Engine Spec-AS4300-H5702

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Model: AS4300 Engine code:H5702

120kW@1500 rpm | 120kW@1800 rpm

Engine Speed Type of Engine Power Generator Power Mechanism


r/min Operation kW k va
Type Over head valve
1500 Prime Power 120 138
Number of valve Intake 2, exhaust 2 per cylinder
1500 Standby Power 132 150 Valve lashes at cold Intake 0.25mm
1800 Prime Power 120 138 Exhaust 0.50mm

1800 Standby Power 132 150

· The engine performance is as per GB/T2820 Valve Timing


· Ratings are based on GB/T1147.1. Opening Close
Intake valve 20.9°BTDC 44.9°ABDC
· Prime Power:
-There is no time limit in the case of variable load operation. Exhaust valve 51.7°BBDC 11.7°ATDC
In any 250hours of continuous operation period,
the variable load of average work load less than
70%of the prime power.
The operation time in the situation of 100%prime power Fuel Consumption
no more than 500 hours. Permit 10%overload running
1hours in any 12 hours of continuous operation period. Power L/h(1500r/min) L/h(1800r/min)
The overload 10% power running time of every year no 6.1
25% 5.5
more than 25 hours.
50% 9.9 11.2
· Standby Power: 75% 14.3 16.4
-The annual total standby power load should be less than80%
and the average running time shall be less than 200 hours. 100% 19.5 21.6
Among them the standby power point should be no more 110% 21.8 24.0
than 25 hours a year.

Specifications
Fuel System
Engine Model AS4300
Injection pump Beiyou in-line “AD” type
In-line,
Governor Electronic regulator
4 strokes,
Feed pump Mechanical type
Engine Type 4 valves,
Injection nozzle Multi hole type
water-cooled ,
Opening pressure 250 kg/cm2
Turbo charged
Fuel filter Full flow, car tridge type
Combustion type Direct injection
Used fuel Diesel fuel oil
Cylinder Type Dry liner

Number of cylinders 4

Bore × stroke 105× 124mm Lubrication System

Displacement 4.3 L Lub. Method Fully forced pressure feed type

Compression ratio 17.3 : 1 Oil pump Gear type driven by crankshaft

Firing order 1-3-4-2 Oil filter Full flow, car tridge type

Injection timing 10°BTDC Oil pan capacity High level 13 liters

Dry weight Approx. 430kg Low level 11 liters

Dimension (L×W×H) 1018 ×716×989 mm Angularity limit Front down 25 deg

Rotation SAE NO.3 Front up 35 deg

Fly wheel housing SAE NO.11.5 Side to side 35 deg

(tooth number of gear:127) Lub. Oil Refer to Operation Manual

www.aggpower.co.uk
Cooling System Engineering Data

Cooling method Fresh water forced circulation Heat rejection to coolant 7.8kcal/sec(1500r/min)
Water capacity 6.8 liters 8.6kcal/sec(1800r/min)
(engine only) Air flow 5.6m3/min (1500r/min)
Lid Min. pressure 70kPa 7.2m3/min(1800r/min)
Water pump Centrifugal type driven by belt Exhaust gas flow 13.2m3/min(1500r/min)
Water pump Capacity 155L/min (1500r/min) 17.0m3/min(1800r/min)
Operation conditions
Features 186L/min (1800r/min) Featuresgas temp
Exhaust 600 °C
The maximum temp.
of coolant in prime/ 104/100 Max. permissible 3 kPa initial
Standby power restrictions
Wax–pellet type Intake system 6 kPa final (need
Thermostat Opening temp. 82°C charge filter element)
Full open temp. 95°C Options
Exhaust system 6 kPa max
Cooling fan Blower type, plastic Max. permissible altitude 2000 m
500 mm diameter, 7 blades
Power consumption 2kw

Cooling air flow 2.3 m³/s Dimension

Electrical System

Charging generator 24V×55A


Voltage regulator Built-in type IC regulator
Star ting motor 24V×4.5kW
Star ting motor 24V
Battery Capacity 120 AH

Features Publication No. GYH0618N, ISSUE 1 @ AGG UK

AGG UK | AGG China | AGG USA | AGG UAE Distributed by

[email protected] | www.aggpower.co.uk

Follow us @facebook.com/aggpowergroup

Follow us @linkedin.com/company/agg-power

Follow us @ AGGPOWER

All information in the document is substantially correct a the time of printing


but may be subsequently altered by the company.

You might also like