VN8 SERIES ELECTRIC CONTROL VALVES
FOR FAN COIL UNITS
PRODUCT INFORMATION
TECHNICAL PARAMETERS
ACTUATOR
Operating power supply: 220VAC±10%, 110VAC±10%
24VAC±10%, 50/60Hz
Control mode: Electric 3-wire on-off
Non-spring return
Working temperature: 0~65°C
Working condition 10%~90%RH without condensate water
relative humidity:
Power consumption: ≤6W (50Hz); ≤7.5W (60Hz)
Actuation time: Switch on≤15s, switch off≤15s
Protection rating: IP42
SCOPE OF APPLICATION
VN8 series electric control valves can be used at home and in commercial buildings to control the flow of hot or cold liquid.
Each set includes electric actuator and valve body.
The VN8 series offer a wide range of options in voltages and thread standards according to the usage of different regions and
provides two-way and three-way valve bodies to meet most of the requirements in buildings control.
VALVE BODY
Applicable medium: Cold, hot water or 50% glycol solution
Fluid temperature range: 0~94°C
Working temperature: 0~65°C
Working condition relative humidity: 10%~90%RH
Nominal pressure: PN20
Leak-rate: 0.05%Kvs
Materials: Valve body and ball — forging brass (HPb59-1)
Valve rod — stainless steel (0Cr18Ni9)
Valve seat — polytetrafluoroethylene (PTFE)
O-sealing ring — Ethylene-Propylene-Diene Monomer (EPDM)
ORDERING PART NUMBERS (220Vac only shown as example)
NOMINAL CLOSE-OFF DIFFERENTIAL
PART SIZE CONNECTION FLOW
VOLTAGE FLOW PRESSURE
NUMBERS (diameter) TYPE RATING (Kvs) (PSI) (MPa)
VN82C15PP 220Vac±10% 2-way DN15, 1/2" BSPP 4.0±10% 87 0.6
VN82C15PT 220Vac±10% 2-way DN15, 1/2" BSPT 4.0±10% 87 0.6
VN82C15NT 220Vac±10% 2-way DN15, 1/2" NPT 4.0±10% 87 0.6
VN82C20PP 220Vac±10% 2-way DN20, 3/4" BSPP 7.0±10% 87 0.6
VN82C20PT 220Vac±10% 2-way DN20, 3/4" BSPT 7.0±10% 87 0.6
VN82C20NT 220Vac±10% 2-way DN20, 3/4" NPT 7.0±10% 87 0.6
VN82C25PP 220Vac±10% 2-way DN25, 1" BSPP 8.0±10% 87 0.6
VN82C25PT 220Vac±10% 2-way DN25, 1" BSPT 8.0±10% 87 0.6
VN82C25NT 220Vac±10% 2-way DN25, 1" NPT 8.0±10% 87 0.6
VN83C15PP 220Vac±10% 3-way DN15, 1/2" BSPP 4.2±10% 87 0.6
VN83C15PT 220Vac±10% 3-way DN15, 1/2" BSPT 4.2±10% 87 0.6
VN83C15NT 220Vac±10% 3-way DN15, 1/2" NPT 4.2±10% 87 0.6
VN83C20PP 220Vac±10% 3-way DN20, 3/4" BSPP 8.0±10% 87 0.6
VN83C20PT 220Vac±10% 3-way DN20, 3/4" BSPT 8.0±10% 87 0.6
VN83C20NT 220Vac±10% 3-way DN20, 3/4" NPT 8.0±10% 87 0.6
VN83C25PP 220Vac±10% 3-way DN25, 1" BSPP 14.0±10% 87 0.6
VN83C25PT 220Vac±10% 3-way DN25, 1" BSPT 14.0±10% 87 0.6
VN83C25NT 220Vac±10% 3-way DN25, 1" NPT 14.0±10% 87 0.6
Note: For other models, please consult our product department
PRODUCT IDENTIFICATION SYSTEM
VN 8 2 C 15 PP
Non-spring return Connection type:
electric control valve PP=BSPP PT=BSPT NT=NPT
Series 8 Size:
15=DN15 20=DN20 25=DN25
Flow
2 = two-way Nominal voltage:
3=three-way A=24VAC B=110VAC C=220VAC
DIMENSION (mm)
77 60
PART DIMENSION (mm)
NUMBERS A B C
78
VN82X15XX 51.5 100 —
B
OFF
VN83X15XX 56 100 42
VN82X20XX 60 100 —
VN83X20XX 67 100 53
Honeywell
VN82X25XX 66 105 —
VN83X25XX 83 105 62
A C
(3-Way)
WIRING DIAGRAM
Temperature Actuator
controller
Valve close
N.C. Red
Yellow Valve open M
L N.0.
Blue
N Common
Honeywell Environmental and
Combustion Controls (Tianjin) Co., Ltd.
No. 158, Nanhai Road, Tianjin
Economic-Technological Development Area
Postal Code: 300457
Tel: +86-22-66287000
Fax: +86-22-25325214
All specifications are subject to change without notice. HBT-G.C.-Building-VN8-OCT-2019-CN01
