Technical Specifications
Technical Specifications
SPECIFICATION
Model: HLD-B2/HLD-S2
Code HLD16 JS
Version V1.3
Date 2008.02
CONTENTS
Electrical specification
Input voltage 24 VDC (19 – 28 VDC)
Power consumption < 200 W
Serial input 16 channels according to IEC 61162-1/-2/-101/-102
RS-232C or RS-485 (jumper selectable)
Serial output 1 channel RS-485
Serial output 1 channel RS-232C
Serial input/ output 2 channels RS-485
Serial input/output 1 channel RS-232C
Environmental specification
Enclosure material Steel
Enclosure protection IP22
EMC IEC 60945
Color RAL 7021
Operating temperature -15°C to +55°C
Operating Humidity 40 to 90 % RH (non condensing)
3 Power Supply Unit(PSU)
Mechanical specification(excluding mounting accessories)
Height 360 mm
Width 280 mm
Depth 202.5 mm
Weight 22 kg
Electrical specification
Input voltage 110 / 220 VAC, frequency 50 or 60 Hz, and 24 VDC
Max current at lowest input 5 A RMS
voltage
Max power output load 10A, 7A continuous
Serial inputs RS-232C
Serial outputs RS-232C
Environmental specification
Enclosure material Steel
Enclosure protection IP22
EMC IEC 60945
Color RAL 7021
Operating temperature -15°C to +55° C
Operating Humidity 40 to 90 % RH (non condensing)
Width 159.5mm
Depth 25.5 mm
Weight 0.75kg
Electrical specification
Input voltage 24 VDC
Current 400 mA maximum
Serial input Isolated IEC 61162-1 (NMEA) based on RS485
driver
Serial output Isolated IEC 61162-1 (NMEA) based on RS 485
driver
Relay outputs 2 Switching relays, 1 NO, 1 NC
Rated Maximum current 2A,
Maximum voltage 125 VAC, 60 VDC
Maximum switching capacity: 30 W
Environmental specification
Enclosure material Aluminum
Enclosure protection IP22
EMC IEC 60945
Radiated Noise IEC 60945
Color RAL 7021
Operating temperature -15°C to +55° C
Electrical specification
Input Voltage 24 VDC, ±20%
Voltage Variation 19.2 to 28.8 VDC
Excessive Conditions 16-36 VDC, Fuse cutoff >36VDC, reverse polarity
Power Consumption 10W nominal
Memory Type Solid State
Capacity 12-hour minimum (1.5GB to 4GB)
Computer Interface 10Base-T(IEEE802.3) / 100Base-TX(IEEE802.3u)
Release mechanism 50 lb. pull on release clamp
Underwater Acoustic Beacon SA 8405 compliant
Environmental specification
Material Steel
Color Fluorescent International Orange
Vibration 2.5 to 13.2 Hz +/-1mm, 13.2 to 100Hz @ 7m/s2
Shock 50 g, 11 ms, 1/2 sine, 3 orthogonal directions, 3
shocks each
Penetration 250 kg weight with 100mm pin dropped from 3
meters height
Low Temp Fire 10 hours @ 260 °C
High Temp Fire 1 hour @ 1100 °C
Deep-Sea Immersion 60 Mpa (6000 meters) for 24 hours
Seawater Immersion 0.03 Mpa (3 meters) for 30 days
Dry Heat 70 °C storage test, 55 °C functional test
Damp Heat 40 °C and 93% humidity functional test
Low Temperature -25 °C functional test
Rain 30 Minutes @ 100 liters/min from 2.5 meters
Compass Safe Distance 98 cm from the ship’s standard compass and
80 cm from the steering, standby and emergency
compass
6 Interior Microphone
Mechanical specification
Height 67 mm
Width 115 mm
Depth 22.5 mm
Weight 0.4 kg
Electrical specification
Input voltage 10 VDC
Environmental specification
Enclosure material Aluminum
Enclosure protection IP22
EMC IEC 60945
Color RAL 7021
Operating temperature -15°C to +55° C
Operating Humidity 40 to 90 % RH (non condensing)
7 Exterior Microphone
Mechanical specification(excluding mounting accessories)
Height 67 mm
Width 139 mm
Depth 57 mm
Weight 0.75 kg
Electrical specification
Input voltage 10 VDC
Environmental specification
Enclosure material Aluminum
Enclosure protection IP67
EMC IEC 60945
Color RAL 7021
Operating temperature -25°C to +55° C
Operating Humidity 40 to 90 % RH (non condensing)
Electrical specification
Input voltage 24 VDC ± 10%
Power consumption 30 W nominal
Interface with MU RS422
Format: IEC61162-1 NMEA0183 XDR sentence
Interval of reporting to MU Whole data set per second
Amount of data acquisition Max. 6
board
Analog input Input channels: 4
Input interface: -10 V to +10 V; 4 to 20 mA
A/D bits: 12
Isolation voltage: input to output and channel to
channel 500 VDC 1 minute
Input resistance: >100 kΩ
Sampling accuracy: 0.5%
Switching signal input Input channels: 16 per module with COM
Isolation voltage: input to output 500 VDC for
1minute
Input resistance: >100 kΩ
Dry contact input Input channels: 16 per module with COM
Isolation voltage: input ~ output 500VDC 1 minute
Input resistance: >100 kΩ
Environmental specification
Dry Heat 55°C storage and working
Damp Heat 40 °C and 93% humidity storage and working
Low Temperature -15 °C storage and working