Module 1 Noise Control (Unit 3)
Module 1 Noise Control (Unit 3)
Module 1 Noise Control (Unit 3)
Recommendations
• Site planning- sited away from noisy sources, planning for noisy activities in the school
premises to be sited away from spaces requiring quiet environment.
• Internal planning - Grouping, windows and ventilators, doors, acoustic sliding partitions,
open planning and circulation areas, furniture
• Noise reduction within rooms - suitable reverberation times are required based on the
functional requirement (shorter reverberation times are desirable whenever possible).
Attention to be specially given while designing for hearing impaired and visually impaired
persons to ensure adequate reverberation time.
• Sound insulation- reduction of air borne noise and impact noise (minimum sound
reduction between different rooms is 45dB)
Indoor noise- A hospital is a complex building with many services and the numerous internal
sources of structure-borne and air-borne noises are grouped into three main categories:
a) Noise consequent upon hospital routines. This category includes sources which transmit
noise through both structure-borne and airborne paths, many of which may be quite near
to patients particularly those in wards.
b) Loudspeaker, radio or television, audible call system, telephone bells and buzzers, and
other air-borne noises, such as loud conversation.
c) Noises from fixed or mobile equipment and services not directly concerned with hospital
routines.
Recommendations
Site planning- sited away from noisy sources
Detailed planning - arranging of spaces based on functions and numerous other factors.
Reduction of noise at source - use of resilient materials, other measures
Reduction of noise by structural means - Insulation, Absorption
OFFICE BUILDINGS
Modern office buildings are often noisier than older buildings due to the use of thinner and
more rigid forms of construction, harder finishes, more austere furnishings and use of business
machines.
Sources of noise nuisance - Indoor noise from various machines and equipments,
conversations, footsteps etc.
Indoor noise- Main sources of indoor noise include the following:
a) Office machines, such as typewriters, and printers;
b) Telephonic conversation;
c) Noise from the public admitted to the building;
d) Footsteps, voices and slamming of doors in circulation spaces, lift doors and gates;
e) Sound reproduction in staff training rooms, conference rooms and recreation rooms, etc;
f) Handling of crockery and utensils in canteens and kitchens; and
g) HVAC and lift machinery.
Recommendations
• Site planning- Rooms demanding quiet conditions should be placed on the quiet side of the
site. Even on quiet thoroughfares, these rooms should also not be planned at street level.
• Detailed planning - noise reduction within rooms (reverberation time should not exceed
1sec @500 Hz), large general offices, lightweight construction, open plan offices, office
equipment rooms, banking halls, public offices and waiting spaces, canteen, circulation
space
• Requirement of sound insulation- With open window (single or double) the sound
reduction (Dw) will be 5-10dB, and with sealed double windows it will be 40-45dB.
Intermediate values are obtainable with closed openable windows (single or double) but
only, of course, at such times as ventilation may be dispensed with.
Recommendations
• Site planning –
• Internal planning -
Internal planning- Noisy places should be kept separate from the quiet ones. The location of
laboratories or test houses should be so chosen that it is cut off from the noisy zones. Where
there are offices attached to a laboratory, provision should be made to treat the offices and to
use acoustical partitions, to achieve a sound isolation Dw of at least 35 dB.
Miscellaneous buildings
Law courts & Council Chambers
Libraries, Museums & Art Galleries
Auditoria & Theatres
Noise from building services