Scribd
Upload
41 views1 page

SAM Control Unit Passenger Side

The document provides instructions for removing and installing the SAM control unit on the passenger side of certain Mercedes models. It lists the necessary parts and tools, provides the step-by-step instructions, and notes on safety and transferring basic data to a new control unit.

Uploaded by

Nuno Vuno
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views1 page

SAM Control Unit Passenger Side

The document provides instructions for removing and installing the SAM control unit on the passenger side of certain Mercedes models. It lists the necessary parts and tools, provides the step-by-step instructions, and notes on safety and transferring basic data to a new control unit.

Uploaded by

Nuno Vuno
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AR54.21-P-1257T Removing and installing SAM control unit, passenger side 20.12.

01
MODELS 211.0/ 2/ 6

P54.21-2189-09

1 Floor mat 4 Nut N10/11 Passenger-side SAM control unit


2 Vapor barrier 5 Electrical connectors
3 Footrest 6 Bolt

Modification notes
12.4.05 Disconnect ground cable of battery deleted Step 2

Remove/Install
Notes on avoiding damage to electronic AH54.00-P-0001-01A
components due to electrostatic discharge
1.1 Connect STAR DIAGNOSIS and cache the When installing new passenger-side SAM
base data from the SAM control unit (front control unit (N10/11).
passenger side) (N10/11) in STAR
DIAGNOSIS
Installation: Transfer staged basic data
to the new passenger-side SAM control unit
(N10/11).
Connect STAR DIAGNOSIS and read out AD00.00-P-2000-04A
fault memory
STAR DIAGNOSIS diagnosis system *WH58.30-Z-1048-13A
2 Fold back floor covering (1) in passenger
footwell
3 Remove damping material (2) upwards off
the footrest (3)
4 Unscrew nuts (4)
5 Remove footrest (3) and put down in front
passenger footwell
6 Separate the electrical connectors (5) The electrical connector (5) leading
circuit 30 must be disconnected first and
contacted last.
7 Unscrew screws (6) and remove the
passenger-side SAM control unit (N10/11)
8 Install in the reverse order

Commercially available tools


Number Designation
WH58.30-Z-1048-13A STAR DIAGNOSIS diagnosis system, Compact Passenger Car 6511 1801 00

You might also like