SMART ENERGY

CONTROLLER
SUN2000-3/4/5/6/8/10KTL-M1
(High Current Version)

Active Safety Higher Yields Battery Ready

AFCI Active Arcing Up to 30% More Energy Plug & Play Battery
Protection with Optimizer 1 Interface 2

Version No.: 02-202312

 SUN2000-3/4/5/6/8/10KTL-M1 (High Current Version)
Technical Specification
SUN2000 SUN2000 SUN2000 SUN2000 SUN2000 SUN2000
Technical Specification -3KTL-M1 -4KTL-M1 -5KTL-M1 -6KTL-M1 -8KTL-M1 -10KTL-M1
Efficiency
Max. efficiency 98.2% 98.3% 98.4% 98.6% 98.6% 98.6%
European weighted efficiency 96.7% 97.1% 97.5% 97.7% 98.0% 98.1%
Input (PV)
Recommended max. PV power 1 4,500 Wp 6,000 Wp 7,500 Wp 9,000 Wp 12,000 Wp 15,000 Wp
Max. input voltage 2 1,100 V
Operating voltage range 3 140 ~ 980 V
Startup voltage 200 V
Rated input voltage 600 V
Max. input current per MPPT 13.5 A
Max. short-circuit current 19.5 A
Number of MPP trackers 2
Max. input number per MPP tracker 1
Input (DC Battery)
Compatible battery HUAWEI Smart String ESS 5kWh-30kWh
Operating voltage range 600 ~ 980 V
Max. operating current 16.7 A
Max. charge power 10,000 W
Max. discharge power 3,300 W 4,400 W 5,500 W 6,600 W 8,800 W 10,000 W
Output (On Grid)
Grid connection Three-phase
Rated output power 3,000 W 4,000 W 5,000 W 6,000 W 8,000 W 10,000 W
Max. apparent power 3,300 VA 4,400 VA 5,500 VA 6,600 VA 8,800 VA 11,000 VA4
Rated output voltage 220 V AC/380 V AC, 230 V AC/400 V AC, 3W/N+PE
Rated AC grid frequency 50 Hz/60 Hz
Max. output current 5.1 A 6.8 A 8.5 A 10.1 A 13.5 A 16.9 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3%
Output (Off Grid)
BackupBox BackupBox-B1
Max. apparent power 3,000 VA 3,300 VA 3,300 VA 3,300 VA 3,300 VA 3,300 VA
Rated output voltage 220 V/230 V
Max. output current 13.6 A 15 A 15 A 15 A 15 A 15 A
Power factor range 0.8 leading ... 0.8 lagging
Protection Feature
Input-side disconnection device Yes
Anti-islanding protection Yes
DC reverse polarity protection Yes
Insulation monitoring Yes
DC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring Yes
AC overcurrent protection Yes
AC short-circuit protection Yes
AC overvoltage protection Yes
Arc fault protection Yes
Ripple receiver control Yes
Battery charging from grid Yes
General Specification
Operating temperature range –25°C to +60°C (–13°F to +140°F)
Relative operating humidity 0%-100% RH
Max. operating altitude 4,000 m (13,123 ft.) (Derating above 2000 m)
Cooling Natural convection
Display LED Indicators; Integrated WLAN + FusionSolar app
Communication RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE; 4G/3G/2G via Smart Dongle-4G (Optional)
Weight (incl. mounting brackets) 17 kg (37.5 lb)
Dimensions (incl. mounting brackets) 525 mm x 492.5 mm x 166 mm
IP rating IP65
Nighttime power < 5.5 W
Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-450W-P2, SUN2000-600W-P
Standards Compliance (More Available Upon Request)
Safety EN/IEC 62109-1, EN/IEC 62109-2, IEC 62116
G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, NRS
Grid connection standards 097-2-1, IEC61727, IEC62116, DEWA

*1 The inverter max input PV power is 20,000 Wp when long strings are designed and fully connected with SUN2000-450W-P2, SUN2000-600W-P power optimizers.
*2 The max. input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage the inverter.
*3 Any DC input voltage beyond the operating voltage range may result in inverter malfunction.
*4 C10/11: 10,000 VA

Disclaimer: the preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

Version No.: 02-202312