Scribd
Upload
6 views

Structural Analysis Tutorial 2

The document provides 10 structural analysis questions and diagrams related to influence line diagrams and determining maximum shear and bending moment. Questions involve using Muller-Breslau principle to draw qualitative influence line diagrams and finding maximum shear and moment as loads move over simply supported and continuous beams and trusses.

Uploaded by

Daksh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
6 views

Structural Analysis Tutorial 2

The document provides 10 structural analysis questions and diagrams related to influence line diagrams and determining maximum shear and bending moment. Questions involve using Muller-Breslau principle to draw qualitative influence line diagrams and finding maximum shear and moment as loads move over simply supported and continuous beams and trusses.

Uploaded by

Daksh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Tutorial-2

Structural Analysis (CE21004)


Department of Civil Engineering,
Indian Institute of Technology Kharagpur
Due Date: 29/01/2019

January 22, 2019

Question 1: Use Müller-Breslau principle to draw the qualitative influence


line diagram for shear and moment at the midpoint of D and E.

Figure 1: Structure for Question 1.

Question 2: Draw the influence line diagrams for the vertical support
reactions at B, C and for the internal moment at D.

Figure 2: Structure for Question 2.

Question 3: Draw the influence line diagrams for the member F E as the
load moves over the bottom cord.

1
Figure 3: Structure for Question 3.

Question 4: Consider a simply supported beam of length L. A chain of


three equidistant loads, each having a magnitude of P and separated by a
distance a < L/3, moves from left to right. Find the maximum shear and
bending moment at the mid span.
Question 5: The shown influence line diagram is for which member of the
truss?

Figure 4: Structure for Question 4.

Question 6: Draw the influence line diagrams for the vertical support
reaction at C and for the internal moment at D when unit load moves over
(a) beam BC (b) inclined column AB. Assume point of application of load
is always at right angle with the member.

2
Figure 5: Structure for Question 6.

Question 7: Use Müller-Breslau principle to draw the qualitative influence


line diagram for reactions Ax , Ay ; shear VE and moment MF . If unit load
moves over (a) column AB (b) column GC.

Figure 6: Structure for Question 7.

Question 8: A Girder, floor beams and stringer system show in figure


7. Stringer is loaded with uniformly distributed load. Draw influence line
diagram for (a) Ay (b) shear Vc and Vd (c) moment at Me

3
Figure 7: Structure for Question 8.

Question 9: Find out maximum moment and shear at point C for the train
of loads (in figure 8) as it moves from right to left.

Figure 8: Structure for Question 9.

Question 10: Find out maximum moment and shear at point C for the
udl (in figure 9) as it moves from left to right.

4
Figure 9: Structure for Question 10.

You might also like