Conventional Sounder Beacon C9091T
Conventional Sounder Beacon C9091T
C9091T
Features
LPCB and CPR approval;
Comply with EN54-3 and EN54-23;
Designed with an upper cover and a lower cover and
installed on a detector base, it can be installed, com-
missioned and maintained conveniently.
Description
C9091T Conventional Sounder Beacon can give audible and visual alarms after being
connected to a DC24V power supply. It can be used with a bus-type fire alarm control
panel through an output module. After receiving a start command given by the fire alarm
control panel following an accident, the output module will start the Sounder Beacon.
After that, the Sounder Beacon will give a dazzling visual alarm signal and a harsh audi-
ble alarm signal to remind the persons on the scene of the accident of the fact that a fire
has occurred on the site quickly and the necessity to take related evacuation measures,
thus preventing the fire accident from becoming a major one.
PRODUCT DATESHEET-C9091T
The Sounder Beacon may be used to give audible alarms and visual alarms at the scenes
of accidents.It is applicable to places like high-rise residential buildings, public places,
hotels, amusement buildings,factories, shopping centers, hospitals, schools, office
buildings and stock exchanges, and particularly to the places with a low visibility or the
possibility of generation of smoke.
C9091T
Flash Color and Frequency White, 0.5Hz
Light Output Synchronization Meets EN54-23
Sound Level See the following table”Sound Level Data”
Ingress Protection Rating IP21C
Operating Temperature -10℃ ~ +55℃
Relative Humidity ≤95%, non condensing
Material of Lens/Body Flame retardant PC/ABS
Dimension ф100mm×100.5mm( with the base)
Mounting 45mm ~ 70mm
Hole Spacing
Weight About 266g (with the base)
C-3-8 W-2.4-6
X Z V(m3) X Y Z V(m3)
8m 3m 150.8 6m 6m 2.4m 86.4
Fig. 1 Ceiling mount coverage volume Fig. 2 Wall mount coverage volume
Tone1:[email protected],Max Volume,dB(A)@1m
PRODUCT DATESHEET-C9091T