Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    Modification Instructions For Audi A4 s4 b6 A4 s4 rs4 b7 Seat Exeo Instrument Cluster Display Sepdisp26

    Uploaded by

    Manuel TecnoAmps
    The document provides instructions for modifying an instrument cluster display to adjust the voltage reading. It involves replacing the display, measuring the voltage, and potentially modifying the EEPROM value by increasing or decreasing the location number. A calculation tool is provided to help determine the new EEPROM location value needed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Modification Instructions For Audi A4 s4 b6 A4 s4 rs4 b7 Seat Exeo Instrument Cluster Display Sepdisp26

    Uploaded by

    Manuel TecnoAmps
    13 views2 pages
    The document provides instructions for modifying an instrument cluster display to adjust the voltage reading. It involves replacing the display, measuring the voltage, and potentially modifying the EEPROM value by increasing or decreasing the location number. A calculation tool is provided to help determine the new EEPROM location value needed.

    Original Description:

    modification-instructions-for-audi-a4-s4-b6-a4-s4-rs4-b7-seat-exeo-instrument-cluster-display

    Original Title

    modification-instructions-for-audi-a4-s4-b6-a4-s4-rs4-b7-seat-exeo-instrument-cluster-display-sepdisp26

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for modifying an instrument cluster display to adjust the voltage reading. It involves replacing the display, measuring the voltage, and potentially modifying the EEPROM value by increasing or decreasing the location number. A calculation tool is provided to help determine the new EEPROM location value needed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views2 pages

    Modification Instructions For Audi A4 s4 b6 A4 s4 rs4 b7 Seat Exeo Instrument Cluster Display Sepdisp26

    Uploaded by

    Manuel TecnoAmps
    The document provides instructions for modifying an instrument cluster display to adjust the voltage reading. It involves replacing the display, measuring the voltage, and potentially modifying the EEPROM value by increasing or decreasing the location number. A calculation tool is provided to help determine the new EEPROM location value needed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    SEPDISP26

    Modification instructions

    Ver. 3.0

    www.minitools.com
    SEPDISP26: Modification for Audi A4 B6/B7 and Seat Exeo instrument cluster display

    WARNING: This process is recommended only to expert and qualified staff.

    NOTE:
    The following instructions are for SEPDISP26
    displays marked with D26A02XXXX serial
    numbers on the FPC (see picture beside).

    · Replace the display in an ambient temperature of 25 °C.


    · After replacing the LCD, switch on the cluster (pin no. 2 and pin no. 3 positive, pin no. 18 negative).
    · Identify the PCB of your dashboard (PCB1 or PCB2) and measure the voltage between the points A and B with a multimeter.

    PCB1 Pic.1
    PCB2 Pic.2

    B B
    A A

    Pic.3
    · If the voltage measured is between 7.0V and 7.2V, no modi-
    fication is necessary;
    · If the voltage detected is instead lower than 7.0V or higher
    than 7.2V, it is necessary to do the modification described
    in the following paragraph "EEPROM MODIFICATION".

    EEPROM MODIFICATION
    CALCULATION OF THE NEW VALUES OF THE LOCATIONS
    NOTE: For this modification, it is necessary to use an (The tool works correctly only on computers. For the mobile version, click here)
    EEPROM programmer.
    We recommend our SEP-EECLIP.
    · Type in the value of voltage measured between A and B points
    • First, set the programmer reading in hexadecimal (HEX).
    • De-solder the 24C08 EEPROM, highlighted in picture 3.
    · Type in the HEX value of the location 039B*
    • ATTENTION: Make a backup of the EEPROM,
    before the modification.
    · New value to type in the location 039B.
    • To reach a voltage between 7.0V and 7.2V, it is neces-
    sary to modify the value of 039B location;
    *How to identify 039B location value on the EEPROM
    Please note that increasing or decreasing these
    locations by 1 HEX unit, the variation will be +/- 0.09V.
    Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    If not familiar with hexadecimal calculation, it is possible to
    use the calculation tool in the box beside, simply typing in
    the values.
    SEPDISP26 | VER. 3.0

    NOTE: The tool works correctly only on computers. For the


    mobile version, click here.

    VERIFICATION
    Once these modifications have been done, measure again the voltage between A and B points and check that it actually is between 7.0V and 7.2V.
    page

    If not, increase or decrease the location until the value is as close as possible to the right range.
    2/2

    You might also like