TEG1050F Datasheet
TEG1050F Datasheet
TEG1050F Datasheet
www.tendacn.com
TEG1050F
48GE+2SFP Ethernet Switch
Products Description
Developed by Tenda, TEG1050F is a Gigabit unmanaged Ethernet switch designed for establishing wired
networks of high density and high speed in such scenarios as enterprises, parks, schools, and internet cafes,
providing a simple, easy, cost-effective, and rapid internet access solution for video surveillance and SMBs'
networking. With 48 10/100/1000 Mbps RJ45 ports, and 2 independent Gigabit SFP slots that can be paired
with Tenda's SFP modules, this switch can be used to deploy a long-distance network up to 20 km. Its
full-duplex transmission rate can reach 2000 Mbps, ensuring the timely transmission of large files and
smoothness of videos. Its one-key VLAN function can isolate broadcast storms. Its integrated professional
lightning protection circuit offers 6 kV lightning protection for the built-in power supply and all Ethernet ports,
ensuring the stability and reliability of the switch. The switch supports desktop mounting, rack mounting and
wall mounting, and features a 1U 19-inch standard rack-mount shell design and plug & play function. With
these advantages, it is an ideal choice for deploying a cost-effective and high-speed network.
Product Features
12 Mb Large Buffer
With 12 Mb large buffer, the switch can meet the needs of such network applications with
burst traffic as search engine, IPTV, and P2P downloads, ensuring no packet loss, timely
transmission of large files, and smoothness of videos.
6 kV Lightning Protection
This switch provides 6 kV lightning protection for both Ethernet ports and the power supply,
and supports over-temperature, over-voltage and surge current protection.
One-key VLAN
Under the VLAN mode, ports 1 to 46 cannot communicate with each other, but can
communicate with uplink ports 47 to 50, isolating broadcast storms and enhancing network
security.
Ease of Use
The switch features a 1U 19-inch standard rack-mount shell design and can be easily
installed on a 19-inch rack using the included L-shaped brackets. With plug & play function,
it needs no professional settings and can be used for networking directly, greatly reducing
the maintenance cost.
TEG1050F
Servers
1000 Base-T
Product Information
Network standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z
Fan Fanless
Buffer 12 Mb
Software features
Protocol CDMA/CD
Specifications are subject to change without notice.Copyright ©2020 SHENZHEN TENDA TECHNOLOGY CO.,LTD. All rights reserved. Tenda is the trademark of SHENZHEN TENDA TECHNOLOGY CO.,LTD.
All other brand names mentioned herein are the trademark or registered trademarks of their respective holders.