NATIONAL AEROSPACE STANDARD

© COPYRIGHT 2014 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED

FED.SUPPLY CLASS

5330
W
A
TOL D B
5
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC

PACKING /1/
ØA ØID ØE /1/
ARLINGTON, VA 22209
1000 WILSON BLVD.

RETAINER /2/
- A-
A

125
125
.030 A
C - B-
.002 C - C-

SECTION A-A

PRESSURE
DIRECTION INSTALLATION
PRODUCT AND SHALL BECOME EFFECTIVE NO LATER THAN SIX MONTHS FROM THE LAST

INSTALLATION HOLE DIA.

THIS DRAWING SUPERSEDES ALL ANTECEDENT STANDARD DRAWINGS FOR THE SAME

HOLE DIA.
INSTALLATION

REVISION DATE: MARCH 31, 2014

HOLE DIA.

5 FIGURE 1 – TYPICAL INSTALLATIONS

MATERIAL:

RETAINER:
ALLOY STEEL 4130 (UNS G41300) PER AMS6350, AMS6351 OR AMS6345; HEAT TREATED TO
5 26-33 HRC.
CRES 301 (UNS S30100) PER AMS5901 OR AMS5518; OR CRES 302 (UNS S30200) PER AMS5516
OR AMS5904; OR CRES 304 (UNS S30400) PER AMS5513 OR AMS5911. ISSUE DATE: AUGUST 1969

ALUMINUM ALLOY 7075-T6 (UNS A97075) PER AMS-QQ-A-250/12.

PACKING:
SEE TABLE II.
REVISION DATE.

THIRD CUSTODIAN REVISION

ANGLE
PROJECTION NATIONAL AEROSPACE STANDARDS COMMITTEE 5
PROCUREMENT TITLE CLASSIFICATION
FORM 09-01

SPECIFICATION PART STANDARD

PACKING WITH RETAINER
NAS1523
NONE SHEET 1 OF 4
USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OR CLAIM RESPECTING (1) THE SUITABILITY OF
ITEMS FOR ANY PARTICULAR APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO OF PATENT OR TRADEMARKS RIGHTS.
 NATIONAL AEROSPACE STANDARD
© COPYRIGHT 2014 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED

FINISH: ALLOY STEEL - CADMIUM PLATE PER AMS-QQ-P-416, TYPE II, CLASS 2 EXCEPT COLOR MAY INCLUDE
BLACK /13/.
CRES - PASSIVATE PER AMS2700, METHOD 1, CLASS 4
ALUMINUM ALLOY - ANODIC COAT, MIL-A-8625, TYPE II, CLASS 1, (UNDYED) OR CLASS 2 (DYED)
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC

CODE: A DASH OR LETTER AFTER THE BASIC NUMBER INDICATES THE MATERIAL OF THE RETAINER.
“-” = ALLOY STEEL, 4130
“C” = CRES
“AA” = ALUMINUM ALLOY
DASH NUMBER INDICATES THE SIZE OF THE PACKING AND RETAINER (SEE TABLE I).
THE LETTER AFTER THE DASH NUMBER INDICATES THE MATERIAL OF THE PACKING AND COLOR CODE
(SEE TABLE II, CODE DESIGNATION).
5
ARLINGTON, VA 22209

EXAMPLE OF PART NUMBER:

1000 WILSON BLVD.

NAS1523-10E = ALLOY STEEL RETAINER, FLUOROCARBON PACKING FOR 5/8 INCH SCREW
NAS1523C12N = CRES RETAINER, BUTYL RUBBER PACKING FOR 3/4 INCH SCREW
NAS1523AA3H = ALUMINUM ALLOY RETAINER, SILICONE PACKING FOR A #10 SCREW

5
TABLE I – DIMENSIONS
DASH SCREW ØA ØID C W D ØE INSTALLATION
NUMBER SIZE +.020 ±.010 MAX HOLE DIA
5
(REF) −.005 MAX (REF)
04 #4 .312 .100 .027 ±.004 .038 ±.003 .005 .176 .128
06 #6 .375 .130 .229 .154
.040 ±.004 .050 ±.003 .005
08 #8 .375 .156 .255 .180
3 #10 .438 .180 .317 .205
4 1/4 .500 .240 .445 .265
5 5/16 .593 .301 .508 .344
6 3/8 .656 .364 .571 .406
7 7/16 .750 .427 .050 ±.005 .072 ±.005 .008 .634 .468
8 1/2 .875 .490 .696 .531
PRODUCT AND SHALL BECOME EFFECTIVE NO LATER THAN SIX MONTHS FROM THE LAST
THIS DRAWING SUPERSEDES ALL ANTECEDENT STANDARD DRAWINGS FOR THE SAME

9 9/16 1.062 .552 .759 .594

10 5/8 1.188 .615 .818 .656
11 11/16 1.250 .674 .924 .718
12 3/4 1.312 .740 .982 .781
13 13/16 1.406 .798 1.048 .843
14 7/8 1.500 .864 1.105 .906
15 15/16 1.625 .921 1.172 .968
16 1 1.750 .988 1.234 1.032
17 1 1/16 1.812 1.050 1.290 1.093
.064 ±.005 .096 ±.005 .008
18 1 1/8 1.875 1.106 1.351 1.156
19 1 3/16 1.937 1.167 1.413 1.218
20 1 1/4 2.000 1.229 1.474 1.281
21 1 5/16 2.062 1.290 1.536 1.344
22 1 3/8 2.125 1.352 1.597 1.406
23 1 7/16 2.187 1.413 1.641 1.468
24 1 1/2 2.250 1.475 1.820 1.531
26 1 5/8 2.375 1.600 1.945 1.656
REVISION DATE.

28 1 3/4 2.500 1.725 .091 ±.005 .133 ±.005 .008 2.070 1.781
30 1 7/8 2.625 1.850 2.195 1.906
32 2 2.750 1.975 2.320 2.031

REVISION

5
FORM 09-01

NAS1523
SHEET 2
--`,````,,`,,,`,``,```,,``,`,,,,-`-`,,`,,`,`,,`---
USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OR CLAIM RESPECTING (1) THE SUITABILITY OF
ITEMS FOR ANY PARTICULAR APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THERETO OF PATENT OR TRADEMARKS RIGHTS.