mpls-pw-set-cessnmode:value1,value2;
:ethn-cfg-set-ceslmren:value1,value2;

:mpls-ldp-set-md5password:value1,value2,"value3";

:mpls-ldp-set-remote-ip:"value2",value1;

:mpls-ldp-enable-remote-ip-pwe3:"value2",value1;

:l3vpn-add-tnl-policy:"value2";:l3vpn-set-tnl-policy-auto-sel:"value2",value3,value4;:l3vpn-
set-vrf-bind-tnl-policy:"value1",ipv4uni,"value2";

:l3vpn-set-vrf-prefix-limit:"value1",ipv4uni,value2,value3,active;
:l3vpn-set-vrf-vpnfrr-enable:"value",ipv4;

:mpls-pw-add-redundancy:value1,value4,value2,value3;

:mpls-pw-set-redundancy-dualrecv:value1,value2;

:mpls-pw-set-redundancy-mode:value1,value2;

:mpls-pw-set-redundancy-reroute:value1,value2,value3;
:ethn-cfg-set-cessrvpri:value1,1,value2;

:ethn-cfg-set-cespoh:value1,value2,value3;

:ethn-cfg-set-cese1clk:value1,value2,value3;

:ip-dhcp-relay-add-server:value1,Serverip,value2,"value3";