APPLIED PHYSICS-2/DEC-18/SEM-2

Q.1.a) Find the divergence of the vector function A=x 2 i+x2y2 j+24x2y2z3 k.
Ans.
The diversion of vector function is
𝜕 𝜕 𝜕 𝜕𝑓1 𝜕𝑓2 𝜕𝑓3
∇. 𝐹 = ( , , ) . (𝑓1. 𝑓2. 𝑓3) = , ,
𝜕𝑥 𝜕𝑦 𝜕𝑧 𝜕𝑥 𝜕𝑦 𝜕𝑧
𝜕 2 𝜕 2 2 𝜕
∇. 𝐹 = (𝑥 )𝑖 + (𝑥 𝑦 )𝑗 + 24 (𝑥 2 𝑦 2 𝑧 3 )𝑘
𝜕𝑥 𝜕𝑦 𝜕𝑧
∇. 𝐹 = 2𝑥 + 2𝑥 2 𝑦 + 72𝑥 2 𝑦 2 𝑧 2
Thus, divergence of vector function is 𝟐𝒙 + 𝟐𝒙𝟐 𝒚 + 𝟕𝟐𝒙𝟐 𝒚𝟐 𝒛𝟐 .

Q.1. b) What is antireflection coating? What should be the refractive index

and minimum thickness of the coating?
Ans.
When the light enters the optical instrument at the glass air interface, around 4% of
light that too at single reflection is lost by reflection which is highly undesirable. In
order to reduce the reflection loss, a transparent film of proper thickness is deposited
on the surface. This film is known as antireflective coating.

Popular material used is MgF2 because of its refractive index is 1.38.

The minimum thickness of coating is given by: -

2nt = mλ

n = refractive index of film

t = thickness of film

m = 1, 2, 3, …

λ = light wavelength in vacuum (air)

Q.1. c) A glass material A with an optical fibre is made has a refractive index
of 1.55. This material is clad with another material whose refractive index is
1.51. The light in the fibre is launched from air. Calculate the numerical
aperture of the fibre.

Ans.
Given: n1=1.55

n2=1.51

To Find: NA=?

Formula: NA=√𝑛12 − 𝑛22

NA=√1.552 − 1.512

NA=0.35.

Q.1. d) What is difference between Bottom up and Top Down Approach with
respect to Nanotechnology.

Ans.
In nano science, we are suppose to arrive at nano scale assembly. This can be
obtained by two approaches:

1) Bottom Up Approach:

In this nano materials are made by building atom by atom or molecule by molecule.

2) Top Down Approach:

In this a bulk material is broken in size or pattern. The techniques developed under
this tile are modified or improved one what we have in use to fabricate micro-
processors, Micro-Electro-Mechanical Systems(MEMS) etc.

Q.1.e) Write difference between LED and Laser Diode.

Ans.
LASERs (also known as laser diodes or LD) and LEDs (light emitting diode) have
different characteristics in the way in which they emit light. While a LASER emits
converged light, the output of an LED is highly diverged.

The spectral width of an LED is bigger than that of a LD. A bigger spectral width
enables higher link bandwidth on the FOC. For an LED the spectral width is about 80
nm when it operates at 1310 nm and 40 nm at 850 nm. The spectral width of a LD is
3 nm for operation at 1310 nm and 1 nm at 850 nm.
Q.1.f) How is Lissajous figures used to measure unknown frequency?
Ans.

Lissajous figure will be displayed on the screen, when the sinusoidal signals are
applied to both horizontal & vertical deflection plates of CRO. Hence, apply the
sinusoidal signal, which has standard known frequency to the horizontal deflection
plates of CRO. Similarly, apply the sinusoidal signal, whose frequency is unknown to
the vertical deflection plates of CRO

Let, 𝑓𝐻 and 𝑓𝑉 are the frequencies of sinusoidal signals, which are applied to the
horizontal & vertical deflection plates of CRO respectively. The relationship
between 𝑓𝐻 and 𝑓𝑉 can be mathematically represented as below.

𝒇𝑽 𝒏 𝑯
=
𝒇𝑯 𝒏 𝑽

From above relation, we will get the frequency of sinusoidal signal, which is applied
to the vertical deflection plates of CRO as
𝒏𝑯
𝒇𝑽 = ( )𝒇
𝒏𝑽 𝑯

Where,

𝑛𝐻 is the number of horizontal tangencies

𝑛𝑉 is the number of vertical tangencies
We can find the values of 𝑛𝐻 and 𝑛𝑉 from Lissajous figure. So, by substituting the
values of 𝑛𝐻 , 𝑛𝑉 and 𝑓𝐻 in Equation 1, we will get the value of 𝑓𝑉 , i.e. the frequency of
sinusoidal signal that is applied to the vertical deflection plates of CRO.

Q.1. g) A parallel beam of light of wavelength 5890 A0 is incident on a glass

plate having refractive index 𝝁 = 𝟏. 𝟓 such that the angle of refraction in the
plate is 600. Calculate the smallest thickness of the glass plate which will
appear dark by reflected light.
Ans.
Given: - λ=5890 x 10-8 cm

𝜇=1.5

r=600

To Find: - t=?

Formula: - 2 𝜇t cos r= n λ
The smallest thickness will be for n=1,

2 × 1.5 × 𝑡 × cos 60 = 1 × 5890 × 10−8

5890 × 10−8
𝑡=
2 × 1.5 × 0.5
𝒕 = 𝟑𝟗𝟐𝟔 × 𝟏𝟎−𝟖 𝒄𝒎

Q.2. a) With the help of proper diagram and necessary equation, explain how
Newtons ring experiment is useful to determine the radius of curvature of
plano convex lens. In a newton rings experiment the diameter of 5th dark ring
is 0.336 cm and the diameter of 15th ring is 0.590 cm. Find the radius of
curvature of plano convex lens if the wavelength of light used is 5890 A 0.
Ans.
Consider a planoconvex lens of radius ‘R’ as shown.

As radius is comparatively large, the space between lens and base can be
considered as wedge shaped.
Thus path difference is given by

For almost normal incidence,

Now,
From (i) and (ii)

For Bright Rings:-

Using above formula, by calculating diameter of nth bright ring for a given
wavelength of light, we can calculate the radius of curvature.

Given: - D5= 0.336 cm

D15= 0.590 cm

λ=5890 x 10-8 cm

To Find: - R=?

𝑛 𝐷2
Formula: - 𝑅 = 2(2𝑛−1)𝜆

𝐷25 𝐷215
𝑅= −
2(2 × 5 − 1) × 5890 × 10−8 2(2 × 15 − 1) × 5890 × 10−8
Therefore,

2
0.3362 0.590
𝑅= −8
−
2(2 × 5 − 1) × 5890 × 10 2(2 × 15 − 1) × 5890 × 10−8

𝑅 = 4.59 𝑐𝑚
Thus radius of curvature of plano convex lens is 4.59 cm.
Q.2.b) What is monomode and multimode fibre? Explain the term V-number,
Calculate the number of modes of a step index optical fibre of diameter
40 𝝁𝒎 will transmit as its core and cladding refractive indices are 1.5 and 1.46
respectively. Wavelength of light used is 1.5 𝝁𝒎.
Ans.
Monomode:
1. It supports only 1 mode of propagation
2. It has very small core diameter of the order 5 to 10μm
3. Transmission losses are very small
4. It has higher bandwidth
5. It requires laser diode as source of light
6. It is used for long distance.
7. It is by default step index fibre
8. Mostly it is made up of glass

Multimode:
1. It supports large on of modes of propagation
2. It has larger core diameter of the order 50 to 150μm
3. Transmission losses are more
4. It has lower bandwidth
5. It can work with LED also
6. It is used for long distance communication
7. It can be step index or graded index fibre
8. It is made preferably from plastic

The normalized Frequency parameter or V-number gives the upper limit of the
number of Modes that can be transmitted in a multimode optical fiber. It depends
on the core diameter, dc, the NA, and the wavelength.
2𝜋𝑎
𝑉= × √𝑛12 − 𝑛22
λ
2𝜋𝑎
𝑉= × 𝑁𝐴
λ
where, a=core radius

λ=wavelength in vacuum

n1=maximum refractive index of core

n2=refractive index of cladding

Given: - d=40 𝜇𝑚

n1=1.5

n2=1.46

λ=1.5 𝜇𝑚

Formula: - NA=√𝑛12 − 𝑛22

1 𝜋𝑑 2
𝑀= ( × 𝑁𝐴)
2 λ

NA=√1.52 − 1.462

NA=0.344
2
1 𝜋 × 40 × 10−6
𝑀= ( × 0.344)
2 1.5 × 10−6

M=415

Q.3.a) With a neat energy level diagram describe the construction and
working of He-Ne Laser. What are the merits and demerits?
Ans.
It consists of a long discharge tube of length 50 cm and diameter 1 cm. The tube is
filled with a mixture of He and Ne in the ratio 10:1. Electrodes are provided to
produce a discharge in the gas and they are connected to high voltage power
supply. The tube is sealed by inclined windows arranged at its end. On the axis of
tube two reflectors are fixed which forms resonator.

He Ne gas laser employ four level pumping schemes. When the power is switched
on the electric field ionizes some of the atoms in the mixture of He and Ne gases.
Due to electric field, the electrons and ions will be accelerated towards anode and
cathode. Since electron have smaller mass they acquire higher velocity and He
atoms are lighter in weight and therefore readily excitable.
The energetic electrons excite He atoms to excited states F2 and F3which lies at 19
ev and 20 ev above the ground state. These are metastable states for helium.
Though the radiative transitions is forbidden, the excited He atom can return to the
ground state by transferring their energy to Ne atoms through collision. Such an
energy transfer can take place only when the two colliding atoms have identical
energy states. E6 and E4 level of Ne atom nearly coincides with F3 and F2 of Helium.
Ne atoms acquires energy and goes to excited state and helium atoms return to
ground state by transferring their energy to Ne atoms. This is main pumping
mechanism. Ne atoms are active centers and Helium plays the role of pumping
agent.
The probability of energy transfer from Ne to He atom is less as there are 10 Helium
atoms to 1 Neon atom. E6 and E4 states are metastable states as collision goes on
neon atoms accumulate in these states whereas E5 and E3 level of neon are sparsely
populated.
Therefore, a state of population inversion is achieved between E6
and E5, E6 and E3 and E4 and E3. Consequently, three laser transitions take place.
E6-----E5 33900 A° (far IR region) E6-------E3 6328 A° (visible) E4----E3 11500 A° (IR region)

As the terminal levels of lasing transitions are sparsely populated the fraction of Ne
atom that must be excited to upper level can be much less. As such the power
required for pumping is low. Random photons emitted spontaneously sets stimulated
emission and coherent radiation is produced.
From E5 and E3 level neon atom can make downward transition to E2 level.
Incoherent light is emitted due to spontaneous transition. As lower levels depopulate
faster than upper levels it is easier to maintain population inversion throughout laser
operation. E2 is again a metastable state.
Therefore, Ne atoms tends to accumulate at this level again. However, they are
made to collide with the walls of discharge tube and they give up their energy and
returns to ground state.
Merits:

• Continuous output laser source

• Highly stable
• No separate cooling is required

Demerits:

• Low efficiency and low power output

• Gases are novel medium for laser as gases are found in the purest form so
their optical properties are well defined.

Q.3.b) What is diffraction grating and grating element? Explain experimental

method to determine the wavelength of the spectral line using diffraction
grating?
Ans.
A diffraction grating consists of a closely spaced aperture of width ‘a’ separated by
opaque interval of width ‘b’. AB, CD, EF …. are apertures and BC, DE, FG are
opaque parts. Consider point A and C on grating. These are called corresponding
points. The distance between any such pair of points equals to (a+b) and is called
grating element or grating constant. If there are N apertures and N opaque interval
in 1 m then N(a+b) = 1
∴a+b=1/N

Grating element is equal to the reciprocal of number of lines per cm on grating.

Let a train of plane waves be incident normally on grating. Considering light rays
passing through the grating straight will be conveyed at ‘P’ As the wavelets through
the various slits reach the point ‘p’ after covering equal distance. ‘P’ is called as zero
order principle maxima.
Let us consider the light leaving the various slits at an angle θ with that of incident
beam. From point A draw the normal. There is the path difference between the rays
starting from various slit and reaching θ
Suppose θ is such that CL = λ , EM = 2λ, GN = 3λ and so on.
The waves from all these elements are in phase at grating and are also in phase
along the line AR and reach Q in phase.
Therefore, the reinforce each other and produced first order principle maxima at Q.
If θ such that CL = 2λ then again waves will be in phase and produce second order
maxima.
In ∆ACL sinθ= λ / (a+b)
(a+b) sin θ = λ
In general (a+b) sin θ =n λ
Each slit in the grating produces its own diffraction pattern.since the slits are very
large in number.only few maxima are seen whereas other maximas and minimas are
suppressed.
To find resultant intensity all the secondary wave in each can be replaced by a
single slit of amplitude (Em sin α) / α starting from the midpoint of the slit and traveling
at an angle θ with normal.
Let the path difference between the waves starting from midpoint of slit equal to λ
For path difference λ, phase difference 2π
For path difference (a+b) sin θ, phase difference ∆∅= (2π/λ) (a+b)sinθ
∆∅=2β β= (π/λ) (a+b)sinθ ………………….(1)
To find the resultant amplitude, we have to find the resultant of N vibration of
amplitude (Em sin α) / α and the phase difference is 2β. And it is found out by vector
addition method

We know that I α E2

The first factor (sin2 α) / α 2 in equation (3) gives the intensity distribution due to single
slit and second factor
(sin2 Nβ) / (sin2 β) gives the intensity pattern due to N slits
For Iθ to be maximum sin β = 0
But sin β = 0 sin Nβ = 0
Using L hospital rule
lim┬(β→±mπ) {d(sinNβ)/d(sinβ)}
=N (cosNβ )/cosβ
=N (cosNmπ )/(cosmπ )
=N
Therefore (sin2 Nβ) / (sin2 β) = N2
So equation (3) becomes

Condition for maxima β = ±mπ

[ π/λ (a+b)sinθ] = ±mπ
(a+b)sinθ= ±mλ m = 1,2,3,4…………………
For minima Nβ = ±mπ N ( π)/λ (a+b)sinθ= ±mπ N(a+b)sinθ= ±mλ m can be taken all
the values except 0,N,2N,……………nN. Because for all the values condition for
maxima will be satisfied therefore m can be (nN±1) values.

Determination of Wavelength of Light using Diffraction Grating

The diffraction grating is often used in the laboratories for the determination of
wavelength of light. The grating spectrum of the given source of monochromatic
light is obtained by using a spectrometer. The arrangement is as shown in Figure
shown below The spectrometer is first adjusted for parallel rays. The grating is then
placed on the prism table and adjusted for normal incidence. In the same direction
as that of the incident light, the direct image of the slit or the zero-order spectrum
can be seen in the telescope. On either side of this direct image a symmetrical
diffraction pattern consisting of different orders can be seen. The angle of diffraction
θ for a particular order m of the spectrum is measured.
The numbers of lines per inch of grating are written over it by the manufacturers.
Thus using the equation, a + b) sin θ = mλ
The unknown wavelength λ can be calculated by putting the values of the grating
element (a + b), the order m and the angle of diffraction θ.

Q.4.a) With a neat diagram explain the construction and working of scanning
electron microscope.

Ans.
Scanning electron microscope is an improved model of an electron microscope.
SEM is used to study the three dimensional image of the specimen.

Principle:

When the accelerated primary electrons strikes the sample , it produces secondary
electrons . these secondary electrons are collected by a positive charged electron
detector which in turn gives a 3- dimensional image of the sample.

Construction:

It consists of an electron gun to produce high energy electron beam. A magnetic

condensing lens is used to condense the electron beam and a scanning coil is
arranged in-between magnetic condensing lens and the sample.
The electron detector (Scintillator) is used to collect the secondary electrons and
can be converted into electrical signal. These signals can be fed into CRO through
video amplifier as shown.
Working:

Stream of electrons are produced by the electron gun and these primary electrons
are accelerated by the grid and anode. These accelerated primary electrons are
made to be incident on the sample through condensing lenses and scanning coil.

These high speed primary electrons on falling over the sample produces low energy
secondary electrons. The collection of secondary electrons are very difficult and
hence a high voltage is applied to the collector.
These collected electrons produce scintillations on to the photo multiplier tube are
converted into electrical signals. These signals are amplified by the video amplifier
and is fed to the CRO.
By similar procedure the electron beam scans from left to right and the whole
picture of the sample is obtained in the CRO screen.
Q.4.b) Derive Bethe’s Law for electron refraction.
Ans.
Region I has potential V1 and region II has potential V2. The plane surface AB
constitutes one of the equipotential surfaces. Let an electron with velocity v1 enter
region I making an angle I with the normal. As the electron passes through the
equipotential surface AB, it experiences a force which alters its velocity. Because the
electric field exists only in the y-direction, the vertical component (y-component) of
electron changes while the tangential component (x-component) remains
constant.
𝑣1𝑥 = 𝑣2𝑥
𝑣1 sin 𝑖 = 𝑣2 sin 𝑟
sin 𝑖 𝑣2
=
sin 𝑟 𝑣1
If V1>V2, 𝑣1𝑦 increases while if V2>V1, 𝑣2𝑦 increases.

In our case we have taken V2>V1. As the electrons move through the electric field
their kinetic energy is provided by the respective potential energy of the electric
fields.
Hencemv12/2=qV1
And mv22/2=qV2
Dividing the above equation we get,
v12/ v22= V1/ V2
v1/ v2=√𝑉1/𝑉2

𝐬𝐢𝐧 𝒊 𝒗 𝑽𝟐
Hence we get, = 𝒗𝟐 = √𝑽𝟏
𝐬𝐢𝐧 𝒓 𝟏

This is known as Bethe’s law of electron refraction.

Q.4.c) Derive the condition for absent spectra in grating.
Ans.
Absent Spectra with a Diffraction Grating

• It may be possible that while the first order spectra is clearly visible, second
order may be not be visible at all and the third order may again be visible. It
happen when for again angle of diffraction 0, the path difference between
the diffracted ray from the two extreme ends of one slit is equal to an integral
multiple of A if the path difference between the secondary waves from the
corresponding point in the two halves will be A/2 and they will can all one
another effect resulting is zero intensity. Thus the mining of single slit pattern
are obtained in the direction given by.

a sin θ= mλ ____ (1 )
where m = 1, 2, 3, …… excluding zero but the condition for nth order principles
maximum in the grating spectrum is
(a + b) sin θ = nλ … ___ (2)

• If the two conditions given by equation (2) are simultaneously satisfied then
the direction in which the grating spectrum should give us a maximum every
slit by itself will produce darkness in that direction and hence the most
favourable phase for reinforcement will not be able to produce an
illumination i.e., the resultant intensity will be zero and hence the absent
spectrum. Therefore dividing equation (2) by equation (1)

((a+ b) sin θ)/a sin θ =n/ m

(a+ b) /a =n/m

• This is the condition for the absent spectra in the diffraction pattern If a= b i.e.,
the width of transparent portion is equal to the width of opaque portion
then from equation (3) n = 2m i.e., 2nd, 4th, 6th etc., orders of the spectra will
be absent corresponds to the minima due to single slit given by m = 1, 2, 3
etc.

b = 2a
n=3m
i.e., 3rd, 6th, 9th etc., order of the spectra will be absent corresponding to a minima
due to a
single slit given by m = 1, 2, 3 etc.
Q.5.a) Draw the block diagram of an optical fibre communication system
and explain function of each block.
Ans.

• The optical fiber consists of three main elements:

1. Transmitter: An electric signal is applied to the optical transmitter. The optical

transmitter consists of driver circuit, light source and fiber flylead.
o Driver circuit drives the light source.
o Light source converts electrical signal to optical signal.
o Fiber flylead is used to connect optical signal to optical fiber.
2. Transmission channel: It consists of a cable that provides mechanical and
environmental protection to the optical fibers contained inside. Each optical
fiber acts as an individual channel.
o Optical splice is used to permanently join two individual optical fibers.
 o Optical connector is for temporary non-fixed joints between two
individual optical fibers.
o Optical coupler or splitter provides signal to other devices.
o Repeater converts the optical signal into electrical signal using optical
receiver and passes it to electronic circuit where it is reshaped and
amplified as it gets attenuated and distorted with increasing distance
because of scattering, absorption and dispersion in waveguides, and
this signal is then again converted into optical signal by the optical
transmitter.
3. Receiver: Optical signal is applied to the optical receiver. It consists of photo
detector, amplifier and signal restorer.
o Photo detector converts the optical signal to electrical signal.
o Signal restorers and amplifiers are used to improve signal to noise ratio
of the signal as there are chances of noise to be introduced in the
signal due to the use of photo detectors.
• For short distance communication only main elements are required.
Source- LED
Fiber- Multimode step index fiber
Detector- PIN detector
• For long distance communication along with the main elements there is need
for couplers, beam splitters, repeaters, optical amplifiers.
Source- LASER diode
Fiber- single mode fiber
Detector- Avalanche photo diode (APD)

Q.5.b) Derive Maxwell’s Third Equation.

Ans.
According to Faraday’s Law, electromagnetic force induced in a closed loop is
negative rate of charge of magnetic flux.
𝑑∅
𝑒=−
𝑑𝑡
Total magnetic flux on any arbitrary surface S

∅ = ∮ 𝐵. 𝑑𝑠

𝑑 𝑑𝐵
𝑒=− [∮ 𝐵. 𝑑𝑠] = − ∮ [ ] . 𝑑𝑠
𝑑𝑡 𝑑𝑡
The electromotive force is the work done in carrying a unit charge around the
closed loop.
 𝑒 = ∮ 𝐸. 𝑑𝑙

𝑑𝐵
∮ 𝐸. 𝑑𝑙 = − ∮ [ ] . 𝑑𝑠
𝑑𝑡
By using Stokes theorem contour integration can be converted to surface
integration as

∮ 𝐸. 𝑑𝑙 = ∮[∇ × 𝐸]. 𝑑𝑠

𝑑𝐵
∮[∇ × 𝐸]. 𝑑𝑠 = − ∮ . 𝑑𝑠
𝑑𝑡
𝑑𝐵
∮ [∇ × 𝐸 + ] . 𝑑𝑠 = 0
𝑑𝑡
𝒅𝑩
𝛁×𝑬 =−
𝒅𝒕
This is Maxwell’s third equation.

Q.5.c) An electron enters a uniform magnetic field B=0.23x10 -2 Wb/m2 at 450

angle to B. Determine the radius and pitch of helical path. Assume electron
speed to be 3x107 m/s.
Ans.
Given:- B=0.23x10-2 Wb/m2

v=3x107 m/s

e=1.6x10-19 C

m=9.1x10-31 kg

Formula: R=mv/eB

9.1 × 10−31 × 3 × 107

𝑅=
1.6 × 10−19 × 0.23 × 10−2

R=0.074 m

Thus the radius of helical path is 0.074m.

Q.6.a) If 𝑨 = 𝒙𝟐 𝒛 𝒊 − 𝟐𝒚𝟐 𝒛𝟐 𝒋 + 𝒙𝒚𝟐 𝒛𝒌. Find 𝛁. 𝑨 at point (1,-1,1).
Ans.
𝜕 2 𝜕 𝜕
∇. 𝐴 = (𝑥 𝑧 ) 𝑖 − (2𝑦 2 𝑧 2 )𝑗 + (𝑥𝑦 2 𝑧)𝑘
𝜕𝑥 𝜕𝑦 𝜕𝑧
∇. 𝐴 = 2𝑥𝑧 − 4𝑦𝑧 2 + 𝑥𝑦 2
At(1,-1,1),

∇. 𝐴 = 2(1)(1) − 4(−1)(12 ) + (1)(−12 )

∇. 𝐴 = 7
Q.6.b) A newtons rings setup is used with a source emitting two wavelength
λ1=6000A0 and λ2=4500 A0. It is found that nth dark ring due to 6000A0
coincides with (n+2)th dark ring due to 4500 A0. If the radius of curvature of the
lens is 90 cm, find the diameter of nth dark ring of 6000A0.

Ans.
Given:- λ1=6000A0

λ2=4500 A0

R=90 cm
(𝐷𝑛 )λ1 = (𝐷𝑛+2 )λ2

Formula:- 𝐷𝑛2 = 4𝑛𝑅λ

For nth dark ring λ1

(𝑫𝟐𝒏 )𝛌𝟏 = 𝟒𝒏𝑹𝛌𝟏------------(1)

And for (n+1)th dark ring λ2

(𝑫𝟐𝒏+𝟐 )𝛌𝟐 = 𝟒(𝒏 + 𝟐)𝑹𝛌𝟐---------------(2)

4𝑛𝑅λ1 = 4(𝑛 + 2)𝑅λ2

𝑛λ1 = (𝑛 + 2)λ2
2λ2
𝑛=
λ1 − λ2
2 × 4500
𝑛=
6000 − 4500
𝒏=𝟔
Using Equation 1, the diameter of 6th dark ring for λ1 is

𝐷62 = 4 × 6 × 90 × 6 × 10−5

𝐷6 = √4 × 6 × 90 × 6 × 10−5
𝑫𝟔 = 𝟎. 𝟑𝟔 𝒄𝒎
Q.6.c) Differentiate between spontaneous and stimulated emission.
Ans.

Sr. Spontaneous emission Stimulated emission

No.
1 The transition of an electron from the Stimulated emission of radiation is the
excited state to the ground state process whereby photons are used to
happens as a result of the natural generate other photons that have exact
tendency of the electron without the phase and wavelength as that of parent
action of any external agent. The photon.
radiation produced as a result of such
transitions is called as spontaneous
radiation.
2 This phenomenon is found in LEDs, This is the key process of formation of laser
Fluorescent tubes. beam.
3 Population inversion is achieved by
There is no population inversion of various ‘pumping’ techniques to get
electrons in LEDs. amplification giving the LASER its name
“Light amplification by stimulated
emission of radiation.”

4 No external stimuli required. Thus stimulated emission is caused by

external stimuli.