Scribd Logo
Upload

Welcome to Scribd!

  • 7 views

    F1 - 3GACC Datasheet

    Uploaded by

    Luis Cadena
    The document provides details about product F1-3GACC, which is a device for vehicle tracking and monitoring. It has features like a 3G modem, GPS, accelerometer, backup battery, and interfaces to connect to the vehicle like CAN bus, ignition, and immobilizer. The document includes sections on features, physical properties, hardware description, interfaces with the vehicle, and power consumption.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    F1 - 3GACC Datasheet

    Uploaded by

    Luis Cadena
    7 views3 pages
    The document provides details about product F1-3GACC, which is a device for vehicle tracking and monitoring. It has features like a 3G modem, GPS, accelerometer, backup battery, and interfaces to connect to the vehicle like CAN bus, ignition, and immobilizer. The document includes sections on features, physical properties, hardware description, interfaces with the vehicle, and power consumption.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides details about product F1-3GACC, which is a device for vehicle tracking and monitoring. It has features like a 3G modem, GPS, accelerometer, backup battery, and interfaces to connect to the vehicle like CAN bus, ignition, and immobilizer. The document includes sections on features, physical properties, hardware description, interfaces with the vehicle, and power consumption.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    7 views3 pages

    F1 - 3GACC Datasheet

    Uploaded by

    Luis Cadena
    The document provides details about product F1-3GACC, which is a device for vehicle tracking and monitoring. It has features like a 3G modem, GPS, accelerometer, backup battery, and interfaces to connect to the vehicle like CAN bus, ignition, and immobilizer. The document includes sections on features, physical properties, hardware description, interfaces with the vehicle, and power consumption.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Product Data sheet

    F1 – 3GACC

    1. Main Features
    • Weight: 160 gr.
    • Modem module for 3G
    communication

    • GPS module
    3. General System elements

    • 64MB SPI Flash memory


    Element Description
    • Operating voltage: 7 - 35 VDC CPU STM32F4 family CPU
    • On-board functions include Flash memory 64MB SPI Flash
    immobilizer, accelerometer, CAN
    bus compatibility, multiple digital and Accelerometer An internal 3 axis accelerometer
    analog inputs, driver and charge detects when the vehicle starts
    identification logic, and stops movement or changes
    direction.
    • 2000 mAh, 3.7V LI-Polymer backup
    battery with energy modes control Digital Inputs - 1 for Ignition signal
    (3) - 5 general purpose digital
    • Supports encrypted remote firmware inputs
    update (Over the air – OTA update).
    Analog Inputs 2 General purpose analog input
    • Alerts provided for start/end trip,
    over speed, idle, harsh Digital Outputs 3 Multi-purpose
    acceleration/deceleration, accident, Immobilizer Internal immobilizer circuit - relay
    fuel events, main and backup battery
    events, tracking, etc. GPS/GLONASS Internal GPS module with
    optional GLONASS support
    • Fully integrated with WorldFleetLog (Russia) with antenna
    to generate hundreds of reports.
    GSM/GPRS Internal modem with option for
    • Status indication LEDs. 2G GSM/GPRS cellular
    communications with SIM card
    holder and antenna
    2. Physical Properties LED 1 Green LED
    1 Red
    • Casing: ABS plastic box

    • Case dimensions: 101 x 58 x 32 mm


    (without cable and brace)

    Page 1
    Product Data sheet

    4. Main Hardware description External analog input General purpose


    analog input used for
    sensing analog signals
    Hardware Feature Notes (i.e. fuel or RPM
    GPS 3 GNSS (GPS, Galileo, sensors)
    GLONASS, BeiDou)
    Digital Outputs General purpose digital
    3G Modem HSPA 5-band, GSM – 5V output can be used
    800 MHz, 850 MHz, to lock/unlock doors,
    900 MHz, 1900 MHz, active horn, ietc.
    2100 MHz; with
    automatic fallback to CAN transceiver High speed transceiver
    2G 850 MHz, 900 MHz, compliant to ISO
    1800 MHz, 1900 MHz 11898-2:2016 and SAE
    J2284-1 to SAE J2284-
    RS-232 channel x 2 - Internal port: used for 5
    device configuration
    and debug during Dallas interface Communication to
    development and external reader for
    production not available driver/charge
    after MB is inside the identification
    case Indications Two integrated LEDs
    - External port: RS-232-
    communication used for
    device configuration
    and debugging. 5. Interfaces with vehicle
    Accelerometer Each accelerometer
    based alert (accident,
    acceleration, turns,
    Interface Notes
    etc.) is governed by a
    currently updated Digital Input Ignition signal and 2
    algorithm in the general purpose inputs
    firmware.
    Digital Output 2 Multi-purpose
    Internal analog inputs Supports three internal
    Main Battery 12V signal
    analog inputs for
    monitoring: GND Main battery GND signal
    Backup battery Immobilizer Connected to mobilization
    Main vehicle battery module of vehicle.
    Temperature of the F1 CAN Connected to CAN port
    unit on vehicle.
    DALLAS Driver and charge
    identification device
    installed on vehicle

    Page 2
    Product Data sheet

    6. Power consumption

    Power Mode Value


    Standby 3 mA
    Sleep 0.5 mA
    Sleep Transportation with 12 v 300 µA

    Page 3

    You might also like