ADVASTOP PVC WS JN

PVC Joint Sealing Profiles

DESCRIPTION
ADVASTOP PVC WS JN is a flexible waterstop profiles extruded from high grade of Polyvinyl Chloride
(PVC) serve to isolate from dampness, moisture and water under pressure and without deformation
and technological joints of concreting, in reinforced concrete structures, underground and buried
structures under the influence of surface groundwater or sewage.

USES
It used to seal construction and expansion joints in water retaining structures which subjected to
hydrostatic pressure such as reservoirs, water towers, dams, canals, swimming pools, sewage tanks
etc.

To keep water out of concrete structures such as basements, underground car parks, tunnels,
subways, retaining walls etc.

ADVANTAGES
Environmentally friendly – lead-free formulation.

High quality compounded PVC for long durability and integrity.

Ability to withstand high hydrostatic head pressure.

AL SA’FAT - GREEN BUILDING
Certificate No. CL20020739
Full range of factory made intersection pieces.

Easy to weld on-site.

Reinforced eyeleted edge flanges for positive fixing.

Good chemical resistance.

Can be used in hot and cold climates.

Suitable for use in contact with potable water.

Many different sizes, types, color, and fabricated intersections are available on request.

TEST STANDARDS/APPROVALS
ADVASTOP PVC WS JN have been tested in accordance with: BS 2782, ASTM D2240, DIN18541, ISO527
and GOST 11262-80.

PRODUCT DATA
Form and Color: Extruded PVC preformed profiles, in Blue, Yellow, and Black Color
Packaging: 15, 20, 25 LM Rolls

TECHNICAL PROPERTIES
All ADVASTOP PVC Waterstops are specially formulated and manufactured to meet or exceed the
industry’s standard specifications.

DESIGNATION PROCEDURE VALUE

Tensile Strength DIN 53455, BS 2782 Part 3 – 1976 Method 320 A >10*N/mm²
Elongation at Break DIN 53455, BS 2782 Part 3 – 1976 Method 320 A >250%
Shore A Hardness DIN 53505, ASTM D2240 80 ± 2
Stabilization * Lead Free
Water Absorption ASTM 570 0.06%
Al Mutathawir Insulation Materials Industries L.L.C.
Specific Gravity ASTM D 792 1.54 ± 0.02
T: +971 6 5345585 | F: +971 6 5347717
E: [email protected] | W: www.aim-insu.com * All values given are subject to 5-10% tolerance.
P.O. Box: 22704,Sharjah-UAE
 ADVASTOP PVC WS JN

TYPES

NORMAL
WIDTH ROLL
USES THICKNESS
TYPE CM LENGTH
mm
LM
(±10%)

ICJ – 150 N 15 15,20,25 4

Construction

Centrally Placed Waterstop

ICJ – 200 N 20 15,20,25 4
Joints

ICJ – 250 N 25 15,20,25 4

ICJ – 330 N 33 15,20,25 6
IEJ – 150 N 15 15,20,25 4
Expansion

IEJ – 200 N 20 15,20,25 4

Joints

IEJ – 250 N 25 15,20,25 4

IEJ – 330 N 33 15,20,25 6
ECJ – 150 N 15 15,20,25 4
Construction

Externally Placed Waterstop

ECJ – 200 N 20 15,20,25 4
Joints

ECJ – 250 N 25 15,20,25 4

ECJ – 330 N 33 15,20,25 4
EEJ – 150 N 15 15,20,25 4
Expansion

EEJ – 200 N 20 15,20,25 4

Joints

EEJ – 250 N 25 15,20,25 4

EEJ – 330 N 33 15,20,25 4

STORAGE
Storage Conditions: Store the material in a cool and shaded area, protect from UV and high temperatures. Prolonged exposure to sunlight and harsh
environment will result in deterioration of the product. Keep away from sharp edges to prevent damage.

Shelf Life: 36 months from date of production if stored properly in undamaged and unopened original sealed packaging.

HEALTH & SAFETY

Hot weld site joining of PVC Waterstops results in the liberation of hydrogen chloride mist and vapor. The OEL (Operational Exposure Limit) of 5ppm
can be exceeded in still air conditioned spaces, therefore forced ventilation must be provided or a suitable respirator used.

The information given in this datasheet is based on both current

development work and many years of field experience. Whilst every
effort is made to ensure that the information is reliable, we cannot Al Mutathawir Insulation Materials Industries L.L.C.
accept responsibility for any work carried out with our materials as T: +971 6 5345585 | F: +971 6 5347717
E: [email protected] | W: www.aim-insu.com
we have no control over methods of application, site, conditions, etc. P.O. Box: 22704,Sharjah-UAE