UP -------------------- STANDARD DETAIL REFERENCE DRAWINGS

| BILL OF MATERIAL |
DETAIL OF HEAVY WELDING BOSSES FOR THREADED CONNECTIONS AE-036175
-------------------- CONSTRUCTION-NOTES AND DETAILS FOR ISOMETRIC PIPING AD-036627

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL, OR IN PART, SHALL BE OBTAINED FROM THIS DRAWING WITHOUT THE WRITTEN CONSENT OF SAUDI ARAMCO.
AWAY AWAY

N PT NPD INSULATION DETAILS FOR HOT PIPING

INSULATION DETAILS FOR COLD PIPING

AA-036911

AA-036913
NO DESCRIPTION (IN) CMDTY CODE QTY INSTALLATION OF JACK SCREWS FOR FLANGED JOINTS AC-036630
-- PIPE ----------- -- ----- ---- ---
----
TOWARD TOWARD
1 PIPE SCH 40 SEAMLESS, BE API 5L GR.B PSL 8 P_1LE2P022 7.320 M
2, (INTERNAL FBE LINED/EXTERNAL COAT
DOWN
WITH APCS-113C) (NACE MR-0175/ISO
15156), ASME B36.10M NOTES
1. MATERIAL SHOWN WITH A BROKEN LINE AND SPOOLS LISTED IN THE SAUDI ARAMCO

FITTINGS FABRICATION LIST ARE NOT TO BE FURNISHED BY THE VENDOR.

-------- 2. PIPING DETAILS SHALL BE CUT AT ALL POINTS MARKED F.W. (FIELD WELD).

2 TEE SCH 40 SEAMLESS, BW, ASTM A234 8X8 T_1LE2P022 1 3. EACH FABRICATED SECTION SHALL BE CLEARLY MARKED WITH ITS CODE NUMBER.

GR.WPB, (INTERNAL FBE LINED/EXTERNAL 4. UNLESS OTHERWISE NOTED. (A) ALL DIMENSIONS ARE TO C OR FACE OF FLANGES.
(B) BOLT HOLES ON FLANGES STRADDLE C. (C) WELDING ELBOWS ARE LONG RADIUS.
COAT WITH APCS-113C) (NACE
5. FABRICATION SHALL BE IN ACCORDANCE WITH SAUDI ARAMCO SPECIFICATION
MR-0175/ISO 15156), ASME B16.9 01-SAMSS-10.

3 REDUCING TEE SCH 40 X SCH 40 SEAMLESS, 8X4 TRB_1LE2P022 1

6. GASKET ALLOWANCE PER SPEC
BW, ASTM A234 GR.WPB, (INTERNAL FBE
7. PIPING MATERIAL IS PER BOM
LINED/EXTERNAL COAT WITH APCS-113C)
PIPE SIZE SCHEDULE SPECIFICATION
(NACE MR-0175/ISO 15156), ASME B16.9
4 90 DEG LR ELBOW SCH 40 SEAMLESS, BW, 8 E_1LE2P022 1
ASTM A234 GR.WPB, (INTERNAL FBE
CONT.ON
LINED/EXTERNAL COAT WITH APCS-113C)
8"-WBD-9521-1LE9P1-N_01 (NACE MR-0175/ISO 15156), ASME B16.9

/ 1103
FLANGES 8. WELDING STRESS RELIEF - YES NO
752305-109 -------
PER SAES-W-011 TABLE 17.6.2.1
100% X-RAY SPOT X-RAY 01-SAMSS-10

E 203000 5 FLANGE CLASS 150, SCH 40, WN, RF ASTM 8 F_1LE2P022 5

NO
9. TESTING SHOP HYDROSTATIC TEST - YES
A105N, (INTERNAL FBE LINED) (NACE
N 378494 THE SHOP HYDROSTATIC TEST SHALL BE CARRIED OUT ON PIECES HAVING ALL ENDS

MR-0175/ISO 15156), ASME B16.5 FLANGED. HYDROSTATIC TEST PRESSURE PER HYDROTEST DIAGRAM

EL.103110 6 FLANGE CLASS 150, SCH 40, WN, RF ASTM 4 F_1LE2P022 1 10. ALL PIPING MATERIAL IS IN ACCORDANCE WITH SAUDI ARAMCO ENGINEERING

A105N, (INTERNAL FBE LINED) (NACE SPECIFICATION SAES-L-105 CLASS 1LE2P02 .

ALL EXCEPTIONS ARE NOTED ON THE ISOMETRIC.
MR-0175/ISO 15156), ASME B16.5
TPL-B97-755
11. INSULATION

GASKETS INSULATION TYPE & THK. ON DWG.

------- 12. TIE-IN LOCATIONS AND DETAILS SHALL BE FIELD VERIFIED BEFORE START OF WORK.

7 7.4 MM THK INSULATING GASKETS, GRE NEMA 8 IG_1CS9P3 2 13. FOR SMALL BORE LINES (UPTO 1-1/2") DIMENSIONS, ROUTING & SUPPORTING SHALL

G10/G11, SS316 CORE, NOMEX SLEEVES BE FIELD ADJUSTED.

F5 G7 B11 WITH G3 WASHERS AND STEEL BACK-UP 14. ALL DIMENSIONS AND COORDINATES ARE IN MM. CONTRACTOR TO FIELD VERIFY ALL

WASHERS TO SUITE CL 150, ASME B16.5 DIMENSIONS PRIOR TO CONSTRUCTION.

S13 CONT.ON
15. FOR INTERNAL LINED PIPE, LINING SHALL BE DONE AFTER SPOOL FABRICATION
RF FLANGE
1 GL01-8 8"-WBD-9521-1LE2P02-N_01 & COMPLETION OF ALL HOT WORKS.
8 4.5 MM THK GASKETS SPIRAL-WOUND, SS316 8 G_5CS9U1 1
/ 1103 WINDINGS, FLEXIBLE GRAPHITE FILLED, 16. FOR GALVANIZED PIPE, GALVANIZING SHALL BE DONE AFTER SPOOL FABRICATION

& COMPLETION OF ALL HOT WORKS.

752305-109 WITH SS316 OUTER RING, ASME B16.20,
ASME B16.5, CL 150
E 203766 9 7.4 MM THK INSULATING GASKETS, GRE NEMA 4 IG_1CS9P3 1 SPOOLS TO BE FABRICATED BY VENDOR
CONT.ON
N 370200 G10/G11, SS316 CORE, NOMEX SLEEVES NO.
MARK NO. SIZE
WEIGHT NO.
MARK NO. SIZE
WEIGHT
PIECES
SHT 2 WITH G3 WASHERS AND STEEL BACK-UP
LBS PIECES LBS

EL.103110
75 E 203279 WASHERS TO SUITE CL 150, ASME B16.5
23 RF FLANGE
2 N 370683
9
8X8"NS 27
43 EL.103110 BOLTS
4 -----
CPS-058-4650-001 F5 10 BOLTING ASTM A193 GR.B7M STUD BOLTS, 3/4 B_9CS9P1 16
SEMI-FINISHED HEAVY PATTERN, ASTM
232
A194 GR.2HM, W/2 HEAVY HEX NUTS,
115.0MM BOLT LENGTH
11 BOLTING ASTM A193 GR.B7M STUD BOLTS, 3/4 B_9CS9P1 8
F5 G8 B10 TPL-B97-768 SEMI-FINISHED HEAVY PATTERN, ASTM SPOOLS TO BE FABRICATED BY SAUDI ARAMCO
27 A194 GR.2HM, W/2 HEAVY HEX NUTS, NO. NO.
9 PIECES
MARK NO. SIZE
PIECES
MARK NO. SIZE

F5 TPL-B97-767 135.0MM BOLT LENGTH

48 12 BOLTING ASTM A193 GR.B7M STUD BOLTS, 5/8 B_9CS9P1 8
3 4 9
27 SEMI-FINISHED HEAVY PATTERN, ASTM
8"NS A194 GR.2HM, W/2 HEAVY HEX NUTS,
CONT.ON 3
48 115.0MM BOLT LENGTH
4"-WBD-9601-1LE9P1-N_01
PIPE SUPPORTS
/ 1103
-------------
752305-111 13 PIPE SUPPORT 8 GL01-8 1
3
E 203483
8X4"NS
N 370200 REFERENCE DRAWINGS
EL.103346 DWG. CONTROL FOR J.O. 10-12862-0001 TD-718027

PIPING PLAN BA-752286

F6 G9 B12
HYDROTEST DIAGRAM TA-011935001

F5 G7 B10
8"-WBD-14622-1LE2P02

REVISION VALIDATION

THIS REVISION NO. IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

0F1
REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

10-12862-0001-029

DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER

(DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)

ENG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

FAW LAK ASD AHB

06/12/23 06/12/23 06/12/23 06/12/23

REV.NO.DATE REVISION DESCRIPTION

0F1 06/12/23 ISSUED FOR CONSTRUCTION

JOB ORDER/EWO NO.

THIS REVISION IS NOT TO BE USED FOR
10-12862-0001 CONSTRUCTION UNTIL CERTIFIED AND DATED
STRESS SYSTEM (SYS-) 058

PIPING CLASS 1LE2P02 SAUDI ARABIAN OIL COMPANY

DRAWING TYPE

P & ID No. BA-747596001 ISO 8"-WBD-14622-1LE2P02-B97

ISO
OPER/DESN PRESS.(psig) 213.5 / 231
INLET & GAS TREATMENT SHAYBAH
OPER/DESN TEMP.( F) 58.7 / 200
INLET FACILITIES
FLUID PHASE LIQUID
MODULE NO: SHAYBAH SAUDI ARABIA
PAINT SPEC (APCS-) 1D
PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

LINE ID B97-WBD-14622-B97-01
B97 L TB-013519 001 0F1
Saudi Aramco 5994 ENG. (09/03)

RESTRICTED VECTOR CADD-05

20/03/2024 10:33:01 Wison