/* USER CODE BEGIN Header */

/**
******************************************************************************
* @file : main.c
* @brief : Main program body
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#define RS_PORT GPIOB
#define RS GPIO_PIN_10
#define EN_PORT GPIOB
#define EN GPIO_PIN_11

void lcd_cmd(int cmd)

{
HAL_GPIO_WritePin(GPIOB, RS,0);
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0 , (cmd&0x01));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_1 , (cmd&0x02));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2 , (cmd&0x04));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_3 , (cmd&0x08));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_4 , (cmd&0x10));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_5 , (cmd&0x20));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_6 , (cmd&0x40));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_7 , (cmd&0x80));

HAL_GPIO_WritePin(GPIOB, EN,1 );
HAL_Delay(10);
HAL_GPIO_WritePin(GPIOB, EN,0 );

}
void lcd_data(int data)
{
HAL_GPIO_WritePin(GPIOB, RS,1);
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0 , (data&0x01));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_1 , (data&0x02));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2 , (data&0x04));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_3 , (data&0x08));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_4 , (data&0x10));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_5 , (data&0x20));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_6 , (data&0x40));
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_7 , (data&0x80));

HAL_GPIO_WritePin(GPIOB, EN,1 );
HAL_Delay(10);
HAL_GPIO_WritePin(GPIOB, EN,0 );
}
void lcd_string(char *s){

while(*s!='\0'){

lcd_data(*s++);
}
}

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/

/* USER CODE BEGIN PD */
/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/

/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/

void SystemClock_Config(void);
static void MX_GPIO_Init(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/**
* @brief The application entry point.
* @retval int
*/
int main(void)
{
/* USER CODE BEGIN 1 */
HAL_Init();
SystemClock_Config();
MX_GPIO_Init();

lcd_cmd(0x38);
lcd_cmd(0x01);
lcd_cmd(0x0F);
lcd_cmd(0x80);
lcd_string("JAY SHREE RAM");

/* USER CODE END 1 */

/* MCU Configuration--------------------------------------------------------*/
 /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();

/* USER CODE BEGIN Init */

/* USER CODE END Init */

/* Configure the system clock */

SystemClock_Config();

/* USER CODE BEGIN SysInit */

/* USER CODE END SysInit */

/* Initialize all configured peripherals */

MX_GPIO_Init();
/* USER CODE BEGIN 2 */

/* USER CODE END 2 */

/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
/* USER CODE END WHILE */

/* USER CODE BEGIN 3 */

}
/* USER CODE END 3 */
}

/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

/** Initializes the RCC Oscillators according to the specified parameters

* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}

/** Initializes the CPU, AHB and APB buses clocks

*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
 RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)

{
Error_Handler();
}
}

/**
* @brief GPIO Initialization Function
* @param None
* @retval None
*/
static void MX_GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};

/* GPIO Ports Clock Enable */

__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();

/*Configure GPIO pin Output Level */

HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7,
GPIO_PIN_RESET);

/*Configure GPIO pin Output Level */

HAL_GPIO_WritePin(GPIOB, GPIO_PIN_10|GPIO_PIN_11, GPIO_PIN_RESET);

/*Configure GPIO pins : PA0 PA1 PA2 PA3

PA4 PA5 PA6 PA7 */
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

/*Configure GPIO pins : PB10 PB11 */

GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
 /* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1)
{
}
/* USER CODE END Error_Handler_Debug */
}

#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */