Ceramic

Low Pass Filter LFCN-5000

50Ω DC(1) to 5000 MHz
Generic photo used for illustration purposes only
Maximum Ratings Features CASE STYLE: FV1206
Operating Temperature -55°C to 100°C • excellent power handling, 9W
• small size
Storage Temperature -55°C to 100°C
• 7 sections
RF Power Input* 9W max. at 25°C • temperature stable e and Reel
Available Tapra cost
at no ext
* Passband rating, derate linearly to 3W at 100°C ambient. • LTCC construction Reel Size Devices/Reel
Permanent damage may occur if any of these limits are exceeded.
• protected by U.S. Patent 6,943,646 7” 20, 50, 100, 200, 500,1000, 3000

Pin Connections Applications

RF IN 1 • harmonic rejection
RF OUT 3 • VHF/UHF transmitters/receivers
• lab use
GROUND 2,4
Electrical Specifications(1,2) at 25°C
Outline Drawing Parameter F# Frequency (MHz) Min. Typ. Max. Unit

(ON TOP)
Insertion Loss DC-F1 DC-5000 — — 1.0 dB
Pass Band Freq. Cut-Off F2 5580 — 3.0 — dB
VSWR DC-F1 DC-5000 — 1.2 — :1
F3 6850 20 — — dB
Rejection Loss F4-F5 7050 — 30 — dB
Stop Band
(ON TOP) F6 18000 — 20 — dB
VSWR F3-F6 6850-18000 — 20 — :1
(1) In Applications where DC isolation to ground is required, coupling capacitors are recommended to avoid DC leakage. Alternatively, if DC
pass IN-OUT is required, Mini-Circuits’ “D” suffix version of this model will support DC IN-OUT, and provide>100 MOhm isolation to ground.
(2) Measured on Mini-Circuits Characterization Test Board TB-270.

Typical Frequency Response Electrical Schematic

PCB Land Pattern
40 R F IN R F OUT
ATTENUATION (dB)

20

3
1
DC F1 F2 F3 F4 F5 F6
FREQUENCY
Typical Performance Data at 25°C
Suggested Layout,
Tolerance to be within ±.002 Frequency Insertion Loss VSWR
(MHz) (dB) (:1)
Outline Dimensions ( inch
mm )
50.00 0.01 1.01
A B C D E F G
.126 .063 .037 .020 .032 .009 .169
500.00 0.10 1.03
3.20 1.60 0.94 0.51 0.81 0.23 4.29 1000.00 0.14 1.04
2000.00 0.26 1.07
H J K L M N P wt 3000.00 0.31 1.15
.087 .024 .122 .024 .087 .012 .071 grams
4000.00 0.51 1.25
2.21 0.61 3.10 0.61 2.21 0.30 1.80 .020
5000.00 0.68 1.05
5800.00 4.91 5.30
6830.00 40.67 22.58
Demo Board MCL P/N: TB-270 8000.00 28.12 31.03
Suggested PCB Layout (PL-137) 11000.00 32.43 157.93
13000.00 25.15 1.71
15000.00 24.88 29.46
18000.00 18.17 26.33
20000.00 23.63 8.43

LFCN-5000 LFCN-5000
INSERTION LOSS VSWR
60 1000
INSERTION LOSS (dB)

50

40 100
VSWR

30

20 10

10

0 1
0 5000 10000 15000 20000 0 5000 10000 15000 20000
FREQUENCY (MHz) FREQUENCY (MHz)

Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. REV. M
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. M173979
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled LFCN-5000
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp ED-6491/2

Mini-Circuits
® RVN/AD/CP/AM
190426

www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]