Scribd
Upload
35 views15 pages

Us Android User Guide

Uploaded by

akhirayen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views15 pages

Us Android User Guide

Uploaded by

akhirayen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

U L T R A S O N I C D E V I C E US-ANDROID

On ANDROID systems

The US-Smart allows an ultrasonic control using the USB between the
couple probe / US Android and your tablet or smartphone.

This device can also allows to realize various kinds of inspections such
as welds, rails inspections, composite materials…
General Description

This ultrasonic device is powered supply via USB .

His main quality is its small size and its ‘ready to use’ concept.

The US-ANDROID has been created to simplify the NDT controls.

The transmitter can generate pulses with a voltage level and a width

programmed by the user. A low noise preamplifier combined to a VGA

gives a gain range between 0 and 80 dB, a DAC curve is also available. A

12 bits analog digital converter with a sampling frequency of 80 MHz is

used to digitize ultrasound signals.

The device has 2 working modes : Transmission or Reflection.

Features

USB

Android System

Ultralow noise preamplifier : 0.74 nV / √Hz -6dB

bandwidth : 540 KHz to 18MHz

High voltage transmitting pulses

50 Ω load drive

Digitizer 12 bits at 80 MSPS

Programmable gain : 0 to 80 dB

DAC curve
Software

To get menu slide your finger from the left to the right

On the top of the screen or on the left-bottom part.


Gain :
Control the receiver amplifier Gain
You can adjust the gain with the menu on left
Add /take off 3 / 1 / 0.1 dB or give the gain
Or put your finger on the screen and move it to the top.

Scale :
Control the sampling time
You can adjust the time/div with the menu on the left
Add /take off 1 / 0.2 / 0.05 µs/div
Or put your finger on the screen and move it.
Delay :
Control the sampling delay
You can adjust the sampling delay with the menu on left
Add /take off 10 / 1 / 0.1 µs Or put
your finger on the screen and move it.

Gates :
Give you access to the three gates of control to measure
- the amplitude into the gate
- the distance of the echo
- some alarme
You have access to three gate (1/2/3) that can be controle in position, width and height.
Position will allow you to place the start of the gate.
Width will allow you to adjust the width of the gate
Transmitter give an access to differant parameters :
- Voltage : amplitude of the transmitter pulse 0/-230V
- Frequency : 1 to 20 Mhz ( centrale frequency probe)
- Pusle Repetetivity Frequency ( 200Hz to 10Khz)
- Single/double crystal (depending of your application)

Transmitter Voltage set the amplitude of the transmitter pulse


0 to -250 V
Transmitter Frequency :
Set the width of the pulse ie the centrale frequency of the transducer

TGC curve :
Allow to change the gain during the acquisition
CAD :
Display amplitude – distance curve

THRESHOLD :
All the ascan data under a thershold will be set to 0. The threshold value can be adjust .
MEASUREMENT UNIT/VELOCITY :
Set the ultrasound speed and specify the display unit (mm or µs)

SIGNAL ANALISYS TOOLS:


Alow you to add cursor to measure distance/amplitude on the ascan.
SAVE/RECALL :
Save or recall some configuration.

OPTIONS:
Control / Probe /Filter / Display Speed / Gate option / System option access
Control :
Allow you to set the reference amplitude value, the reference gain and thickness

Probe :
Allow you to set the angle of the probe , add some delay.
Filter :
Select the filter for the receiver , a FIR filter will be applied on rf data.

Display speed
Gate Option :
Fill the zone between the origin axis and the gate or between the two gate.

System :
Allow to setup some option , color of the ascan or the langage…..
QUIT : Leave the Us-Android apk.

You might also like