Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    Set 8

    Uploaded by

    sivashanmugam
    This document contains 5 questions regarding technical drawings and geometry problems. Question 1 asks to draw the path traced by a thread unwinding from a circle or draw front and top views of an object. Question 2 involves calculating true lengths and inclinations of a line or drawing top and front views of a pentagon. Question 3 involves drawing projections of hexagonal prisms or cones. Question 4 involves drawing sections of cylinders or hexagonal pyramids. Question 5 involves drawing isometric views of truncated pyramids or perspective views of rectangular pyramids.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Set 8

    Uploaded by

    sivashanmugam
    27 views1 page
    This document contains 5 questions regarding technical drawings and geometry problems. Question 1 asks to draw the path traced by a thread unwinding from a circle or draw front and top views of an object. Question 2 involves calculating true lengths and inclinations of a line or drawing top and front views of a pentagon. Question 3 involves drawing projections of hexagonal prisms or cones. Question 4 involves drawing sections of cylinders or hexagonal pyramids. Question 5 involves drawing isometric views of truncated pyramids or perspective views of rectangular pyramids.

    Original Description:

    EG

    Original Title

    set-8

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 5 questions regarding technical drawings and geometry problems. Question 1 asks to draw the path traced by a thread unwinding from a circle or draw front and top views of an object. Question 2 involves calculating true lengths and inclinations of a line or drawing top and front views of a pentagon. Question 3 involves drawing projections of hexagonal prisms or cones. Question 4 involves drawing sections of cylinders or hexagonal pyramids. Question 5 involves drawing isometric views of truncated pyramids or perspective views of rectangular pyramids.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    27 views1 page

    Set 8

    Uploaded by

    sivashanmugam
    This document contains 5 questions regarding technical drawings and geometry problems. Question 1 asks to draw the path traced by a thread unwinding from a circle or draw front and top views of an object. Question 2 involves calculating true lengths and inclinations of a line or drawing top and front views of a pentagon. Question 3 involves drawing projections of hexagonal prisms or cones. Question 4 involves drawing sections of cylinders or hexagonal pyramids. Question 5 involves drawing isometric views of truncated pyramids or perspective views of rectangular pyramids.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    End semester Practical Examination - January 2023

    GE23131 - Engineering Graphics (SET – 8)


    Answer ALL the following. 20 x 5 = 100 Marks
    1. (a) Draw a path traced out by an end of a piece of thread when unwound to a length of 150 mm from a circle of
    40 mm diameter, the thread being kept tight when it is being unwound. Name the curve traced.
    (or)
    (b) Draw the front and top views of the following.

    2. (a) A straight line AB has its end A, 20mm above HP and 25mm In front of VP. The other end B is 60mm above
    HP and 65mm in front of VP. The distance between ends of the projectors is 60mm. find the true length and true
    inclinations of the line with HP and VP. Also mark traces.
    (or)
    (b) A pentagon of side 30 mm rests on the ground on one of its comers with the sides containing the comer being
    equally inclined to the ground. The side opposite to the comer on which it rests is inclined at 30° to the VP and
    is parallel to the HP. The surface of the pentagon makes 50° with the ground. Draw the top and front views of
    the pentagon.
    3. (a) Draw the projection of a hexagonal prism whose one rectangular face size is 25mm x65mm resting on HP on
    one of its base corners such that the other extreme corner is 30mm above HP with the axis parallel to VP.
    (or)
    (b) A cone of diameter 40mm and height 60mm is freely suspended from one of its base points such that the axis
    parallel to VP. Draw the projection.
    4. (a) A cylinder of base diameter 50 mm and height 60 mm rests on its base on HP. It is cut by a plane perpendicular
    to VP and inclined at 45° to HP. The cutting plane meets the axis at a distance 15 mm from top to the base. Draw
    the sectional plan and true shape of section.
    (or)
    (b) A hexagonal pyramid of base side 25mm and axis 70mm long has the hexagonal end on HP, with two edges
    perpendicular to VP. A section plane perpendicular to VP and inclined at 30°to HP cuts the pyramid at a point
    25mm from the apex. Draw the sectional top view. Also find true shape of the section.
    5. (a) A pentagonal pyramid, 30mm edge of base and 65mm height stands on HP such that an edge of the base is
    parallel to VP and nearer to it. A section plane perpendicular to VP and inclined at 30° to HP cuts the pyramid
    passing through a point on the axis at a height of 35 mm from the base. Draw the isometric view of the truncated
    pyramid. Showing the cut surface.
    (or)
    (b) A rectangular pyramid, base 30 mm x 20 mm and axis 35 mm long, is placed on the ground plane on its base,
    with the longer edge of the base parallel to and 30 mm behind the picture plane. plane is30mm to the left of the
    apex and station point is 50 mm in front of the picture plane and 25 mm above the ground plane. Draw the
    perspective view of the pyramid.

    You might also like