ßéo~ß×

Supplier of Moonstar
Branded GI

產品目錄
PRODUCT
CATALOGUE2023~_z
þ— Content
}û}Ï Company Introduction 02 wõwÕ Innovative Products
òýNýŸoÛ Fabrication Service 03 }¶õû¶Ï¶}š¸ûÓ_| 28
Anti-viral, Anti-microbe, Anti-dust Waterborne
Ü{ß× Galvanized Steel Sheet 04
Nano Coating For Air Ducting
wÕÿïÛË Traceability and Quality Control 05
}ûÝ_ Supporting Services 06
kZ|_˜ý Modular Offsite Prefabrication 29-30
¶½÷÷g¶ÿÿ 07-08
Flexible Rockfall Barriers Solution
ûw Hollow Sections & Tubes
Ü{ýò×Û Wo Lee Green Solutions 09
ñrß}ëýßþû 31
Ü{wþoß 10
Hot Finished Structural Square Hollow Sections
Wo Lee Build Tech Center
ñrß}ëÿßþû 32
òýwÕ Fabricated Products Hot Finished Structural Rectangular Hollow Sections
ß×îoW 11 ñrß}ëWßþû 33
Corrugated Zinc Coated Steel Sheets Hot Finished Structural Circular Hollow Sections
ýW Colour Cladding 11 WþÝû 34-35
Round Steel Tubes
þÿ Steel Wire Meshes 12
w Plates
ßþ Sections
ñÏþ Hot Rolled Steel Plates 36
ý_þ Universal Beams 13-14
³þµ Steel Chequered Plates 37
ý_þÿ{šĀUniversal Columns 15
ñß×þw 37-38
ý_þk Universal Bearing Piles 16
Continuously Hot-Dip Zinc Coated Steel Sheets
ý_þÿóĀH Beams 17-19
ÿß×þw 38
ý_þÿýóĀTapered Flange 19-20 Electrolytic Zinc - Coated Steel Sheets
ýþÿýóĀChannels (Tapered Flange) 21-23 øþ 39
Abrasion Resistant Steel Plates
ýþÿýóĀChannels (Parallel Flange) 23
}þ÷v\¶{ DURASTEEL® 40
Ûþÿ{šĀEqual Angles 24
Supalux }ù³ Supalux - Intumex 41
ÛþÿO{šĀUnequal Angles 25
ýþ Square Bars 25 Ów Aluminium Products
cþ Flat Bars 26 Ów Aluminium Plates 42
ÚëÛ¿þ Deformed Bars 26 Óßw Aluminium Sections 42-43
Wþ Round Bars 26
þw| Steel Specifications
þk Sheet Piles 27
o_{þ Chinese Standard (Gou Biu) 44-47
Ÿß÷_þk Light Sheet Piles 27
{ÿ{þ European Standard 48-51

wW Location Map ]ß
 Company
}û}Ï Introduction
ÝýsQ
Ü{þµoÖ}û}û™oÞ}S~ÿõÛýú™oþûmóß{îþw2ß~ÿÜ{}~
][SWmÛÿnó][—V}ûÿú™o1sSïó^}Twóßòý1¯Š1þ°1üê
ïóÛywÕoÛ2

WHO WE ARE
With a history of over 60 years, Wo Lee has been providing high quality steel to the Hong Kong
construction industry. In recent years, we have expanded to include a number of companies that
focuses on fabrication, design and build, consultation services, safety products to serve Hong Kong,
the Greater Bay Area and worldwide.

mÛÿ_
þwßéÛòýoÛ: Ü{ßéT_TkþwwÕÏÛß×1þw1þ1ý_þ / ý_þ({š)1ýþ1Ûþ1
ýþ1WþÛcþ2Ü{îóßþwòýoÛïÿ¿ûv—n2

wõþwwÕ: Ü{óßüê1¯ŠÛþ°oÛÿsQýÿïÛýw_¯oòýÛ{mݑoßÿóßN
ýŸòýoÛ2Ü{óßwõoÛýhÿWîkZþû1¿³çòý1¶k½÷ÿïÛ÷϶}}_|2

OUR BUSINESS ACTIVITIES

Steel and Fabrication services: Wo Lee provides a wide variety of steel products such as Galvanized Steel Sheets, Steel Coils,
Steel Sheets, Universal Beams / Columns, Channels, Hollow Sections, Angles, Squares, Round and Flat bars. We also provide
fabrication services to meet customer requirements.

Innovative Construction Solutions: Wo Lee provides consultation, design and build services. Our Ping Che and Mainland
warehouse are able to provide one-stop shop solutions. We have focused our services to providing innovative products and
services such as: modular offsite solutions, bolt & nut fabrication, flexible barrier nets for landslip mitigation, anti-dust & anti
bacterial coatings.
òýoÛ Fabrication Service

òýNýŸoÛ Fabrication Service

Ü{þµoÖ}ûößéT_TÞ_þw_ÿöéÛÿ¯wýòýݑoÛÿÛný÷
ßÿ¿ûv—n2Ü{þµoÖ}ûý90~ïÿӇISO9001ÕîûvŠÓÿrߏËÿ_
Wî¬Õ[·ÛòýݑoÛ2

Wo Lee Steel Company Ltd. is proud to be accredited with ISO9001 certificate for stockholding, fabrication and
sales of steel. Wo Lee Steel Company Ltd. has been a major supplier of steel products since 1954 and has a
diversified steel processing centre to address clients9needs and custom specifications.

ÿç}çýÞ
CNC Drill

}OŸ¯çv{_Û_ÿóßþúÿŸ
Ûý_ýß2úk½ÿ}ëß\
}¯Ù2

Computer numerical control specialized for

Capping Plates and Base Plates.

øþ{ç
Robotic Welding Machine

}øWöÿý{ýwÏ÷Ì{çÜ
×vöþ{ýß, ÿÿ{çÞ{ë×W2

Use of mechanized programmable tools to

automate the welding process by performing both
the weld and handling of the parts.

ïY÷WrÚß÷çvÿ}
High Precison Laser Cutter

þþþ1ßgÚÿþÿó}WrŸþÿÿ
ÿWr[~Ñ|Ûßµ1Oÿþ1Ó{
Û×vÞö÷WhÿWrrÕßrÛß
uþöÚ2

The high precision laser cutter can process a variety

of complex patterns and cut various metals such as
black iron plate, stainless steel, aluminum plate and
other metals.

wÞòý~
Other Machineries
}ç“Þ û×~ú }çýÛúÞ
CNC Milling Machines Band Saw NC Press Brake

P.3
 Ü{ß× Galvanized Steel Sheet
Ü{ß×
Galvanized Steel Sheet
Ü{þµoÖ}ûú™o^|óßo~ß׍ÞßS~ÿÿf
o~ß×þouåoýµýåow2åoýµ]îßçvß~ö|ÿnóßTÞß
þwÿÏÛ1Û1ý1O»þ{2bowÕýåoý°ÿoöwÿ}ÿïWö
âÛÿnšÞÎISO 9001ÜISO 14001Ë2

Wo Lee Steel Co.Ltd has been supplying Moonstar Branded GI in the Hong Kong market for over 40 years.
Moonstar Branded GI is produced by Nippon Steel in Japan. Nippon steel has very strict quality control and a
wide array of products such as plates, sheets, bars, channels, stainless, etc. All product are made in Japan, plants
producing Moonstar are using advance technologies and are ISO 9001 and ISO 14001 certified.

þӃ Project Reference

ÿ_röoß
Xiqu Centre
~ÿÿ2016~
ûvÿÿ_çWSûv\
ßéwýÿo~ñ}ß×þw
}ßÿ200~

Year : 2016
Client : West Kowloon Cultural District Authority
Supplied items : MoonStar GI Coil
Quantity : 200MT

The Henderson
~ÿÿ2021~
ûvÿÚ×ÿý{oÖ}û
ßéwýÿo~ñ}ß×þw
}ßÿ440~
Year : 2021
Client : Krueger Engineering Limited
Supplied items : MoonStar GI Coil
Quantity : 440MT

ß}}ï
Fu Shan Public Mortuary
~ÿÿ2021~
ûvÿÛjý{oÖ}û
ßéwýÿo~ñ}ß×þw
}ßÿ110~
Year : 2021
Client : ATAL Engineering Ltd.
Supplied items : MoonStar GI Coil
Quantity : 110MT
P.4
wÕÿïÛË Traceability and Quality Control

wÕÿïÛË Traceability and Quality Control

úÎúßþwwÕ\Õî‰nÿÜ{]ýþwwÕvÛÎÿ}göwÕÛwÛÿï{ßÿ
n}üWYÿûvÿ}ÿomóWÿïm÷ÛúßwÕî}2

To meet the ever escalating demand for high quality steel, Wo Lee has implemented a comprehensive Product
Traceability and Digital Warehouse Management System; significantly improving the effectiveness of steel
product identification and quality control.

}üWYÿûvÿ}
Digital Warehouse Management System

sQ}Y²ö}üWYÿûvÿ}ÿnŸÞm×í_ã÷~ã÷{|N
öQR CODEÿîwÕöÏýÿWîwÕýß1ãüýß1 rß1]{1w
î1wwïÛîßËþ2

o}ûYÿs`1òý{ßW×ö|÷çÿŒo}ûöîßûvÞÿ
ISO9001:2015 ÿ_ù}ýòý1Y`oÛ2ÝòN¬ÕrYßs²Ì{|
×vÿn`sr30[[wo÷çßýöþw`¬Swÿ}üWûvÛ÷ç
ÿ}omóWÿïm÷2

With our advance Digital Warehouse Management System, product information such as:
purchase number, heat number, name, steel grade and origin can be tracked by simply
scanning the QR code printed on each material label.

We established strict quality procedures under the ISO 9001:2015 Quality Management
System scope which are applicable to fabrication, stockholding, and warehousing. Steel
products are stored systemically into 30 separate zones in our warehouse which are
monitored and labeled for effective tracing.

͔֍
Quality Control

Ü{þµoÖ}ûýòýÛݑûvoßw¯ûþwnîoßÿ²ÌÝî
nîÜënîÿ÷_îoßýþõênß×wÕÿúßwÕîß2

Wo Lee Steel Co. Ltd established a steel testing laboratory in Wo Lee Fabricaton and
Distribution Centre to conduct impact test and tensile test. Competent QC technicians also
conduct Zinc coating measurement on galvanized products for quality control purpose.

YÿîßûvÞÿÜôÛûvÞÿ
Quality Management System & Environment Management System

Ü{×ß ISO9001:2015 îßûvÞÿËþÜ ISO14001:2015 ôÛûvÞÿËþÿù}

ÿ_WîòýÛY`oÛ2

Wo Lee Steel Co. Ltd is accredited with an ISO9001:2015 and ISO14001:2015 certificate with the scope
of stockholding and fabrication.

P.5
 }ûÝ_ Supporting Services
}ûÝ_ Supporting Services

{wvO
Superior Geographical Location

Ü{òýÛݑûvoßú™ogöþµòýÛs[oßÿ_wÞ40
¬ý^ÿÝÙY²òý¯Ù2

Œ^wvOýÿÿOýýÿÿ±ßõ}ôÿ}ïóýÿ}ïÿÿß
îXóüÛý½Û2ý•Íwî¯o¬Y2

Wo Lee Fabrication and Distribution Centre is the largest steel storage centre in Hong
Kong, having the area of 400,000 square ft with advanced fabrication facilities.

Located in Ping Che Fanling, near New Territories Circular Road, Fanling Highway,
Liantang Control Point and Sha Tau Kok; Wo Lee Fabrication and Distribution Centre has
an advantageous geographical location for cross-border transportation. There is also a
warehouse of Wo Lee in Lam Tei, Tuen Mun.

ßÛÿ}
Monitoring System

ŸÞ24_f÷çÿ}sf÷ç[Ô40¬ý^s[z—ÿûvîÿŸÞg
Ûÿûsf÷߬Õòí2

ßÛÿ}24_fš—YÿöåíÿWîÿ_Ûÿws[Yÿߟߚ—ÿ
ÿïþwöϬ1òý1s[Ûû¬åíÿomߞûvö¬{2

Steel products are stored in our 400,000 square ft. storage area and customers can
monitor their stock via the internet in real time 24 hours. Having the 24 hours monitoring
systems means we can trace all records of steel product delivery, fabrication and storage,
thereby protecting customers ordered products.

|šÝ_
Centre Facilities

Ü{òýÛݑo߯ûÿws[Yÿn¯oï}öfïÛÿþçvÿ}ÿ
úßs[ôÛßc{ÛöïþÛÿþ2÷_î¯Ï׏ÿwýÿgýÝ
ßÔ50,000 kg2

Wo Lee Fabrication and Distribution Centre has indoor storage area equipped with
temperature and humidity monitoring system to ensure the consistancy of storage
environment. We are also equipped with weighbridge which can measure up to 50,000 kg.

Ï׏ÿýß Marine Department Registraton NoÿWBP087

P.6
¶½÷÷g¶ÿÿ Flexible Rockfall Barriers Solution

¶½÷÷g¶ÿÿ
Wolee RXI-200 & Wolee RXI-300
Wolee RXI-200 & Wolee RXI-300 ÷g¶ÿÿóß]½÷ëw}ûößÿÿý÷ÿÚÔ 3000 kJ
öÝî2o¶ÿÿÿéûv‰ný_ÿýþ²Ì˜ýÝۑrýwÿÿ]ÛÝýßÛ
ro2bo¶ÿÿÛþÝ}þW\{{þETAG-272wÕ]{RXIÏëo_{þ
TB/T 3089-20042

wÕ{Þ
Product Features
Þß}_ Small Profile

¶ÿÿ}Þß}_ÿ÷ß]÷þþö—‰ÿöo_}]ö÷ÿ—
‰]öýwÿ|z—2ögW¯Šw—Ýö‰nOÝöÛ2

The barrier system has a small profile from minimizing the need of
long cables. It takes up less area and requires less site area. The
discrete design makes it unnoticeable from a distance.

˜ý}ë Pre-Assembled

þ÷ܶÿÿýÿïýþ²Ì˜ýÿ}~ÿwöb—ýýf—2

Installation time is reduced due to pre-fabrication of posts and

pre-installed bundles of nettings, reducing construction time on site.
¶Ñgý Corrosion Protection

sQöwÕ}Úß×þÜÚ{þÿï]Þöýÿro2

Our product uses galvanized steel and high grade wire which reduces
overall maintenance cost.
}gý Economical Savings

÷g¶ÿÿöroOýó}ö[gÿoÿöúÛoŸßÿ}ÿOÿï÷
÷Úýß|ö½÷2

The cost of flexible barrier system is lower than traditional rigid

barrier as it is light system but can resist high energy level of falling
rock.
\mÛv Customization

sQö\m_žÿïöwvßÿyþûvö‰n¯Šgýh2öÎ
2000 kJ Ü 3000 kJ ï_ÿsQÿïšÞÿçkìÛÿÿ¯ŠwÞýß
w2

Our professional team can design customized fall protection barriers

to fit all customer requirements. We can design in other energy levels
apart from 2000 kJ and 3000 kJ by computerized simulation.
P.7
 ¶½÷÷g¶ÿÿ Flexible Rockfall Barriers Solution
Flexible Rockfall Barriers Solution
Wolee RXI-200 & Wolee RXI-300
A Wolee RXI-200 & Wolee RXI-300 barrier can provide protection against rockfalls and debris flow with
impact energy up to 3000kJ. The fall protection barriers are made to customer specifications, and are
pre-fabricated and delivered to the construction site for quick installation and cost effectiveness. All barriers
meet the European standards of ETAG-27. The RXI portion of model name of Wolee-RXI 200 & Wolee RXI-300
refers to TB/T 3089-2004 (Chinese Code).

âÛ}þ
Wolee RXI Technical Data
Specification Wolee RXI-200 Wolee RXI-300

Energy Classification 5 (2000 kJ) 6 (3000 kJ)

Category Class A A

Nominal Barrier Height 4.5-6.5m 5.2-7.5m

Post Type HW200x200 HW250x250x9x14

or equivalent or equivalent
Post Spacing 8-12m 8-12m

Net Type Wire Ring Net Wire Ring Net

Net Wire Diameter 3 mm 3 mm

Windings 3 x 16 3 x 19

Ring Diameter 300 / 350mm 300 / 350mm

Corrosion Protection Zn or Zn / Al Zn or Zn / Al

Rope Diameter 22mm 18mm & 22mm

Upslope Ropes Y Y

Brake Element 8002 8002

Brake Distance 8.43m 9.02m

(Max. elongation)

Max. Lateral Anchor Load 190 kN 165 kN

Max. Upslope Anchor 185 kN 215 kN

sQön
Load
Take a look at our full scale test video
P.8
Ü{ýò×Û Wo Lee Green Solutions
Ü{ýò×Û
Wo Lee Green Solutions
Ü{ýò×ÛoÖ}ûrûý2015~ÿÜ{ýò×ÛoÖ}ûõÛÿ¿þûm]˜ýkZþûö
—nÿïÛ|~ýòþû{ý‡wÕÿnóWþwöÿÿïgÜþý~ý}ÿŒ^òuþ}ëþ
¯Š1 w1ý_{{2
Founded in 2015, Wo Lee Green Solutions Ltd is committed to meeting the needs of the construction industry for:
prefabricated modular buildings, green building materials and products, and offering design and build services for steel
structures.
sQöoÛWî:
We provided:

¯Š1òýÛ}ÝNû_ýh
One-stop solution for
design, fabrication and assembly

kZþû˜ýoÛ
Modular building prefabrication services
·<}Ý\r=þûý (MiC)
·<ÝÝ_¯Š=(DfMA)
·<ÿÝÙ\rý=(MiMEP)

|~ýòþû{ýÛwÕ
Research and development
green building materials and products

ë×W{çwÿý_k
Automatic welding for foundation H-Pile

™où{W<}Ý\r=þûý (MiC)
Modular Integrated Construction (MiC) in Hong Kong Science Park
Ü{ýò×ÛoÖ}û‡}ÛY²wý|~öÿ}{
NAMIĀïwõöþûýý\_ßr<}Ý\r=(MiC)þ
ÿsQ^ŸÞ<YÝß]=öëÿÿ]wöýýöý
ßóWþûm÷ÜÛyg2Ü{ýò×Û‰¯}Ý\
r_öþ}ë (Structural Steel) øÿÿsQ¬¬¯Š}ÝW1
}ÝMICkß}ë (Mock-up fabrication) ÿykßnî (Full scale
MiC mock-up test) 2 }Ý\rþÿýù{W]{ÿý
{_žïßWmk_\_ÿÑúS÷NVÛÿóû}Ý
\rëÿïóWþ°m}öþûm÷1ý{î}1ÛyÜ
ôßÿcþ~]2

Wo Lee Green Solutions Ltd and Nano and Advanced Materials

Institute (NAMI) collaborated on a Modular Integrated Construction
(MiC) project with innovative construction methods. The aim of the
project was to propose the concept of MiC in the local construction
environment by improving the construction efficiency, quality, safety
and sustainable development. Wo Lee mainly undertook the structural
steel fabrication of the MiC house as well as: assembly drawing
design, mock up fabrication, and full scale MiC mock up test. The MiC
house is now placed in HKSTP as a demonstration unit. Our teams
collaborate in a non-commercial model and hope to contribute to the
community. We propose the concept of MiC to improve the
construction efficiency, quality, safety and sustainable development of
P.9 the construction industry.
 Ü{wþoß Wo Lee Build Tech Center
Ü{wþoß
Wo Lee Build Tech Center ˜ Y { x ù â w Õ
CITF Pre-approved Technology

úÝ\™ooÏwÿý{^|~]—nÛ^|—‰ÿÜ{¯û Build Tech CenterÿÝÙë×W

{çøÃÿýþþÛÿwwòýwÿý_(Socketed H-Pile)
In order to meet the development and market needs of Hong Kong9s future foundation engineering market,
Wo Lee established the Build Tech Center which is equipped with Robotic Welding Machines such that socketed
H Piles can be processed faster and more accurately.

ÿf，wþoßwÝÎß}ë×
W{çøÃ，‰ý_oúwÿ
ý_òý2

wÿý_öß÷{çTNZò
Û，ÏÞý_ö÷_ýÛ，
w²Ìwÿý{fÿÿ\~û
öý_koöömÿ2

Wo Lee Build Tech Center installed 4

sets of Robotic Welding Arms which
are specific for Socketed H Pile
fabrication. Strengthening the H Piles
with steel plates on both sides using
robotic welders can lead to better
performance and strength.

P.12
P.10
 Fabricated Products

ß×îoW Corrugated Zinc Coated Steel Sheets

òýwÕ

Ûþ
Thickness

0.45mm
0.55mm
0.70mm

ýW Colour Cladding

22
29 21
16 2
7W W7 88
34 32 3
787
Ûþ
Thickness
0.50mm
0.70mm 23
24 8
25
5W W5 3 52 31 129
3
787

ßò Colourÿýp/ ÿp Dark Gray / Light Grayÿþ /ÿp Snow White / Light Grayÿýò /p Green / Grayish White
o}ûÿkwûvb—O÷þŒWrûO\~ûöýW2noö[ßòÿßøçÿkÏûW¬Û}ß2
We can cut into any length that the customers need. More colour to be selected depend on lead-time and quantity.

P.11
 Products
Steel
þÿ Steel Wire Meshes

Hot Rolled
Fabricated
ý|{ÿ Welded Meshes

ñÏþw
þÿ~û ÌÝ Spacing ÿOÝß Unit Weight (kg / sheet)
Ü{ýß Nominal wire W÷÷
U kU

òýwÕ
Wo Lee Sectional Area 2100 x 4800 2134 x 3658 1219 x 2438
size (mm) Main Cross
Reference No. (mm2/M)
Main Cross (mm) (mm) - 7’ x 12’ 4’ x 8’

{ÿ Bare Steel Mesh

kg/m 2

WE5 5 5 150 150 118 20.68 - -

WA98 5 5 200 200 98 15.52 - -
WA142 6 6 200 200 142 22.38 - -

kg/m
ß×{ÿ Galvanized Steel Mesh
2

3 3 50 50 141 - 17.26 6.580

GWM2
4 4 50 50 251 - 30.68 11.70
3 3 25 75 283 - 21.05 8.020
GWM3
3 4 25 75 283 - 25.63 10.66

ß×ó~ÿ Galvanized Mesh for Chain Link Fence

~ÿ~û Mesh Size

5^(ft.) x 50^(ft.) / w(Roll)

1.5(M) x 15(M) / w(Roll)

6^(ft.) x 50^(ft.) / w(Roll)

1.8(M) x 15(M) / w(Roll)

P.29
P.12
ßþ Sections

ý_þ Universal Beams h s

t
b
ó_{þ British Standard BS 4-1:2005 / {ÿ{þ European Standard EN10365:2017
~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
914 x 419 x 388 388.0 921.0 420.5 21.4 36.6
914 x 419 x 343 343.3 911.8 418.5 19.4 32.0
914 x 305 x 289 289.1 926.6 307.7 19.5 32.0
914 x 305 x 253 253.4 918.4 305.5 17.3 27.9
914 x 305 x 224 224.2 910.4 304.1 15.9 23.9
914 x 305 x 201 200.9 903.0 303.3 15.1 20.2
838 x 292 x 226 226.5 850.9 293.8 16.1 26.8
838 x 292 x 194 193.8 840.7 292.4 14.7 21.7
838 x 292 x 176 175.9 834.9 291.7 14.0 18.8
762 x 267 x 197 196.8 769.8 268.0 15.6 25.4
762 x 267 x 173 173.0 762.2 266.7 14.3 21.6
762 x 267 x 147 146.9 754.0 265.2 12.8 17.5
762 x 267 x 134 133.9 750.0 264.4 12.0 15.5
686 x 254 x 170 170.2 692.9 255.8 14.5 23.7
686 x 254 x 152 152.4 687.5 254.5 13.2 21.0
686 x 254 x 140 140.1 683.5 253.7 12.4 19.0
686 x 254 x 125 125.2 677.9 253.0 11.7 16.2
610 x 305 x 238 238.1 635.8 311.4 18.4 31.4
610 x 305 x 179 179.0 620.2 307.1 14.1 23.6
610 x 305 x 149 149.1 612.4 304.8 11.8 19.7
610 x 229 x 140 139.9 617.2 230.2 13.1 22.1
610 x 229 x 125 125.1 612.2 229.0 11.9 19.6
610 x 229 x 113 113.0 607.6 228.2 11.1 17.3
610 x 229 x 101 101.2 602.6 227.6 10.5 14.8
533 x 210 x 122 122.0 544.5 211.9 12.7 21.3
533 x 210 x 109 109.0 539.5 210.8 11.6 18.8
533 x 210 x 101 101.0 536.7 210.0 10.8 17.4
533 x 210 x 92 92.1 533.1 209.3 10.1 15.6
533 x 210 x 82 82.2 528.3 208.8 9.6 13.2
457 x 191 x 98 98.3 467.2 192.8 11.4 19.6
457 x 191 x 89 89.3 463.4 191.9 10.5 17.7
457 x 191 x 82 82.0 460.0 191.3 9.9 16.0
457 x 191 x 74 74.3 457.0 190.4 9.0 14.5
457 x 191 x 67 67.1 453.4 189.9 8.5 12.7
457 x 152 x 82 82.1 465.8 155.3 10.5 18.9
457 x 152 x 74 74.2 462.0 154.4 9.6 17.0
457 x 152 x 67 67.2 458.0 153.8 9.0 15.0
457 x 152 x 60 59.8 454.6 152.9 8.1 13.3
457 x 152 x 52 52.3 449.8 152.4 7.6 10.9
406 x 178 x 74 74.2 412.8 179.5 9.5 16.0
406 x 178 x 67 67.1 409.4 178.8 8.8 14.3
406 x 178 x 60 60.1 406.4 177.9 7.9 12.8
406 x 178 x 54 54.1 402.6 177.7 7.7 10.9
406 x 140 x 46 46.0 403.2 142.2 6.8 11.2
406 x 140 x 39 39.0 398.0 141.8 6.4 8.6
356 x 171 x 67 67.1 363.4 173.2 9.1 15.7
356 x 171 x 57 57.0 358.0 172.2 8.1 13.0
356 x 171 x 51 51.0 355.0 171.5 7.4 11.5
356 x 171 x 45 45.0 351.4 171.1 7.0 9.7
356 x 171 x 39 39.1 353.4 126.0 6.6 10.7
356 x 171 x 33 33.1 349.0 125.4 6.0 8.5
305 x 165 x 54 54.0 310.4 166.9 7.9 13.7
305 x 165 x 46 46.1 306.6 165.7 6.7 11.8
305 x 165 x 40 40.3 303.4 165.0 6.0 10.2

P.13
 ßþ Sections
ý_þ Universal Beams h s

t
b
ó_{þ British Standard BS 4-1:2005 / {ÿ{þ European Standard EN10365:2017
~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm

305 x 127 x 48 48.1 311.0 125.3 9.0 14.0

305 x 127 x 42 41.9 307.2 124.3 8.0 12.1
305 x 127 x 37 37.0 304.4 123.4 7.1 10.7

305 x 102 x 33 32.8 312.7 102.4 6.6 10.8

305 x 102 x 28 28.2 308.7 101.8 6.0 8.8
305 x 102 x 25 24.8 305.1 101.6 5.8 7.0

254 x 146 x 43 43.0 259.6 147.3 7.2 12.7

254 x 146 x 37 37.0 256.0 146.4 6.3 10.9
254 x 146 x 31 31.1 251.4 146.1 6.0 8.6

254 x 102 x 28 28.3 260.4 102.2 6.3 10.0

254 x 102 x 25 25.2 257.2 101.9 6.0 8.4
254 x 102 x 22 22.0 254.0 101.6 5.7 6.8

203 x 133 x 30 30.0 206.8 133.9 6.4 9.6

203 x 133 x 25 25.1 203.2 133.2 5.7 7.8
203 x 102 x 23 23.1 203.2 101.8 5.4 9.3

178 x 102 x 19 19.0 177.8 101.2 4.8 7.9

152 x 89 x 16 16.0 152.4 88.7 4.5 7.7
127 x 76 x 13 13.0 127.0 76.0 4.0 7.6

P.14
ßþ Sections

ý_þ ÿ{šĀUniversal Columns h

s

t
b
ó_{þ British Standard BS 4-1:2005 / {ÿ{þ European Standard EN10365:2017
~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
356 x 406 x 634 633.9 474.6 424.0 47.6 77.0
356 x 406 x 551 551.0 455.6 418.5 42.1 67.5
356 x 406 x 467 467.0 436.6 412.2 35.8 58.0
356 x 406 x 393 393.0 419.0 407.0 30.6 49.2
356 x 406 x 340 339.9 406.4 403.0 26.6 42.9
356 x 406 x 287 287.1 393.6 399.0 22.6 36.5
356 x 406 x 235 235.1 381.0 394.8 18.4 30.2
356 x 368 x 202 201.9 374.6 374.7 16.5 27.0
356 x 368 x 177 177.0 368.2 372.6 14.4 23.8
356 x 368 x 153 152.9 362.0 370.5 12.3 20.7
356 x 368 x 129 129.0 355.6 368.6 10.4 17.5
305 x 305 x 283 282.9 365.3 322.2 26.8 44.1
305 x 305 x 240 240.0 352.5 318.4 23.0 37.7
305 x 305 x 198 198.1 339.9 314.5 19.1 31.4
305 x 305 x 158 158.1 327.1 311.2 15.8 25.0
305 x 305 x 137 136.9 320.5 309.2 13.8 21.7
305 x 305 x 118 117.9 314.5 307.4 12.0 18.7
305 x 305 x 97 96.9 307.9 305.3 9.9 15.4
254 x 254 x 167 167.1 289.1 265.2 19.2 31.7
254 x 254 x 132 132.0 276.3 261.3 15.3 25.3
254 x 254 x 107 107.1 266.7 258.8 12.8 20.5
254 x 254 x 89 88.9 260.3 256.3 10.3 17.3
254 x 254 x 73 73.1 254.1 254.6 8.6 14.2
203 x 203 x 86 86.1 222.2 209.1 12.7 20.5
203 x 203 x 71 71.0 215.8 206.4 10.0 17.3
203 x 203 x 60 60.0 209.6 205.8 9.4 14.2
203 x 203 x 52 52.0 206.2 204.3 7.9 12.5
203 x 203 x 46 46.1 203.2 203.6 7.2 11.0
152 x 152 x 37 37.0 161.8 154.4 8.0 11.5
152 x 152 x 30 30.0 157.6 152.9 6.5 9.4
152 x 152 x 23 23.0 152.4 152.2 5.8 6.8

P.15
 Sections
Steel
ý_þk Universal Bearing Piles

Hot Rolled
s
h

ñÏþwßþ
t
b
ó_{þ British Standard BS 4-1:2005 / {ÿ{þ European Standard EN10365:2017

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
356 x 368 x 174 173.9 361.4 378.5 20.3 20.4
356 x 368 x 152 152.0 356.4 376.0 17.8 17.9
356 x 368 x 133 133.0 352.0 373.8 15.6 15.7
356 x 368 x 109 108.9 346.4 371.0 12.8 12.9
305 x 305 x 223 222.9 337.9 325.7 30.3 30.4
305 x 305 x 186 186.0 328.3 320.9 25.5 25.6
305 x 305 x 180* 180.0 326.7 319.7 24.8 24.8
305 x 305 x 149 149.1 318.5 316.0 20.6 20.7
305 x 305 x 126 126.1 312.3 312.9 17.5 17.6
305 x 305 x 110 110.0 307.9 310.7 15.3 15.4
305 x 305 x 95 94.9 303.7 308.7 13.3 13.3
305 x 305 x 88 88.0 301.7 307.8 12.4 12.3
305 x 305 x 79 78.9 299.3 306.4 11.0 11.1
254 x 254 x 85 85.1 254.3 260.4 14.4 14.3
254 x 254 x 71 71.0 249.7 258.0 12.0 12.0
254 x 254 x 63 63.0 247.1 256.6 10.6 10.7
203 x 203 x 54 53.9 204.0 207.7 11.3 11.4
203 x 203 x 45 44.9 200.2 205.9 9.5 9.5
*305 x 305 x 180 is not in accordance with BS4 Part 1: 2005 / EN 10365:2017

P.16
P.29
ßþ Sections
ý_þÿóĀH Beams h
s h s

t t
b b
o_{þ Chinese Standard GB/T 11263:2017

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
HW 100 x 100 16.9 100.0 100.0 6.0 8.0
HW 125 x 125 23.6 125.0 125.0 6.5 9.0
HW 150 x 150 31.1 150.0 150.0 7.0 10.0
HW 175 x 175 40.4 175.0 175.0 7.5 11.0
HW 200 x 200 49.9 200.0 200.0 8.0 12.0
HW 200 x 200 56.2 200.0 204.0 12.0 12.0
HW 250 x 250 63.8 244.0 252.0 11.0 11.0
HW 250 x 250 71.8 250.0 250.0 9.0 14.0
HW 250 x 250 81.6 250.0 255.0 14.0 14.0
HW 300 x 300 83.5 294.0 302.0 12.0 12.0
HW 300 x 300 93.0 300.0 300.0 10.0 15.0
HW 300 x 300 105 300.0 305.0 15.0 15.0
HW 350 x 350 105 338.0 351.0 13.0 13.0
HW 350 x 350 113 344.0 348.0 10.0 16.0
HW 350 x 350 129 344.0 354.0 16.0 16.0
HW 350 x 350 135 350.0 350.0 12.0 19.0
HW 350 x 350 154 350.0 357.0 19.0 19.0
HW 400 x 400 140 388.0 402.0 15.0 15.0
HW 400 x 400 147 394.0 398.0 11.0 18.0
HW 400 x 400 168 394.0 405.0 18.0 18.0
HW 400 x 400 172 400.0 400.0 13.0 21.0
HW 400 x 400 197 400.0 408.0 21.0 21.0
HW 400 x 400 232 414.0 405.0 18.0 28.0
HW 400 x 400 283 428.0 407.0 20.0 35.0
HW 400 x 400 415 458.0 417.0 30.0 50.0
HW 400 x 400 604 498.0 432.0 45.0 70.0
HW 500 x 500 202 492.0 465.0 15.0 20.0
HW 500 x 500 239 502.0 465.0 15.0 25.0
HW 500 x 500 259 502.0 470.0 20.0 25.0
HM 150 x 100 20.7 148.0 100.0 6.0 9.0
HM 200 x 150 29.9 194.0 150.0 6.0 9.0
HM 250 x 175 43.6 244.0 175.0 7.0 11.0
HM 300 x 200 55.8 294.0 200.0 8.0 12.0
HM 300 x 200 64.4 298.0 201.0 9.0 14.0
HM 350 x 250 78.1 340.0 250.0 9.0 14.0
HM 400 x 300 105 390.0 300.0 10.0 16.0
HM 450 x 300 121 440.0 300.0 11.0 18.0
HM 500 x 300 111 482.0 300.0 11.0 15.0
HM 500 x 300 125 488.0 300.0 11.0 18.0
HM 550 x 300 116 544.0 300.0 11.0 15.0
HM 550 x 300 130 550.0 300.0 11.0 18.0
HM 600 x 300 133 582.0 300.0 12.0 17.0
HM 600 x 300 147 588.0 300.0 12.0 20.0
HM 600 x 300 170 594.0 302.0 14.0 23.0
HN 100 x 50 9.30 100.0 50.0 5.0 7.0
HM 125 x 60 13.1 125.0 60.0 6.0 8.0
HM 150 x 75 14.0 150.0 75.0 5.0 7.0
HM 175 x 90 18.0 175.0 90.0 5.0 8.0
HN 200 x 100 17.8 198.0 99.0 4.5 7.0
HN 200 x 100 20.9 200.0 100.0 5.5 8.0
HN 250 x 125 25.1 248.0 124.0 5.0 8.0
HN 250 x 125 29.0 250.0 125.0 6.0 9.0

P.17
 Sections
Steel
ý_þÿóĀH Beams

Hot Rolled
h s

ñÏþwßþ
t
b
o_{þ Chinese Standard GB/T 11263:2017

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
HN 300 x 150 32.0 298.0 149.0 5.5 8.0
HN 300 x 150 36.7 300.0 150.0 6.5 9.0
HN 350 x 175 41.2 346.0 174.0 6.0 9.0
HN 350 x 175 49.4 350.0 175.0 7.0 11.0
HN 400 x 150 55.2 400.0 150.0 8.0 13.0
HN 400 x 200 56.1 396.0 199.0 7.0 11.0
HN 400 x 200 65.4 400.0 200.0 8.0 13.0
HN 450 x 150 52.6 446.0 150.0 7.0 12.0
HN 450 x 150 60.8 450.0 151.0 8.0 14.0
HN 450 x 200 65.1 446.0 199.0 8.0 12.0
HN 450 x 200 74.9 450.0 200.0 9.0 14.0
HN 475 x 150 56.2 470.0 150.0 7.0 13.0
HN 475 x 150 67.6 475.0 151.5 8.5 15.5
HN 475 x 150 83.5 482.0 153.5 10.5 19.0
HN 500 x 150 55.1 492.0 150.0 7.0 12.0
HN 500 x 150 72.4 500.0 152.0 9.0 16.0
HN 500 x 150 81.1 504.0 153.0 10.0 18.0
HN 500 x 200 77.9 496 199.0 9.0 14.0
HN 500 x 200 88.1 500 200.0 10.0 16.0
HN 500 x 200 102 506 201.0 11.0 19.0
HN 550 x 200 81.5 546.0 199.0 9.0 14.0
HN 550 x 200 92.0 550.0 200.0 10.0 16.0
HN 600 x 200 92.4 596.0 199.0 10.0 15.0
HN 600 x 200 103 600.0 200.0 11.0 17.0
HN 600 x 200 118 606.0 201.0 12.0 20.0
HN 625 x 200 118 625.0 198.5 13.5 17.5
HN 625 x 200 133 630.0 200.0 15.0 20.0
HN 625 x 200 156 638.0 202.0 17.0 24.0
HN 650 x 300 144 646.0 299.0 12.0 18.0
HN 650 x 300 159 650.0 300.0 13.0 20.0
HN 650 x 300 173 654.0 301.0 14.0 22.0
HN 700 x 300 163 692.0 300.0 13.0 20.0
HN 700 x 300 182 700.0 300.0 13.0 24.0
HN 750 x 300 143 734.0 299.0 12.0 16.0
HN 750 x 300 168 742.0 300.0 13.0 20.0
HN 750 x 300 187 750.0 300.0 13.0 24.0
HN 750 x 300 224 758.0 303.0 16.0 28.0
HN 800 x 300 188 792.0 300.0 14.0 22.0
HN 800 x 300 207 800.0 300.0 14.0 26.0
HN 850 x 300 179 834.0 298.0 14.0 19.0
HN 850 x 300 204 842.0 299.0 15.0 23.0
HN 850 x 300 229 850.0 300.0 16.0 27.0
HN 850 x 300 255 858.0 301.0 17.0 31.0
HN 900 x 300 210 890.0 299.0 15.0 23.0
HN 900 x 300 240 900.0 300.0 16.0 28.0
HN 900 x 300 283 912.0 302.0 18.0 34.0
HN 1000 x 300 217 970.0 297.0 16.0 21.0
HN 1000 x 300 248 980.0 298.0 17.0 26.0
HN 1000 x 300 271 990.0 298.0 17.0 31.0
HN 1000 x 300 310 1000.0 300.0 19.0 36.0
HT 100 x 50 5.98 95.0 48.0 3.2 4.5
HT 100 x 50 7.36 97.0 49.0 4.0 5.5

P.29
P.18
ßþ Sections

ý_þÿóĀH Beams h
s h s

t t
b b
o_{þ Chinese Standard GB/T 11263:2017

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
HT 100 x 100 12.7 96.0 99.0 4.5 6.0
HT 125 x 60 7.26 118.0 58.0 3.2 4.5
HT 125 x 60 8.94 120.0 59.0 4.0 5.5
HT 125 x 125 15.8 119.0 123.0 4.5 6.0
HT 150 x 75 9.00 145.0 73.0 3.2 4.5
HT 150 x 75 11.1 147.0 74.0 4.0 5.5
HT 150 x 100 10.6 139.0 97.0 3.2 4.5
HT 150 x 100 14.3 142.0 99.0 4.5 6.0
HT 150 x 150 21.8 144.0 148.0 5.0 7.0
HT 150 x 150 26.4 147.0 149.0 6.0 8.5
HT 175 x 90 10.6 168.0 88.0 3.2 4.5
HT 175 x 90 13.8 171.0 89.0 4.0 6.0
HT 175 x 175 26.2 167.0 173.0 5.0 7.0
HT 175 x 175 35.0 172.0 175.0 6.5 9.5
HT 200 x 100 12.0 193.0 98.0 3.2 4.5
HT 200 x 100 15.5 196.0 99.0 4.0 6.0
HT 200 x 150 20.7 188.0 149.0 4.5 6.0
HT 200 x 200 34.3 192.0 198.0 6.0 8.0

ý_þÿýóĀI Sections (Tapered Flange) h s

o_{þ Chinese Standard GB/T 706:2016 b

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
100 x 68 x 4.5 11.3 100.0 68.0 4.5 7.6
120 x 74 x 5.0 14.0 120.0 74.0 5.0 8.4
126 x 74 x 5.0 14.2 126.0 74.0 5.0 8.4
140 x 80 x 5.5 16.9 140.0 80.0 5.5 9.1
160 x 88 x 6.0 20.5 160.0 88.0 6.0 9.9
180 x 94 x 6.5 24.1 180.0 94.0 6.5 10.7
200 x 100 x 7.0 27.9 200.0 100.0 7.0 11.4
200 x 102 x 9.0 31.1 200.0 102.0 9.0 11.4
220 x 110 x 7.5 33.1 220.0 110.0 7.5 12.3
220 x 112 x 9.5 36.5 220.0 112.0 9.5 12.3
240 x 116 x 8.0 37.5 240.0 116.0 8.0 13.0
240 x 118 x 10.0 41.2 240.0 118.0 10.0 13.0
250 x 116 x 8.0 38.1 250.0 116.0 8.0 13.0
250 x 118 x 10.0 42.0 250.0 118.0 10.0 13.0
270 x 122 x 8.5 42.8 270.0 122.0 8.5 13.7
270 x 124 x 10.5 47.0 270.0 124.0 10.5 13.7
280 x 122 x 8.5 43.5 280.0 122.0 8.5 13.7
280 x 124 x 10.5 47.9
P.19 280.0 124.0 10.5 13.7
 Sections
Steel
ý_þÿýóĀI Sections (Tapered Flange)

Hot Rolled
h s

ñÏþwßþ
t

o_{þ Chinese Standard GB/T 706:2016 b

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
300 x 126 x 9.0 48.1 300.0 126.0 9.0 14.4
300 x 128 x 11.0 52.8 300.0 128.0 11.0 14.4
300 x 130 x 13.0 57.5 300.0 130.0 13.0 14.4
320 x 130 x 9.5 52.7 320.0 130.0 9.5 15.0
320 x 132 x 11.5 57.7 320.0 132.0 11.5 15.0
320 x 134 x 13.5 62.7 320.0 134.0 13.5 15.0
360 x 136 x 10.0 60.0 360.0 136.0 10.0 15.8
360 x 138 x 12.0 65.7 360.0 138.0 12.0 15.8
360 x 140 x 14.0 71.3 360.0 140.0 14.0 15.8
400 x 142 x 10.5 67.6 400.0 142.0 10.5 16.5
400 x 144 x 12.5 73.8 400.0 144.0 12.5 16.5
400 x 146 x 14.5 80.1 400.0 146.0 14.5 16.5
450 x 150 x 11.5 80.4 450.0 150.0 11.5 18.0
450 x 152 x 13.5 87.4 450.0 152.0 13.5 18.0
450 x 154 x 15.5 94.5 450.0 154.0 15.5 18.0
500 x 158 x 12.0 93.6 500.0 158.0 12.0 20.0
500 x 160 x 14.0 101 500.0 160.0 14.0 20.0
500 x 162 x 16.0 109 500.0 162.0 16.0 20.0
550 x 166 x 12.5 105 550.0 166.0 12.5 21.0
550 x 168 x 14.5 114 550.0 168.0 14.5 21.0
550 x 170 x 16.5 123 550.0 170.0 16.5 21.0
560 x 166 x 12.5 106 560.0 166.0 12.5 21.0
560 x 168 x 14.5 115 560.0 168.0 14.5 21.0
560 x 170 x 16.5 124 560.0 170.0 16.5 21.0
630 x 176 x 13.0 121 630.0 176.0 13.0 22.0
630 x 178 x 15.0 131 630.0 178.0 15.0 22.0
630 x 180 x 17.0 141 630.0 180.0 17.0 22.0

P.29
P.20
ßþ Sections
ýþÿýóĀChannels (Tapered Flange) h s

t
b
o_{þ Chinese Standard GB/T 706:2016

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
50 x 37 x 4.5 5.44 50.0 37.0 4.5 7.0
63 x 40 x 4.8 6.63 63.0 40.0 4.8 7.5
65 x 40 x 4.3 6.51 65.0 40.0 4.3 7.5
80 x 43 x 5.0 8.04 80.0 43.0 5.0 8.0
100 x 48 x 5.3 10.0 100.0 48.0 5.3 8.5
120 x 53 x 5.5 12.1 120.0 53.0 5.5 9.0
126 x 53 x 5.5 12.3 126.0 53.0 5.5 9.0
140 x 58 x 6.0 14.5 140.0 58.0 6.0 9.5
140 x 60 x 8.0 16.7 140.0 60.0 8.0 9.5
160 x 63 x 6.5 17.2 160.0 63.0 6.5 10.0
160 x 65 x 8.5 19.8 160.0 65.0 8.5 10.0
180 x 68 x 7.0 20.2 180.0 68.0 7.0 10.5
180 x 70 x 9.0 23.0 180.0 70.0 9.0 10.5
200 x 73 x 7.0 22.6 200.0 73.0 7.0 11.0
200 x 75 x 9.0 25.8 200.0 75.0 9.0 11.0
220 x 77 x 7.0 25.0 220.0 77.0 7.0 11.5
220 x 79 x 9.0 28.5 220.0 79.0 9.0 11.5
240 x 78 x 7.0 26.9 240.0 78.0 7.0 12.0
240 x 80 x 9.0 30.6 240.0 80.0 9.0 12.0
240 x 82 x 11.0 34.4 240.0 82.0 11.0 12.0
250 x 78 x 7.0 27.4 250.0 78.0 7.0 12.0
250 x 80 x 9.0 31.3 250.0 80.0 9.0 12.0
250 x 82 x 11.0 35.3 250.0 82.0 11.0 12.0
270 x 82 x 7.5 30.8 270.0 82.0 7.5 12.5
270 x 84 x 9.5 35.1 270.0 84.0 9.5 12.5
270 x 86 x 11.5 39.3 270.0 86.0 11.5 12.5
280 x 82 x 7.5 31.4 280.0 82.0 7.5 12.5
280 x 84 x 9.5 35.8 280.0 84.0 9.5 12.5
280 x 86 x 11.5 40.2 280.0 86.0 11.5 12.5
300 x 85 x 7.5 34.5 300.0 85.0 7.5 13.5
300 x 87 x 9.5 39.2 300.0 87.0 9.5 13.5
300 x 89 x 11.5 43.9 300.0 89.0 11.5 13.5
320 x 88 x 8.0 38.1 320.0 88.0 8.0 14.0
320 x 90 x 10.0 43.1 320.0 90.0 10.0 14.0
320 x 92 x 12.0 48.1 320.0 92.0 12.0 14.0
360 x 96 x 9.0 47.8 360.0 96.0 9.0 16.0
360 x 98 x 11.0 53.5 360.0 98.0 11.0 16.0
360 x 100 x 13.0 59.1 360.0 100.0 13.0 16.0
400 x 100 x 10.5 58.9 400.0 100.0 10.5 18.0
400 x 102 x 12.5 65.2 400.0 102.0 12.5 18.0
400 x 104 x 14.5 71.5 400.0 104.0 14.5 18.0

P.21
 ßþ Sections
ýþÿýóĀChannels (Tapered Flange)
h s

t
ó_{þ British Standard BS 4-1:1993 / {ÿ{þ European Standard EN10365:2017 b

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
432 x 102 x 65 65.5 431.8 101.6 12.2 16.8
381 x 102 x 55 55.0 381.0 101.6 10.4 16.3
305 x 102 x 46 46.2 304.8 101.6 10.2 14.8
305 x 89 x 42 41.8 304.8 88.9 10.2 13.7
254 x 89 x 36 35.7 254.0 88.9 9.1 13.6
254 x 76 x 28 28.2 254.0 76.2 8.1 10.9
229 x 89 x 33 32.7 228.6 88.9 8.6 13.3
229 x 76 x 26 26.1 228.6 76.2 7.6 11.2
203 x 89 x 30 29.8 203.2 88.9 8.1 12.9
203 x 76 x 24 23.9 203.2 76.2 7.1 11.2
178 x 89 x 27 26.8 177.8 88.9 7.6 12.3
178 x 76 x 21 20.8 177.8 76.2 6.6 10.3
152 x 89 x 24 23.9 152.4 88.9 7.1 11.6
152 x 76 x 18 17.9 152.4 76.2 6.4 9.0
127 x 64 x 15 14.9 127.0 63.5 6.4 9.2
102 x 51 x 10 10.4 101.6 50.8 6.1 7.6
76 x 38 x 7 6.7 76.2 38.1 5.1 6.8

åo{þ Japanese Standard JIS G3192

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
62.0 380.0 100.0 13.0 16.5
380 x 100
54.5 380.0 100.0 10.5 16.0
43.8 300.0 90.0 10.0 15.5
300 x 90
38.1 300.0 90.0 9.0 13.0
40.2 250.0 90.0 11.0 14.5
250 x 90
34.6 250.0 90.0 9.0 13.0
200 x 90200 x 90 30.3 30.3 200.0 200.0 90.0 90.0 8.0 8.0 13.5 13.5
200 x 80 24.6 200.0 80.0 7.5 11.0
180 x 75 21.4 180.0 75.0 7.0 10.5
24.0 150.0 75.0 9.0 12.5
150 x 75
18.6 150.0 75.0 6.5 10.0
200 x 90125 x 65 30.3 13.4 200.0 125.0 90.0 65.0 8.0 6.0 13.5 8.0
100 x 50 9.36 100.0 50.0 5.0 7.5
75 x 40 6.92 75.0 40.0 5.0 7.0

o_þþ{þ Chinese Mill Standard

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm

203 x 76 x 7.1 23.9 203.0 76.0 7.1 11.2

152 x 89 x 7.1 23.8 152.0 89.0 7.1 11.6
150 x 75 x 5.5 14.7 150.0 75.0 5.5 7.3
125 x 65 x 5.2 11.7 125.0 65.0 5.2 6.8

P.22
ßþ Sections

ýþÿýóĀChannels (Tapered Flange)

h s

t
o_þþ{þ Chinese Mill Standard b

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm

102 x 51 x 6.1 10.4 102.0 51.0 6.1 7.6

100 x 50 x 3.8 7.3 100.0 50.0 3.8 5.8
75 x 40 x 3.8 5.3 75.0 40.0 3.8 5.2
63 x 37 x 5.0 6.6 63.0 37.0 5.0 7.0
50 x 25 x 4.0 3.0 50.0 25.0 4.0 5.0
50 x 25 x 3.0 2.6 50.0 25.0 3.0 5.0

ýþÿýóĀChannels (Parallel Flange) h s

ó_{þ British Standard BS 4-1:2005 / {ÿ{þ European Standard EN10365:2017 b

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm
430 x 100 x 64 64.4 430.0 100.0 11.0 19.0
380 x 100 x 54 54.0 380.0 100.0 9.5 17.5
300 x 100 x 46 45.5 300.0 100.0 9.0 16.5
300 x 90 x 41 41.4 300.0 90.0 9.0 15.5
260 x 90 x 35 34.8 260.0 90.0 8.0 14.0
260 x 75 x 28 27.6 260.0 75.0 7.0 12.0
230 x 90 x 32 32.2 230.0 90.0 7.5 14.0
230 x 75 x 26 25.7 230.0 75.0 6.5 12.5
200 x 90 x 30 29.7 200.0 90.0 7.0 14.0
200 x 75 x 23 23.4 200.0 75.0 6.0 12.5
180 x 90 x 26 26.1 180.0 90.0 6.5 12.5
180 x 75 x 20 20.3 180.0 75.0 6.0 10.5
150 x 90 x 24 23.9 150.0 90.0 6.5 12.0
150 x 75 x 18 17.9 150.0 75.0 5.5 10.0
125 x 65 x 15 14.8 125.0 65.0 5.5 9.5
100 x 50 x 10 10.2 100.0 50.0 5.0 8.5

wÞþþ{þ Miscellaneous Mill Standard

~û ÿOÝß Úþ ÿþ ñÛ ÿÛ
Designation Mass per unit length Depth of section Width of section Web Thickness Flange Thickness
h b s t
kg/m mm mm mm mm

200 x 75 24.3 200.0 75.0 7.5 11.4

100 x 50 10.1 100.0 50.0 5.0 8.4

P.23
 ßþ Sections
t

Ûþÿ{šĀEqual Angles D

B
_Ÿ{þ International Standard / {ÿ{þ European Standard EN10056-1:2017
~û Ûþ ÿOÝß ~û Ûþ ÿOÝß
Size Thickness Mass per unit length Size Thickness Mass per unit length
DxB t DxB t
mm mm kg/m mm mm kg/m
2.5 0.748 5.0 5.76
20 x 20
3.0 0.882 5.5 6.30
6.0 6.85
2.5 0.946
8.0 8.99
2.7 1.03 75 x 75
8.2 9.17
25 x 25 3.0 1.12
9.0 10.0
4.0 1.45
10.0 11.1
5.0 1.78
12.0 13.0
2.5 1.14
2.7 1.25 6.0 7.34
3.0 1.36 80 x 80 8.0 9.63
30 x 30 10.0 11.9
3.7 1.62
4.0 1.78 6.0 8.30
5.0 2.18 7.0 9.61
1.46 8.0 10.9
2.5
1.60 90 x 90 9.0 12.2
2.7
1.74 10.0 13.4
3.0
38 x 38 2.08 12.0 15.9
3.7
2.26 13.0 17.0
4.0
4.6 2.57 6.0 9.26
5.0 2.79 7.0 10.7
8.0 12.2
2.7 1.68
100 x 100 10.0 15.0
3.0 1.84
12.0 17.8
40 x 40 4.0 2.42
13.0 19.2
5.0 2.97
15.0 21.9
6.0 3.52
8.0 14.7
3.0 2.09
120 x 120 10.0 18.2
45 x 45 4.0 2.74
12.0 21.6
5.0 3.38
10.0 18.0
3.0 2.33 125 x 125 12.0 22.5
3.7 2.82
4.0 3.06 9.0 17.9
4.6 3.47 10.0 19.8
50 x 50 130 x 130
5.0 3.77 12.0 23.6
5.5 4.08 15.0 29.0
6.0 4.47 10.0 23.0
8.0 5.82 12.0 27.3
4.0 3.70 14.0 31.6
5.0 4.57 150 x 150 15.0 33.8
60 x 60 6.0 5.42 18.0 40.1
8.0 7.09 19.0 42.1
10.0 8.69 20.0 44.2
5.0 4.97 13.0 39.8
5.5 5.43 16.0 48.5
65 x 65 6.0 5.91 200 x 200 18.0 54.3
8.0 7.73 20.0 59.9
9.0 8.62 24.0 71.1
5.0 5.37 250 x 250 25.0 93.2
6.0 6.38
70 x 70 7.0 7.38
8.0 8.37
10.0 10.3

P.24
ßþ Sections
t

ÛþÿO{šĀUnequal Angles D

_Ÿ{þ International Standard / {ÿ{þ European Standard EN10056-1:2017

~û Ûþ ÿOÝß ~û Ûþ ÿOÝß
Size Thickness Mass per unit length Size Thickness Mass per unit length
DxB t DxB t
mm mm kg/m mm mm kg/m
40 x 25 4.0 1.93 6.0 8.04
100 x 75 8.0 10.6
5.0 2.96
50 x 30 10.0 13.0
6.0 3.51
6.0 9.24
50 x 40 5.0 3.36
8.0 12.2
60 x 40 5.0 3.76 125 x 75
10.0 15.0
65 x 40 5.0 3.69
12.0 17.8
5.0 4.35
65 x 50 10.0 17.0
6.0 5.16 150 x 75
12.0 20.2
5.0 4.75
9.0 16.5
75 x 50 6.0 5.65
150 x 90 10.0 18.2
8.0 7.39
12.0 21.6
6.0 6.85
90 x 65 10.0 19.0
8.0 9.35 150 x 100
12.0 22.5
6.0 6.84
100 x 50 10.0 23.0
8.0 8.97
200 x 100 12.0 27.3
7.0 8.77 15.0 33.8
100 x 65 8.0 9.94
200 x 150 15.0 39.6
9.0 11.1

ýþ Square Bars B

_Ÿ{þ International Standard / {ÿ{þ European Standard EN10059:2003

~û ÿOÝß ~û ÿOÝß
Size Mass per unit length Size Mass per unit length
DxB DxB
mm kg/m mm kg/m
8 0.502 22 3.80
10 0.785 25 4.91
12 1.13 32 8.04
16 2.01 38 11.3
19 2.83 40 12.6
20 3.14 50 19.6

P.25
 ßþ Sections
cþ Flat Bars t

_Ÿ{þ International Standard / {ÿ{þ European Standard EN10058:2018

ÿOÝß Ûþ Thickness t (mm)
Unit
Weight
3 4 4.5 5 6 8 9 10 12 15 16 19 20 25
(S[/ kg/m)
12 0.28 0.38 0.42 0.47 0.57 0.75 0.85 0.94
16 0.38 0.50 0.57 0.63 0.75 1.00 1.13 1.26 1.51
19 0.45 0.60 0.67 0.75 0.89 1.19 1.34 1.49 1.79 2.24
20 0.47 0.63 0.71 0.79 0.94 1.26 1.41 1.57 1.88 2.36 2.51
25 0.59 0.79 0.88 0.98 1.18 1.57 1.77 1.96 2.36 2.94 3.14 3.73
30 0.71 0.94 1.06 1.18 1.41 1.88 2.12 2.36 2.83 3.53 3.77 4.47 4.71
Width B (mm)

32 0.75 1.00 1.13 1.26 1.51 2.01 2.26 2.51 3.01 3.77 4.02 4.77 5.02 6.28
38 0.89 1.19 1.34 1.49 1.79 2.39 2.68 2.98 3.58 4.47 4.77 5.67 5.97 7.46
40 0.94 1.26 1.41 1.57 1.88 2.51 2.83 3.14 3.77 4.71 5.02 5.97 6.28 7.85
44 1.04 1.38 1.55 1.73 2.07 2.76 3.11 3.45 4.14 5.18 5.53 6.56 6.91 8.64
50 1.18 1.57 1.77 1.96 2.36 3.14 3.53 3.93 4.71 5.89 6.28 7.46 7.85 9.81
60 1.41 1.88 2.12 2.36 2.83 3.77 4.24 4.71 5.65 7.07 7.54 8.95 9.42 11.8
65 1.53 2.04 2.30 2.55 3.06 4.08 4.59 5.10 6.12 7.65 8.16 9.69 10.2 12.8
ÿþ

75 1.77 2.36 2.65 2.94 3.53 4.71 5.30 5.89 7.07 8.83 9.42 11.2 11.8 14.7
90 2.12 2.83 3.18 3.53 4.24 5.65 6.36 7.07 8.48 10.6 11.3 13.4 14.1 17.7
100 2.36 3.14 3.53 3.93 4.71 6.28 7.07 7.85 9.42 11.8 12.6 14.9 15.7 19.6
125 3.93 4.42 4.91 5.89 7.85 8.83 9.81 11.8 14.7 15.7 18.6 19.6 24.5
130 4.59 5.10 6.12 8.16 9.18 10.2 12.2 15.3 16.3 19.4 20.4 25.5
150 5.89 7.07 9.42 10.6 11.8 14.1 17.7 18.8 22.4 23.6 29.4
200 9.42 12.6 14.1 15.7 18.8 23.6 25.1 29.8 31.4 39.3

ÚëÛ¿þ Deformed Bars D

ó_{þ British Standard BS 4449:2005 / CS2:2012

öß ÿOÝß öß ÿOÝß
Diameter Diameter
Mass per unit length Mass per unit length
D D
mm kg/m mm kg/m
10 0.617 25 3.854
12 0.888 32 6.313
16 1.579 40 9.864
20 2.466
ÿîû[·Wßé
Approved Q.A. Stockist Supplies

Wþ Round Bars D

_Ÿ{þ International Standard / {ÿ{þ European Standard EN10060:2003

öß ÿOÝß öß ÿOÝß öß ÿOÝß
Diameter Diameter Diameter
Mass per unit length Mass per unit length Mass per unit length
D D D
mm kg/m mm kg/m mm kg/m
6 0.222 28 4.83 55 18.7
8 0.395 30 5.55 60 22.2
9 0.499 32 6.31 65 26.0
10 0.617 35 7.55 70 30.2
12 0.888 38 8.90 75 34.7
16 1.58 40 9.86 80 39.5
19 2.23 44 11.9 90 49.9
20 2.47 45 12.5 95 55.6
22 2.98 50 15.4 100 61.7
25 3.85 P.26
ßþ Sections
t

þk Sheet Piles H

B
åo{þ Japanese Standard JIS A-5528
ßß | Dimensions ÿOÝß Unit Weight W÷÷ Sectional Area cgÿ Moment of Inertia
Designation ÿþ Úþ ñÛ Per Pile Per Wall Per Pile Per Wall Per Pile Per Wall
Width Height Thickness Width Width Width
B H t W W A A lx lx
mm mm mm kg/m kg/m 2
cm 2
cm /m2
cm4 cm4/m
Type 2 400 100 10.5 48.0 120 61.2 153.0 1240 8740
Type 3 400 125 13.0 60.0 150 76.4 191.0 2220 16800
Type 4 400 170 15.5 76.1 190 97.0 242.5 4670 38600

ßß W÷k} Modulus of Section

Designation Per Pile Per Wall
Width
Zx Zx
cm3 cm3/m
Type 2 152 874
Type 3 223 1340
Type 4 362 2270

Overall Width 370

Ÿß÷_þk 55
3 Effective Width 333

Light Sheet Piles 50 29 120 29

20
29 120 29 50
5
74

476
LSP-2B LSP-3B
þý{þ Mill Standard
ßß | Dimensions ÿOÝß Unit Weight W÷÷ Sectional Area cgÿ Moment of Inertia
Designation ÿþ Úþ ñÛ Per Pile Per Wall Per Pile Per Wall Per Pile Per Wall
Width Height Thickness Width Width Width
B H t W W A A lx lx
mm mm mm kg/m kg/m 2
cm 2
cm /m2
cm4 cm4/m
LSP-2B 476 55 3 14.6 32.4 - - - -
333 74 5 21.6 64.8 27.5 82.5 212 636
LSP-3B
333 75 6 25.9 77.7 33.0 99.0 254 762

ßß W÷k} Modulus of Section

Designation Per Pile Per Wall
Width
Zx Zx
cm3 cm3/m

LSP-3B 57 171
68 204

P.27
 wõwÕ Innovative Products
}¶õû¶Ï¶}š¸ûÓ_|
Anti-viral, Anti-microbe, Anti-dust Waterborne Nano Coating
For Air Ducting
Ü{ýò×Û|~û÷϶}¶Ÿ|g_ýÿý¶kp}š¸ûÓwÖ}ÿnýóv
}ÏvŸÏ÷ÿomóvÞ 99% H1N1 õûnóÚÿwzoî}ۚ¸mý2
Developed by Wo Lee Green Solutions Limited, is an anti-microbe, anti-dust and anti-mould
coating, which applied on the inner surface of air ducting to reduce dust aggregation and to prevent the
growth of bacteria, virus (over 99% effective against H1N1 virus), mould and mildew that can cause stains
and odors inside air ducting.

é}ÿ_
Applications
Ñ|è÷Ûû¸ó1gÍ1š¸ûÓ
Metal Surfaces such as air ducting

nîy^۝
Test Reports Conducted
Nanoflow wÕÿšÞTËnîÿW1¶Ï1¶{ (BS476 Part 6&7)1VOCïÛÝÑ|
nî2wÕîåwö~n]×ßÑ~ÿsß_Ÿÿ2

Nanoflow has passed serveral tests including anti-mould test, anti-bacterial test, fire test (BS 476 Part 6 & 7), VOC
test and RoHS test. Nanoflow was also awarded gold medal in the Exhibition of Inventions Geneva.

þӃ
Project Reference

ß}}ï ќÓÞ\ - þû y|_y_ß^

Fu Shan Public Mortuary building Queensway Government Offices - ASD FEHD Skylight Market
P.28
kZ|_˜ý Modular Offsite Prefabrication

kZ|_˜ý
sQóߊýþ}ëýhÏÛþµo÷Û_ßÿ}2

þµo÷
Steel Frame
˜ýþý|˜Yý°ÿ‘rýwßÛ
ÝÿomOroÛf—2

Prefabricated parts are produced in warehouse

and installed on-site which can lower the cost
and saving the time.

þýÝÛ
Metal Art

{o}óßß3 kêö×z×
Dr Sun Yat-sen Historical Trail
Site of Yeung Ku-wan9s Assassination

{o}óßßúåÚ~]\öëÿþON2{o}óßßúwoN×ÿÞߙoçWoo
öwÞ2Ü{ýò×Ûß~ï~ýyӇwoÿúowóçWöûóûNVÛ2

oÝÛÕu¯ŠžÿóßrÛÝf}Þ[o2wÞ{‡N®þ}ëòýþ•ÿ2ÝÛ
Õ]ýýÝN‰nöÚ_ÿö‰èÔû¯Š öoÿÿesQ}NO]f—‡¯Š ß_o
YÿšÿÎëÝÛÕ^]ÿûövÿÛÿ2÷_òýøÿý÷íoß[ÿWîŸ
_1Wr1{ç1vý1ß×1ÕîßË{{2

Dr Sun Yat-sen Historical Trail is a sightseeing spot developed by Hong Kong Tourism Board. Tourists can experi-
ence the rich history and culture of the city. We are glad that Wo Lee Green Solution Ltd could participate in
this meaningful project and contribute to this cultural spot.

The artwork took 5 months from the design phase to installation. The production process was totally different
with general structural steel processing. Besides stricter requirement on craftsmanship, the artwork delivered the
designers9 vision and mission precisely to the audience. Hence, we spent lots of time to communicate with Mr.
Kacey Wong to fulfil his requirements and the concept of the artwork. Fabrication process included drilling,
cutting, welding, spray painting, galvanizing and quality assurance.

P.29
 kZ|_˜ý Modular Offsite Prefabrication
Modular Offsite Prefabrication
To meet the rising demand for modular construction, Wo Lee provides prefabrication and installation
services to customers. We are capable of providing tailor made structural steel such as steel frames
and hoarding system.

_ßÿ}
Modular Hoarding
Ü{ökZ_ßÿ}}Îûw}Ý
}þÿý|˜ýߑßwöÿû—}
ÿ}¿³ç2

Wo Lee Modular Hoarding System usage of

readily assembled components which are
prefabricated off site and later joined together on
site mainly by bolts and nuts. The concept of the
system takes advantages of allowing steel
members being fabricated off-site in authorized
Wo Lee fabrication center where productivity,
quality and safety can be better controlled.

Š°jWš
Custom Made Hollow Section
ÿ_röoßjWš
West Kowloon Xiqu Centre Oval Hollow Section
röoßÿ½ÿ_çWSwtÿoß•ÿ۞óö_ÿouwowۏNóÿ_÷
½ÎS~çWöröÝÛ2_Éw{N|ÿïNþó}o_ùúëÿÿý\Îó}‡
ÿïS}ÿúrös°Îßfïöõí2

wok•{{ö_¯Š_vÿþNþðVvWkq2ŒÜ{ýò×ÛñÍ\möâ
Û_žöþûÿrßúûvë~}ëÛ{_Üÿnúûvþ¯Š°jWö}ëûwÿ}ý
_vøÿ2

West Kowloon Xiqu Centre is located on the eastern edge of the West Kowloon. The building9s striking
design, was inspired by traditional Chinese lanterns and blends traditional and contemporary elements to
reflect the evolving nature of the art form.

The special design of the curtain wall was a great challenge aesthetically and structurally. Our technical team
tackled the structural problem successfully, and supplied tailor-made oval shape Hollow Section for the curtain
wall sections.
P.30
ûw Hollow Sections & Tubes

ñrß}ëýßþû D t

Hot Finished Structural Square Hollow Sections

B
{ÿ{þ European Standard EN 10210-2:2019
~û Ûþ ÿOÝß ~û Ûþ ÿOÝß
Size Thickness Mass per unit length Size Thickness Mass per unit length
DxB t DxB t
mm mm kg/m mm mm kg/m
30 x 30 3.0 2.47 6.3 30.1
8.0 37.6
3.2 3.61
160 x 160 10.0 46.3
40 x 40 4.0 4.39
12.5 56.6
5.0 5.28
16.0 70.2
3.2 4.62
4.0 5.64 5.0 27.3
50 x 50 6.3 34.0
5.0 6.85
6.3 8.31 8.0 42.7
180 x 180
10.0 52.5
3.2 5.62 12.5 64.4
4.0 6.90 16.0 80.2
60 x 60
5.0 8.42
6.3 10.3 5.0 30.4
6.3 38.0
3.2 6.63 8.0 47.7
4.0 8.15 200 x 200
10.0 58.8
70 x 70 5.0 9.99 12.5 72.3
6.3 12.3 16.0 90.3
8.0 15.0
6.3 47.9
3.2 7.63 8.0 60.3
4.0 9.41 250 x 250 10.0 74.5
80 x 80 5.0 11.6 12.5 91.9
6.3 14.2 16.0 115
8.0 17.5
6.3 57.8
4.0 10.7 8.0 72.8
5.0 13.1 300 x 300 10.0 90.2
90 x 90
6.3 16.2 12.5 112
8.0 20.1 16.0 141
4.0 11.9 8.0 85.4
5.0 14.7 10.0 106
6.3 18.2 350 x 350
100 x 100 12.5 131
8.0 22.6 16.0 166
10.0 27.4
12.5 33.0 10.0 122
12.5 151
5.0 17.8 400 x 400
16.0 191
6.3 22.2 20.0 235
120 x 120 8.0 27.6
10.0 33.7
12.5 40.9
5.0 22.6
6.3 28.1
8.0 35.1
150 x 150
10.0 43.1
12.5 52.7
16.0 65.2

P.31
 ûw Hollow Sections & Tubes
ñrß}ëÿßþû D
t

Hot Finished Structural Rectangular Hollow Sections

B
{ÿ{þ European Standard EN 10210-2:2019
~û Ûþ ÿOÝß ~û Ûþ ÿOÝß
Size Thickness Mass per unit length Size Thickness Mass per unit length
DxB t DxB t
mm mm kg/m mm mm kg/m
2.6 3.00 6.3 38.0
3.2 3.61 8.0 47.7
50 x 30
4.0 4.39 250 x 150 10.0 58.8
5.0 5.28 12.5 72.3
2.6 3.81 16.0 90.3
3.2 4.62 6.3 47.9
60 x 40 4.0 5.64 8.0 60.3
5.0 6.85 300 x 200 10.0 74.5
6.3 8.31 12.5 91.9
3.2 5.62 16.0 115
4.0 6.90 6.3 57.8
80 x 40 5.0 8.42 8.0 72.8
6.3 10.3 350 x 250 10.0 90.2
8.0 12.5 12.5 112
3.2 7.13 16.0 141
4.0 8.78 8.0 72.8
100 x 50 5.0 10.8 10.0 90.2
400 x 200
6.3 13.3 12.5 112
8.0 16.3 16.0 141
3.2 7.63 8.0 85.4
4.0 9.41 10.0 106
450 x 250
100 x 60 5.0 11.6 12.5 131
6.3 14.2 16.0 166
8.0 17.5 10.0 122
4.0 10.7 12.5 151
500 x 300
5.0 13.1 16.0 191
120 x 60 6.3 16.2 20.0 235
8.0 20.1
10.0 24.3
4.0 11.9
5.0 14.7
6.3 18.2
120 x 80
8.0 22.6
10.0 27.4
12.5 33.0
4.0 15.1
5.0 18.6
6.3 23.1
150 x 100
8.0 28.9
10.0 35.3
12.5 42.8
4.0 14.4
5.0 17.8
6.3 22.2
160 x 80
8.0 27.6
10.0 33.7
12.5 40.9
5.0 22.6
6.3 28.1
8.0 35.1
200 x 100
10.0 43.1
12.5 52.7
16.0 65.2

P.32
ûw Hollow Sections & Tubes
D

ñrß}ëWßþû
Hot Finished Structural Circular Hollow Sections
t
{ÿ{þ European Standard EN 10210-2:2019
~û Ûþ ÿOÝß ~û Ûþ ÿOÝß
Size Thickness Mass per unit length Size Thickness Mass per unit length
DxB t DxB t
mm mm kg/m mm mm kg/m
2.6 1.99 6.3 41.4
33.7 3.2 2.41 8.0 52.3
4.0 2.93 10.0 64.9
3.2 3.09 273.0 12.5 80.3
42.4 16.0 101
4.0 3.79
20.0 125
3.2 3.56 25.0 153
48.3 4.0 4.37
5.0 5.34 6.3 49.3
8.0 62.3
3.2 4.51 10.0 77.4
60.3 4.0 5.55 12.5 96.0
323.9
5.0 6.82 16.0 121
3.2 5.75 20.0 150
76.1 4.0 7.11 25.0 184
5.0 8.77
6.3 54.3
3.2 6.76 8.0 68.6
4.0 8.38 10.0 85.2
88.9
5.0 10.3 355.6 12.5 106
6.3 12.8 16.0 134
4.0 10.9 20.0 166
5.0 13.5 25.0 204
114.3 6.3 16.8 8.0 78.6
8.0 21.0 10.0 97.8
10.0 25.7 12.5 121
406.4
4.0 13.4 16.0 154
5.0 16.6 20.0 191
6.3 20.7 25.0 235
139.7
8.0 26.0 10.0 110
10.0 32.0 12.5 137
12.5 39.2 457.0 16.0 174
4.0 16.2 20.0 216
5.0 20.1 25.0 266
6.3 25.2 10.0 123
168.3
8.0 31.6 12.5 153
10.0 39.0 508.0 16.0 194
12.5 48.0 20.0 241
5.0 23.3 25.0 298
6.3 29.1
8.0 36.6
193.7
10.0 45.3
12.5 55.9
16.0 70.1
5.0 26.4
6.3 33.1
8.0 41.6
219.1
10.0 51.6
12.5 63.7
16.0 80.1
6.3 37.0
8.0 46.7
244.5 10.0 57.8
12.5 71.5
16.0 90.2

P.33
 ûw Hollow Sections & Tubes
D

WþÝû
Round Steel Tubes
t
{ÿ{þ European Standard EN 10255:2004 - Type L Series
Ÿ Type L Series
{ß Ýû_ß óû
Specified _ß O.D. ÿOÝß Mass (kg/m)
DN Thread Size
Outside g g_ Ûþ ½ o{
(mm) Diameter (inch) Max. Min. Thickness Plain End Threaded &
D (mm) D (mm) t (mm) Socketed
8 13.5 1/4 13.9 13.2 2.0 0.567 0.571
10 17.2 3/8 17.4 16.7 2.0 0.750 0.756
15 21.3 1/2 21.7 21.0 2.3 1.08 1.09
20 26.9 3/4 27.1 26.4 2.3 1.40 1.41
25 33.7 1 34.0 33.2 2.9 2.20 2.22
32 42.4 1-1/4 42.7 41.9 2.9 2.82 2.85
40 48.3 1-1/2 48.6 47.8 2.9 3.25 3.29
50 60.3 2 60.7 59.6 3.2 4.51 4.58
65 76.1 2-1/2 76.0 75.2 3.2 5.75 5.87
80 88.9 3 88.7 87.9 3.2 6.76 6.93
90 101.6 3-1/2 101.2 100.3 3.6 8.70 8.88
100 114.3 4 113.9 113.0 3.6 9.83 10.1
125 139.7 5 140.8 138.5 4.5 15.0 15.5
150 165.1 6 166.5 163.9 4.5 17.8 18.4

ŸNß Type L1 Series

{ß Ýû_ß óû
Specified _ß O.D. ÿOÝß Mass (kg/m)
DN Thread Size
Outside g g_ Ûþ ½ o{
(mm) Diameter (inch) Max. Min. Thickness Plain End Threaded &
D (mm) D (mm) t (mm) Socketed
8 13.5 1/4 13.9 13.2 2.0 0.570 0.574
10 17.2 3/8 17.4 16.7 2.0 0.742 0.748
15 21.3 1/2 21.7 21.0 2.3 1.08 1.09
20 26.9 3/4 27.1 26.4 2.3 1.39 1.40
25 33.7 1 34.0 33.2 2.9 2.20 2.22
32 42.4 1-1/4 42.7 41.9 2.9 2.82 2.85
40 48.3 1-1/2 48.6 47.8 2.9 3.24 3.28
50 60.3 2 60.7 59.6 3.2 4.49 4.56
65 76.1 2-1/2 76.3 75.2 3.2 5.73 5.85
80 88.9 3 89.4 87.9 3.6 7.55 7.72
100 114.3 4 114.9 113.0 4.0 10.8 11.1

ŸÎß Type L2 Series

{ß Ýû_ß óû
Specified _ß O.D. ÿOÝß Mass (kg/m)
DN Thread Size
Outside g g_ Ûþ ½ o{
(mm) Diameter (inch) Max. Min. Thickness Plain End Threaded &
D (mm) D (mm) t (mm) Socketed
8 13.5 1/4 13.6 13.2 1.8 0.515 0.519
10 17.2 3/8 17.1 16.7 1.8 0.670 0.676
15 21.3 1/2 21.4 21.0 2.0 0.947 0.956
20 26.9 3/4 26.9 26.4 2.3 1.38 1.39
25 33.7 1 33.8 33.2 2.6 1.98 2.00
32 42.4 1-1/4 42.5 41.9 2.6 2.54 2.57
40 48.3 1-1/2 48.4 47.8 2.9 3.23 3.27
50 60.3 2 60.2 59.6 2.9 4.08 4.15
65 76.1 2-1/2 76.0 75.2 3.2 5.71 5.83
80 88.9 3 88.7 87.9 3.2 6.72 6.89
100 114.3 4 113.9 113.0 3.6 9.75 10.0

P.34
ûw Hollow Sections & Tubes
D

WþÝû
Round Steel Tubes
t
{ÿ{þ European Standard EN 10255:2004 - Heavy & Medium Series
Ý Heavy Series
{ß Ýû_ß óû
Specified _ß O.D. ÿOÝß Mass (kg/m)
DN Thread Size
Outside g g_ Ûþ ½ o{
(mm) Diameter (inch) Max. Min. Thickness Plain End Threaded &
D (mm) D (mm) t (mm) Socketed
6 10.2 1/8 10.6 9.80 2.6 0.487 0.490
8 13.5 1/4 14.0 13.2 2.9 0.765 0.769
10 17.2 3/8 17.5 16.7 2.9 1.02 1.03
15 21.3 1/2 21.8 21.0 3.2 1.44 1.45
20 26.9 3/4 27.3 26.5 3.2 1.87 1.88
25 33.7 1 34.2 33.3 4.0 2.93 2.95
32 42.4 1-1/4 42.9 42.0 4.0 3.79 3.82
40 48.3 1-1/2 48.8 47.9 4.0 4.37 4.41
50 60.3 2 60.8 59.7 4.5 6.19 6.26
65 76.1 2-1/2 76.6 75.3 4.5 7.93 8.05
80 88.9 3 89.5 88.0 5.0 10.3 10.5
100 114.3 4 115.0 113.1 5.4 14.5 14.8
125 139.7 5 140.8 138.5 5.4 17.9 18.4
150 165.1 6 166.5 163.9 5.4 21.3 21.9

o Medium Series
{ß Ýû_ß óû
Specified _ß O.D. ÿOÝß Mass (kg/m)
DN Thread Size
Outside g g_ Ûþ ½ o{
(mm) Diameter (inch) Max. Min. Thickness Plain End Threaded &
D (mm) D (mm) t (mm) Socketed
6 10.2 1/8 10.6 9.80 2.0 0.404 0.407
8 13.5 1/4 14.0 13.2 2.3 0.641 0.645
10 17.2 3/8 17.5 16.7 2.3 0.839 0.845
15 21.3 1/2 21.8 21.0 2.6 1.21 1.22
20 26.9 3/4 27.3 26.5 2.6 1.56 1.57
25 33.7 1 34.2 33.3 3.2 2.41 2.43
32 42.4 1-1/4 42.9 42.0 3.2 3.10 3.13
40 48.3 1-1/2 48.8 47.9 3.2 3.56 3.60
50 60.3 2 60.8 59.7 3.6 5.03 5.10
65 76.1 2-1/2 76.6 75.3 3.6 6.42 6.54
80 88.9 3 89.5 88.0 4.0 8.36 8.53
100 114.3 4 115.0 113.1 4.5 12.2 12.5
125 139.7 5 140.8 138.5 5.0 16.6 17.1
150 165.1 6 166.5 163.9 5.0 19.8 20.4

P.35
 w Plates
ñÏþ
Hot Rolled Steel Plates
_Ÿ{þ International Standard
ÿOÝß ~û Size (mm)
Unit Weight
(S[/þ) 914 x 1829 914 x 2134 1219 x 2438 1524 x 3048 1524 x 6096 1829 x 6096 2438 x 6096 2500 x 6096
(kg/sh) (32
x 62) (32
x 72) (42
x 82) (52
x 102) (52
x 202) (62
x 202) (82
x 202)

1.2 15.75 18.37 28.00

1.4 32.66
1.5 19.68 22.97 34.99 54.70
1.6 21.00 24.50 37.33 58.34
1.8 41.99
2.0 26.25 30.62 46.66 72.93
2.3 30.18 35.22 53.66
2.5 32.81 38.28 58.32 91.16
2.8 65.32 102.10
3.0 39.37 45.93 69.99 109.39 218.79
4.0 93.32 145.86 291.72
4.5 59.05 104.98 164.09 328.18
5.0 116.65 182.32 364.64
5.8 135.31
6.0 78.74 139.98 218.79 437.57 525.15 700.00
8.0 186.64 291.72 583.43 700.19 933.34
9.0 209.97 328.18 656.36
Ûþ Thickness (mm)

10 233.30 364.64 729.29 875.24 1166.67

12 157.47 279.96 437.57 875.15 1050.29 1400.00
15 349.94 1750.01
16 373.27 583.43 1166.86 1400.39 1866.67 1914.14
19 443.26 2216.67
20 466.59 729.29 1458.58 1750.48 2333.34 2392.68
22 513.25 2566.68
25 583.24 2188.11 2916.68 2990.85
30 699.89 2625.73 3500.01 3589.02
32 746.55 3733.35
35 816.54 4083.35
38 886.52 4433.35
40 933.18 3500.97 4666.68 4785.36
45 1049.83 3938.59 5250.02
50 1166.48 4376.21 5833.35
55 6416.69
60 1399.78 7000.02 7178.04
65 1516.42 7583.36
70 8166.70
75 8750.03
80 9333.37
100 8752.42 11666.71

ۗwÞ~ûÿmËçê Please contact us for other size enquiry

P.36
w Plates

³þµ
Steel Chequered Plates
_Ÿ{þ International Standard
ÿOÝß ~û Size (mm)
Unit Weight
(S[/þ) 1219 x 2438 1524 x 3048
(kg/sh) (42
x 82) (52
x 102)

2.6 67.00 104.78

2.8 72.60 113.47
3.0 75.10 117.38
Ûþ Thickness (mm)

4.0 100.52 157.11

4.5 111.20 173.81
5.8 142.60 222.89
6.0 146.22 228.54
8.0 193.92 303.10
9.0 217.20 339.49
10.0 241.12 376.87
12.0 285.10 445.61
ûßӃ For reference only

ñß×þw
Continuously Hot-Dip Zinc Coated Steel Sheets
{ÿ{þ European Standard EN 10346:2015
ÿOÝß ~û Size (mm)
Unit Weight
(S[/þ) 914 x 1829 1219 x 2438
(kg/sh) (32
x 62) (42
x 82)

0.55 7.15 12.70

0.60 7.80 13.87
0.70 9.11 16.20
0.80 10.42 18.53
0.90 11.81 21.00
Ûþ Thickness (mm)

1.00 13.05 23.20

1.10 14.36 25.54
1.20 15.68 27.87
1.40 18.30 32.53
1.50 19.68 34.87
1.60 20.90 37.17
2.00 26.16 46.53
2.30 30.81 54.80
3.00 39.37 70.00
4.00 53.14 94.50
4.50 59.60 106.00
ûßӃ For reference only

P.37
 w Plates
ñß×þw
Continuously Hot-Dip Zinc Coated Steel Sheets
×|Ýß Coating Masses
y÷Šg]×|Ýß ÿ÷ŠÿÞvÞ×|Ûþ
×|ïß Theoretical guidance values for coating thickness ×|ßþ÷
Minimum coating mass total both surfaces
Coating per surface in the single spot test Density
(g/m2 )
Designation (μm) (g/cm3 )
Triple Spot Test Single Spot Test Typical Value Range
Z140 140 120 10 7 to15
Z200 200 170 14 10 to 20
Z225 7.1
225 195 16 11 to 22
Z275 275 235 20 13 to 27
Other coating designation can be negotiated with the mill.

W{rV Chemical Composition

ßß Oý Maximum (%)
Designation
C Si Mn P S Ti
DX51D 0.18 0.50 1.20 0.12 0.045 0.30
DX52D 0.12 0.50 0.60 0.10 0.045 0.30
DX53D 0.12 0.50 0.60 0.10 0.045 0.30
Chemical compositions can be negotiated with the mill in case of steel grades expect for DX51D.

øgý Mechanical Properties

\oþ ÷ëþ þ÷
ßß
Yield Strength Tensile Strength Elongation
Designation
(Mpa) (Mpa) O]ý Min. (%)
DX51D - 270 to 500 22
DX52D 140 to 300 270 to 420 26
DX53D 140 to 260 270 to 380 30

*Other mechanical properties can be negotiated with the mill.

ÿß×þw
Electrolytic Zinc - Coated Steel Sheets
åo{þ Japanese Standard JIS G3313
ÿOÝß ~û Size (mm)
Unit Weight
(S[/þ) 914 x 1829 1219 x 2438 1524 x 3048
(kg/sh) (32
x 62) (42
x 82) (52
x 102)

0.50 6.62 11.77 18.40

0.60 7.93 14.10 22.05
0.70 9.25 16.44 25.69
Ûþ Thickness (mm)

0.80 10.56 18.77 29.34

0.90 11.87 21.10 32.99
1.00 13.18 23.44 36.63
1.10 14.50 25.77 40.28
1.20 15.81 28.10 43.92
1.50 19.74 35.10 54.86
1.60 21.06 37.43 58.51
1.90 24.99 44.43 69.45
2.00 26.31 46.77 73.10
ûßӃ For reference only

P.38
w Plates

øþ
Abrasion Resistant Steel Plates
ABREX 450 / EVERHARD - C450 ABREX 500 / EVERHARD - C500
þý{þ Mill Standard þý{þ Mill Standard
ÿOÝß ~û Size (mm) ÿOÝß ~û Size (mm)
Unit Weight Unit Weight
(S[/þ) 1524 x 6096 (S[/þ)
2032 x 6096
(kg/sh) (52
x 202) (kg/sh)

5.0 364.64 5.0 486.19

6.0 437.57 6.0 583.43

ûßӃ For reference only ûßӃ For reference only

_o|þ Brinell Hardness (HBW)

ßß |þ ÿ_
Designation Hardness Range

ABREX 450 450 410 to 490

ABREX 500 500 450 to 550

EVERHARD - C450 450 425 to 475

EVERHARD - C500 500 460 to 540

W{rV Chemical Composition

W{rV Chemical Composition (%)
ßß
Designation Pcm
C Si Mn P S Ni Cr Mo B
t ≤ 25 t > 25

ABREX 450 ≤ 0.23 ≤ 1.20 ≤2.00 ≤ 0.025 ≤ 0.010 ≤ 1.00 ≤ 1.20 ≤ 0.60 ≤ 0.005 ≤ 0.36 ≤ 0.36

ABREX 500 ≤ 0.35 ≤ 1.20 ≤2.00 ≤ 0.015 ≤ 0.010 ≤ 1.00 ≤ 1.20 ≤ 0.60 ≤ 0.005 ≤ 0.42 ≤ 0.42

EVERHARD -
≤ 0.25 ≤ 0.55 ≤ 1.60 ≤ 0.030 ≤ 0.030 - ≤ 0.80 - ≤ 0.004 - -
C450
EVERHARD - -
≤ 0.30 ≤ 0.55 ≤ 1.60 ≤ 0.030 ≤ 0.030 - ≤ 0.80 - ≤ 0.004 -
C500

ûßӃ For reference only

P.39
 w Plates
}þ÷v\¶{
DURASTEEL®
N~}öþý|íÜþ\þûwý
A Durable Fibre Cement and Steel Componsite Building Material
Ýß(é|÷)
Ûþ®ÿ ÷þ®ÿ ÿþ®ÿ
~û Size Nominal Board Weights
Thickness Tolerance Length Tolerance Width Tolerance
at Ambient Conditions

DURASTEEL 6.0mm
1200x2400mm 16.8 kg/m +1.5 to - 0.0 mm +2.0 to -2.0 mm +2.0 to -2.0 mm
/1200x2500mm
DURASTEEL 9.5mm
1200 x 2400mm 21.0 kg/m +1.0 to -1.0 mm +2.0 to -2.0 mm +2.0 to -2.0 mm
/1200 x 2500mm

÷_þ ÷_þ _gkß ÷Ýînß ÷Ýîþ

øgý Impact Strength
Flexural Strength Flexural Strength Flexural Modulus Impact Resistance
Mechanical (BS 5669: Part 1/ 1500mm
(BS5669 Part1: 1989) (BS EN 12467:2000) (BS EN 12467:2000) (Projectile)
Drop)
DURASTEEL 6.0mm
1200x2400mm >189.5 N/mm2 (UDL load) 109 Mpa (Point Load) 55 Gpa (Point Load) No Failure 2793 J
/1200x2500mm
DURASTEEL 9.5mm
1200 x 2400mm >189.5 N/mm2 (UDL load) 84 Mpa (Point Load) 40 Gpa (Point Load) No Failure 2793 J
/1200 x 2500mm

|ÿ÷ oÿþ]g oÿþ]g

yw|ÿ|ß |ßg
|ÿ Moisture Absorption Moisture Movement Moisture Movement
Natural Moisture Content Watertightness
Moisture (Weight from Normal (35~85%RH) (65%RH to saturated)
by Weight (BS 4624:1981)
Moisture Content) (BS EN 318:2002) (BS EN 318:2002)
DURASTEEL 6.0mm
1200x2400mm 6% 6~7% ≤ 0.2% ≤ 0.2% Pass
/1200x2500mm
DURASTEEL 9.5mm
1200 x 2400mm 6% 6~7% ≤ 0.2% ≤ 0.2% Pass
/1200 x 2500mm

ñ©¹ÿ} gÚ³þÛ_ïþ
ñß ñó^÷
Coefficient of Thermal Expansion Maximum Continuous Operting
Thermal Thermal Conductivity at 20oC
(BS 1902:1990) Temperature
(ASTM C518:1991)
(BS 7346:Part 2:1990)
DURASTEEL 6.0mm
1200x2400mm *** *** 350o C
/1200x2500mm
DURASTEEL 9.5mm
1200 x 2400mm 0.129 W/mo K 15 x 10-6k-1 350o C
/1200 x 2500mm

}í24_fßö{g ßwóg
{q ñ¿\] þûÏVÞ
Fire Resistance After 24 Hours ò÷øÏ} (BS 476 : Part 4 : 1970)
Fire Water Immerion
Radiant Heat Reduction Building Regulations
Sound Reducation Index Non-Combustible
(BS 476 Part 24 : 1987) Through Panel Classification
(BS 476 : Part 4 : 1970)
DURASTEEL 6.0mm
9.30-2.53
1200 x 2400mm *** 28.0 dB Yes Class 0
(2948.0-802.0 Btu/ft hoF)
/1200 x 2500mm
DURASTEEL 9.5mm
9.30-2.53
1200 x 2400mm Satisfactory 29.7 dB Yes Class 0
(2948.0-802.0 Btu/ft hoF)
/1200 x 2500mm

{q {qöè÷óí
Fire Spread of Flame
(BS 476 : part 7 : 1987)

DURASTEEL 6.0mm
1200 x 2400mm Class 1
/1200 x 2500mm
DURASTEEL 9.5mm
1200 x 2400mm Class 1
/1200 x 2500mm P.40
w Plates
w Plates

Supalux }ù³
Supalux - Intumex

Ûþ ~û Ýß ßþ
Thickness Size Weight Per Sheet Density

9mm 2440mm x 1220mm 29 kg

12mm 2440mm x 1220mm 39 kg
15mm 2440mm x 1220mm 49 kg } 975 kg/m3
20mm 2440mm x 1220mm 65 kg
25mm 2440mm x 1220mm 82 kg

N®âÛ}þ
General Technical Data

÷_þ U Longitudinal : 10 N/mm2

Flexual Strength (BS 4624) kU Transverse : 7 N/mm2

_gkß U Longitudinal : 4.1 KN/mm2

Modulus of Elasticity (BS 4624) kU Transverse : 4.0 KN/mm2

ñó^÷
0.242 W/moK
Thermal Conductivity

è÷þþ pH12
Surface Alkalinity

è÷òí Front Face Smooth

Surface Condition Back Face Sanded

¶{gý
Non-combustible
Fire Performace (BS476: Part 4)
è÷{ò—þ
Surface Spread of Flame Class O
(BS476: Part 7)
|Vß
} 6%
Normal Moisture Content

P.23
P.41
 Ów Aluminium Products
Ów
Aluminium Plates
Ó Aluminium Plates ³Ó Aluminium Chequered Plates
{ÿ{þ European Standard EN485 {ÿ{þ European Standard EN1386
ÿOÝß ~û Size (mm) ÿOÝß ~û Size (mm)
Unit Weight Unit Weight
(S[/þ) 1219 x 2438 (S[/þ) 1219 x 2438
(kg/sh) (42
x 82) (kg/sh) (42
x 82)

0.6 4.38 1.0 9.37

0.8 6.45 1.2 10.22
1.0 8.05 1.5 13.49
1.2 9.66 2.0 18.00
1.5 12.08 2.5 22.50
2.0 16.11 3.0 25.00
2.5 20.10 4.2 36.50
3.0 24.16 5.2 44.60
4.0 32.20 6.0 50.00
4.5 36.30
ûßӃ For reference only
6.0 48.32
ûßӃ For reference only

Óßw
Aluminium Sections t

Óc Aluminium Flat Bars B

{ÿ{þ European Standard EN755

ÿOÝß Ûþ Thickness t (mm)
Unit Weight
(S[/)
3.0 4.0 5.0 6.0 8.0 10.0
(kg/m)
12 0.097 0.130 0.162 0.194 0.259 0.324
16 0.130 0.173 0.216 0.259 0.346 0.432
ÿþ Width B (mm)

20 0.162 0.216 0.270 0.324 0.432 0.540

25 0.203 0.270 0.338 0.405 0.540 0.675
30 0.243 0.324 0.405 0.486 0.648 0.810
32 0.259 0.346 0.432 0.518 0.691 0.864
38 0.308 0.410 0.513 0.616 0.821 1.026
40 0.324 0.432 0.540 0.648 0.864 1.080
50 0.405 0.540 0.675 0.810 1.080 1.350
71 0.575 0.767 0.959 1.150 1.534 1.917
100 0.810 1.080 1.350 1.620 2.160 2.700
ûßӃ For reference only

P.42
Ów Aluminium Products
Óýû Aluminium Square Hollow Sections
{ÿ{þ European Standard EN755

~û Ûþ ÿOÝß ~û Ûþ ÿOÝß
Size Thickness Mass per unit Size Thickness Mass per unit
DxB t length DxB t length
t

mm mm kg/m mm mm kg/m D

2.0 0.517 3.0 1.203

25 x 25 40 x 40
3.0 0.716 4.0 1.556
B
30 x 30 2.0 0.598 2.0 1.093
50 x 50
32 x 32 2.5 0.803 3.0 1.567
38 x 38 2.0 0.787

ûßӃ For reference only

Ócû Aluminium Rectangular Hollow Sections

{ÿ{þ European Standard EN755
~û Ûþ ÿOÝß ~û Ûþ ÿOÝß
Size Thickness Mass per unit Size Thickness Mass per unit
DxB t length DxB t length t

D
mm mm kg/m mm mm kg/m

1.2 0.509 75 x 50 3.0 2.188

50 x 25 2.0 0.793 2.0 1.606 B
3.0 1.149 100 x 50 2.5 2.025
1.3 0.687 4.0 3.117
75 x 25
2.1 1.130

ûßӃ For reference only

ÓÛ Aluminium Angles
{ÿ{þ European Standard EN755
~û Ûþ ÿOÝß ~û Ûþ ÿOÝß
Size Thickness Mass per unit Size Thickness Mass per unit
t
DxB t length DxB t length
D
mm mm kg/m mm mm kg/m t

2.0 0.260 3.0 0.802

25 x 25
3.0 0.393 50 x 50 5.0 1.322 B

1.5 0.257 6.0 1.523

30 x 30 2.0 0.314
3.0 0.488
3.0 0.659
40 x 40
5.0 1.016

ûßӃ For reference only

Óý Aluminium Channels
{ÿ{þ European Standard EN755
~û Ûþ ÿOÝß
Size Thickness Mass per unit
t
DxB t length
D

mm mm kg/m t

100 x 50 4.5 2.323 B

ûßӃ For reference only

*ïNT_Ówÿ_owÞ~ûÞòÿkÏõÿçê2
Other sizes shall be added in time for the above Aluminium Products.
P.43
 þw| Steel Specifications
o_{þ
Chinese Standard (Gou Biu)
GB/T 1591-2018
O\ÑÚþ}ëþ High Strength Low Alloy Structural Steels
~ß Designation W{rVÿîßV}Ā Chemical Composition (%)

ûCa C ÿSi Si ³MnMn ÿPc P {Sc S ¾NbNb

d
ùVe V ¶TieTi

îß }{Ûþ/öß
þ { Thickness / Diameter
Grade Quality (mm)
Oý
Oý
Not more
Max. than
Grade
Level ≤≤ 40
40b > 40
Oý
Oý
Not much
Max. than
B 0.24 0.035 0.035
Q355 C 0.20 0.22 0.55 1.60 0.030 0.030 - - -
D 0.20 0.22 0.025 0.025
B 0.035 0.035
Q390 C 0.20 0.55 1.70 0.030 0.030 0.05 0.13 0.05
D 0.025 0.025
B 0.035 0.035
Q420
Q420g 0.20 0.55 1.70 0.05 0.13 0.05
C 0.030 0.030
Q460
Q460g C 0.20 0.55 1.80 0.030 0.030 0.05 0.13 0.05

~ß Designation W{rVÿîßV}Ā Chemical Composition (%)

ûCrCr ³NiNi —CuCu þMoMo nNfN |B B

îß
þ {
Grade Quality Oý Not more
Oý Max. than
Grade
Level

B
0.012
Q355 C 0.30 0.30 0.40 - -
D -
B
Q390 C 0.30 0.50 0.40 0.10 0.015 -
D
B
Q420
Q420g 0.30 0.80 0.40 0.20 0.015 -
C
Q460g
Q460 C 0.30 0.80 0.40 0.20 0.015 0.004

P.44
þw| Steel Specifications

o_{þ
Chinese Standard (Gou Biu)
GB/T 1591-2018
O\ÑÚþ}ëþ High Strength Low Alloy Structural Steels
ûwß CEVÿîßV}Ā(%)
~ß Designation
Oý
OýNot more
Max. than

þ îß{ }{Ûþ/ößThickness
}{Ûþ/öß Thickness(t)/ Diameter (mm)(mm)
/ Diameter
Grade Quality
Quality Grade
Level
t≤≤30
30 30> <30~63
t ≤ 63 63> <63~150 > 150~250
t ≤ 150 150 > 250~400
< t ≤ 250 250 < t ≤ 400
B
-
Q355
Q355a C 0.45 0.47 0.47 0.49
0.49b
D 0.49c
B
Q390 C 0.45 0.47 0.48 - -
D
B
Q420
Q420d 0.45 0.47 0.48 0.49b
0.49 -
C
Q460
Q460d C 0.47 0.49 0.49 - -

\oþ
N\oþ
Yield Strength
ReHa / RMP a/ MPa
~ß Designation eH
O_ýO_ý Not more
Min. than

þ îß{ }{Ûþ/ößThickness
}{Ûþ/öß Thickness(t)/ Diameter (mm)(mm)
/ Diameter
Grade Quality Grade
Quality Level
t≤≤16
16 > <16~40
16 t ≤ 40 40> <40~63
t ≤ 63 63> <63~80
t ≤ 80 80> <80~100 > 100~150
t ≤ 100 100 > 150~200
< t ≤ 150 150 > 200~250
< t ≤ 200 200 > 250~400
< t ≤ 250 250 < t ≤ 400
B
-
Q355 C 355 345 335 325 315 295 285 275
D 265
265b
B
Q390 C 390 380 360 340 340 320 - - -
D
B
Q420c 420 410 390 370 370 350 - - -
C
Q460c C 460 450 430 410 410 390 - - -

~ß Designation ÷ëþ
÷ëþ
Tensile Strength
Rm / MPRa m / MPa

þ îß{ }{Ûþ/öß
}{Ûþ/ößThickness
Thickness (t)/ /Diameter
Diameter (mm)
(mm)
Grade Quality Grade
Quality Level
t≤≤ 100
100 100 < t ≤ 150 150
> 100~150 < t ≤ 250 250
> 150~250 < t ≤ 400
> 250~400
B
-
Q355 C 470~630 450~600 450~600
D 450~600
450~600b
B
Q390 C 490~650 470~620 - -
D
B
Q420c 520~680 500~650 - -
C
Q460c C 550~720 530~700 - -

P.45
 þw| Steel Specifications
o_{þ
Chinese Standard (Gou Biu)
GB/T 1591-2018
O\ÑÚþ}ëþ High Strength Low Alloy Structural Steels
÷ß÷÷
N\oþ Elongation
ReHa / MPA/%
a
~ß Designation
O_ý
O_ý Min. than
Not more

þ îß{ }{Ûþ/öß Thickness / Diameter (mm)

þ îß{
Quality Level
Grade
Grade Quality Grade ≤ 16îkýU
Position of Test Pieces >t 40~63
≤ 40 > <63~80
40 t 63 63> <80~100
≤ > 100~150
t 100 100
≤ > 150~200
< t 150 150 > 200~250
< t 250 250
≤ < t 400
≤ ≤

B U Longitudinal 22 21 20 18 17 17
Q355 C
D kU Transverse 20 19 18 18 17 17

B U Longitudinal 21 20 20 19 - -
Q390 C
D kU Transverse 20 19 19 18 - -
B
Q420c U
420 Longitudinal 390
20 370
19 370
19 350
19 - -
C
Q460c C U
460 Longitudinal 18 17 17 17 - -

ïOîßïþÜÝî|wýßg_|KV N\oþ ReH2a // JMPa

~ß Designation
O_ý Not
Test Temperature and Min. Impact Absorption moreKVthan
Energy 2 / J

≤ 16 20 oC 0 oC -20 oC
þ îß{
þ îß{
Grade Quality Level ≤ 16
U > kU
16~40 ≤ 16
U > kU
16~40 U > kU
16~40
Grade Quality Grade
Longitudinal Transverse Longitudinal Transverse Longitudinal Transverse
Q355
Q390
Q355 B 355
34 27 - - - -
Q420
Q355
Q390 -
390 380
- 360
34 340
27 340
- 320
-
Q390 C
Q420
Q460
Q355 B
Q420c D -
420 410
- 390
- 370
- 370
34 350
27
Q390 C

P.46
þw| Steel Specifications

o_{þ
Chinese Standard (Gou Biu)
GB/T 700:2006
û}}ëþ Carbon Structural Steels
\oþ þ÷ Elongation
Yield Strength Lo = 5.65:So
{ O_ý Min.(N/mm2) ÷ëþ O_ý Min.(%)
Grade
þ Tensile Strength
Grade Ûþ Thickness (t) (N/mm2) Ûþ Thickness (t)

t ≤ 16 16 < t ≤ 40 40 < t ≤ 60 60 < t ≤ 100 > 100~150

t ≤ 40 40 < t ≤ 60 60 < t ≤ 100
> 150~200
Q215A 215 205 195 185 335-450 31 30 29
Q215B
Q355 215 205 195 185 335-450 31 30 29
Q235A 235 225 215 215 375-500 26 25 24
Q235B
Q390 235 225 215 215 375-500 26 25 24
Q235C 235 225 215 215 375-500 26 25 24
Q235D 235 225 215 215 375-500 26 25 24
Q275A 275 265 255 245 410-540 22 21 20
Q275B 390
275 370
265 370
255 370
245 410-540 22
350 21
- 20
-
Q275C 275 265 255 245 410-540 22 21 20
Q275D 275 265 255 245 410-540 22 21 20

W{rV Ýîîß
Chemical Composition Impact Test
{ Oý Max.(%) O]ý Min.
Grade
þ
ïþ ýß
Grade û ÿ ³ ÿ {
P Temp Energy
C Si Mn P S
(2C) (J)

Q215A 0.15 0.35 1.2 0.045 0.050 N/A N/A

Q215B
Q355 0.15 0.35 1.2 0.045 0.045 20 27
Q235A 0.22 0.35 1.4 0.045 0.050 N/A N/A
Q235B
Q390 0.20 0.35 1.4 0.045 0.045 20 27
Q235C 0.17 0.35 1.4 0.040 0.040 0 27
Q235D 0.17 0.35 1.4 0.035 0.035 -20 27
Q275A 0.24 0.35 1.5 0.045 0.050 N/A N/A
Q275B 390
0.21 0.35 1.5 0.045 0.045 20 27
Q275C 0.20 0.35 1.5 0.040 0.040 0 27
Q275D 0.20 0.35 1.5 0.035 0.035 -20 27

P.47
 þw| Steel Specification
{ÿ{þ
European Standard
BS EN 10210-1:2006
ñrßÿvþß\Ñ}ëþû
Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Steels
÷ëþ
\oþ Yield Strength þ÷ Elongation
Tensile Strength
O_ý Min. (N/mm2) O]ý Min. (%)
{ (N/mm2)
Grade Ûþ Thickness (t)
> 16 > 40 > 63 > 80 >100 >3 >100 > 40 > 63 >100
t ≤ 16 ≤ 63 ≤120
t ≤3 t ≤ 40 ≤ 63 ≤100
≤ 40 ≤ 80 ≤100 ≤100 ≤120 ≤120

S 275 J0H 275 265 255 245 235 225 430-580 410-560 400-540 23 22 21 19
S 275 J2H 275 265 255 245 235 225 430-580 410-560 400-540 23 22 21 19
S 355 J0H 355 345 355 325 315 295 510-680 470-630 450-600 22 21 20 18
S 355 J2H 355 345 355 325 315 295 510-680 470-630 450-600 22 21 20 18

W{rÿ Chemical Composition Ýîîß ûwß|

Oý Max. (%) Impact Test Carbon Equivalent Value
{
ûC Ûþ Thickness (t)
Grade ïþ ýß
Ûþ Thickness (t) ÿ ³ ÿ { n Energy
Temp > 16 > 40 > 65
Si Mn P S N (#) (J) t ≤ 16
> 40 O]ýMin. ≤ 40 ≤65 ≤120
t ≤ 40
120
S 275 J0H 0.20 0.22 N/A 1.50 0.035 0.035 0.009 0 27 0.41 0.43 0.45 0.48
S 275 J2H 0.20 0.22 N/A 1.50 0.030 0.030 N/A -20 27 0.41 0.43 0.45 0.48
S 355 J0H 0.22 0.22 0.55 1.60 0.035 0.035 0.009 0 27 0.45 0.47 0.50 0.53
S 355 J2H 0.22 0.22 0.55 1.60 0.030 0.030 N/A -20 27 0.45 0.47 0.50 0.53

BS EN 10219-1:2006
÷rßÿvþß\Ñ}ëþû
Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels
\oþ Yield Strength ÷ëþ þ÷ Elongation
Tensile Strength Ýîîß Impact Test
O_ý Min. (N/mm2) O]ý Min. (%)
{ (N/mm2)
Grade Ûþ Thickness (t) ýß
ïþ Energy (J)
>16 >3 Temp
t ≤16 t <3 t ≤ 40 (#) O]ý Min.
≤40 ≤ 40

S 275 J0H 275 265 430-580 410-560 20 0 27

S 275 J2H 275 265 430-580 410-560 20 -20 27
S 355 J0H 355 345 510-680 470-630 20 0 27
S 355 J2H 355 345 510-680 470-630 20 -20 27

W{rÿ Chemical Coposition ûßw|

{ Oý Max. (%) Carbon Equivalent Value
Grade û ÿ ³ ÿ { n
Ûþ Thickness ≤ 40mm
C Si Mn P S N

S 275 J0H 0.20 N/A 1.50 0.035 0.035 0.009 0.40

S 275 J2H 0.20 N/A 1.50 0.030 0.030 N/A 0.40
S 355 J0H 0.22 0.55 1.60 0.035 0.035 0.009 0.45
S 355 J2H 0.22 0.55 1.60 0.030 0.030 N/A 0.45
P.48
þw| Steel Specification

{ÿ{þ
European Standard
BS EN 10025-2:2019
ß\Ñ}ëþî¬âÛýþ
Technical Delivery Conditions For Non-alloy Structural Steels

û % O[ý
C in % max. for nominal product ÿ Si ³ Mn ÿP {S nN — Cu
{ thickness in mm % % % % % %
Grade Oý Oý Oý Oý Oý Oý
max max max max max max
t ≤ 16 16 < t ≤ 40 t > 40

S235JR 0.17 0.17 0.20 - 1.40 0.035 0.035 0.012 0.55

S235J0 0.17 0.17 0.17 - 1.40 0.030 0.030 0.012 0.55
S235J2 0.17 0.17 0.17 - 1.40 0.025 0.025 - 0.55
S275JR 0.21 0.21 0.22 - 1.50 0.035 0.035 0.012 0.55
S275J0 0.18 0.18 0.18 - 1.50 0.030 0.030 0.012 0.55
S275J2 0.18 0.18 0.18 - 1.50 0.025 0.025 - 0.55
S355JR 0.24 0.24 0.24 0.55 1.60 0.035 0.035 0.012 0.55
S355J0 0.20 0.20 0.22 0.55 1.60 0.030 0.030 0.012 0.55
S355J2 0.20 0.20 0.22 0.55 1.60 0.025 0.025 - 0.55

S460JR* 0.20 0.20 0.22 0.55 1.70 0.030 0.030 0.025 0.55
S460J0* 0.20 0.20 0.22 0.55 1.70 0.030 0.030 0.025 0.55
S460J2* 0.20 0.20 0.22 0.55 1.70 0.030 0.030 0.025 0.55

S500J0* 0.20 0.20 0.22 0.55 1.70 0.030 0.030 0.025 0.55

*ûù}ýßw Applicable For Long Products Only

ûwß| % O[ý
{ Maximum CEV in % for nominal product thickness in mm
Grade
t ≤ 30 30 < t ≤ 40 40 < t ≤ 150 150 < t ≤ 250 250 < t ≤ 400

S235JR
S235J0 0.35 0.35 0.38 0.40 0.40
S235J2
S275JR
S275J0 0.40 0.40 0.42 0.44 0.44
S275J2
S355JR
S355J0 0.45 0.47 0.47 0.49 0.49
S355J2
S460JR*
S460J0* 0.47 0.49 0.49 - -
S460J2*
S500J0* 0.49 0.49 0.49 - -

*ûù}ýßw Applicable For Long Products Only

P.49
 þw| Steel Specification
{ÿ{þ
European Standard
BS EN 10025-2:2019
ß\Ñ}ëþî¬âÛýþ
Technical Delivery Conditions For Non-alloy Structural Steels

ÝîîßýßÿO_ýĀ
Minimum energy!"#!$ (J)
{ ïþ Nominal thickness in mm
Grade Temperature
#
t ≤150 150 < t ≤ 250 250 < t ≤ 400

S235JR 20 27 27 27
S235J0 0 27 27 27
S235J2 -20 27 27 27
S275JR 20 27 27 27
S275J0 0 27 27 27
S275J2 -20 27 27 27
S355JR 20 27 27 27
S355J0 0 27 27 27
S355J2 -20 27 27 27
S460JR* 20 27 - -
S460J0* 0 27 - -
S460J2* -20 27 - -
S500J0* 0 27 - -

*ûù}ýßw Applicable For Long Products Only

P.50
þw| Steel Specification

{ÿ{þ
European Standard
BS EN 10025-2:2019
ß\Ñ}ëþî¬âÛýþ
Technical Delivery Conditions For Non-alloy Structural Steels
\oþ Yield Strength ReH MPa
÷ëþ Tensile Strength Rm MPa
O_ý Min.
Nominal Thickness (t)
{ Nominal Thickness (t)
mm
Grade mm

t ≤ 16 16 < t ≤ 40 40 < t ≤ 63 63 < t ≤ 80 80 < t ≤100 t<3 3 < t ≤100 100 < t ≤ 150

S235JR
S235J0 235 225 215 215 215 360-510 360-510 350-500
S235J2

S275JR
S275J0 275 265 255 245 235 430-580 410-560 400-540
S275J2

S355JR
S355J0 355 345 335 325 315 510-680 470-630 450-600
S355J2

S460JR*
S460J0* 460 440 420 400 390 - 550-720 530-700
S460J2*

S500J0* 500 480 460 450 450 - 580-760 560-750

÷ßþ÷
Minimum Percentage Elongation After Fracture
{ %
Grade îþnîýU L0 = 5,65 :So
Orientation of Test Pieces Nominal Thickness (t)
mm

Steel Name 3 ≤ t ≤ 40 40 ≤ t ≤ 63 633 ≤ t ≤ 100

S235JR
U Longitudinal 26 25 24
S235J0
kU Transverse 24 23 22
S235J2

S275JR
U Longitudinal 23 22 21
S275J0
kU Transverse 21 20 19
S275J2

S355JR
U Longitudinal 22 21 20
S355J0
kU Transverse 20 19 18
S355J2

S460JR*
S460J0* U Longitudinal 17 17 17
S460J2*

S500J0* U Longitudinal 15 15 15

*ûù}ýßw Applicable For Long Products Only

P.51
 gõíoË}o
For More Information Please Visit

www.wolee.com
võÿ Or Call

2393 0131

Whatsapp ÿï
Wechat
 1 ߯Ï×

_ŸÛԚßß81-87ßN{
ÿûÿ(852) 2393 0131
Õÿ(852) 2789 0131

1/F, 81-87 Tung Chau Street,

Tai KokTsui, Kowloon, Hong Kong
Tel : (852) 2393 0131
Fax: (852) 2789 0131

2 V߯Ï×

_ŸÛÔß~Ó42-52ßwO
ÿûÿ(852) 2787 0939
óÿ(852) 2395 5521

G/F., No. 42-52 Bedford Road,

Tai Kok Tsui, Kowloon, Hong Kong
Tel : (852) 2787 0939
Fax: (852) 2395 5521

3 Ü{òýݑoß

õ}ýÿ77}966-7ÿ973-4wÿ
ÿûÿ(852) 2674 0715
(852) 2674 2191
Õÿ(852) 2674 9382

DD 966-7 & 973-4, Lot 77, Ping Che,

Fanling, N.T.
Tel : (852) 2674 0715, (852) 2674 2191
Fax: (852) 2674 9382

Ü{Íw¬Y

•Íwÿîw130}1219wÿ
ÿûÿ(852) 2463 5398
ó:(852) 2456 3209

Lot Nos 1219, DD 130, Fuk Hang Tsuen,

Lam Tei, Tuen Mun
Tel : (852) 2463 5398
Fax: (852) 2456 3209

Ù»ÿ oZ{bšOÏýÿÛo¿oÿo}ûëO¬¬2
Remarks : Z{wûoOWíÿnßkwÿÏ~ÿmË}o2
oÿo}ûþ÷\oÿËÿÿsoZ{wÿ_wû2
ÿõ Email : [email protected]
Whilst every care was taken in the preparation of data,
Wo Lee Steel Co. Ltd. accepts no liability for the accuracy of ÿû Website : www.wolee.com
information supplied. All illustrations and drawings presented are
supposed not in scale patterns. No part in this cataloque may be ù Price : ïooÞSSk
reproduced in any form or by any mean without the prior written HK$ 50.00 / copy
consent of the publisher.