Scribd
Upload
43 views13 pages

10.15-LifeSmart General Controller

The document provides information about the LifeSmart General Controller device, including what it is, its input/output definition, different working modes like free mode, controlling DC motors and curtains, and app settings like setting the working mode and delay times. The general controller allows conventional appliances to be made smart by connecting sensors, motors and switches to achieve remote control and other functions.

Uploaded by

luiscarlos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views13 pages

10.15-LifeSmart General Controller

The document provides information about the LifeSmart General Controller device, including what it is, its input/output definition, different working modes like free mode, controlling DC motors and curtains, and app settings like setting the working mode and delay times. The general controller allows conventional appliances to be made smart by connecting sensors, motors and switches to achieve remote control and other functions.

Uploaded by

luiscarlos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

General Controller

Scott，2020.10
Contents
In this course, you will learn,

- What is general controller

- I/O definition

- Working mode and use cases

- App settings
What is general controller

LifeSmart General Controller is a professional engineer


device. It provides dry contact input and output, makes
conventional appliance smart. By connecting to general
controller, sensors, motors and switches can be integrated
to LifeSmart system, to achieve remote control, timed
control, trigger and scene mode and etc..

Sensor DC Motor Curtain Motor Contactor


I/O Definition
• One pairing button, one indication light

• 5.5 mm * 2.5 mm 12/24 DC power in


(connected to DC+, GND, you choose either interface to power the
device, do not connect power for both of the interface at the same
time)

• Input: DC+, GND and K1, K2, K3

• Output: COM+, COM-, CH1, CH2, CH3

• The maximum load for general controller is


3A
Working mode – Free mode
Working mode – Free mode – Use case
• Connect to Smoke Sensor

DC12V + GND COM NC/NO Blue connect to DC 12V+


GND connects to COM
Red connect to GND
K1 connect to NC/NO
Working mode – DC motor
Working mode – DC motor – Use case

To get power:
Com+ connects to GND
Com- connects to DC+

CH1 CH2 connect to motor


Working mode – Two way curtains

ON

OFF

STOP

ON

OFF

Curtain motor
Working mode – Three way curtains

ON

OFF

STOP

ON

OFF
OFF

STOP

Curtain motor
Working mode – Three way switch
App Setting

- Set working mode

- Follow and jog


➢ Follow: When there is input signal, switch will reverse. For example: If K1 and GND connects once,
CH1 will reverse, if K1 and GND connects again, CH1 will reverse again.

➢ Jog: When there is input signal, switch will open, if there is no input signal, switch will close. For
example: If K1 and GND connects, CH1 connects to COM+, if K1 and GND disconnect, CH1
disconnects to COM+

- Set delay time to auto close


THANK YOU

You might also like