MS. R. S.

MORE
ME (COMPUTER)
Lecturer
)
Department of Information Technology
https://reenamorersm.wordpress.com/
Email: [email protected]
 Requirement Engineering
UNIT - II Requirement gathering &
analysis,
SOFTWARE REQUIREMENT ENGINEERING Types of requirement
 WHY STUDY SOFTWARE ENGINEERING?
• Many projects have failed because
– they started to develop without adequately
determining whether they are building what the
customer really wanted.
• Customer Requirement
TYPICAL PROJECT SCENARIO…
 REQUIREMENTS
• A Requirement is a capability or condition required
from the system.
• What is involved in RAS?
– Determine what is expected by the client from the
system. (Gather and Analyze)
– Document those in a form that is clear to the client
as well as to the development team members.
(Document)
 Activities in RAS
Requirements Gathering

Requirements Analysis

Requirements Specification

SRS Document
 REQUIREMENTS ENGINEERING
• The process of establishing the services that
– the customer requires from a system and
– the constraints under which it operates and is
developed.
• The requirements themselves are the descriptions of
– the system services and
– constraints that are generated during the
requirements engineering process.
 REQUIREMENTS ANALYSIS AND
SPECIFICATION
 Requirements Gathering:
 Fully understand the user requirements.
 Requirements Analysis:
 Remove inconsistencies, anomalies, etc. from
requirements.

 Requirements Specification:
 Document requirements properly in an SRS document.
 TYPES OF REQUIREMENTS
• Functional requirements
– Statements of services the system should provide,
how the system should react to particular inputs and
how the system should behave in particular
situations.
– May state what the system should not do.
• Non-functional requirements
– Constraints on the services or functions offered by
the system such as timing constraints, constraints on
the development process, standards, etc.
– Often apply to the system as a whole rather than
individual features or services.
 FUNCTIONAL REQUIREMENTS
• Descriptions of data to be entered into the system
• Descriptions of operations performed by each screen
• Descriptions of work-flows performed by the system
• Descriptions of system reports or other outputs
• Who can enter the data into the system?
• How the system meets applicable regulatory
requirements
 FUNCTIONAL REQUIREMENTS CONTD.
• The functional requirements discusses the
functionalities required from the system.
• The system is considered to perform a set of high-
level functions {fi }
• Each function f i of the system can be considered as a
transformation of a set of input data (Ii) to the
corresponding set of output data (Oi)
• The user can get some meaningful piece of work done
using a high-level function.

fi
O1
Input I1
Output
O2 Data
Data I2
I3 O3
 EXAMPLE FUNCTIONAL REQUIREMENTS - I
• Interface requirements
– Field 1 accepts numeric data entry.
– Field 2 only accepts dates before the current date.
– Screen 1 can print on-screen data to the printer.
• Business Requirements
– Data must be entered before a request can be approved.
– Clicking the Approve button moves the request to the
Approval Work flow
– All personnel using the system will be trained according to
internal SOP AA-101.
• Regulatory/Compliance Requirements
– The database will have a functional audit trail.
– The system will limit access to authorized users.
– The spreadsheet can secure data with electronic signatures.
 EXAMPLE FUNCTIONAL REQUIREMENTS - II
• Library system - F1: Search Book function
– Input: an author’s name
– Output: details of the author’s books and the location of
these books in the library
• ATM (Cash Withdraw)- R1: withdraw cash
– Description: The withdraw cash function determines the
type of account that the user has and the account
number from which the user wishes to withdraw cash.
– It checks the balance to determine whether the
requested amount is available in the account.
– If enough balance is available, it outputs the required
cash, otherwise it generates an error message.
 EXAMPLE FUNCTIONAL REQUIREMENTS - III
• ATM (Cash Withdraw)- R1: withdraw cash
– R1.1: select withdraw amount option
• Input: “withdraw amount” option,
• Output: user prompted to enter the account type
– R1.2: select account type
• Input: user option,
• Output: prompt to enter amount
– R1.3: get required amount
• Input: amount to be withdrawn in integer values greater than 100
and less than10,000 in multiples of 100.
• Output: The requested cash and printed transaction statement.
 NON-FUNCTIONAL REQUIREMENTS - I
• Characteristics of the system which can not be
expressed as functions
– Maintainability, Portability, Usability, Security, Safety,
Reliability, Performance, etc.
• Example: How fast can the system produce results?
– So that it does not overload another system to
which it supplies data, etc.
– Needs to be measurable (verifiability)
• e.g. response time should be less than 1sec, 90% of the time
 NON-FUNCTIONAL REQUIREMENTS - II
Non-
functional
Requirements

Product Organizational External

Requirements Requirements Requirements

Efficiency Reliability Portability Interoperability Ethical

Requirements Requirements Requirements Requirements Requirements

Usability
Requirements

Delivery Implementation Standards Legislative

Requirements Requirements Requirements Requirements

Performance Space Privacy Safety

Requirements Requirements Requirements Requirements
 NON-FUNCTIONAL REQUIREMENTS III
• Constraints are NFR
– Hardware to be used,
– Operating system
– DBMS to be used
– Capabilities of I/O devices
– Standards compliance
– Data representations by the interfaced system
• Project management issues (costs, time, schedule) are
often considered as non-functional requirements
• External Interface Requirements
– User Interface, Hardware Interface, Software Interface,
Communication Interface, File export format
 IMPORTANCE OF NONFUNCTIONAL REQ.
• Non-functional (product) requirements play an important
role for critical systems.
– Systems whose ‘failure’ causes significant economic,
physical or human damage to organizations or people.
• There are three principal types of critical system
– Business critical systems : Failure leads to significant
economic damage.
• customer accounting system in a bank
– Mission critical systems : Failure leads to the abortion of a
mission.
• navigational system for a spacecraft
– Safety critical systems: Failure endangers human life.
• a controller of a nuclear plant
 REQUIREMENTS FOR CRITICAL SYSTEMS - I
• The principal non-functional constraints which are
relevant to critical systems
– Reliability ‹
• the ability of a system to perform its required functions under stated
conditions for a specific period of time.
• Can be considered under two separate headings:
• Availability - is the system available for service when requested by
end-users.
• Failure rate - how often does the system fail to deliver the service as
expected by end-users.
– Performance
• Response requirements (how quickly the system reacts to a user
input)
• Throughput requirements (how much the system can accomplish
within a specified amount of time)
• Availability requirements (is the system available for service when
requested by end-users)
 REQUIREMENTS FOR CRITICAL SYSTEMS-II
• Security
– to ensure un authorised access to the system and its data is
not allowed ‹
– Ensure the integrity of the system from accidental or malicious
damage. ‹
• Safety ‹
– ‘shall not’ requirements which exclude unsafe situations from
the possible solution space of the system
• Usabilityis
– the ease with which a user can learn to operate, prepare
inputs for, and interpret outputs of system or component.
– Usability requirements include:
• Well-structured user manuals ‹
• Informative error messages ‹
• Help facilities ‹
• Well-formed graphical user interfaces
 EXAMPLES-I
• The System service X shall have an availability of 999/1000
or 99%.
– Reliability requirement which means that out of every
1000 requests for this service, 999 must be satisfied.
• System Y shall process a minimum of 8 transactions per
second.
– Performance requirement.
• The access permissions for system data may only be
changed by the system’s data administrator.
• All system data must be backed up every 24 hours and the
backup copies stored in a secure location which is not in
the same building as the system.
– Security requirements
 EXAMPLES-II
• The violated system shall not permit any further
operation unless the operator guard is in place.
• The system shall not operate if the external
temperature is below 4 degrees Celsius.
• The system should not longer operate in case of fire
(e.g. an elevator)
– Safety requirements
 SUMMARY - NFR
User’s need User’s concern Non-functional
requirement
Function 1. Ease of use 1. Usability
2. Unauthorised access 2. Security
3. Likelihood of failure 3. Reliability
Performance 1. Resource utilization 1.Efficiency
2.Performance verification 2.Verifiability
3.Ease of interfacing 3. Interoperability
Change 1.Ease of repair 1. Maintainability
2.Ease of change 2. Flexibility
3.Ease of transport 3. Portability
4.Ease of expanding or 4. Expandability
upgrading capacity or
performance ?
 MEASURABLE METRICS FOR NFR
Property Metric

Performance 1. Processed transactions per second

2. Response time to user input
Reliability 1. MTTF, MTTR, MTBF
2. Rate of occurrence of failure
Availability 1.Probability of failure on demand
Size 1.Kbytes, Mbytes
Usability 1.Time taken to learn the software
2.Number of errors made by user
Robustness 1.Time to restart the system after failure
 SOFTWARE EFFICIENCY
• It refers to the level of use of computational
resources, such as CPU cycles, memory, disk space,
buffers and communications channels.
• Efficiency can be characterized as follows:
– Capacity - maximum number of users/terminals/
transactions/... the system can handle without
performance degradation
– Degradation of service -- what happens when a
system with capacity X widgets per time-unit
receives X+1 widgets?
• We don't want the system to simply crash! Rather, we may want
to stipulate that the system should handle the load, perhaps with
degraded performance.
 NFR: TRIGGER QUESTIONS - I
• Performance characteristics
– Are there any speed, throughput, or response time
constraints on the system? ‹
– Are there size or capacity constraints on the data to
be processed by the system?
• Quality issues:
– What are the requirements for reliability? ‹‹
– What is the maximum time for restarting the system
after a failure? ‹
– What is the acceptable system downtime per 24-
hour period?
 NFR: TRIGGER QUESTIONS - II
• Resources and Management Issues:
– How often will the system be backed up?
– Who will be responsible for the back up?
– Who is responsible for system installation?
– Who will be responsible for system maintenance?
 DOMAIN REQUIREMENTS
• The system’s operational domain imposes
requirements on the system.
• Example:
– a train control system has to take into account the
braking characteristics in different weather
conditions.
• Domain requirements be new functional
requirements, constraints on existing requirements or
define specific computations.
• If domain requirements are not satisfied, the system
may be unworkable.
SOFTWARE REQUIREMENT SPECIFICATION
A software requirements specification (SRS) is a
document that describes what the software will do and
how it will be expected to perform. It also describes the
functionality the product needs to fulfill all stakeholders
(business, users) needs.
 NEED FOR SRS…
• Good SRS reduces development cost
– Req. errors are expensive to fix later
– Req. changes cost a lot (typically 40% changes)
– Good SRS can minimize changes and errors
– Substantial savings --- effort spent during req. saves
multiple times that effort
• An Example:
– Cost of fixing errors in req., design, coding,
acceptance testing and operation are 2, 5, 15, 50,
150 person-months
 USES OF SRS DOCUMENT
• Establishes the basis for agreement between the
customers and the suppliers
• Forms the starting point for development.
• Provide a basis for estimating costs and schedules.
• Provide a baseline for validation and verification.
• Facilitates transfer.
• Serves as a basis for enhancement.
• The SRS can serve as the basis for writing User Manual for
the software:
– User Manual: Describes the functionality from the
perspective of a user --- An important document for
users.
– Typically also describes how to carry out the required
tasks with examples.
QUALITY CHARACTERISTICS OF A
GOOD SRS
Following are the characteristics of a good SRS document:
1. Correctness:
2. Completeness:
3. Consistency
4. Unambiguousness:
5. Ranking for importance and stability:
6. Modifiability:
7. Verifiability:
8. Traceability:
9. Design Independence:
10. Understandable by the customer:
 IEEE 830-1998 STANDARD FOR SRS - I
• Title
• Table of Contents
• 1. Introduction
• 2. Overall Description
• 3. Specific Requirements
• 4.Change Management Process
• 5. Document Approval
• Appendices
• Index
 SRS DOCUMENT: STAKEHOLDERS
• SRS intended for a diverse audience:
– Customers and users for validation, contract, ...
– Systems (requirements) analysts
– Developers, programmers to implement the system
– Testers to check that the requirements have been
met
– Project Managers to measure and control the
project
• Different levels of detail and formality is needed for
each audience
• Different templates for requirements specifications:
– Often variations of IEEE 830
 IEEE 830-1998 STANDARD: INTRODUCTION
• 1.1 Purpose
– Describe purpose of this SRS
– Describe intended audience
• 1.2 Scope
– Identify the software product
– Enumerate what the system will and will not do
– Describe user classes and benefits for each
• 1.3 Definitions. Acronyms, and Abbreviations
– Define the vocabulary of the SRS (may reference appendix)
• 1.4 References
– List all referenced documents including sources
(e.g., Use Case Model and Problem Statement; Experts in the
field)
• 1.5 Overview
– Describe the content of the rest of the SRS
– Describe how the SRS is organized
 IEEE 830-1998 : OVERALL DESCRIPTION
• 2.1 Product Perspective
– Present the business case and operational concept of the system
– Describe how the proposed system fits into the business context
– Describe external interfaces: system, user, hardware, software,
communication
– Describe constraints: memory, operational, site adaptation
• 2.2 Product Functions
– Summarize the major functional capabilities
– Include the Use Case Diagram and supporting narrative
(identify actors and use cases)
– Include Data Flow Diagram if appropriate
• 2.3 User Characteristics
– Describe and justify technical skills and capabilities of each user
class
• 2.4 Constraints
– Describe other constraints that will limit developer’s options; e.g.,
regulatory policies; target platform, database, network software
and protocols, development standards requirements
• 2.5 Assumptions and Dependencies
 IEEE 830-1998 : OVERALL DESCRIPTION
• 2.1 Product Perspective
– Present the business case and operational concept of the system
– Describe how the proposed system fits into the business context
– Describe external interfaces: system, user, hardware, software,
communication
– Describe constraints: memory, operational, site adaptation
• 2.2 Product Functions
– Summarize the major functional capabilities
– Include the Use Case Diagram and supporting narrative
(identify actors and use cases)
– Include Data Flow Diagram if appropriate
• 2.3 User Characteristics
– Describe and justify technical skills and capabilities of each user
class
• 2.4 Constraints
– Describe other constraints that will limit developer’s options; e.g.,
regulatory policies; target platform, database, network software
and protocols, development standards requirements
• 2.5 Assumptions and Dependencies
 IEEE 830-1998 : SPECIFIC REQUIREMENTS
• 3.1 External Interfaces
– Detail all inputs and outputs
– Examples: GUI screens, file formats
• 3.2 Functional Requirements
– Include detailed specifications of all the functional
requirements
• 2.3 Non-Functional Requirements
– Describes all non-functional requirements that can’t
be expressed as a function.
• Characteristics of the system which can not be expressed as
functions.
• e.g. performance requirements, database requirements, design
constraints, quality attributes, . . .
REQUIREMENT ENGINEERING TASK
Inception
Elicitation
Elaboration
Negotiation
Validation
THANK YOU