Changzhou Sciwil E-Mobility Technology Co., Ltd.

9th Huashan Road, Changzhou, Jiangsu, China- 213022

Fax: +86 519-85602675 Tel: +86 519-85600675

USERS GUIDE
S886-LCD
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

Contents

Introduction .................................................................................................................................................. 1

1. Safety Notes ............................................................................................................................................ 2

2. Assembly .................................................................................................................................................. 2

3. Product Size .......................................................................................................................................... 3

4. Working Voltage and Connection ................................................................................................ 3

4.1 Working Voltage ........................................................................................................................ 4

4.2 Connection ................................................................................................................................... 4

5. Functions and Key Pad ...................................................................................................................... 4

5.1 Functions ....................................................................................................................................... 4

5.2 Control and Setting Items ....................................................................................................... 5

5.3 Display Area ................................................................................................................................. 5

5.4 Settings .......................................................................................................................................... 6

5.5 Communications Protocol ........................................................................................................ 7

5.6 Key Pad ............................................................................................................................................. 7

5.7 Error Code ...................................................................................................................................... 10

5.8 Serial Code ..................................................................................................................................... 10

6. Quality and Warranty .......................................................................................................................... 11

7. Version...................................................................................................................................................... 12
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

Introduction

Congratulations on purchasing your e-bike smart display. Before use, please read
through this manual. It is important to acknowledge all the WARNINGS, SAFETY
NOTES AND INSTRUCTIONS. This manual will walk you through assembly, settings
and operations of Sciwil display products in easy steps, to facilitate operations on
your e-bike.

1
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

1. Safety Notes

PLEASE TAKE CAUTION WHEN USE，DO NOT PLUG OR UNPLUG THE DISPLAY WHILE
YOUR E-BIKE IS POWERED ON.

AVOID CLASHES OR BUMPS TO THE DISPLAY.

DO NOT TEAR THE WATER-PROOF FILM ON THE SURFACE OF THE SCREEN,

OTHERWISE THE WATER-TIGHT PERFORMANCE OF THE PRODUCT MAY BE
DEGRADED.

DISPLAY WATER-PROOF RATE: IP6

UNAUTHORIZED ADJUSTMENT TO DEFAULT SETTINGS IS NOT SUGGESTED,

OTHERWISE NORMAL USE OF YOUR E-BIKE CAN NOT BE GUARANTEED.

WHEN THE DISPLAY PRODUCT DOES NOT WORK PROPERLY, PLEASE SEND THE
IT FOR AUTHORIZED REPAIR IN TIME.

2. Assembly

Fix the display on the handlebar, adjust it to a proper facing angle. Make sure your

e-bike is powered off, then plug the connector on the display to the connector on

the controller (bus) to finish standard assembly.

2
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

3. Product Size

Material
Shell Material: ABS
Screen Cover Material: High Hardness Acrylic (same hardness as tempered glass).
Working Temperature: -20°C~60°C.

Product Size

4. Working Voltage and Connection

3
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

4.1 Working Voltage

DC 24V-60V compatible (can be set on display)，other voltage level can be

customized.

4.2 Connection

Connector to Controller Display Cable Outlet Connector Display Cable Coupling Connector

Note: Some products may use waterproof connectors, in which case the internal
wire arrangements cannot be identified from outside.

5 Functions and Key Pad

5.1 Functions

There are multiple items displayed on S886 as follows:

 Battery Level
 Speed (average, maximum, current speed)
 Distance (single Trip, total ODO)
 PAS Level
 Error Indication
 Cruise
 Brake
 Headlight Indication
4
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

5.2 Control and Setting Items

Power Switch, Light Switch, Walk Mode, Real-time Cruise, Wheel Size Setting,
PAS Level PWM Setting, Speed Limit Setting, Auto-Off Setting.

5.3 Display Area

Overall Interface (displayed within 1s at start）

4 1

Introduction of Displayed Items:

1. Battery Level

2. Versatile Area

Digital Voltage: VOL, Total Distance: ODO, Single Trip Distance: TRIP,

Riding Time: Time,

5
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

3. Current Speed: CUR, Maximum Speed: MAX, Average Speed: AVG (km/h or mph)

The display calculates riding speed based on wheel size and signals (need to set
magnet numbers for Hall motors). ，

4. PAS Status Indication Area

5.4 Settings
P01: Backlight Brightness (1: darkest; 3: brightest)

P02: Mileage Unit (0: km; 1: mile)

P03: Voltage Class (24V / 36V / 48V / 60V / 72V )

P04: Auto-Off Time

(0: never, other value means time interval for display auto-off) Unit: minute

P05: Pedal Assist Level

0/3 Gear Mode: Gear 1-2V, Gear 2-3V, Gear 3-4V

1/5 Gear Mode: Gear 1-2V, Gear 2-2.5V, Gear 3-4V, Gear 4-3.5V, Gear 5-4V

P06: Wheel Size (Unit: inch Precision: 0.1)

P07: Motor Magnets Number (for Speed Test; Range: 1-100)

P08: Speed Limit Range: 0-50km/h, no speed limit if set to 50)

1. Communications status (controller-controlled)

The driving speed will be kept constant as the limited value.

Error Value: ±1km/h (applicable to both the PAS/throttle mode)

Note: The above-mentioned values are measured by metric unit (kilometers).

When the measuring unit is set to imperial unit (mile), the speed
displayed on the panel will be automatically switched to corresponding
imperial unit, however the speed limit value in the imperial unit interface
won’t change accordingly.

P09: Direct Start / Kick-to-Start Setting

0: Direct Start
6
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

1: Kick-to-Start

P10: Drive Mode Setting

0: Pedal Assist – The specific gear of the assist drive decides the assist power
value. In this status the throttle does not work.

1: Electric Drive – The vehicle is driven by the throttle. In this status the power
gear does not work.

2: Pedal Assist + Electric Drive – Electric drive does not work in direct-start status.

P11: Pedal Assist Sensitivity (Range: 1-24)

P12: Pedal Assist Starting Intensity (Range: 0-5)

P13: Magnets Number in Pedal Assist Sensor (5 / 8 / 12pcs)

P14: Current Limit Value (12A by default; Range: 1-20A)

P15: Unspecified

P16: ODO Clearance

Press and hold the up key for 5 seconds and ODO distance will be cleared.

5.5 Communications Protocol：UART

5.6 Key Pad

Key pad position:

There are 3 keys on S886 display. In following introductions:

7
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

is called “On/Off”,

is called “Info”,

Operations include short press, press and hold of a single key or two keys：

① During riding, press Info to change PAS/throttle level among

ECO/MID/HIGH.

②During riding, press Mode to switch items displayed in versatile area.

Note：Press and hold of a single key is mainly used for switch mode/on/off

status. Press and hold of two keys is used for parameter settings.

(To avoid false operation, short press of two keys is not introduced.)

Operations:

· Switch On/Off Display

- Press and hold On/Off to switch on or off the display.

- When the display is on but the static current is under 1μA, the display will

automatically turn off after 10 minutes (or any set time by P04).

· Enter/Exit Walk Mode, Cruise Mode

- When your e-bike stops, press and hold Info to enter 6km/h walk mode.
- During riding, press and hold Info to enter real-time cruise. When in cruise

8
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

mode, press and hold Info to exit.

· Switch Displayed Items in Versatile Area

When the display is on, press On/Off to switch displayed items in versatile area.

· Settings
- Press and hold On/Off and Info to enter Settings interface. Setting items
include: Backlight Brightness, Unit, Voltage Level, Auto-Off Time, PAS Level,
Wheel Size, Motor Magnet Numbers, Speed Limit, Direct Start and Kick-to-
Start Mode, Drive Mode, PAS Sensitivity, PAS Start Power, PAS Sensor Type,
Controller Current Limit, ODO clearance, etc.

- In Settings, press On/Off to switch the above setting items; press Level/Toggle

to set parameter for the current item. The parameter will blink after set, press

On/Off to the next item and the previous parameter will be automatically

saved.

- Press and hold On/Off and Info to exit Setting, or standby for 10s to save and

exit.

9
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

5.7 Error Code

Error Code Indications Note

(decimal)
0 Normal
1 Reserved
2 Brake
3 PAS Sensor Error (riding mark) Not Realized
4 6km/h Walk Mode
5 Real-Time Cruise
6 Low Battery
7 Motor Error
8 Throttle Error
9 Controller Error
10 Communications Receiving Error
11 Communications Sending Error
12 BMS Communications Error
13 Headlight Error

10
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

5.8 Serial Code

Each Sciwil display product bears a unique Serial Code on the back shell

(as shown in the photo below)：192 2 1 210603011

Explanation to the above Serial Code:

192：Customer Code

2：Protocol Code

1：Program can be overridden（0 means can not be overridden）

210603011：P.O. (purchase order number)

6 Quality and Warranty

In compliance with local laws and normal usage, the limited warranty period
covers 24 months after the date of manufacturing (as indicated by the serial
number).
The limited warranty shall not be transferred to a third party other than as
specified in the agreement with Sciwil.

- 11
 Changzhou Sciwil E-Mobility Technology Co., Ltd.
9th Huashan Road, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675

Other situations may be covered, depending on the agreement between Sciwil

and the buyer.
Warranty Exclusions:
1. Sciwil products that have been modified or repaired without authorization
2. Sciwil products that have been used for rental, commercial applications, or
competition
3. Damage resulting from causes other than defects in material or manufacturing
process, including but not limited to an accident, neglect, improper assembly,
improper repair, maintenance alteration, modification, abnormal excessive wear
or improper use.
4. Damage due to buyer’s improper transportation or storage, and damage
during shipping (the responsible party should be determined using INCOTERMS
regulations).
5. Damage to the surface after leaving factory, including shell, screen, buttons, or
other appearance parts.
6. Damage to wiring and cables after leaving factory, including breaks and
exterior scratch.
7. Failure due to an improper user configuration or unauthorized changes in the
relevant accessories parameters, or debugging by the users or the third party.
8. Damage or loss due to force majeure.
9. Beyond the warranty period.

7 Version

This display user manual is in compliance with the general software version
(V1.0) of Changzhou Sciwil E-Mobility Technology Co., Ltd. There are chances
that display products on some e-bikes may have a different software version,
which should be subject to the actual version in use.

- 12