PM135

PM135 DATASHEET

Multi-Functional Power Meter

The PM135 is a compact multi-function power-
meter, designed for metering three-phase AC
current circuits.

Featuring versatile I/O options, communication

ports and protocols it is suitable for integration in
utility substation or industrial SCADA systems.

HIGHLIGHTS MODULAR VERSATILITY

` Accuracy: Class 0.5/0.5S per ANSI / IEC 62053-22,
optional calibration as Class 0.2S
` Communication:
` Built-in port: standard RS-485
` Optional ports: ETH; 3G/4G cellular; Profibus
` Open protocol: Modbus RTU, DNP3.0,
IEC 60870-5-101/104
` Digital and Analog I/O Modules: up to 16 I/O
` Dual Mounting: suitable for 4-inch round and
92×92mm square cutouts
` Broad-range frequency measurement:
25-400 Hz
` LED Bar-graph: Displays load as percentage of
nominal current

Modbus
101/104
DNP3
OPEN
PROTOCOL

Specifications are subject to change without notice. Copyright © 2021-2022 SATEC Ltd. PM135 Datasheet June 2022
1
 PM135

FEATURES

MULTIFUNCTIONAL 3-PHASE POWER METER MODELS

` True RMS volts, amps, power, power factor,

neutral current, angles and unbalance for PM135P Basic model offering voltage,
voltage and current, frequency, symmetrical current, power and frequency
components and many more measurements
` Ampere/Volt demand meter
PM135E Offers all the features above, as
` 25, 50, 60 and 400 Hz measurements @ 3 decimal
well as energy measurements
digit values
and data logging (available in
` 128 samples per cycle
certain regions only).

PM135EH Offers all the features above, as

BILLING/TOU ENERGY METER (PM135E & PM135EH)
well as harmonic analysis
` Accuracy Class 0.5S (optional 0.2S) IEC 62053-22
All models offer identical communication
and IEC 61557-12 (0.2)
and control features.
` Four-quadrant active and reactive energy
polyphase static meter
` Three-phase total and per phase energy
measurements; active, reactive and apparent
PROGRAMMABLE LOGICAL CONTROLLER
energy counters
` Time-of-Use, 4 totalization and tariff energy/ ` Embedded programmable controller
demand registers x 8 tariffs, 4 seasons x 4 types ` 16 control setpoints; programmable thresholds
of days, 8 tariff changes per day, and delays
` Easy programmable tariff calendar schedule ` Relay output control
` Automatic daily energy and maximum demand ` 1-cycle response time
profile log for total energy and tariff registers

EVENT AND DATA RECORDING (PM135E & PM135EH)

HARMONIC ANALYZER (PM135EH)
` Non-volatile memory for timestamped event
` individual voltage & current harmonic spectrum and data recording: 48 days for 2 daily TOU
and harmonic angles up to 40 order harmonic
th
records, half-hourly writing of 4 parameters
` Voltage and current THD, TDD and K-Factor and recording over 100 events during the entire
period
` Event recorder for logging internal diagnostic
REAL-TIME WAVEFORM CAPTURE
events and setup changes
` Real-time “scope mode” waveform monitoring ` Two data recorders; programmable data logs on
via PAS software a periodic basis; automatic daily energy log and
maximum demand profile

2
 PM135

VOLTAGE INPUT OPTIONS COMMUNICATION

` Direct Measurement: 0-690V AC ` On-board interface

` Standard 2-wire RS-485
` Optional interfaces
CURRENT OPTIONS
` ETH (10/100Base T)
` 1A or 5A inputs from CT secondary ` 2G/3G cellular modem
` 40mA input designed for SATEC HACS CTs (100- ` Multipurpose RS-232/422/485
3000A options) ` PROFIBUS
` RS: unique input for 5A rated HACS CT ` RF (certain regions only)
` Client (Modbus/TCP over ETH or 3G/4G)
` TCP notification client for communicating
I/O OPTIONS
events or periodic reports to remote server
` 4DIOR: 4 digital inputs and 2 relay outputs with
` Expertpower client on subscription basis
1-cycle update time; unlatched, latched, pulse
` Communication protocols
and KYZ operation; energy pulses, selection of
` Modbus RTU
solid state or electromechanical relays
` SATEC ASCII
` 12DIOR: 12 digital inputs, 4 relay outputs (incl.
` DNP 3.0 (Level 2)
optional ETH port or additional RS485 port)
` IEC 60870-5-101 (optional)
` 4AO: four optically isolated analog outputs with
` IEC 60870-5-104 (optional)
an internal power supply; selection of 0-20mA,
4-20mA, 0-1mA, ±1mA, 0-3mA, ±3mA, 0-5mA
and ±5mA output; 1 cycle update time. DISPLAY
` 8DI: eight digital inputs with 1-ms scan time
` 3x2” / 76x49mm backlit LCD display

` Adjustable display brightness and update rate

` Auto-scroll option with adjustable page; auto-

return to a default page

` LED bar-graph displaying load as percentage of

nominal load current (user-definable)

3
 PM135

METER SECURITY REAL-TIME CLOCK

` Internal clock with 20-second retention time
` Password security for protecting meter setups
with battery backup
and accumulated data from unauthorized
changes
UNIQUE DESIGN

UPGRADEABLE FIRMWARE ` Pass through CT connection

` Built-in auxiliary terminal for loose CT wires.
` Device firmware is easily upgraded through the
` Dual panel mounting:
serial or Ethernet port
92×92mm square or 4” round cutout

SOFTWARE SUPPORT
` SATEC’s Power Analysis Software (PAS) for
comprehensive configuration and data
acquisition is available for download (free):
www.satec-global.com/power-analysis-software.
Always make sure to update .exe file with latest
version on webpage
` SATEC’s Expertpower web-based energy
management platform (subscription). Please visit
www.satec-global.com/Expertpower
` Any 3rd party software supporting open-protocol

APPLICATIONS

4
 PM135

TECHNICAL SPECIFICATIONS

INPUT RATINGS SAMPLING RATE MEASUREMENT

VOLTAGE INPUTS Sampling rate 128 samples/cycle

Installation Category III

Nominal voltage 57/100V AC POWER SUPPLY
(L-N/L-L) 230/400V AC 120/230V AC-DC Option » Rated input:
400/690V AC 88-290V DC, Burden 9VA,
Operating range Direct input and input via PT 85-265V AC 50/60/400 Hz
(L-N/L-L) 15- 480V AC / 15-828V AC Isolation: 1500V DC
» Input to ground: 2500V AC
Burden for 400V < 0.4 VA
12V DC Option » Rated input:
Burden for 120V < 0.04 VA
9.5-18V DC, Burden 4VA
Over-voltage withstand 1000V AC continuous, 2000V AC » Isolation: 1500V DC
for 1 second
24/48V DC Option » Rated input:
Input impedance 1 MΩ 18.5-58V DC, Burden 4VA
Wire size up to 12 AWG (up to 3.5mm²) » Isolation: 1500V DC
» Wire size:
up to 12 AWG (up to 3.5 mm²)
CURRENT INPUTS (VIA CT)
Wire size 12 AWG (up to 3.5 mm²) OPTIONAL MODULAR I/O
Galvanic isolation 3500V AC ELECTROMECHANICAL RELAY
Dry Contact: 1 contact (SPST Form A)

5A SECONDARY Rating 5A/250V AC

5A/30V DC
Operating range Continuous 10A RMS
Galvanic isolation » Between contacts and coil:
Burden < 0.2 VA @ In=5A (with 12AWG 3000V AC @ 1 min
wire and 1 m long) » Between open contacts:
Overload withstand 15A RMS continuous, 300A RMS 750V AC
for 1 second (with 12AWG section Operate time 10 ms max
wire)
Release time 5 ms max
Update time 1 cycle
1A SECONDARY
Wire size 14 AWG (up to 1.5 mm²)
Operating range Continuous 2A RMS
Burden < 0.02 VA @ In=1A (with 12AWG
wire and 1 m long) SOLID STATE RELAY
Dry contact, 1 contact (SPST Form A)
Overload withstand 3A RMS continuous, 80A RMS for
1 second (with 12AWG section Rating 0.15A/250V AC/DC
wire) Galvanic isolation 3750V AC @ 1 min
Operate time 1 ms max
HACS/RS5 REMOTE SENSORS Release time 0.25 ms max
Depends on sensor rating. See HACS datasheet Update time 1 cycle
Connector type Removable, 4 pins
Wire size 14 AWG (up to 1.5 mm²)

5
 PM135

DIGITAL INPUTS COM2 (OPTIONAL MODULE)

Dry Contacts, internally wetted @ 24V DC or Wet contact @ ETHERNET PORT
250V DC (12DI/4DO only) (as independent module OR add-on to 12DIOR module)
Sensitivity Open @ input resistance Transformer-isolated 10/100BaseT Ethernet port
>100 kΩ, Closed @ Input
resistance < 100 Ω Supported protocols Modbus/TCP (Port 502),
IEC 60870-5-104,
Galvanic isolation 3750V AC @ 1 min DNP3/TCP (Port 20000)
Internal power supply 24V DC, 4DI/2DO or 12DI/4DO Num. of simultaneous 4 (2 Modbus/TCP + 2 DNP3/TCP)
External power supply 250V DC (12DI/4DO only supply) connections
Scan time 1 ms Connector type RJ45 modular
Connector type Removable, 5 pins Isolation 1,500V DC @ 1min
Wire size 14 AWG (up to 1.5 mm²)
CELLULAR PORT
ANALOG OUTPUTS Supported protocols Modbus/TCP (Port 502),
DNP3/TCP (Port 20000)
Ranges » ±1 mA, max. load 5 kΩ
(upon order) (100% overload) Connector type SMA
» 0-20 mA, max. load 510 Ω
» 4-20 mA, max. load 510 Ω
» 0-1 mA, max. load 5 k Ω (100% PROFIBUS DP (IEC 61158)
overload) RS-485 optically isolated Profibus interface
Isolation 2500V AC @ 1 min Connector type Removable, 5 pins
Power supply Internal Baud rate 9600 bit/s – 12 Mbit/s (auto
Accuracy 0.5% FS detection)
Update time 1 cycle 32 bytes input, 32 bytes output
Connector type Removable, 5 pins Supported protocols PROFIBUS DP
Wire size 14 AWG (up to 1.5 mm²)
RS-232/422-485 PORT

COMMUNICATION PORTS RS-232 or RS-422/485 optically isolated port

Isolation 3000V AC @ 1 min
COM1
(built in) Baud rate Up to 115.2 kbps

RS-485 optically isolated port Supported protocols Modbus RTU, DNP3, SATEC ASCII,
IEC 60870-5-101
Isolation 3000V AC @ 1 min
Connector type Removable, 5 pins for RS-422/485
Baud rate up to 115.2 kbps and DB9 for RS-232
Supported protocols Modbus RTU, DNP3, SATEC ASCII, Wire size Up to 14 AWG (up to 1.5 mm²)
IEC 60870-5-101
Connector type Removable, 3 pins
Wire size Up to 14 AWG (up to 1.5 mm²)
REAL TIME CLOCK
» Battery-backed clock
» Accuracy—typical error:
7 seconds per month @ 25°C (±2.5ppm)
» Typical clock retention time: 36 months

6
 PM135

DISPLAY CONSTRUCTION
3x2” / 76x49mm backlit LCD display Weight 0.70kg (1.54 lb.)
3 color LED load bar graph (40-110%) Dimensions [H×W×D] 114×114×109mm (4.5×4.5×4.3")
Keypad 6 push buttons

MATERIALS
ENVIRONMENTAL CONDITIONS Case enclosure plastic PC/ABS blend
Operating temperature -30°C to 60°C (-22°F to 140°F) Front panel plastic PC
Storage temperature -40°C to 85°C (-40°F to 185°F) PCB FR4 (UL94-V0)
Humidity 0 to 95% non-condensing Terminals PBT (UL94-V0)
Connectors-Plug-in type Polyamide PA6.6 (UL94-V0)
Packaging case Carton and Stratocell®
(Polyethylene Foam) brackets
Labels Polyester film (UL94-V0)

STANDARDS COMPLIANCE

ACCURACY ` IEC 61000-4-6 level 3:

` Complies with IEC62053-22, class 0.2S Conducted Radio Frequency
` Meets ANSI C12.20 –1998, class 10 0.5% ` IEC 61000-4-8: Power Frequency Magnetic Field
` Complies with IEC 61557-12 (PMD): ` Meets ANSI/IEEE C37.90.1: Fast Transient SWC
` Total Apparent Power 0.2
` Total Active Energy 0.5/0.2
ELECTROMAGNETIC EMISSION
` Total Reactive Energy 0.5
` Complies with IEC 61000-6-4:
` Frequency 0.05
Radiated/Conducted class A
` Current 0.2
` Complies with IEC CISPR 22:
` Neutral Current 0.2
Radiated/Conducted class A
` Voltage 0.2
` Power Factor 0.2
` THDV, THDI 1 SAFETY/CONSTRUCTION
` UL File no. E236895
` Meets IEC 61010-1: 2006
ELECTROMAGNETIC IMMUNITY
Complies with IEC 61000-6-2:
` IEC 61000-4-2 level 3: Electrostatic Discharge AC AND IMPULSE INSULATION
` IEC 61000-4-3 level 3: Radiated Electromagnetic ` Complies with IEC 62052-11:
RF Fields 2500V AC during 1 minute
` IEC 61000-4-4 level 3: Electric Fast Transient ` 6KV/500Ω @ 1.2/50 μs impulse
` IEC 61000-4-5 level 3: Surge

7
 PM135

ORDER STRING
MODELS
Power Version PM135P
Energy Only PM135E
Energy and Harmonic Version PM135EH

OPTIONS
CURRENT INPUTS
5 Ampere 5
1 Ampere 1
5A split core remote high accuracy current RS5
sensor (HACS), 50/60Hz only
High Accuracy Current Sensors (HACS), HACS
50/60Hz only. Requires ordering of 3 HACS
CALIBRATION AT FREQUENCY
25 Hz* 25HZ
50 Hz 50HZ
60 Hz 60HZ
400 Hz* 400HZ
DISPLAY RESOLUTION
Low Resolution 1A, 1V -
High Resolution 0.01A, 0.1V H
POWER SUPPLY
85-265V AC and 85-290V DC ACDC
9.5-18V DC 1DC
18.5-58V DC (24V DC, 48V DC) 23DC
COMMUNICATION PROTOCOL
Modbus and DNP 3.0 -
Modbus and IEC 60870-5-101/104** 870
MOUNTING
Panel Mount (standard) -
DIN Rail Mounting DIN
TESTING AND CERTIFICATE
Full functional test, calibration at various work -
loads & detailed test report
All of the above plus ISO 17025 and ILAC CC
certified calibration certificate

NOTES
* Supported by 1A and 5A models only
** -104 requires ETH, does NOT work over cellular network

8
 PM135

EXPANSION MODULE *
ANALOG OUTPUTS
4 Analog Outputs: ±1mA AO1
4 Analog Outputs: 0-20mA AO2
4 Analog Outputs: 0-1mA AO3
4 Analog Outputs: 4-20mA AO4
4 Analog Outputs: 0-3mA AO5
4 Analog Outputs: ±3mA AO6
4 Analog Outputs: 0-5mA AO7
4 Analog Outputs: ±5mA AO8
ADDITIONAL COMMUNICATION PORTS
Communication: Ethernet (TCP/IP) ETH
Communication: PROFIBUS PRO
Communication: RS232/422/485 RS232
Communication: 2G/3G GSM Modem** T3G
Communication: 4G Modem ** T4x
x: G=Europe; V=Verizon (US); A=AT&T (US);
T=Telstra (AUS)
Communication: RF RF-x-y
DIGITAL INPUTS
4 Digital Inputs (Dry Contact) / DIOR
2 Relay Outputs 250V / 5A AC
4 Digital Inputs (Dry Contact) / DIOS
2 SSR Outputs 250V / 0.1A AC
8 Digital Inputs (Dry Contact) 8DI
12 Digital Inputs / 4 Relay Outputs 250V/5A AC 12DIOR 12DIOR-
Digital Inputs Rating - Dry Contact (DRC), DRC or 48V or
48V, 125V or 250V 125V or 250V
12 DIOR module communication port:
None -
RS-485 485
Ethernet ETH
CAN CAN

NOTES
* Max. 1 module per instrument. Can be ordered separately.
** Does not support 870 protocol. Supplied with bendable antenna.

Specifications are subject to change without notice. Copyright © 2021-2022 SATEC Ltd. PM135 Datasheet June 2022
9