Fundamental Strength Training After 50
Fundamental Strength Training After 50
Fundamental Strength Training After 50
Mike Wilson
Copyright © 2022 by Mike Wilson.
The content contained within this book may not be reproduced, duplicated, distributed or transmitted in
any form or by any means, without the direct permission of the author or publisher. You cannot amend,
resell, use, quote, or paraphrase any part without written consent from the author or publisher.
Disclaimer
Although the author and publisher have made every effort to ensure that the information in this book
was correct at press time, the author and publisher do not assume and hereby disclaim any liability to
any party for any loss, damage, or disruption caused by errors or omissions, whether such errors or
omissions result from negligence, accident, or any other cause.
The information contained within this book is for educational and entertainment purposes only and
should not be used to replace the specialized training and professional judgment of fitness, health care
or mental health professionals. All effort has been made to present accurate, up to date, and reliable
information. No warranties of any kind are declared or implied. Readers acknowledge the author is not
engaging in the rendering of legal, financial, medical or professional advice. The content of this book
has been derived from various sources. Please consult a licensed professional before attempting any
techniques outlined in this book.
By reading this book, the reader agrees that under no circumstances is the author responsible for any
losses, direct or indirect, which are incurred because of the use of the information contained within this
book, including, but not limited to; errors, omissions, or inaccuracies. The author is not responsible for
any injuries that might occur because of using the exercises recommended in this book. Under no
circumstances will any blame or legal responsibility be held against the publisher or author for any
damages, reparation, or monetary loss because of the information contained within this book.
You should consult your GP/physician or another health professional before starting this or any other
fitness program to determine if it is suitable for your personal needs. This is particularly true if you, or
your immediate family, have a history of high blood pressure or heart disease, have ever experienced
chest pain when exercising or have experienced chest pain in the past month when not engaged in
physical activity. Also, if you smoke, have high cholesterol, are obese, or have a bone or joint problem
that could be made worse by a change in physical activity. Do not start this fitness program if your
GP/physician or other health professional advises against it. If you experience dizziness, faintness, pain
or shortness of breath at any time while exercising, stop immediately and seek professional advice.
Contents
7. Tracking Progress
Importance of Tracking Progress
How to Track Progress
Health & Fitness Tests
13. Conclusion
Thank You and Please!
Author Bio
Coming Soon
Bibliography
Free Bonus Material
Let’s take a reality check… our bodies naturally deteriorate as we age and
this can have a profound effect on our lives if we let it.
Most people will notice subtle changes in their forties before it speeds up in
their fifties and beyond. These changes can have multiple consequences on
our lives; from struggling with simple tasks such as tying our shoelaces, right
up to severe lack of functional capacity (our ability to do common daily
tasks), pain and disease.
However, we have a choice. We can sit back and accept our destiny; our later
years are going to be a regressive deterioration into a weak, immobile, painful
version of ourselves. Or we can educate ourselves and take simple, actionable
steps towards a better quality of life in our later years. By reading this book,
I’m hoping the latter is your plan!
This is the first in a series of five books that will cover all the main
components of fitness for the over 50s. The series aims to educate you on
how you can implement changes in your life right now, to allow yourself to
live your later years with more energy, perform activities of daily living with
more ease, experience less pain and discomfort, have higher levels of self-
confidence, self-esteem, and self-efficacy, and lower your risk of disease.
My decision to write a series of books covering fitness after 50 is to allow
you, as the reader, to focus on the fitness components that are more relevant
to your needs rather than purchasing a general fitness book. Also, it comes
down to my belief that to be in optimal health, both physically and mentally,
beyond the age of fifty, it takes a multi-component approach rather than a
single-component approach.
This belief is backed up by the 2018 PAGAC (Physical Activity Guidelines
Advisory Committee) scientific report. The report provided strong evidence
that a multi-component approach to fitness has greater improvements
(compared to single-component) to physical function in older age, and is
more likely to prevent falls and fall-related injuries.
I’m not implying that those in their 50s have a high risk of falls and fall-
related injuries, but this is an obvious risk when in your 60s and beyond.
Therefore, implementing appropriate fitness interventions in your 50s can not
only allow you to become fit, strong, and healthy, and allow you to complete
your last 10-15 years of your working life with more ease and ability, it also
sets you up for a healthy lifestyle in your 60s and beyond.
Don’t wait for the symptoms of aging to kick in and then attempt to cure
them. Start training now and prevent those symptoms from kicking in for as
long as possible!
The Simple Fitness After 50 Series:
Book 1: Fundamental Strength Training After 50
Book 2: Fundamental Core Training After 50 (Est. release date - July 2022)
Book 3: Fundamental Balance Training After 50 (Est. release date - October
2022)
Book 4: Fundamental Mobility and Flexibility After 50 (Est. release date -
January 2023)
Book 5: Fundamental Posture Training After 50 (Est. release date - March
2023)
Introduction
The human movement systems affect every physical action we take; as they
degenerate and weaken, it has a profound impact on basic functional
capabilities such as carrying shopping bags, getting in and out of chairs,
using stairs, and opening jars and tin cans.
Luckily for us, effective strength training can reduce the rate of deterioration,
and help maintain our functional capacity in our later life.
Not only can strength training positively affect the degenerative processes
outlined above, but it can also have an indirect impact on all body systems.
For example, a lower metabolic rate accompanies a decrease in muscle mass
and an increase in body fat. This can lead to obesity, type 2 diabetes, heart
disease, joint problems, and more.
Strength training can maintain or even increase muscle mass in mid-later life.
Therefore, it is likely to help maintain a healthy body composition (higher
muscle mass and lower body fat) and reduce the risk of associated diseases.
Chapter 4
Training Terminology
Repetitions (Reps): how many times you perform an exercise. ’10 reps’
means that the exercise is performed 10 times before stopping and resting.
Sets: a set is a group of repetitions. 2 sets of 10 reps = 10 reps - rest - 10 reps
- exercise finished.
Load: the ‘weight’ of the equipment that the muscles are producing force
against. E.g. weight of barbells or dumbbells.
Rest: the time taken to rest and recover between sets.
Hypertrophy Training: resistance training performed using specific
variables (sets/repetitions/load/rest) to maximize the increase in the size of
muscles.
Endurance Training: resistance training performed using specific variables
(sets/repetitions/load/rest) to maximize the ability of muscles to perform
repeated efforts with minimal fatigue.
Chapter 5
The key to gaining and maintaining lifelong health and fitness is making
physical activity a habit; part of your lifestyle rather than a short-term quick-
fix.
By focusing on the key fundamentals and keeping exercise simple, it
becomes time-efficient, makes it easier to focus on the goal in-hand, creates
increased consistency, and has a higher chance of being seamlessly
incorporated into your current lifestyle.
To enable you to get from a relatively sedentary lifestyle to a point where
exercise is a regular and consistent habit, I recommend focusing some time
on effective goal setting.
When asked about goals, most clients would respond with comments such as
“I want to lose weight” or “I want to get stronger/fitter“.
The problem with these ‘goals’ is that they are too vague and probably not
the deep-rooted goal. They are too vague because if a person spends a year
exercising to lose weight, and after 12 months they have lost 1lb, they have
essentially achieved the goal of losing weight! However, 1lb over 12 months
probably wasn’t what they hoped for. Therefore, goals need to be much more
specific and detailed.
In terms of not being the ‘deep-rooted’ goal, when a person says they want to
lose weight it usually isn’t the weight loss they want, it’s what accompanies
the weight loss… the emotions and feelings it creates such as increased self-
confidence and happiness in one’s self.
People rarely want to get stronger or fitter for the sake of it, it’s the ability to
do activities or tasks with more ease, to a higher level, without getting
breathless or aching. Simple things like using the stairs, playing with the
children/grandchildren, walking to enjoy some sightseeing, or playing a sport
to a higher level.
Simply saying you want to lose weight or get stronger is like saying you want
to earn more money without having a “why” (have a nicer house, new car,
travel more, etc.). It’s the “why” that becomes the motivational driver for
achieving the goal, not the actual goal itself.
To help you set goals effectively, I want you to do four things:
1. Set a combination of outcome goals and process goals.
2. Use the SMART acronym for setting Specific, Measurable,
Achievable, Relevant, and Time-Bound goals.
3. Set short, medium, and long-term goals.
4. Write a list of WHY you want to achieve your goals. Write them or use
an image to represent them, and have them on your computer
background, on a notice board in your house, on the fridge, or
wherever is highly visible on a daily basis. Focus on these regularly,
particularly when you hit a point in the journey where you are
struggling to adhere to your training.
SMART Goals
Specific
Measurable
Achievable
Relevant
Time-Bound
Specific
This is where you need to add details. “I want to lose weight” vs “I will lose
10lb and reduce my waist circumference by 2cm“. Note not only the detail
added but the change in the verb from ‘want’ to ‘will'. The former suggests
it’s a desire, a hope, that you will achieve it. The latter is a statement of
intent, confirmation that it is going to happen. “I will…” is a more powerful
statement than “I want…”.
Measurable
You need to be able to track progress and have a clear indication of whether a
goal was achieved or not.
It needs to be quantifiable, with no room for misinterpretation or guesswork.
By adding the amount of weight loss (e.g. 10lb), assuming you take a
baseline measurement before starting, you can weigh yourself periodically (I
don’t suggest more regularly than every 1-2 weeks) to track progress and
know if you lost the 10lb or not.
If you are unsure how you will measure progress and the result, you either
need to change the goal, add more detail, or find a method of measuring it
using an appropriate fitness test (See Chapter 7: Tracking Progress for some
examples).
Achievable
Think carefully about the amount/quantities associated with your goal and
ensure that they are challenging but achievable. If it’s not a challenge, your
focus and determination are likely to fade. If your goal is so extreme that it’s
unachievable, then you are setting yourself up for failure from day 1. It needs
to require some hard work, but be realistic.
Relevant
Many people use the ‘R’ in SMART as ‘realistic’ but this usually comes
under the term achievable, so I want you to ensure that every goal is relevant
to the overall outcome you are trying to achieve.
For example, if your overall outcome goal is to improve your strength to
perform daily tasks with more ease, then a goal to run 5km 3x/week isn’t
relevant unless you have some kind of aerobic fitness goal as well. “I will
complete a 30-minute total-body strength training session, 3 times per week”
is a relevant process goal to the overall outcome goal.
Time-Bound
All goals are a distant ambition unless you give yourself a deadline for
outcome goals and a time and frequency for process goals.
If we take the earlier goal of “I will lose 10lb and reduce my waist
circumference by 2cm”, we simply need to add a deadline to make it time-
bound.
“I will lose 10lb and reduce my waist circumference by 2cm, by the end of
(month/year)” is now a SMART goal; it has details, it is quantifiable and
measurable via weighing scales and a tape measure, it is achievable if based
on a short-medium timeframe such as 2 months, it would be relevant to the
person, and it is time-bound.
Health Screening
Tracking Progress
Waist Circumference
Waist circumference is often used as a key risk indicator of coronary heart
disease and diabetes and is therefore worth monitoring, regardless of whether
you use other circumference measurements outlined above.
Waist
Circumference Classification
To measure your waist circumference:
1. Find the bottom of your ribs and the top of your hips.
2. Place a tape measure around your middle at a point halfway between
them (usually in line with or just above the belly button).
3. Make sure the tape measure is pulled tight, but isn’t digging into your
skin.
4. Breathe out naturally and take your measurement.
5. Take your measurement a second time, just to be sure.
Body Composition
Body composition is the percentage of your body that comprises lean body
mass (muscle, bone, etc.) vs fat mass (visceral and subcutaneous body fat).
It is difficult and expensive to get a very accurate reading. Methods of
measuring body composition usually come under one of two categories: 1)
Accurate but expensive and/or inaccessible, or 2) Affordable, accessible, but
inaccurate.
DEXA and MRI are medical scans that can provide accurate body
composition but are expensive and inaccessible to most.
The most commonly used in fitness environments are a type of weighing
scale with two separate metal plates. This is called bioelectrical impedance; it
uses a weak electrical current to send through your body from one metal plate
through the body to the other metal plate.
Muscle holds a high volume of the body’s water content. Muscle and water
give low resistance to the electrical impulse, whereas body fat provides high
resistance. This enables the device to estimate body composition based on the
amount of impedance (resistance) to the electrical impulse, affecting the
voltage output.
There are a few major flaws to bioelectrical impedance:
Electrical impulses take the shortest route from one metal plate to the
other. If only your feet are on metal plates, the electrical impulse is only
measuring impedance (resistance) in each leg. This doesn’t factor in the
body fat distribution as it’s not measured around key areas such as the
belly.
Hydration levels impact results. This is not just affected by your water
intake, but also your food consumption (amount/timing/food types),
activity levels prior to measurement, caffeine consumption, etc.
One other commonly used method is the use of skin-fold calipers to measure
the ‘pinch’ of skin and fat at specific anatomical landmarks. This method, if
performed using high-quality calipers and an experienced professional, can
be relatively accurate. But can also be fairly inaccurate if using cheap calipers
by an inexperienced user.
My advice: don’t worry about exact body composition. Circumference
measurements are easier to perform accurately, using a very affordable
device. Although it doesn’t provide exact body composition measurements, it
provides changes in body size, which indicates changes in muscle mass vs
body fat.
Muscular Strength
The principal topic of this book is strength training, but that doesn’t mean
your goal is to increase your muscular strength. Of course, strength training is
likely to make you stronger, but that is just one of many training outcomes of
strength training. In fact, the adaptations that the muscular system makes in
response to strength training can vary depending upon the number of
repetitions (reps) performed in a set, and the corresponding load that is lifted.
There are 3 main primary outcomes on the muscular system:
Muscular Strength: This is the ability of the muscular system to overcome
very large loads, just once or a few times. High levels of muscular strength
result in the ability to move very heavy loads. However, it is not a measure of
how many times you can move the load.
Someone who has high levels of muscular strength can lift very heavy
objects, even if it’s just once. But they are not usually very good at lifting
lighter weights many times as they fatigue quickly.
To improve muscular strength, you need to lift very heavy weights with low
repetitions, typically 1-5 reps.
Hypertrophy: This outcome is regarding the increase in the size of muscles.
This outcome applies to most people as it increases resting metabolic rate,
which increases daily energy expenditure (burns more calories daily),
resulting in increased fat loss. It also optimizes body shape, is safer than
training for muscular strength, and will still result in increased strength and
all the benefits that come with that.
To improve muscular hypertrophy, you need to lift moderate to heavy
weights (relative to you) with moderate repetitions, typically 6-12 reps.
Progress is usually monitored via circumference measurements, outlined
above.
Muscular Endurance: This is the ability of the muscular system to overcome
relatively light loads repeatedly. Someone who has high levels of muscular
endurance has a high resistance to fatigue when performing a movement
against load many times. But they are not usually very good at lifting very
heavy weights even for a few repetitions.
To improve muscular endurance, you need to lift light-moderate weights with
high repetitions, typically >12.
Based on the above information, if you feel you need to track your progress
in muscular strength, you simply need to measure and monitor the maximal
load/weight you can perform on a select number of exercises.
Many athletes would perform a 1 rep max; record the maximum weight they
can lift just once. This has a high risk of injury for a non-athlete, even one
who has youth on their side, so I do not recommend it for the over 50s. I
would suggest a 5 rep max on a Bench Press and Back Squat, and only for
relatively well-conditioned older adults.
It is likely that testing and monitoring muscular strength is unnecessary for
most readers of this book, so skip it unless you feel it’s necessary for you,
and you believe you are currently sufficiently conditioned to perform it.
Muscular Endurance
We’ve outlined above what muscular endurance is, and again, it is unlikely
that you feel it is worthy of testing and monitoring. However, if you think it
applies to your goals and you would benefit from testing it and monitoring it,
here are two tests you can try:
Maximal Squat Test:
Find a chair or bench low enough to cause your knees to bend to 90º when
you sit on the edge. Stand in front of it with your back to it. Squat down until
your buttocks lightly touch the chair/bench and stand back up to a fully
upright position. Repeat until you can no longer perform anymore and record
the number of repetitions completed.
Aim for approximately 2s to complete each repetition to keep conditions
consistent. Check bodyweight squat technique later on in the book before
attempting this.
Maximal Push Up Test:
Choose either a full push up or ¾ push up. Check technique later in the book.
Perform as many repetitions until you can no longer continue without rest.
For repetitions to count, you must lower yourself until your elbows are at 90º
and push all the way up, leaving only a slight bend in your elbow at the top.
Aim for 2s per repetition. This will keep conditions consistent each time you
attempt it. Record the number of reps performed.
Progress Photos
This is a test I highly recommend, along with circumference measurements.
The circumference measurements give you the data in numbers/figures, and
the photos give you the visual reference. Without them, you have no visual
reference to compare your results against the earlier version of yourself.
After 6 months of training, you’ll have got used to the new you, and won’t
know how significant your physical changes have been unless you can do a
visual comparison.
Choose a location with good natural light and a plain background. Wear as
minimal clothing as you’re comfortable with (you choose who sees them!),
stand in a relaxed state and take three photos; one facing the camera, one side
on, and one with your back to the camera.
The first set of photos has no real immediate value. Save them somewhere
safe, ready for when you do the next set of photos. Leave a minimum of 6
weeks between photos, and no more than 12 weeks.
Chapter 8
Society may suggest that strength training is for the young. Strength Training
is for everyone, as long as the level/difficulty is pitched appropriately to the
individual.
The reason for performing strength training often changes with age, with the
young focused more on aesthetics and/or sports performance, and older adults
more focused on health and activities of daily living (ADL’s), as well as
potentially some aesthetics and sports performance.
There has been extensive research into strength training for older adults, and
the positives of strength training far outweigh the negatives for those without
significant and relevant health conditions.
Common Myths
“Strength Training isn’t safe for older adults.”
There’s a misconception that beyond a certain age, you will be limited by
your deteriorating physical capabilities, and this just needs to be accepted.
The aging process happens. Nothing can change that. But strength training
can delay it, slow it, enable you to manage it, and ultimately allow you to live
a life with more energy, less fatigue, more capabilities, less pain, and improve
your overall quality of life.
Strength training is safe as long as basic guidelines are adhered to; perform
exercises with good technique, progress gradually, and work within your own
limitations.
“Strength training is not a suitable form of exercise for older adults.”
Based on the information provided in the chapter on the aging process and
the benefits of strength training, I hope you can see how important strength
training is to the health, well-being, and quality of life of older adults. I am
not suggesting strength training is the ONLY form of exercise that is
necessary, but it is one component of fitness that should not be ignored.
“Exercising and trying to be more healthy is pointless after 50, the decline in
old age is inevitable”
This is simply not true. There are people in their 50s, 60s, 70s, and even 80’s
who are fitter than they have ever been. Some running marathons and
becoming bodybuilders! Alicia I. Arbaje, MD, MPH, an assistant professor of
Geriatrics and Gerontology at Johns Hopkins University School of Medicine
in Baltimore, states that a lot of the symptoms that we associate with old age,
such as weakness and loss of balance, are actually symptoms of inactivity,
not age.
“It’s too late to start exercising and make a difference to my health.”
Studies have found that even people who start an exercise routine in their 90s
can boost muscle strength. Further research shows that starting exercise late
in life can still reduce the risk of health problems such as diabetes, and
improve symptoms of such diseases. Dr. Chhanda Dutta, Chief of the Clinical
Gerontology Branch, Division of Geriatrics and Clinical Gerontology,
National Institute on Aging states that “it really is never too late to start
exercising and reaping the benefits“.
“Older adults should not perform strength training without the supervision of
a health professional.”
I’m a big advocate for supervised fitness training. Working in fitness
education, including training people to become fitness instructors and
personal trainers, has been a huge part of my 20+ years working in the fitness
industry. I highly recommend you seek the advice and support of a well-
respected personal trainer to further enhance your chances of achieving your
desired results in a safe and timely manner. But personal training is not a
necessity to achieve results.
I recommend seeing your GP/Physician prior to starting a strength training
program and listening to their guidance and advice based on your age and
health. But, assuming the GP/Physician has not advised against strength
training, then unsupervised participation is perfectly reasonable, just like a
younger person. As always, maintain excellent technique, work within your
limitations, and progress gradually.
“Exercise cannot be good for me, it causes joint pain”
Chronic pain caused by arthritis, may mean exercising seems too painful.
However, studies carried out on older adults with arthritis, show that regular
exercise helps to reduce pain and improve joint function.
Chapter 9
Click here to gain access to a video demonstration of a full body static stretch
routine.
Chapter 10
Regardless of the exercise, there are some techniques that remain throughout
all exercises. Let’s have a look at them now before we get into the specifics
of each exercise.
Spinal Alignment
The spine has 4 main curves, 3 of which can change significantly as we
move. The aim is to keep a “neutral spine” (natural curves) through all
strength training, to maximize the safety and effectiveness of the exercises.
A neutral spine has a slight inward/concave curve in the lower back (the
lumbar vertebrae), and slight outward/convex curve in the upper back (the
thoracic vertebrae), and another inward/concave curve in the back of the neck
(the cervical vertebrae).
Curves &
Sections of the Spine
Wrist Alignment
Particularly relevant to upper body strength training exercises, aim to keep
your wrist in a neutral position to avoid excess stresses on the joint. This is
best achieved by ensuring you wrap your thumb around the bar you’re
holding, and point your knuckles (the ones halfway along your fingers) in the
direction of the movement.
Tempo
Tempo is the speed at which you move during the exercise.
It’s a variable that can be changed, but I suggest a 2-0-2-0 tempo or a 2-0-3-0
tempo to start with. These numbers mean that whenever the load is rising
against gravity, allow 2 seconds for the movement to occur (the first 2), avoid
pausing (the 0) and then take 2-3 seconds for the load to lower towards the
floor, and repeat without pausing (the other 0).
This is a safe tempo because it avoids rapid, uncontrolled movements that
may put unnecessary stress on the joints, muscles and connective tissue, but
is also an effective tempo as the muscles have sufficient time under tension
(TUT), particularly during the lowering phase when gravity can do the work
for you!
Breathing
Breathing patterns can affect blood pressure and also the support your lumbar
vertebrae get from intra-abdominal pressure.
To keep these optimal, aim to breathe continuously (avoid holding your
breath) and ideally breathe out (exhale) when the load rises against gravity,
and breathe in (inhale) when the load lowers towards the floor with gravity.
Chapter 11
The Essential Eight are the movement patterns that should create the
foundation for all strength training after 50. They are the fundamental
strength training exercises. Any other strength training movement patterns
are not a necessity for maintaining a strong, healthy, well-functioning body in
our later years.
The Essential Eight are as follows:
1. The Squat
2. The Hinge
3. The Step Up
4. The Horizontal Pull
5. The Vertical Pull
6. The Horizontal Push
7. The Vertical Push
8. The Carry
The Squat
The squat trains all the major muscle groups in the lower body; Quadriceps,
Gluteus Maximus, Hamstrings, and Calf muscles.
In terms of movement, the squat is essential for human function. It’s how we
sit on and get up from a chair, the sofa, bed, and the toilet! It allows us to
‘crouch down’ (and back up) to pick things up off the floor, open low
cupboards, and get in and out of cars.
The squat is a natural human movement, one that we can do from around 1
year of age. As years go by, the less we squat and the less capable of
squatting we become! Hours of sitting cause muscles to tighten and/or
weaken, as well as a reduction in joint mobility, muscular flexibility, and
balance.
We can all still squat, but the coordination, efficiency, strength, endurance,
and balance deteriorate throughout life unless we maintain our capabilities. If
this continues to deteriorate, our chances of being able to perform this
fundamental movement in our later years diminish, and subsequently, our
quality of life becomes poorer.
In terms of an exercise, there are multiple variations of a squat, all of which
target the same main working muscles; those that improve our ability to
perform the activities of daily living outlined above.
When you think of the squat as an exercise, it may be a daunting prospect to
have a barbell loaded with weight plates on your back while you attempt to
perform your best effort of a squat. However, the Barbell Back Squat is just
one variation of a squat.
I want this book to provide you with an effective strength training approach
that is safe, simple and manageable. I will therefore provide you with enough
squat variations, including progressions/regressions, to find the most suitable
for you, dependent upon your capabilities, experience, confidence, and
equipment available.
Chair Squat
Target Muscles: Quadriceps, Glutes, Hamstrings, Calves
Outline: It is the easiest version of a squat, so if you are new to exercise, or
have not exercised for a long time, then I suggest you start with this version
of the Squat. Aim to perfect the technique in the chair squat and be able to
perform 15 repetitions comfortably before moving on to more challenging
squat variations.
Equipment: Stable chair or bench.
Chair Squats
Instructions:
1) Stand in front of your chair with your feet shoulder-width apart, toes
pointing forward (or slightly outwards), arms in front of the chest for balance,
shoulder blades back and down (chest open & shoulders relaxed), and core
braced.
2) Start the movement by pushing the bum back and then bending the knees
as if you are going to sit down. Keep weight distributed evenly between the
feet and maintain full contact between the feet and the floor.
3) Keep the chest lifted and core braced, breathing in on the way down.
4) Pause when your bum touches the chair.
5) Push your feet firmly into the ground and breathe out as you return to a
standing position.
6) Finish standing tall with glutes fully contracting (glute squeeze).
Key Points:
Keep three points of contact between your feet and the ground. One
point is behind the big toe, one is behind the little toe, and one on the
heel. Think of these three points as a tripod and keep them grounded at
all times. Ensure weight stays distributed evenly. Always keep the heels
grounded and avoid weight shifting into the balls of the feet.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders relaxed back and
down.
Breathe in on the way down, breathe out on the way up.
At the bottom of the chair squat, aim for your torso to be at the same
angle as your lower leg from a side view (use a mirror or record
yourself).
Ensure your knees track in line with your toes. Most faults result in the
knees caving inwards; to prevent this, subtly screw your feet into the
ground in an outwards direction and keep tension in your glutes
throughout the move.
Bodyweight Squat
Target Muscles: Quadriceps, Glutes, Hamstrings, Calves
Outline: This is a little more challenging than chair squats. Ensure you can
perform 15+ chair squats with good technique before moving on to this
exercise. Again, make sure you can comfortably perform 15+ bodyweight
squats with good technique before moving on to goblet squats.
Equipment: None.
Bodyweight
Squats
Instructions:
1) Stand with your feet shoulder-width apart, toes pointing forward (or
slightly outwards), arms in front of the chest for balance, shoulder blades
back and down (chest open & shoulders relaxed), and core braced.
2) Start the movement by pushing the bum back slightly and then bending the
knees as if you are going to sit down. Keep weight distributed evenly
between the feet and maintain full contact between the feet and the floor.
3) Keep the chest lifted and core braced, breathing in on the way down.
4) Aim to get your thighs parallel to the floor, or as low as possible without
compromising technique.
5) Push your feet firmly into the ground and breathe out as you return to a
standing position.
6) Finish standing tall with glutes fully contracting (glute squeeze).
Key Points:
Keep three points of contact between your feet and the ground. One
point is behind the big toe, one is behind the little toe, and one on the
heel. Think of these three points as a tripod and keep them grounded at
all times. Ensure weight stays distributed evenly. Always keep the heels
grounded and avoid weight shifting into the balls of the feet.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders relaxed back and
down.
Breathe in on the way down, breathe out on the way up.
At the bottom of the bodyweight squat, aim for your torso to be at the
same angle as your lower leg, from a side view (use a mirror or record
yourself).
Your technique, as well as your mobility, will dictate the depth of your
squat. Aim for thighs parallel to the floor, but go as low as possible
without losing neutral spinal alignment. Torso angle similar to that of
the lower leg, and ensure feet stay grounded, particularly the heels.
Ensure your knees track in line with your toes. Most faults result in the
knees caving inwards; to prevent this, subtly screw your feet into the
ground in an outwards direction and keep tension in your glutes
throughout the move.
Goblet Squat
Target Muscles: Quadriceps, Glutes, Hamstrings, Calves
Outline: This is more challenging than bodyweight squats and can vary in
intensity depending on the weight you use. Ensure you can perform 15+
bodyweight squats with good technique before moving on to this exercise,
and start with a relatively lightweight and progress appropriately. If you are
comfortably performing 15 repetitions with a weight, it’s time to progress the
weight to make it a little more challenging.
Equipment: Dumbbell, Kettlebell, Sandball, Medicine Ball, or tin of beans!
Goblet Squat
Instructions:
1) Stand with your feet shoulder-width apart, toes pointing slightly outwards,
up to 30º. Hold your chosen weight close to your chest with your elbows
under your wrists. Chest open, shoulders relaxed, and core braced.
2) Start the movement by pushing the bum back slightly and then bending the
knees as if you are going to sit down. Keep weight distributed evenly
between the feet and maintain full contact between the feet and the floor.
3) Keep the chest lifted and core braced, breathing in on the way down.
4) Aim to get your thighs parallel to the floor, or as low as possible without
compromising technique.
5) Push your feet firmly into the ground and breathe out as you return to a
standing position.
6) Finish standing tall with glutes fully contracting (glute squeeze).
Key Points:
Keep three points of contact between your feet and the ground. One
point is behind the big toe, one is behind the little toe, and one on the
heel. Think of these three points as a tripod and keep them grounded at
all times. Ensure weight stays distributed evenly. Always keep the heels
grounded and avoid weight shifting into the balls of the feet.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders relaxed back and
down.
Breathe in on the way down, breathe out on the way up.
Move your elbows away from your body as you descend, to keep them
directly under your wrists.
At the bottom of the goblet squat, aim for your torso to be at the same
angle as your lower leg, from a side view (use a mirror or record
yourself).
Your technique, as well as your mobility, will dictate the depth of your
squat. Aim for thighs parallel to the floor, but go as low as possible
without losing neutral spinal alignment. Torso angle similar to that of
the lower leg, and ensure feet stay grounded, particularly the heels.
Ensure your knees track in line with your toes. Most faults result in the
knees caving inwards; to prevent this, subtly screw your feet into the
ground in an outwards direction and keep tension in your glutes
throughout the move.
Instructions:
1) Stand with your feet shoulder-width apart, toes pointing slightly outwards,
up to 30º. Hold your chosen weight close to your chest with your elbows
forward and powerboat/sandbag resting on the chest. Chest open, shoulders
relaxed, and core braced.
2) Start the movement by pushing the bum back slightly and then bending the
knees as if you are going to sit down. Keep weight distributed evenly
between the feet and maintain full contact between the feet and the floor.
3) Keep the chest lifted and core braced, breathing in on the way down.
4) Aim to get your thighs parallel to the floor, or as low as possible without
compromising technique.
5) Push your feet firmly into the ground and breathe out as you return to a
standing position.
6) Finish standing tall with glutes fully contracted (glutes clenched!).
Key Points:
Keep three points of contact between your feet and the ground. One
point is behind the big toe, one is behind the little toe, and one on the
heel. Think of these three points as a tripod and keep them grounded at
all times. Ensure weight stays distributed evenly. Always keep the heels
grounded and avoid weight shifting into the balls of the feet.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders relaxed back and
down.
Breathe in on the way down, breathe out on the way up.
Keep your elbows pointing away from you in a forward direction.
At the bottom of the front squat, aim for your torso to be at the same
angle as your lower leg, from a side view (use a mirror or record
yourself).
Your technique, as well as your mobility, will dictate the depth of your
squat. Aim for thighs parallel to the floor, but go as low as possible
without losing neutral spinal alignment. Torso angle similar to that of
the lower leg, and ensure feet stay grounded, particularly the heels.
Ensure your knees track in line with your toes. Most faults result in the
knees caving inwards; to prevent this, subtly screw your feet into the
ground in an outwards direction and keep tension in your glutes
throughout the move.
Kettlebell Deadlift
Target Muscles: Glutes and Hamstrings
Outline:
The Kettlebell Deadlift is one of the simplest and safest versions of a deadlift,
but is also highly effective when performed with great technique and an
appropriate weight. As well as strengthening the buttocks (glutes) and back
of the thighs (hamstrings), there is also a small amount of work in the front of
the thigh (quadriceps), and significant strengthening of the lower back and
core.
The kettlebell deadlift is easier to master than using an Olympic barbell and
is also more affordable and space-saving in a home environment. Kettlebells
usually range from 4kg/9lb to 48kg/106lb, allowing a very manageable
starting weight with plenty of room for progression.
Equipment: Kettlebell.
Kettlebell
Deadlift
Instructions:
1) Stand with your feet shoulder-width apart, toes pointing slightly outwards,
up to 30º, with the kettlebell centred between the balls of your feet.
2) Hinge your hips backwards, tipping from the hips with a slight knee bend
until your torso reaches approximately 30º from the floor. Wrap both hands
around the kettlebell handle. Before you lift, open up your chest, pull your
shoulder blades back and down, brace your core, and tilt your head to keep
the neck in line with the rest of the spine. Ensure your spine has and
maintains natural curves.
3) Drive your feet into the ground lifting the kettlebell off the floor. Keep
your arms straight and exhale as you rise.
4) Finish with the kettlebell resting in front of your body, glutes fully
engaged (clench them!), core remaining engaged, chest open, shoulder blades
back and down, looking straight ahead.
5) Hinge your hips backwards again, tipping from the hips with a slight knee
bend until your torso reaches approximately 30º from the floor and the
kettlebell touches down. Breathe in on the way down.
6) Repeat.
Key Points:
Ensure the kettlebell is between your feet when you start, not out in
front of you.
Keep your feet fully grounded throughout.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulder blades back and
down.
Breathe in on the way down, breathe out on the way up.
Keep the kettlebell directly under your shoulders throughout.
At the bottom of the deadlift, aim for approximately a 30º angle from the
floor. Video yourself from the side and check.
Ensure your knees only bend a small amount. The height of the hips
should be approximately halfway between the knees and the shoulders at
the bottom of the deadlift.
Suitcase Deadlift
Target Muscles: Glutes and Hamstrings
Outline: Although you can perform this exercise with two kettlebells, one in
each hand, we are going to focus on the single-arm version. As the name
suggests, this exercise is like lifting a suitcase from the floor to a standing
position.
It predominantly utilizes the glutes and hamstrings on both sides of the body,
but also adds a core strengthening element. With the weight only on one side,
you will build strength in the core muscles that create (& prevent) sideways
(lateral) stability of the spine.
To balance the work between the left and right sides of the body, the suitcase
deadlift will need to be performed with the kettlebell in the left hand and in
the right hand. Because of the load being off-centre, it is more challenging
than the standard kettlebell deadlift, therefore, master the Kettlebell Deadlift
before performing the Suitcase Deadlift.
Equipment: Kettlebell.
Suitcase
Deadlift
Instructions:
1) Stand with your feet hip-shoulder width apart, toes pointing straight ahead
or slightly outwards, with the kettlebell positioned to the outside of the ball of
one foot.
2) Hinge your hips backwards, tipping from the hips with a slight knee bend
until your torso reaches approximately 30º from the floor. Wrap one hand
around the kettlebell handle.
3) Before you lift, open up your chest, square up your shoulders and pull your
shoulder blades back and down, brace your core, and tilt your head to keep
the neck in line with the rest of the spine. Ensure your spine has and
maintains natural curves.
4) Drive your feet into the ground lifting the kettlebell off the floor. Keep
your arms straight and exhale as you rise.
5) Finish with the kettlebell resting alongside your body, glutes fully engaged
(clench them!), core remaining engaged, chest proud, shoulder blades back
and down, looking straight ahead.
6) Hinge your hips backwards again, tipping from the hips with a slight knee
bend until your torso reaches approximately 30º from the floor and the
kettlebell touches down. Breathe in on the way down.
7) Repeat.
Key Points:
Ensure the kettlebell is positioned next to your foot, not out in front of
you.
Keep your feet fully grounded throughout.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulder blades back and
down.
Breathe in on the way down, breathe out on the way up.
Keep the kettlebell directly under your shoulders (from a side view)
throughout.
At the bottom of the deadlift, aim for approximately a 30º angle from the
floor. Video yourself from the side and check.
Ensure your knees only bend a small amount. The height of the hips
should be approximately halfway between the knees and the shoulders at
the bottom of the deadlift.
Single-Leg Deadlift
Target Muscles: Glutes and Hamstrings
Outline: The single leg deadlift is the most technical and challenging of the
three types of deadlift we are covering. It works one side of the body at a
time, known as a unilateral exercise.
As well as strengthening the glutes and hamstrings, its benefits include
improving any imbalances between the muscles on the left and right side of
the body, improving balance which is vital as we get older, and challenging
the core muscles to prevent any unwanted rotation through the trunk.
I would suggest mastering the kettlebell deadlift and suitcase deadlift before
attempting the single-leg deadlift and starting with no weight or a very
lightweight.
Equipment: Kettlebell or Dumbbell.
Single-Leg
Deadlift
Instructions:
1) Hold a kettlebell in your right hand and rest it on your thigh. Set your
shoulder blades back and down, brace your core, and look straight ahead. Lift
your left foot slightly off the ground and ensure you have a slight bend in
your right knee.
2) Hinge your hips backwards along with your left leg, tipping from the hips
with a slight bend in the right knee until your torso reaches approximately 30º
from the floor. Allow the kettlebell to hang under the right shoulder and keep
your neck in line with the rest of the spine. Ensure your spine maintains its
natural curves. Inhale as you descend.
3) Drive your right foot into the ground, returning the body to its upright
position again. Exhale as you rise.
4) Finish in the start position, right glute fully engaged (clench it!), core
remaining engaged, chest proud, shoulder blades back and down, looking
straight ahead.
5) Repeat for the desired number of repetitions and then change legs.
Key Points:
Keep the foot on the floor fully grounded throughout.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulder blades back and
down.
Breathe in on the way down, breathe out on the way up.
Keep the kettlebell directly under your shoulder throughout.
At the bottom of the single-leg deadlift, aim for approximately a 30º
angle from the floor, shoulders higher than hips. Video yourself from the
side and check.
Ensure your knees only bend a small amount. The hips should remain
positioned well above the knees.
Kettlebell
Swing
Instructions:
1) Pick up the kettlebell in the same way you did during the kettlebell
deadlift. Stand with your feet slightly wider than shoulder-width, toes
pointing outwards, approximately 30º. Set your shoulder blades back and
down, chest lifted, brace your core, and look straight ahead.
2) From the start position, start the swing by shifting the hips back slightly
and immediately thrusting them forwards. Allow the kettlebell to swing
between the thighs whilst pushing the hips back, with a slight bend of the
knees until your torso reaches approximately 30º from the floor. Ensure your
spine maintains natural curves, including the neck.
3) Perform a ‘hip snap’ by dynamically thrusting the hips in a forward
direction, allowing the kettlebell to ‘swing’ through to shoulder height. Keep
your arms almost straight with a slight bend at the elbow, shoulder blades
remain back and down and exhale on the way through to the top.
4) Engage the glutes in full extension of the hips, with the base of the KB
facing away from the body. Keep the core braced to maintain neutral curves
in the spine and to avoid arching the lower back. Look straight ahead, over
the top of the kettlebell.
5) After a moment of weightlessness at shoulder height, let gravity allow the
kettlebell to drop naturally. Hinge your hips backwards again, allowing the
kettlebell to swing between the thighs, with the handles above knee height.
6) Repeat the ‘hip snap’ for the next repetition and continue this sequence
until the set is complete.
Key Points:
This is a relatively fast, dynamic movement rather than slow and steady.
Keep your feet fully grounded throughout, outside shoulder width to
allow the kettlebell to pass through the thighs.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest proud (slightly lifted), and shoulders relaxed back and
down.
Breathe in on the way down, breathe out on the way up.
When the kettlebell passes between the legs, ensure the handle stays
above your knee height, otherwise, it will cause excessive forces on the
lower back. To achieve this, let the kettlebell drop from shoulder height
before you tip from your hips.
Use the ‘hip snap’ to swing the kettlebell through to shoulder height.
Avoid lifting with your shoulder muscles. The bottom of the kettlebell
should face away from you when at shoulder height.
At the bottom of the swing, aim for your torso to be approximately 30º
angle from the floor. Video yourself from the side and check.
Ensure your knees only bend a small amount to avoid squatting, and
keep your knees pushed out in line with your toes.
Glute Bridge
Target Muscle: Gluteus Maximus
Outline: The Glute Bridge is a must-do exercise for targeting the Glute Max
as the primary working muscle, with minimal input from secondary muscles.
This is vitally important if your glutes have become weak and under-active
because of inactivity and prolonged sitting through desk-bound work,
driving, watching tv, etc.
Weak and under-active glutes, along with tight and overactive opposing
muscles, can cause postural problems that can lead to lower back pain and a
lack of functional capabilities. We cover this in more detail in book five of
the Simple Fitness After 50 Series.
The Glute Bridge is relatively easy to perform and can be done with no
equipment. There are several variations with room for progression by adding
load to the front of the hips, and by moving on to hip thrusts (covered next).
Equipment: Mat.
Glute Bridge
Instructions:
1) Lay on the floor, or a mat, with your arms resting on the floor alongside
your body. Bend the knees until your feet are flat on the floor and your heels
are close to your fingertips. Feet should be hip-shoulder width apart with and
straight or slightly turned out. Brace the core before commencing.
2) Push through your heels, lifting your hips until you have a straight line
from your shoulders, through your hips, to your knees. Squeeze your glutes
together at the top whilst tilting your pelvis posteriorly (so the front of your
pelvis moves towards your ribs), and exhale. Drive your knees out slightly to
ensure they stay aligned between your hips and toes.
3) Lower your hips under control, inhaling as you descend, until you feel the
floor and drive back up again.
4) If you feel the work in the front of the thighs (quads), try performing the
exercise with your feet slightly further away from your body. If you feel the
work in the back of the thighs (hamstrings), try performing the exercise with
your feet slightly closer to the body. Find the position that maximizes the
work in the glutes.
5) Experiment with your foot width. Try it with the feet hip-width and the
toes pointing forwards, then try with the feet shoulder-width and the toes
turned out slightly. Find the spot that maximizes the work in your glutes. The
wider the feet go, the more you will need to turn your toes out.
Key Points:
Experiment with foot positioning to optimize the glute engagement.
Keep your feet fully grounded, or if you have a tendency to push
through the balls of your feet or your toes, try bringing the toes off the
ground towards your shins, leaving only your heels on the ground
To further engage the glutes, and avoid arching the lower back, tilt the
pelvis backwards (posteriorly) at the top of the movement. Bring the
front of the pelvis towards your ribs.
Aim to keep the ribs low rather than pushing them upwards towards the
top of the movement.
Breathe in on the way down, breathe out on the way up.
An alternative arm position is to bend the elbows until your forearms are
vertical, wrists over elbows, and clench your fists. Use whichever is
most comfortable for you.
Hip Thrusts
Instructions:
1) Sit on the floor with a stable bench (or similar), which is approximately
14″/35cm high, behind you. If using weight, position it just above your pubic
bone, and use cushioning if necessary. Rest your upper back, just under your
shoulder blades, onto the edge of the bench. Bend the knees, bringing the
heels closer to the body. You’ll need to check the foot positioning when you
get to the top of the movement; aim for your lower leg to be approximately
vertical. Hold your chosen weight with your hands and rest your upper arms
on the edge of the bench. Brace your core. When you are set up correctly,
your glutes are likely to be off the ground.
2) Push through your heels, lifting your hips until you have a straight line
from your shoulders, through your hips, to your knees. Squeeze your glutes
together at the top whilst tilting your pelvis posteriorly (so the front of your
pelvis moves towards your ribs), and exhale. Drive your knees out slightly to
ensure they stay aligned between your hips and toes. Tuck your chin towards
your chest as you rise, so you are looking ahead (if this is uncomfortable,
look up instead.
3) Lower your hips under control, inhaling as you descend, until you return to
your start position, and drive back up again.
4) If you feel the work in the front of the thighs (quads), try performing the
exercise with your feet slightly further away from your body. If you feel the
work in the back of the thighs (hamstrings), try performing the exercise with
your feet slightly closer to the body. Find the position that maximizes the
work in the glutes.
5) Experiment with your foot width. Try it with the feet hip-width and the
toes pointing forwards, then try with the feet shoulder-width and the toes
turned out slightly. Find the spot that maximizes the work in your glutes. The
wider the feet go, the more you will need to turn your toes out.
Key Points:
Experiment with foot positioning to optimize the glute engagement.
Keep your feet fully grounded, or if you have a tendency to push
through the balls of your feet or your toes, try bringing the toes off the
ground towards your shins, leaving only your heels on the ground
To further engage the glutes, and avoid arching the lower back, tilt the
pelvis backwards (posteriorly) at the top of the movement. Bring the
front of the pelvis towards your ribs.
Aim to keep the ribs low rather than pushing them upwards towards the
top of the movement. Aim for a neutral spine at the bottom and the
posterior pelvic tilt at the top; initiate movement from below your
breastbone (sternum).
Breathe in on the way down, breathe out on the way up.
If you’re performing a bodyweight hip thrust, clench your fists and bend
the elbows until your knuckles point upwards. Press the upper arms into
the bench.
The Step Up
Step Ups train all the major muscle groups in the lower body; Quadriceps,
Gluteus Maximus, Hamstrings, and Calf muscles. These are essentially the
same muscles as the squat, but via a different movement pattern.
So, why complete Step Ups in addition to the squat? Despite the two
exercises utilizing the same muscles, they are different in terms of movement
pattern and functionality. Step Ups are one of the most underrated exercises
for many people, but particularly for those over 50.
Step Ups have three key features that make them stand out:
1. They are one of the most simple exercises to perform, with a very low
risk of injury.
2. They are unilateral, which means you work one leg independently of
the other leg, ensuring both legs work equally within the exercise and
aiding in correcting any differences between the left and right leg.
3. They are very functional, meaning the movement pattern is one that is
required regularly in everyday life. Think about how often you have to
use stairs in a house/home/shops, use steps in an outdoor environment,
walk uphill, as well as climbing over objects and using ladders.
We can easily perform Step Ups at the gym, at home, and/or outdoors, using
a varied form of load including your body weight, barbell, dumbbells,
kettlebells, sandbags, or powerbags.
As well as varying the type of equipment used, we will also cover a variety of
types of Step Up including; Bodyweight Step Ups, Weighted Step Ups,
Lateral Step Ups, and Lateral Step Downs.
Instructions:
1) Stand with a step positioned in front of you, adjusted to your chosen
height. Have your feet hip-width apart, toes pointing forward, arms by your
side, shoulder blades back and down (chest open & shoulders relaxed), and
core braced.
2) Place your left foot firmly onto the step and position the knee over the top
of the toes (in front of the ankle). Drive through that foot, raising your body
upwards and place the right foot on the step, maintaining the hip-width
stance. Fully extend the hips and engage the glutes whilst keeping the core
braced (to keep a neutral spinal alignment). Exhale as you rise to the top and
look straight ahead.
3) Step down, under control, with your left leg and then the right, back to the
start position. Inhale as you descend.
4) You can either alternate until you have achieved the desired repetitions on
both legs, or repeat on the same leg until you have reached the desired
repetitions, and then swap. If repeating on 1 leg, follow the pattern: LRLR,
LRLR…. If alternating legs, follow the pattern: LRLR, RLRL, LRLR,
RLRL…
Key Points:
Keep a hip-width stance regardless of whether your feet are on the floor
or the step.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest proud (slightly lifted), and shoulders relaxed back and
down.
Breathe in on the way down, breathe out on the way up.
Let your arms do their natural movement as you step up and down; this
will help to maintain balance.
Push up onto the step through a fully grounded front foot; heels down.
Instructions:
1) Stand with a step positioned in front of you, adjusted to your chosen
height. Have your feet hip-width apart, toes pointing forward, arms by your
side with dumbbells or kettlebells in your hands, shoulder blades back and
down (chest open & shoulders relaxed), and core braced.
2) Place your left foot firmly onto the step and position the knee over the top
of the toes (in front of the ankle). Drive through that foot, raising your body
upwards and place the right foot on the step, maintaining the hip-width
stance. Fully extend the hips and engage the glutes whilst keeping the core
braced (to keep a neutral spinal alignment). Exhale as you rise to the top and
look straight ahead.
3) Step down, under control, with your left leg and then the right, back to the
start position. Inhale as you descend.
4) You can either alternate until you have achieved the desired repetitions on
both legs, or repeat on the same leg until you have reached the desired
repetitions, and then swap. If repeating on 1 leg, follow the pattern: LRLR,
LRLR…. If alternating legs, follow the pattern: LRLR, RLRL, LRLR,
RLRL…
Key Points:
Keep a hip-width stance regardless of whether your feet are on the floor
or the step.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest proud (slightly lifted), and shoulders relaxed back and
down.
Breathe in on the way down, breathe out on the way up.
Try to keep your arms by your sides, below the shoulders, throughout
the exercise.
Push up onto the step through a fully grounded front foot; heels down.
Instructions:
1) Stand with a step positioned to the side of you, adjusted to your chosen
height. Have your feet hip-width apart, toes pointing forward, arms by your
side, shoulder blades back and down (chest open & shoulders relaxed), and
core braced. Hold dumbbells or kettlebells in your hands, if performing the
weighted version.
2) Place the foot that’s closest to the step firmly on top and position the knee
over the top of the toes (in front of the ankle). Drive through that foot, raising
your body upwards, keeping the opposing foot suspended in the air, knee
slightly bent. Fully extend the hip on the working leg and engage the glutes
whilst keeping the core braced (to keep a neutral spinal alignment). Exhale as
you rise to the top and look straight ahead.
3) Step down, under control, until your non-working foot returns to the floor,
back to the start position. Inhale as you descend.
4) Repeat on the same leg for the desired number of repetitions, ensuring you
push through the foot on the step, not the one on the floor.
5) Change sides and repeat on the opposite leg.
Key Points:
Keep the effort in the working leg and avoid pushing off through the
non-working leg.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest proud (slightly lifted), and shoulders relaxed back and
down.
Breathe in on the way down, breathe out on the way up.
If performing the bodyweight version, let your arms do their natural
movement as you step up and down; this will help to maintain balance.
If using weights, try to keep them by the side of the body, below the
shoulders.
Push up onto the step through a fully grounded foot; heels down.
Lateral Step
Downs
Instructions:
1) Stand with a step positioned to the side of you, adjusted to your chosen
height. Stand on the step with one foot, with the other suspended over the
edge of the step. Place your hands on your hips, or hold them out for balance.
Toes pointing forward, shoulder blades back and down (chest open &
shoulders relaxed), and core braced. Hold dumbbells or kettlebells in your
hands, if performing the weighted version.
2) Hinge your hips back and bend the knee of the working leg, lowering
yourself slowly and under control until your non-working foot touches the
ground. Keep the working muscles under tension by keeping your weight in
your working leg, and just touching the ground with the non-working foot.
Inhale as you descend.
3) Drive through your top foot to return to the start position, fully extending
the hip and engaging the glutes. Keep the non-working leg suspended; try to
avoid resting it on the step, if possible. Exhale as you rise.
4) Repeat on the same leg for the desired number of repetitions, ensuring you
push through the foot on the step, not the one on the floor.
5) Change sides and repeat on the opposite leg.
Key Points:
Keep the effort in the working leg and avoid pushing off through the
non-working leg.
Descend slowly, aiming for around 3 seconds on the way down.
Ascend quicker, aiming for around 1 second on the way up.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest proud (slightly lifted), and shoulders relaxed back and
down.
Breathe in on the way down, breathe out on the way up.
If performing the bodyweight version, let your arms do their natural
movement as you step up and down; this will help to maintain balance.
If using weights, try to keep them by the side of the body, below the
shoulders.
Push up onto the step through a fully grounded foot; heels down (the
foot on the step).
The ‘Pull’
An exercise must meet all the following criteria to be categorized as a ‘pull':
Upper body movement
Compound (2 or more moving joints)
Involve pulling a load towards the upper body, or the upper body
moving toward a fixed object during the pull
Pull exercises predominantly utilize the muscles of the back (Latissimus
Dorsi, Trapezius, Rhomboids), back of the shoulders (Posterior/Rear
Deltoids), and front of the arms (Biceps). They also utilize the muscles of the
forearm to grip/hold the equipment being used.
As well as contributing towards overall upper body strength, the pull group of
exercises play an important role in daily life, including those of later years,
by improving our ability to lift objects with the upper body, pull open heavy
doors, carry objects that require grip strength such as shopping bags, and
helping to maintain a desirable upper body posture.
Upper body posture is negatively affected by modern-day living… using a
computer at a desk, using smartphones, driving cars, and children (or adults)
playing video games on consoles. Pull exercises help to recruit muscles that
become weak/under-active in the most common upper body postural
distortions, making them an integral part of any strength training program.
I have separated the pull into two separate exercise categories: the horizontal
pull and the vertical pull. This helps to work the muscles through varied
planes of motion (direction of movement), involves slightly different primary
muscle groups, changes the range of motion a muscle works through and
creates a more desirable muscle balance.
Putting the pull exercises into two separate categories also ensures you are
not over-training one type of pull and under-training the other type of pull,
and makes sure you are training these muscles in a way that they may be
required in your everyday movement patterns.
Seated Band
Row
Instructions:
1) Attach two resistance bands to a sturdy object as an anchor point, around
elbow height whilst seated. Sit on a chair or bench, facing the anchor point.
Hold a band in each hand and ensure there is a slight stretch in the bands
when the arms are outstretched. Set your feet shoulder-width with the ankles
under the knees. Look straight ahead, roll the shoulders back and down and
brace the core, creating a neutral spine.
2) Keeping your torso still, pull both elbows backwards brushing the side of
the body, and keep the forearms parallel to the floor. Squeeze your shoulder
blades together at the end of the movement. Exhale as you pull.
3) Reverse the movement until your arms are straight, but keep the tension
between your shoulder blades. Inhale as you lengthen the arms.
4) Aim for around 2 seconds in (concentric phase) and 2 seconds out
(eccentric phase).
5) Repeat for the desired number of repetitions before leaning forward to
create slack in the band before you let go!
Key Points:
The set-up will dictate the quality of the exercise, so follow step 1 above
carefully.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders relaxed back and
down.
Breathe out as you pull, breathe in as you release.
Keep your torso still and avoid leaning back or arching your back.
Consciously bring your shoulder blades together (and down) at the end
of the pull.
Your forearms should stay parallel to the floor and in line with the bands
(if you have set them up at the optimum height).
Instructions:
1) Attach one resistance band to a sturdy object as an anchor point, around
elbow height whilst standing. Face the anchor point, hold the band in one
hand and ensure there is a slight stretch in the band when the arm is
outstretched. Set your feet shoulder-width apart. If preferred, split your stance
so the left foot is forward when the band is in the right hand, and vice versa.
2) Look straight ahead, roll the shoulders back and down and brace the core,
creating a neutral spine. Unlock the knees slightly.
3) Keeping your torso still, pull the elbow backwards brushing the side of the
body, and keep the forearm parallel to the floor. Squeeze your shoulder
blades together at the end of the movement. Exhale as you pull.
4) Reverse the movement until your arm is straight, but keep the tension
between your shoulder blades. Inhale as you lengthen the arms.
5) Aim for around 2 seconds in (concentric phase) and 2 seconds out
(eccentric phase).
6) Repeat for the desired number of repetitions before switching to the other
arm.
Key Points:
The set-up will dictate the quality of the exercise, so follow step 1 above
carefully.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders relaxed back and
down.
Breathe out as you pull, breathe in as you release.
Keep your torso still and avoid twisting or arching your back.
Consciously bring your shoulder blade back (and down) at the end of the
pull.
Your forearm should stay parallel to the floor and in line with the band
(if you have set it up at the optimum height).
Kettlebell
Bent-Over Row
Instructions:
1) Deadlift the dumbbells or kettlebells off the floor. If your back
rounds/bends when picking up the weights, go down on one knee to pick
them up.
2) Set the feet hip-width apart, roll the shoulder blades back and down, brace
the core, and tip from the hip until your torso reaches 30-40º from the floor.
Ensure you maintain neutral curves in your spine (video from the side and
check, or use a mirror). Allow the weights to hang under your mid-sternum
(breastbone). Keep your neck in line with the rest of the spine with your chin
tucked slightly.
3) Keeping your torso still, pull both elbows upwards brushing the side of the
body, and keep the forearms vertical. Squeeze your shoulder blades together
at the end of the movement. Exhale as you pull.
4) Reverse the movement until your arms are straight, but keep the tension
between your shoulder blades. Inhale as you lengthen the arms.
5) Aim for around 2 seconds up (concentric phase) and 2 seconds down
(eccentric phase).
6) Repeat for the desired number of repetitions before safely placing the
weights back onto the floor.
Key Points:
Ensure you position your torso 30-40º from the floor to enable the
desired muscles to pull the weights directly against gravity.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you tip into position). Keep
your core braced, chest open (& slightly lifted), and shoulders back and
down.
Breathe out as you pull, breathe in as you release.
Keep your torso still and avoid becoming more upright as you pull.
Consciously bring your shoulder blades together (and down) at the end
of the pull.
Your forearms should stay vertical throughout.
Single-Arm Row
Target Muscles: Latissimus Dorsi, Posterior Deltoid, Mid & Lower
Trapezius, Rhomboids, Biceps
Outline: The Single-Arm Row is a great alternative if the Bent-Over Row
puts excess stress or discomfort in the lower back. A bench is used to support
the body’s position. As with the other horizontal pulls, it strengthens the
muscles of the back and biceps.
It is also another unilateral exercise, enabling you to focus on the quality of
the movement on each side individually, without your stronger side being
dominant. It also adds a core element to prevent unwanted rotation of the
trunk.
As always, choose a lightweight to start with and only progress the load when
you can comfortably perform 15+ repetitions with excellent technique.
Equipment: Bench and a Dumbbell or Kettlebell.
Single-Arm
Row
Instructions:
1) Place your chosen weight to the right of the bench. Stand on the right side
of the bench, behind the weight, and place your left knee on the bench,
underneath your left hip. Move your right foot out to the side (in line with the
opposite knee) until both sides of your pelvis are level.
2) Tip forward and place your left hand on the bench, approximately under
the left shoulder. Unlock the elbow joint. Allow the right arm to hang under
the right shoulder.
3) Brace the core and align the spine into its natural curves. Set the shoulder
blades back and down, and tuck the chin so you are looking at the bench
under your forehead. Reach for the weight with the right hand and then reset
the shoulder blade back and down.
4) Keeping your torso still, pull the right elbow upwards brushing the side of
the body, keeping the forearm vertical. Squeeze your shoulder blades
together at the top of the movement. Exhale as you pull.
5) Reverse the movement until your arm is straight, but keep the tension
between your shoulder blades. Inhale as you lengthen the arms.
6) Aim for around 2 seconds up (concentric phase) and 2 seconds down
(eccentric phase).
7) Repeat for the desired number of repetitions before switching to the other
side.
Key Points:
Ensure you position your torso so the left/right sides of your pelvis are
level and the shoulders are level.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders back and down.
Breathe out as you pull, breathe in as you release.
Keep your torso still and avoid twisting your trunk as you pull.
Consciously bring your shoulder blade back (and down) at the end of the
pull.
Your forearm should stay vertical throughout.
Inverted Row
Target Muscles: Latissimus Dorsi, Posterior Deltoid, Mid & Lower
Trapezius, Rhomboids, Biceps
Outline: The Inverted Row is a bodyweight exercise that can be adapted for
all abilities, assuming the height of the required bar can be adjusted. You can
also perform it using a suspension trainer such as a TRX®.
As with the other horizontal pull exercises, it works the back and biceps and
also requires some core and glute engagement to keep the body aligned.
You perform it by positioning yourself under a fixed bar, face-up, and pulling
your body weight up towards the bar. It is easiest when the bar is high and
you are more upright, and hardest when the bar is low and you are closer to
being horizontal. You can also adjust the difficulty by whether you keep your
legs straight (more challenging), or bend at the knees (less challenging).
Start with a relatively easy option and progress when you can comfortably
perform 15+ repetitions with great technique.
Equipment: Fixed bar such as a smith machine in a gym, Lebert EQualizer
Bars, or a suspension trainer.
Inverted Row
Instructions:
1) Adjust your bar to the appropriate height. Grip the bar with either an
overhand or underhand grip, shoulder-width apart. Lean back so your arms
are straight, keeping the shoulder blades back and down. Lift your hips by
engaging your glutes to achieve a straight line from your shoulders, through
your hips, to your knees. Brace your core and keep your spine in its neutral
curves.
2) Pull your elbows back, brushing the side of the body, lifting your torso
towards the bar. The bar should meet your body just under your chest, around
the lower ribs. If not, move your feet away, or towards the bar to correct it.
3) At the top of the movement, your forearms should be perpendicular (90º)
to your body and the shoulder blades should be pulled back towards each
other, and down the back. Exhale as you rise. Ensure the whole body stays in
alignment throughout.
4) Lower yourself by extending the arms, keeping the glutes engaged to avoid
the hips dropping towards the floor. Inhale as you lower yourself. At the
bottom, keep tension in between the shoulder blades.
5) Aim for around 2 seconds up (concentric phase) and 2 seconds down
(eccentric phase).
7) Repeat for the desired number of repetitions.
Key Points:
Ensure you engage both your core and glutes throughout to align your
body and keep a neutral spinal alignment.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders back and down.
Breathe out as you pull, breathe in as you release.
Consciously bring your shoulder blade back (and down) at the end of the
pull.
Your forearm should stay perpendicular to the body throughout.
If using a suspension trainer such as the TRX®, use a neutral grip with
the palms of the hands facing in towards each other.
Vertical Pull
A vertical row involves pulling handles/a bar towards you from above your
head, or pulling your body towards an object (e.g. a bar) above your head.
Examples of vertical pulls include Close-Grip Pulldown, Lat Pulldown, Chin
Ups, and Pull Ups.
Close-Grip
Pulldown (Resistance Bands)
Instructions:
1) Attach two resistance bands to a sturdy object as an anchor point, around
the height of your fingertips when your arms are outstretched above your
head, whilst standing. Sit on a chair or bench, facing the anchor point. Hold a
band in each hand and ensure there is a slight stretch in the bands when the
arms are outstretched. Set your feet shoulder-width with the ankles under the
knees. Lean back slightly, roll the shoulders back and down, tuck the chin to
keep the neck in its natural alignment and brace the core, creating a neutral
spine.
2) Keeping your torso still, pull both elbows down brushing the side of the
body, and keep the forearms pointing in the same direction as the bands.
Squeeze your shoulder blades together, and down into your ‘back pockets', at
the end of the movement. Exhale as you pull.
3) Reverse the movement until your arms are straight, but keep the tension
between your shoulder blades. Inhale as you lengthen the arms.
4) Aim for around 2 seconds down (concentric phase) and 2 seconds up
(eccentric phase).
5) Repeat for the desired number of repetitions before leaning forward to
create slack in the band before you let go!
Key Points:
Ensure there is some tension in the bands throughout the full ROM. You
don’t want them to go slack at any point.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders relaxed back and
down.
Breathe out as you pull, breathe in as you release.
Keep your torso still and avoid leaning back excessively or arching your
back during the pull.
Consciously bring your shoulder blades together and down at the end of
the pull.
Your forearms should stay in line with the bands throughout.
You can also perform this exercise using a lat pulldown machine in the
gym with a close-grip handle attachment.
Lat Pulldown (Machine)
Target Muscles: Latissimus Dorsi, Mid & Lower Trapezius, Rhomboids,
Biceps
Outline: This exercise is very similar to the close-grip pulldown, but is
performed with a wide grip. It is traditionally performed using a machine, but
could also be performed using two resistance bands by anchoring them high,
approximately one metre apart.
The wide grip changes the movement pattern slightly, causing more work in
the Lats and less work in the Posterior Deltoid.
Using resistance bands makes it minimal and affordable in terms of
equipment, making it more suitable for non-gym environments, but if using a
gym, it is best performed using the machine.
You can adjust resistance in relatively small increments on the Lat Pulldown
machine and should be progressed when you can perform 15+ repetitions
with excellent technique.
Equipment: Lat Pulldown Machine or; chair/bench, two resistance bands, and
a suitable anchor point.
Lat Pulldown
Band-Assisted
Chin Ups
Instructions:
1) Attach the resistance band to the middle of the bar by placing the band
over the bar, passing one end through the loop at the other end, and pulling
tight. Step one foot into the band, place both hands on the bar shoulder-width
apart, with your palms facing towards you (underhand grip). Place the second
foot into the band. Set the shoulder blades back and down, look straight
ahead and brace the core.
2) Keeping your core braced and spine neutral, pull both elbows down
brushing the side of the body, and keep the forearms vertical until your chin
is above the bar. Squeeze your shoulder blades together, and down into your
‘back pockets', at the end of the movement. Exhale as you pull.
3) Reverse the movement until your arms are straight, but keep the tension
between your shoulder blades. Inhale as you lengthen the arms.
4) Aim for around 1-2 seconds up (concentric phase) and 2 seconds down
(eccentric phase).
5) Repeat for the desired number of repetitions before stepping out of the
band one foot at a time.
Key Points:
Ensure you are using bands that are specifically for Assisted Pull Ups
because of their additional durability.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders relaxed back and
down.
Breathe out as you pull up, breathe in as you release.
Keep your torso still and avoid leaning back excessively or arching your
back during the pull.
Consciously bring your shoulder blades together and down at the end of
the pull.
Your forearms should stay vertical throughout.
You can also perform this exercise unassisted if capable or using an
Assisted Chin/Pull Up Machine in a gym.
Band-Assisted
Pull Ups
Instructions:
1) Attach the resistance band to the middle of the bar by placing the band
over the bar, passing one end through the loop at the other end, and pulling
tight. Step one foot into the band, and place both hands on the bar with an
overhand grip (palms away from you), approximately 1.5 x shoulder width.
Place the second foot into the band. Set the shoulder blades back and down,
look straight ahead and brace the core.
2) Keeping your core braced and spine neutral, pull both elbows down into
the side of the body, keeping the forearms close to vertical. Squeeze your
shoulder blades together, and down into your ‘back pockets’ at the end of the
movement. Exhale as you pull.
3) Reverse the movement until your arms are straight, but keep the tension
between your shoulder blades. Inhale as you lengthen the arms.
4) Aim for around 1-2 seconds up (concentric phase) and 2 seconds down
(eccentric phase).
5) Repeat for the desired number of repetitions before stepping out of the
band one foot at a time.
Key Points:
Ensure you are using bands that are specifically for assisted pull ups due
to their additional durability.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulders relaxed back and
down.
Breathe out as you pull up, breathe in as you release.
Keep your torso still and avoid leaning back excessively or arching your
back during the pull.
Consciously bring your shoulder blades together and down at the end of
the pull.
Your forearms should stay close to vertical throughout.
This exercise can also be performed unassisted if capable or using an
Assisted Chin/Pull Up Machine in a gym.
The ‘Push’
An exercise must meet all the following criteria to be categorized as a ‘push':
Upper body movement
Compound (2 or more moving joints)
Involve pressing or pushing a load away from the upper body, or the
upper body moving away from a fixed surface during the push/press
Push exercises predominantly utilize the muscles of the chest (Pec Major),
shoulders (Deltoids) and the back of the arms (Triceps). It is an important
movement pattern in everyday life as it enables us to perform functional tasks
such as pushing ourselves up off the floor (before we can use our legs to
stand), opening self-closing (swing) doors, and lifting objects onto tall
shelves.
Despite its important role in daily movement patterns, it’s advisable to avoid
the overuse of push exercises because the chest (pectorals) and the front of
the shoulder (anterior deltoids) are commonly overactive/tight muscles,
leading to poor posture. Over-training these muscles, compared to their
opposing muscles, can exacerbate postural problems and lead to injury.
I have separated the push into two separate exercise categories: the horizontal
push and the vertical push. This helps to provide a more balanced training
outcome because of the difference in primary muscles used between the
horizontal and vertical push, and muscles working through varied ‘planes of
motion’ (direction of movement), as well as preventing overuse of potentially
short/overactive muscles.
Raised Push
Ups
Raised Push
Ups (Lower)
¾ Push Ups
Full Push Ups
Instructions:
1) Either place your knees, or feet, on the floor and place your hands on the
surface being used. Your hands should be just outside shoulder width and in
line with your lower chest. Unlock the elbows, engage your glutes and brace
your core, creating a straight line through your body from ankles or knees,
through the hips, to the shoulders. Keep your neck in line with the rest of the
spine.
2) Keeping your core braced and spine neutral, lower your body until your
upper arms are parallel to the floor, or a little lower if possible. At the bottom
of the Push Up, the elbows should be over the wrists so your forearms are
perpendicular (at 90º to) your torso, and parallel to each other. Inhale as you
descend.
3) Press your palms into the surface you are using, pushing your torso away
from the chosen surface and extending the arms until you have a very slight
bend left in them. Keep tension between your shoulder blades to maintain the
stability of the shoulder girdle (shoulder blades and collarbones). Exhale as
you lengthen the arms.
4) Aim for around 2 seconds up (concentric phase) and 2 seconds down
(eccentric phase).
5) Repeat for the desired number of repetitions before resting.
Key Points:
Hand positioning is key… check at the bottom of the Push Up, that your
forearms are perpendicular to the body, parallel to each other, and in line
with your mid-lower chest. If someone photographed your back during
the Push Up, your torso and upper arms should create an arrow shape
(see image).
Arm Position
During Push Ups
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulder blades back and
down.
Breathe out as you push up, breathe in as you lower.
Keep your body aligned; avoid your hips rising or descending out of
alignment between knees and shoulders.
Create stability at the shoulder by keeping tension between the shoulder
blades, and feeling a subtle external screwing of your hands on the
floor/bench/wall (without them physically moving).
Dumbbell Bench Press
Target Muscles: Pectoralis Major, Anterior Deltoid, Triceps
Outline: This exercise utilizes the same muscles as the Push Up, but uses
dumbbells instead of bodyweight. This has its advantages and disadvantages;
the disadvantages include the necessity of dumbbells and a bench, requiring
either the purchase of them for home use, or gym access, and the decreased
demand on the core muscles compared to the Push Up. The advantages
include; increased stability demands at the shoulder, and simpler methods of
regression and progression (simply decreasing or increasing the weight of the
dumbbells) compared to the Push Ups.
If you can do over 15 repetitions (with good technique), you will need to
progress the weight of the dumbbells. If you would rather focus on increased
core demand, shoulder stability, and left-right muscle balance rather than
increased weight, you can progress by performing the exercise with
alternating arms, and then Single-Arm Dumbbell Bench Press.
No access to a bench? It is possible to do a floor press, where you simply
perform the same exercise lying on a mat.
Equipment: Dumbbells and a bench.
Dumbbell
Bench Press
Instructions:
1) Pick up a dumbbell in each hand (safely, without arching your back) and
lie down on a bench, placing the dumbbells close to your armpits with the
elbows under the wrists. Place the feet shoulder-width with ankles under
knees. Brace your core and press the dumbbells over the chest until the arms
are straight (elbows slightly bent), your palms are pointing toward your feet,
your wrists are in neutral alignment, and your shoulder blades are back and
down.
2) Keeping your core braced and spine neutral, lower the dumbbells, allowing
them to separate so the wrists stay over the elbows. The dumbbells should
remain in line with the mid-chest, the elbows finish level with the bench, and
your upper arms are approximately 45º angle from your body. Inhale as the
dumbbells descend.
3) Press the dumbbells back to the top position, keeping a slight gap between
them at the top. Maintain some tension between your shoulder blades to
stabilise the shoulder girdle and exhale as the dumbbells rise.
4) Aim for around 2 seconds up (concentric phase) and 2 seconds down
(eccentric phase).
5) Repeat for the desired number of repetitions before returning the
dumbbells towards the armpits, carefully sitting back up, and placing the
dumbbells safely back down.
Key Points:
Click here to view a video showing the exercise, including a safe pick
up and set-up, as well as the barbell version.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulder blades back and
down.
Breathe out as you push the dumbbells up. Breathe in as you lower
them.
Ensure your wrists always stay over the elbows, and check you have
approximately a 45º angle between the torso and upper arm at the
bottom of the exercise.
Create stability at the shoulder by keeping tension between the shoulder
blades.
Avoid locking out the elbows at the top and keep a gap between the
dumbbells to keep tension in the muscles.
From a side view, keep the dumbbells aligned with the chest.
Instructions:
1) Pick up a dumbbell in each hand (safely, without arching your back) and
position them just in front of your shoulders with your elbows under your
wrists. Either sit or stay standing. Place the feet hip-shoulder width apart.
Look straight ahead, brace your core and press the dumbbells overhead until
the arms are straight (elbows slightly bent) and in line with your ears, your
palms are pointing forward, your wrists are in neutral alignment, and your
shoulder blades are back and down.
2) Keeping your core braced and spine neutral, lower the dumbbells, allowing
them to separate so the wrists stay over the elbows until the dumbbells reach
the height of your jaw. From a side view, a line between the two dumbbells
would pass through your cheeks. Inhale as the dumbbells descend.
3) Press the dumbbells back overhead, keeping a slight gap between them at
the top, and exhale as the dumbbells rise. Stack the joints
(shoulder/elbow/wrist) on top of each other from a side view, in line with the
ears (or just in front if necessary).
4) Aim for around 2 seconds up (concentric phase) and 2 seconds down
(eccentric phase).
5) Repeat for the desired number of repetitions before returning the
dumbbells towards the front of the shoulders, flipping your elbows over the
top of the dumbbells and lowering them back down before placing them
safely onto the floor.
Key Points:
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulder blades back and
down.
Breathe out as you press the dumbbells up. Breathe in as you lower
them.
Ensure your wrists always stay over the elbows throughout the exercise.
Avoid locking out the elbows at the top and keep a gap between the
dumbbells to keep tension in the muscles. Lower them to around jaw
height for a full range of motion.
From a side view, keep the dumbbells aligned with the ears/back of the
jaw.
Single-Arm
Kettlebell Overhead Press
Instructions:
1) Pick up a kettlebell in one hand (safely, without arching your back) and
position it in the rack position; elbow into the ribs, palm towards the sternum
(breastbone) facing across your body, forearm angled in towards the middle
of the chest. You can use your other hand to help you maneuver the kettlebell
into the rack position, or watch the instruction video on how to do it through
the kettlebell clean.
2) Set your feet hip-shoulder width, unlock your knees, brace your core, and
set the shoulder blades back and down. Look straight ahead and take a breath
in.
3) As you exhale, press the kettlebell straight up overhead, turning your
palms forward. Keep a slight bend in the elbow at the top with the
shoulder/elbow/wrists stacked on top of each other from a side view.
4) Lower the kettlebell back to the rack position via a vertical path (straight
line down), finishing back with the palm facing across the body, close to the
sternum, with the elbow into the ribs. Inhale as you descend.
5) Aim for around 1-2 seconds up (concentric phase) and 2 seconds down
(eccentric phase).
6) Repeat for the desired number of repetitions before switching to the other
side.
Key Points:
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you start). Keep your core
braced, chest open (& slightly lifted), and shoulder blades back and
down.
Breathe out as you press the kettlebell up and breathe in as you lower it.
Move the kettlebell through a vertical path, straight line up and straight
line down.
Avoid locking out the elbows at the top, and finish with the palm facing
forward.
From a side view, stack the joints (shoulder/elbow/wrist) on top of each
other when the kettlebell is overhead.
You can keep your grip closed, or open, whichever is preferred.
Bodyweight
Dips
Instructions:
1) Sit on the edge of a bench with your hands placed by your sides, palms on
the bench (close to the front edge), with your thumbs pointing forwards and
fingers angled away from your sides. Lift your chest, set your shoulder blades
back and down, and look straight ahead. Place your feet hip-width apart at
your chosen distance from the bench (closer = easier, further = harder). Push
your hands into the bench, lift your bum off the bench and hover it over the
edge.
2) Lower your bum towards the floor by bending your elbows and moving
them behind your shoulders until your upper arms are horizontal. Inhale as
your body lowers. Keep your chest open and shoulders down.
3) Press your palms on the bench, straightening your arms and raising your
body away from the floor. Straighten your arms without hyper-extending
your elbows at the top. Exhale as you rise.
4) Aim for around 2 seconds up (concentric phase) and 2 seconds down
(eccentric phase).
5) Repeat for the desired number of repetitions before resting your bum back
on the bench.
Key Points:
Angle your fingers away from the sides of your body to put the shoulder
joint into a more desirable position, with your chest open and shoulder
blades back and down.
Breathe out as you push up, breathe in as you lower.
Create stability at the shoulder by keeping tension between the shoulder
blades, and feeling a subtle external screwing of your hands on the
bench (without them physically moving).
The Carry
To be categorized as a “carry”, an exercise must involve walking (potentially
jogging/running) whilst holding a weight with the upper body. We would
consider them to be a total body strength training exercise, as multiple
muscles within both the upper and lower body are under load.
As well as being great for improving overall strength (and endurance), carries
are superb for improving grip strength and our ability to perform activities of
daily living in our later years, such as carrying shopping or carrying
children/grandchildren. It’s all very well being able to lift, push and pull
loads, but our daily activities often involve walking with those loads as well.
Carries are also great for core strength when performed unilaterally with the
load held on one side of the body.
Farmer’s Walk
Target Muscles: Total body, including grip strength
Outline: The Farmer’s Walk is a great starting point for carries. It is an
excellent total body strength and endurance activity that also improves grip
strength and can also have a positive impact on the cardiovascular system.
You can perform it with dumbbells, kettlebells, or any weight that can be
held by the sides of the body. You will need one for each hand of equal
weight.
Rather than repetitions, you can monitor it through distance walked, number
of steps, or time. If you choose to carry lighter weights and focus on more
distance/time, your results will be more muscular endurance based. Whereas,
if you decide to carry heavier weights and focus on a shorter distance/time,
your results will be more muscular strength-based.
I recommend using weights that challenge you for 30s of walking,
progressing time with the same weight until you can complete 1 minute of
walking, then progressing to heavier weights and repeating the process.
Equipment: Dumbbells or Kettlebells.
Farmer's Walk
Instructions:
1) Deadlift the dumbbells or kettlebells off the floor.
2) Grip the weights by the sides of your body, set your shoulders back and
down, look straight ahead and brace your core. Walk in straight lines, back
and fore if you need to, keeping your torso as upright as possible.
3) Once the time or distance is up, or when you can no longer hold the
weights, safely place them down without rounding/bending the spine.
Key Points:
Wrap the thumb around the handles for a full grip. Maintain an open
chest with shoulder blades back and down.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you tip into position). Keep
your core braced to maintain the alignment.
Breathe naturally.
Keep your torso steady, avoiding excessive rocking or swinging.
Your arms should stay vertical next to your body throughout.
Suitcase Walk
Target Muscles: Total body, including grip and core strength
Outline: The Suitcase Walk is very similar to the Farmer’s Walk, but you
hold the weight in one hand only. This has the additional advantage of
engaging your core muscles to prevent lateral flexion (side bending) of the
spine. It also means that you can still perform it if you don’t have access to
two of the same weights.
You can perform it with dumbbells, kettlebells, or any weight that can be
held by the side of the body.
As with the Farmer’s Walk, you can monitor it through distance, the number
of steps, or time. If you choose to carry lighter weights and focus on more
distance/time, your results will be more muscular endurance based. Whereas,
if you decide to carry heavier weights and focus on a shorter distance/time,
your results will be more muscular strength-based.
I recommend using a weight that challenges you for 20-30s of walking per
side, progressing time with the same weight until you can complete 1 minute
per side, then progressing to heavier weights and repeating the process.
Equipment: Dumbbell or Kettlebell.
Suitcase Walk
Instructions:
1) Perform a Suitcase Deadlift to lift the dumbbell or kettlebell off the floor.
2) Grip the weight by the side of your body, set your shoulders back and
down, look straight ahead and brace your core. Walk in straight lines, back
and fore if you need to, keeping your torso as upright as possible.
3) Switch the weight to the other arm and repeat the same distance/time.
Once the time or distance is up, or when you can no longer hold the weight,
safely place it down without rounding/bending the spine.
Key Points:
Wrap the thumb around the handle for a full grip. Maintain an open
chest with shoulder blades back and down.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you tip into position). Keep
your core braced to maintain the alignment.
Breathe naturally.
Keep your torso steady, avoiding excessive rocking, swinging, or tilting
to the side of the weight.
Your arm should stay vertical next to your body throughout.
Allow your spare arms to swing naturally.
Rack Walk
Target Muscles: Total body, including core strength.
Outline: The Rack Walk is another one-side carry, but you hold the weight in
the ‘rack’ position as outlined in the Kettlebell Overhead Press. There is no
grip strength in the Rack Walk, but eliminating this element stops it from
being a limiting factor, allowing you to focus on the other benefits of the
exercise. It enhances core strength but does not place the same demands on
the core to prevent spinal lateral flexion, compared to the Suitcase Walk.
It is best performed using a kettlebell but can be replaced by a dumbbell if
necessary.
As with the previous two carries, you can monitor it through distance walked,
number of steps, or time. If you choose to carry lighter weights and focus on
more distance/time, your results will be more muscular endurance based.
Whereas, if you decide to carry heavier weights and focus on a shorter
distance/time, your results will be more muscular strength-based.
I recommend using a weight that challenges you for 20-30s of walking per
side, progressing time with the same weight until you can complete 1 minute
per side, then progressing to heavier weights and repeating the process.
Equipment: Kettlebells (or Dumbbell).
Rack Walk
Instructions:
1) Perform a Suitcase Deadlift to lift the kettlebell off the floor.
2) Transition the Kettlebell into the rack position, either through the help of
the spare hand or through the Kettlebell Clean shown in the exercise video
library.
2) Set your shoulders back and down, look straight ahead and brace your
core. Walk in straight lines, back and fore if you need to, keeping your torso
as upright as possible.
3) Switch the weight to the other arm and repeat the same distance/time.
Once the time or distance is up, or when you can no longer hold the weight,
safely place it down without rounding/bending the spine.
Key Points:
Use either a closed grip or open palm. Maintain an open chest with
shoulder blades back and down.
Keep a neutral curve in your spine. Achieve this by tilting the pelvis
fully forwards, then backwards, then finding a midpoint with a slight
inward curve of your lower back (before you tip into position). Keep
your core braced to maintain the alignment.
Breathe naturally.
Keep your torso steady, avoiding excessive rocking, swinging, or tilting
to the side.
Allow your spare arms to swing naturally.
8 Week Program
To support you in putting the content of this book into practice, I have
produced an 8 week beginner program for you to follow. There is also a
printable PDF version in the bonus material.
Before we get to the 8 week program, I want to recap on some of the
terminology that I refer to in the programs, and also cover some key
information on the planning and progression of your strength training.
Terminology Reminder
Repetitions (reps): how many times you perform an exercise. ’10 reps’
means that you perform the exercise 10 times before stopping and resting.
Sets: a set is a group of repetitions. 2 sets of 10 reps = 10 reps - rest - 10 reps
- exercise finished.
Load: the ‘weight’ of the equipment that the muscles are producing force
against. E.g. weight of a barbell or dumbbells.
Rest: the time taken to rest and recover between sets.
To provide yourself with the tools needed to progress appropriately to your
individual needs, let’s have a look at strength training planning and
progression.
Planning
Frequency
The World Health Organization (WHO) recommends that adults (aged 18-64)
and older adults (aged 65+) should perform muscle-strengthening activities at
a moderate or greater intensity that involve all major muscle groups on 2 or
more days a week.
Based on this, I recommend 2-3 sessions per week of strength training,
combined with additional exercise that targets other components of fitness
covered in the rest of the Simple Fitness After 50 series.
Volume
I’m a strong believer in quality over quantity when it comes to strength
training.
The essential eight movement patterns outlined in this book give you a
foundation for safe, effective, no-nonsense strength training exercises and
should form the basis of your muscle-strengthening activities.
I recommend 20-60 minutes, including warm up and cool own activities per
session. Volume is a variable that can be progressed, therefore I suggest
starting with 20 minute sessions and increasing volume when you feel
conditioned enough to do so.
Exercise Selection
Plan your exercises as per the example 8 week program, so that on a weekly
basis you are creating a balance between the number of pull exercises versus
the number of push exercises.
Include a variety of hip hinge, squat, and step up activities throughout each
week, and include a ‘carry’ in each session.
Exercises within each of the essential eight categories vary in difficulty. Start
with the easier versions, those that are outlined at the beginning of each
category in The Essential Eight chapter, and aim to increase the difficulty as
and when you feel ready. There are additional exercises in the video exercise
library which you can access through the bonus material.
Exercise Order
The 8 week programs are ordered in a logical sequence to give working
muscles some recovery time before being used again.
They also mostly alternate between lower body and upper body exercises.
This will provide your body with a cardiovascular benefit as the heart has to
distribute blood to working muscles in different areas of the body each time
you change exercise. This is referred to as Peripheral Heart Action (PHA).
Reps
As outlined earlier in the book, the number of repetitions and the associated
load lifted in a strength training exercise changes the training effect.
Lifting very heavy for <6 reps improves your ability to lift very heavy objects
very few times. This is termed Muscular Strength. Lifting low weights for
>12 reps improves your ability to overcome light loads multiple times. This is
termed Muscular Endurance.
In between these two, in the 6-12 rep range is hypertrophy training. This
range focuses on increasing muscle mass, increasing resting metabolic rate
and therefore fat loss through increased daily energy expenditure, as well as
some gains in muscular strength and muscular endurance.
Avoiding very heavy loads and very high repetitions also minimizes the risk
of injury associated with strength training.
Based on this, I recommend focusing on a broad range of 8-15 repetitions.
With the higher end of 12-15 reps being less challenging due to the relatively
lighter loads lifted, and the lower end of 8-10 reps seen as more challenging
due to the relatively higher loads lifted.
Whenever you attempt a new exercise, perform it with no/low weight and at
the higher end of the 8-15 rep range to learn the exercise through more
repetition.
Sets
I have planned for 2 sets on your 8 week example programs, primarily to
focus on quality over quantity, and time efficiency. Two good quality sets
will be more effective than 3 mediocre sets. However, if you have time and
feel you would benefit from performing a third set, then go ahead. Anything
beyond 3 sets is unnecessary for most people.
It’s important to think about the balance between push and pull exercises,
though. If you change to 3 sets of the push exercise(s) then you need to
change to 3 sets of the pull exercise(s) too.
Intensity
Once you’ve decided on the number of repetitions you’ll perform, and you
have mastered the technique of an exercise, it’s important to apply the
principle of progressive overload to your training, to ensure you maximise
your results.
The principle of progressive overload simply states that unless you provide
your body with a stimulus that is above and beyond what it’s used to, it will
not adapt.
In strength training, this means that it needs to be a challenge to complete the
full set with good technique. If you get the intensity right, you should be able
to complete the set but feel you cannot complete more repetitions.
If you finish the set and feel you could have continued, with good technique,
then you should increase the load on the next set or session to increase the
intensity. If you cannot finish the set without your technique deteriorating,
lower the load slightly on the next set or session.
Rest
A standard rest period between sets, for a rep range of 8-15, is 1-2 minutes. I
would suggest you base this on how hard you are working in the exercises,
your fitness levels, and whether you are aiming to keep your heart rate up for
cardiovascular benefits.
Reasons to keep the rest period around 1 minute include; you’re lifting light
weights to focus on technique, you have relatively high fitness levels, and/or
you’re aiming to keep your heart rate elevated.
Reasons to have a rest period of around 2 minutes include; you’re lifting
heavy and need longer to recover before the next set, you have relatively low
fitness levels, and/or you are doing other training dedicated to your
cardiovascular fitness.
Use 1-2 minutes of rest as a guide, and base it on the information above and
how you feel at the time.
Tempo
As covered in the General Exercise Technique chapter, I recommend a 2-0-2-
0 tempo or a 2-0-3-0 tempo to start with. These numbers mean that whenever
the load is rising against gravity, allow 2 seconds for the movement to occur
(the first 2), avoid pausing (the 0) and then take 2-3 seconds for the load to
lower towards the floor, and repeat without pausing (the other 0).
This is a safe tempo because it avoids rapid, uncontrolled movements that
may put unnecessary stress on the joints, muscles and connective tissue, but
is also an effective tempo as the muscles have sufficient time under tension
(TUT), particularly during the lowering phase when gravity can do the work
for you!
Use the 2-0-2-0 tempo as your standard tempo. If, during the last few
repetitions of a set, you are finding the exercise easy, slow down the phase of
the exercise where the load lowers/descends to 3 seconds to create a 2-0-3-0
tempo.
Progressing
To achieve results, you need to gradually progress your strength training.
Often referred to as Progressive Resistance Training (PRT) in research
papers, it’s a vital aspect of continually seeing results and achieving goals.
There are several variables that you can progress. I do not recommend
progressing these all at once, but choosing the most appropriate to you and
making minor changes as often as possible. Think little and often.
Increase Load
Initially, this is likely to be the most important variable to progress gradually.
Remember, your muscles will only adapt and become stronger/bigger if you
provide them with a stimulus greater than what they are used to. So if you
keep lifting the same weights, you are providing the same stimulus which
your body gets used to.
You are also likely to see some significant increases in strength during the
first few months of training due to neuromuscular adaptations; your nervous
system and muscular system adapt to become more efficient at
communicating with each other to produce the necessary force, coordination
and stability to carry out the exercise.
This accumulates to significant early progress. Since your strength is likely to
increase, you need to respond by increasing the stimulus (the load in this
case) to keep up the progress. Remember, listen to your body and progress in
small increments and only as often as you feel is appropriate.
Increase Repetitions
As you get stronger, you will be able to lift the same load more times. This
would be an increase in repetitions. So lifting 10kg 12 times and then a
couple of weeks later lifting the same 10kg 15 times shows a progression in
repetitions. Although this is a progression, it is unlikely that this is the most
appropriate progression for you.
We discussed the muscular outcomes of strength training earlier, outlining
the difference between muscular strength, muscular hypertrophy, and
muscular endurance. We also determined that a hypertrophy rep range of 6-
12, is likely to be most relevant to the goals of this over 50. So if you focus
your progressions on increasing reps, you may end up well into the muscular
endurance range, which may not align with your goals.
I suggest using a rep range and increasing repetitions within that rep range
over several weeks. When you can comfortably achieve the highest number
of reps in that range, it’s time to focus on another progression rather than
increasing reps more.
For example, you plan your rep range to be 10-12. You start week 1,
performing 10 reps of each exercise, and by week 2 you may get to 10 and
feel like you can do one more, so you continue to 11. In weeks 3-4, you are
achieving a comfortable 12 reps of each exercise. The next step would be to
increase the load (or another progression if more appropriate) and go back to
10 reps and repeat the process.
Increase Sets
The number of sets won’t change too significantly, but it largely affects the
volume of the session and, therefore, the time. I suggest 2-4 sets of each
exercise, starting with 2 sets.
Sets are not a vital progression, but if you want to increase the volume of the
session or you feel you aren’t quite getting enough out of 2 sets, then
progress to 3 and then potentially 4 in the future.
Over 3 sets are unnecessary for most people, and more than 4 is very unlikely
to have any noticeable benefit to your results, and may increase your risk of
injury due to fatigue.
Decrease Rest
Rest time is relevant to the training outcome. Muscular hypertrophy training,
between 6-12 repetitions, requires a rest time of approximately 1-2 minutes.
It’s recommended to start this at the higher end, and gradually reduce it as
your recovery between sets improves.
If you have just increased the weight/load on your exercises, it’s a good idea
to increase your rest time temporarily while you adapt to the additional
weight.
Increase Complexity
Performing the same exercises for weeks and months can get a little boring
over time, so progressing the exercise often by making it a bit more complex
can keep things interesting and progress your training at the same time. I’ve
provided a few exercise progressions in the 8-week plans, and you can find
more variations in the bonus material.
Increase Volume & Time
If you feel you want to make your training sessions longer, you can always
progress volume via the number of exercises you perform. A strength training
session, including warm up and cool down, should last anywhere from 20 to
60 minutes.
Start with around 20 minutes and if you have the desire, increase to 40
minutes. If you want to increase the length of the session beyond 40 minutes,
then I suggest including other components of fitness such as mobility,
flexibility, balance and core. We will cover these in-depth in books 2-6 of the
Simple Fitness After 50 series.
One important point to remember when increasing the number of strength
training exercises performed is program balance, particularly between pushes
and pulls, as outlined earlier in this chapter. If you imbalance the program
between pushes and pulls, ensure you have more pulls than pushes.
Increase Frequency
Increasing the frequency of training, how often you complete a session, is a
progression. However, there becomes a point where the increased frequency
can become detrimental to your results. As there are many components of
fitness that are important to those over 50 (covered in the Simple Fitness
After 50 Series), I recommend starting with a strength training frequency of
two sessions per week, and progressing to three sessions per week once it
becomes more of a habit.
Conclusion
Thank you so much for taking the time to read Fundamental Strength
Training After 50. I’m truly grateful to you all and hope that you found it to
be informative and helpful towards your health & fitness goals.
If you enjoyed this book, please consider letting other people know by
leaving a review on Amazon.
Amazon reviews are incredibly helpful – both for self-published authors like
myself to get the word out, and also for other potential readers to decide
whether this book will be useful to them. Thank you in advance, I’m truly
grateful for your support.
Links to create a review:
USA: https://amazon.com/review/create-review?&asin=B0B1Z7443J
UK: https://amazon.co.uk/review/create-review?&asin=B0B1Z7443J
AUS: https://amazon.com.au/review/create-review?&asin=B0B1Z7443J
CAN: https://amazon.ca/review/create-review?&asin=B0B1Z7443J
DE: https://amazon.de/review/create-review?&asin=B0B1Z7443J
ES: https://amazon.es/review/create-review?&asin=B0B1Z7443J
FR: https://amazon.fr/review/create-review?&asin=B0B1Z7443J
IT: https://amazon.it/review/create-review?&asin=B0B1Z7443J
NL: https://amazon.nl/review/create-review?&asin=B0B1Z7443J
IN: https://amazon.in/review/create-review?&asin=B0B1Z7443J
Thanks again!
Healthy Regards,
Mike
Author Bio
Mike is a 1:1 Online Fitness Coach, Fitness Educator and Author living in the
UK.
Mike obtained a degree in Sport & Exercise Science at University and has
since spent over 20 years in the fitness industry. He currently runs Lifetime
Fitness Coaching, The Fitness Education Hub, as well as writing and teaching
fitness industry qualifications in Spain and Malta. More recently, Mike has
also become a self-published fitness author.
Mike currently specialises in three main areas:
1) Coaching and educating adults over 50 years of age to lose weight,
maximize their health & fitness, increase their functional capabilities in daily
activities and sports, and reduce their risk of future health problems
associated with a sedentary lifestyle.
2) Educating future fitness professionals to obtain their Gym Instructor,
Personal Trainer, and CPD qualifications with the European Personal
Training Institute, at their campuses in Spain and Malta. Mike has been
tutoring and assessing fitness qualifications for over 15 years and prides
himself on explaining complex subjects in a logical, easy to understand, and
fun way.
3) His latest venture focuses more on online entrepreneurship within the
fitness industry. Working on multiple online revenue streams and passing this
knowledge on to current Fitness Professionals to enhance their online
revenue streams. This includes areas such as self-publishing ebooks, online
course creation, online fitness coaching, email marketing, blogging, and
eCommerce.
Mike Wilson
Coming Soon