Equilibrium of Forces - ClassNotes - NG
Equilibrium of Forces - ClassNotes - NG
ng
REGISTER LO G I N
Equilibrium of Forces
Back to: PHYSICS SS2
Welcome to class!
In today’s class, we will be talking about the equilibrium of forces. Enjoy the class!
Equilibrium of Forces
An object is in equilibrium when it is not accelerated, that is there is no force acting on it in any direction. For a body in equilibrium, the forces acting on it are so related in
magnitude and direction that no acceleration results.
A body is said to be in equilibrium when the body as a whole either remains at rest or moves in a straight line with constant speed and the body is either not rotating at all or is
rotating at a constant angular velocity.
FORMS OF EQUILIBRIUM
1. Static equilibrium: This is when a body is at rest or moving with constant velocity.
2. Dynamic or Kinetic equilibrium: This is when a body is moving with a constant velocity in a straight line or rotating with a constant angular velocity about a fixed axis
through its centre of mass.
A body acted upon by two or more forces is said to be in equilibrium if it does not move or rotate. Under this condition, the sum of the forces moving the body in one direction
is equal to the sum of the forces pushing the body in the opposite direction. In the force board experiment, the resultant R of two forces P and Q acting at point O was found by
the parallelogram method to be equal in magnitude but exactly opposite in direction to the third force that kept the point O in equilibrium. This third force is known
as EQUILIBRANT FORCE.
The Resultant force is that single force which acting alone will have the same effect in magnitude and direction as two or more forces acting together.
The Equilibrant of two or more forces is that single force which will balance all the other forces taken together. It is equal in magnitude but opposite in direction to the resultant
force.
This is a pair of equal and parallel force acting on a body in opposite direction and whose lines of action do not coincide, which results In the direction of the body about its axis
while Torque is the turning effect of a couple.
The three forces that keep a body in equilibrium can be represented in magnitude and direction by the three sides of a triangle as shown below
OB represents the force Q in magnitude and direction, OA represents the force P both in magnitude and direction and CO represents the equilibrium E in magnitude and
direction. The triangle shown below shows below is the vector representation of the three forces acting at O.
The principle of the triangle of forces states that if three forces are in equilibrium, they can be represented in both magnitude and direction by the three sides of a triangle taken
in order.
MATHEMATICAL EXPRESSION
Where = angle BAC, the angle between the forces P, Q = 180° – angle ADB.
R2 = AB2 + DB2
WORKED EXAMPLES
(1) The two forces of 20N and 40N, act at a point and angle between them is 30°. Find the resultant force.
SOLUTION
Resultant:
(2) if a force P of 40N acts in the direction due East and another force Q of 30N acts in the direction due North, calculate the resultant of these two forces.
SOLUTION
By Pythagoras theorem
MOMENT OF A FORCE
When we turn on a tap, tighten a nut with a spanner or screw a nail in or out of wood with a screwdriver, we are exerting a turning force and producing a turning effect about a
point along an axis. Such a turning effect brought about in each case is called MOMENT OF A FORCE.
Therefore, the moment of a force about a point or axis is defined as the product of the force and the perpendicular distance of its line of action from the point.
Moment = force x perpendicular distance of the pivot to the line of action of the force. It is a vector quantity and its S.I. unit is Newton – meter (NM).
PRINCIPLE OF MOMENTS
The principle of moments states that if a body is in equilibrium then the sum of the clockwise turning moments acting upon it about any point equals the sum of the
anticlockwise turning moments about the same point.
From fig. a above, clockwise moment about O is given as F2x2 while the anticlockwise moment is F1x1. Therefore, the sum of the moment is given as F2x2 – F1x1. If the bar is in
equilibrium,
F 2x 2 – F 1x 1 = 0
F 2x 2 = F 1x 1.
F 1x 1 – F 2x 2 + F 3x 3 – F 4x 4.
F 1x 1 – F 2x 2 + F 3x 3 – F 4x 4 = 0
F 1x 1 + F 3x 3 = F 2x 2 + F 4x 4.
CENTER OF GRAVITY
The centre of gravity of a body is defined as the point through which its resultant weight acts.
1. The algebraic sum of the forces acting on the body in any direction must be zero. That is the Sum of upward forces = Sum of downward forces.
2. The algebraic sum of the moments acting on the body in any direction must be zero. That is the Sum of CW moment = Sum of ACW moment.
3. The total resultant force must be zero
1. The vector sum of all the forces acting on the body must be zero. That is, Σx = 0 and Σy = 0.
2. The algebraic sum of the moments acting on the body in any direction must be zero. That is the Sum of CW moment = Sum of ACW moment.
3. The line of action of the forces must meet at a point
WORKED EXAMPLE
(1) A metre rule is found to balance horizontally at the 48cm mark. When a body of mass 60g is suspended at the 6cm mark, the balance point is found to be the 30cm mark.
Calculate the:
(ii) Distance of the balance point from the zero end of the body was moved to the 13cm mark.
SOLUTION
Let the distance of the new balance point be x from zero end
In our next class, we will be talking about the Equilibrium of Bodies in Liquid. We hope you enjoyed the class.
Should you have any further question, feel free to ask in the comment section below and trust us to respond as soon as possible.
Watch FREE Video Lessons for Best Grades & Academic Success
← Previous Lesson
Projectiles
Next Lesson →
Equilibrium of Bodies in Liquid
PRINCESSCHARLES109
OCTOBER 8, 2022 AT 2:05 PM
Please how could we know how to represent the three magnitude and direction in the triangle
Reply
JONESIFEGWU
OCTOBER 10, 2022 AT 5:25 PM
Reply
JONESIFEGWU
OCTOBER 16, 2022 AT 10:15 AM
Reply
LAWAL
FEBRUARY 6, 2023 AT 8:49 PM
What is the formula for Mass of meter rule,and the distance from the balance point.
Reply
Leave a Reply
Your email address will not be published. Required fields are marked *
Comment *
Name*
Email*
Website
Save my name, email, and website in this browser for the next time I comment.
Post Comment
Student’s Menu
Dashboard
My Courses
My Achievements
Edit Account
Sign Out
PRIMARY 6
First Term
Position, Distance and Displacement
Physical Quantities
Equations of Motion
Projectiles
Equilibrium of Forces
Equilibrium of Bodies in Liquid
Introduction to Simple Harmonic Motion (SHM)
Second Term
Third Term
08051544949, 09032253648
08051544949
COMMUNITY
About CN
Teach for CN
Testimonials
Faculty
Careers
Blog
Affiliate
Press
Terms of use
Privacy Policy
WEEKLY NEWSLETTER
Name
Your Email
SUBSCRIBE