Scribd
Upload
276 views2 pages

OSL Plasma Tutorial

This tutorial shows how to paint an orange OSL (object source lighting) effect on a plasma gun using fluorescent paints and inks. It provides step-by-step instructions for applying different fluorescent colors and mixtures to achieve the lighting effect emanating from the plasma gun.

Uploaded by

Henrik Granlid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
276 views2 pages

OSL Plasma Tutorial

This tutorial shows how to paint an orange OSL (object source lighting) effect on a plasma gun using fluorescent paints and inks. It provides step-by-step instructions for applying different fluorescent colors and mixtures to achieve the lighting effect emanating from the plasma gun.

Uploaded by

Henrik Granlid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Tutorial

Orange OSL effect


on plasma gun
This tutorial shows how to paint a plasma gun with an orange OSL effect,
using Vallejo’s fluorescent colors and inks. A Space Wolves Primaris Hellblaster
has been used for the example.

By Jon Gómez (Pintureando.com)

1 The metallic parts of the weapon have been painted 2 All the corners and edges of the weapon are 3 2-3 thin coats of Model Color White 70.951 are applied
beforehand. The rest of the weapon is painted using highlighted using Model Color White 70.951. over the core of the plasma weapon. This will be the
Model Color Black 70.950, and then outlined with base for the lighting effect.
Model Color Neutral Grey 70.992.

4 In the following steps, we use the airbrush to achieve 5 Game Ink Yellow 72.085 is applied over the areas that 6 A mixture of Game Ink Yellow 72.085 and a pinch of
the OSL effect. Game Air Dead White 72.701 is applied were previously painted white. Game Ink Red 72.086 is made to obtain an orange
around the plasma core. We want to achieve a very ink. It is applied around the plasma core to achieve an
fine gradient, so it has been diluted at a ratio of 3 drops orange hue.
of Dead White, to 4 of Airbrush Thinner 71.261 and 1 of
Flow Improver 71.262.

www.acrylicosvallejo.com
Tutorial

Orange OSL effect on plasma gun

7 Using a brush, diluted Model Color White 70.951 is 8 Model Color Fluorescent Yellow 70.730 mixed with a 9 On top of the plasma core, Model Color Fluorescent
applied to the lower part of the plasma core so that it little Game Color Moon Yellow 72.005 is used on the Orange 70.733 mixed with a pinch of Game Color
remains in the nooks and crannies. We also apply this lower part of the core. Moon Yellow 72.005 is applied to increase the
white on some of the edges of the armor where the intensity. This mixture is also applied to the parts of
OSL reflects. the armor where the white was applied in the previous
step.

10 Using very diluted Model Color White 70.951, a fine


line is applied very carefully on the lower part of the
plasma core.
11 Finally, we paint the rest of
the details of the miniature
and it is then complete.

www.acrylicosvallejo.com

You might also like