E385B EL/LC BEH

net flywheel power 209 kW - 280 hp

operating weight (MAX) 37 770 kg 36 340 kg
3
bucket capacity 0.72 - 1.8 m 1.12 - 2.10 m3
 THE
TOP EFFICIENCY
Productivity (m3/l) + 15%
C.P.B.
(Continuous
Power Boost)
Continuous Power Boost is a feature
of excellence in the E385B.
Continuous Power Boost means that, if the
operator is facing a very tough application,
he can select this function (hydraulic pressure
raises to 37.8 Mpa) with no time limit.
Continuous Power Boost allows him to work
without problems in job-site productivity and
assure machine reliability. A unique feature
only offered by New Holland.

* A product of the global alliance between New Holland and KOBELCO

2
PERFORMANCE
SUPERIOR & SAFE DYNAMIC STABILITY
T he whole structure of the E385B has been redesigned and improved to guarantee a
perfect match between it’s high performance and by better positioning of it’s centre of
gravity, by optimising distribution of stress and by adopting higher quality steel plates.
To eliminate bumps and shocks to the whole structure when the pistons reach their stroke
end, cylinders have been equipped with automatic recovery and cushioning systems.
The long undercarriage of EL/BEH and LC versions, together with the weight strategically
distributed in its structure, contribute to enhance machine stability while avoiding
unpleasant jumping effects even in tough digging conditions.

NEW HINO common rail Enviromentally Friendly Engine

NEW stronger undercarriage & upperstructure
 NEW generation, higher flow hydraulic pumps
 NEW flow & pressure set up system
 NEW operator compartment
NEW heavy duty booms
 NEW hydraulic system

3
 THE PO

RESPECTING THE ENVIRONMENT

The E385B is compliant with European Directives concerning electromagnetic compatibility
and noise level.The emissions of the new Tier 3A HINO engine have been dramatically
reduced and are, as shown below, much lower than standard requirements.
CO: 0.50, HC: 0.08, NOx: 3.45, Particulate: 0.07 (*)
...a real Environmentally Friendly machine.
(*) all data are expressed in g/kWh

4
WER OF CONTROL

NEW COMMON RAIL ENGINE

T he new turbo, aftercooled, electronically controlled HINO engine, features a multiple injector, high
pressure, common rail technology for excellent fuel economy and sensible reduction of noise and pollution.
A large displacement, common rail engine guarantees:
 Lower fuel consumption  High torque for high productivity
 Longer lifespan  Higher reliability

NEW HYDRAULIC
PUMPS
T he E385B is equipped with two new generation
low noise hydraulic pumps able to supply a higher
flow: state-of-the-art pumps, which are easy to
control react promptly to all requirements and
are extremely quiet.

ELECTRONIC
CONTROL
S ensors are located in the pilot lines, sending
signals to the on-board computer that are proportional
to the manipulator's strokes.
These signals are managed together with engine
r.p.m. to tune the quantity of hydraulic oil requested
to guarantee extremely smooth and precise
controls, excellent stability and steady speed
during simultaneous operations.

LOW EFFORT &

PRECISE JOYSTICKS
A ll machine movements can be smoothly contolled by low effort
joysticks... a real, effective Control of Power allowing longer work times
with less fatigue. The joystick illustrated is supplied as an option, together
with rotating bucket circuit.

5
 ADVANC

NEW HYDRAULIC SYSTEM

EFFICIENCY AND CONTROLLABILITY
T o obtain a Hydraulic System which is much more efficient, controllable, fast and powerful, and
which consumes even less fuel, than previously, New Holland engineers have been working not only
on pumps but also on a completely redesigned and refined Control Valve adding a second arm spool
and new working mode selection functions. Movement speed has been increased and machine
controllability improved, especially on operations that require combined movements.
This outstanding characteristic is further enhanced by the new H.A.O.A. Control.

H.A.O.A. (Hydrotronic Active Operation Aid)

H ydrotronic Active Operation Aid is the most effective available combination of an extremely advanced
electronic techology that provides a “just in time” comprehensive control of all machine functions, and
a deeply refined and sophisticated hydraulic system. H.A.O.A. continuously optimises hydraulic output
according to operator and job demand, providing the best machine controllability, productivity, operator
comfort and fuel savings.

6
ED HYDRAULIC SYSTEM
A.E.P. - (Advanced
Electronic Processor)
A.E.P. is a new Electronic Processor that interacts with the
operator for selecting and monitoring all main working
parameters, maintenance notifications, self diagnosis and
operating data storage.
All this information is displayed in the new monitor, which
features a larger back-lit, easier to read digital display and
analogic gauges.
Simply select the requested working mode and A.E.P.
pre-sets the hydraulic system to accomplish the job in the
easiest and most productive way:
- S mode for normal working operations
- H mode when maximum power is required
Two additional modes are available for special applications
and to operate tools like breakers and crushers:
- A mode adjusts the attachment circuit for
tools which require two way flow.
A dedicated switch on the dashboard, enables the operator
to select oil flow through two pumps
- B mode for attachments featuring one way flow only
Both in A and B working modes the operator, by using the
buttons on the monitor, may adjust the flow by 10 l/min steps
and the pressure by 10 bars steps to perfectly match the
parameters of the attachment being used.
In addition, the operator can save to memory 9 combinations
of flow and pressure in both A and B working modes, for a
total of 18 combinations.

D.O.C. (Dipperstick Optimised Control)

T he newly redesigned Control Valve features a second spool dedicated to dipperstick operation.
The movement “dipper out” is now achieved with a double flow, i.e., using the flow of the two pumps.
The “dipper in” movement is even faster because of the double pump flow combined with the “Conflux”,
or recirculation of unused oil which is diverted from return to tank.
A perfect combination of speed, efficiency, precision and increased production.

OBJECT HANDLING KIT

E uropean Standards rules are not open to interpretation by European Country. In case of object
handling operations, an excavator can be used only if certified by manufacturer
that it is equipped with all safety devices required by European Standards EN 474-5: 1996.
New Holland, confirming its commitment to grant high performance in an extremely safe environment,
offers its customers the optional Object Handling Kit for maximum operator confidence.

7
 HIGH RE
Top design & produ

B ooms and Arms have been redesigned using

advanced CAD (Computer Aided Design) and FEM
(Finite Elements Methodology) Systems to get higher
strength only in those areas where stress is
concentrated.
These sophisticated design methodologies are
combined with the most advanced production
technologies, providing high tensile steel plates that
are cut, assembled and welded at the New Holland
plant, which since many years holds the prestigious
"Vision 2000" Quality Certification for many years.
The same innovative guidelines, to achieve Heavy
Duty maximum strength together with outstanding
stress resistance, are applied in design and
manufacture of the upper structure and the
undercarriage.

NEW BOOM & ARM

T o further extend the Arm’s durability, even in rocky applications, New Holland offers as
standard a robust Arm protection.

8
LIABILITY & DURABILITY
ction technologies

LONG & STRONG UNDERCARRIAGE

FOR ALL VERSIONS
T he length of 4050 mm of all versions (EL, BEH and LC) grants machine durability, reliability, stability and
performance, together with high flotation in swamps areas and greater operator comfort.

TRACK GUIDE
A centrally mounted track guide is supplied as standard equipment on both track frames.
If the machine has to work and move over very uneven and rocky terrain, customers may choose the optional
4 additional track guides which are mounted, two per track frame, front and rear of the central guides.
They keep the chains on the rollers and provide protection while at the same time giving extended
durability, maximum efficiency and safety.

BUCKET LINKAGE
WITH DOUBLE BUSHING
T he arm/bucket long-life internal bushing now has extra
protection from wear due to contact with the bucket linkage,
thanks to new additional external bushings made from anti-
wear steel material. When the radial surface is worn this
new bushing can be easily changed, thus increasing pin
and bushing durability while reducing ownership costs.

9
 OPERATO

NEW
ONE-HAND
WINDSCREEN
OPENING
One-touch lock release
simplifies opening and
closing the front window,
while a new mechanism
makes it lighter.

INSTRUMENT NEW A. E. P. MONITOR

LAYOUT The newly designed A.E.P. Monitor,
In-cab switches and features analogical gauges which provide
controls have been moved one sight advice, regardless of the
to the right-hand side in operating environment.
an easy to reach and more The digital Display Screen has been
ergonomic position, thus enlarged to further enhance visibility.
improving operator Maintenance information is clearly
comfort and convenience. displayed and the self-diagnostic function
provides an early warning detection
of malfunctions.
Details of any previous breakdown or
malfunction are also stored.

10
R SAFETY AND COMFORT
New EVO cab
evolution
in comfort
and safety
T he interior of the cab has been completely redesigned
to maximise operator comfort and to enable
optimum operator performance. All switches and
controls are now ergonomically positioned on the right
side, easy to find and to reach. Enlarged side windows
enhance the panoramic view. The radio and the new,
more powerful and effective automatic air-conditioning
system are standard equipment, creating an agreeable
working atmosphere regardless of external weather
conditions.
At the same time, new interior design and materials
create an elegant feeling. Six silicon liquid filled viscous
dumpers minimise vibrations. The new, reinforced
structure of the cab complies to ROPS and FOPS
standards. Together with the optional front guard it's
effectively contributing to operator safety.

NEW COMFORTABLE SEAT

New comfortable contoured seat which can be adjusted in all
directions, and back and forth, together with or independently
of side consoles.
The armrests, integrated on side consoles, can be lifted/lowered
into four different positions and inclined, enabling the operator
to set the correct position for maximum convenience and comfort.

UNIQUE REAR CAMERA WITH

“DEDICATED” IN CAB SCREEN
T his is a very special option, enhancing active safety for both the operator and others on the job site.
The “dedicated screen” is mounted inside the cab and is unique to New Holland. It allows the operator, whilst working, to
simultaneously control both the job going on behind his machine and the machine’s functional parameters, thanks to the A.E.P.
display, which operates constantly. A really unique and outstanding feature in terms of safety and comfort.

11
 EASY MAIN
DESIGNED TO EFFECTIVELY CUT
OPERATING COSTS
CLEAN AND ACCESSIBLE LAYOUT
T he new machine layout has been designed to make inspections, maintenance and servicing much
easier and less time-consuming.
The engine oil filter, the fuel filter and the water separator are remote mounted and easy to reach from ground
level. Both the fuel filter and the water separator, which removes contaminants and water, have an important
function for engine performance and durability.
Cooling components (radiator, hydraulic oil cooler and intercooler) are now mounted in parallel, which means
increased cooling efficiency for higher component reliabilty whilst being easier to check and clean.

T he simplified layout of all vital components of the New Holland E385B under both the right and the left
side panels makes maintenance much easier, less time consuming and less costly, and provides much better
access for servicing. There is plenty of room in all compartments and most components are positioned in
such a way to enable easy access from ground level. An elegant and modern design added to state-of-
the-art technology.

CENTRALISED GREASING
M aintenance procedures are also improved thanks to new
grouped and centralised greasing points, which allow all boom
wear points to be easily greased from ground level, after every
500 hours-long lasting intervals! On request, the E385B can be
equipped with an “Automatic Centralised Greasing System”
to supply all wear points of the machine with the right quantity
of grease at the right time. A winning tool to simultaneously
reduce maintenance procedures and costs while improving
machine reliability and durability.

12
TENANCE & SERVICEABILITY
INSIDE CAB MAINTENANCE
 Airconditioning filter, positioned under the seat, can be easily removed
without tools and from ground level, for easy cleaning.

 Detachable two-piece
floormat with handles
for easy removal.
A floor drain is located
under the mat to facilitate
inside cab cleaning.

T FUSES
he fuses are inside the cab,
protected from dust and water
as well as being easy to reach
and control.

TOOL BOX
T he tool box has been completely
redesigned with a side-opening panel.
It stores a new electric immersion type
fuel pump, with automatic stop and
alarm when the tank is full. The
repositioning of the batteries (under
the cooling components) and of the
fuses (inside the cab) makes room in
the compartment behind the cab for
an additional wide and useful tool box.

13
 SPECIFICATIONS
Maximum operating pressure:
ENGINE TIER 3A Equipment / travel ................................................................34.3 MPa
Swing...................................................................................29.0 MPa
Power Boost ........................................................................37.8 MPa
Net flywheel power (ISO 14396 / ECE R120).............209 kW / 280 hp Hydraulic cylinders ..........................................................double effect
Rated ...................................................................................2100 rpm - Lift (2) - bore x stroke ...............................................140 x 1550 mm
Make and model ...................................................HINO EB-JO8E-TM - Penetration (1) - bore x stroke ..................................170 x 1788 mm
Type.....Diesel, common rail, direct injection, turbocharged, intercooler - Bucket (1) E385 - bore x stroke ................................145 x 1250 mm
Total Displacement........................................................................7.7 l - Bucket (1) E385BEH - bore x stroke .........................150 x 1250 mm
Number of cylinders ..........................................................................6 - Positioning (only triple articulation)
Bore x stroke ................................................................112 x 130 mm bore x stroke ............................................................170 x 1335 mm
Maximum torque at 1600 rpm.................................................998 Nm
Remote engine oil filter for easy replacement
Engine rpm electronic control with knob selector
TRANSMISSION
Automatic Idling return selector with Auto-Idling controls in neutral
Type .................................................................two-speed hydrostatic
Start at -25° outside temperature as standard equipment.
Motors .....................................axial piston double displacement type,
The engine complies with 97/68/EC standards TIER 3A collapsible into track carriage
Brakes.................................................................automatic discs type
Final drive ................................................................oil bath epicyclical
ELECTRICAL SYSTEM Maximum slope .................................................70% (35°) continuous
Travel speeds:
Operating voltage .........................................................................24 V slow ...................................................................0 to 3.4 km/h
Alternator ................................................................................60 Amp high ....................................................................0 to 5.8 km/h
Starter motor...............................................................................5 kW Drawbar pull............................................................................ 322 kN
Standard maintenance-free batteries .................................................2 ‘Automatic DownShift” device: with selector on “fast” in case of need
for more traction force, adjusts travel motors to maximum displacement.
Capacity...................................................................................160 Ah

HYDRAULIC SYSTEM SWING

Swing motor...............................................................axial piston type
Higher capacity pumps, to supply higher flow at lower rpm; Swing brake........................................................automatic, disc type
Redesigned Main Control Valve, with added 2nd dipper spool and Final drive ................................................................oil bath epicyclical
new Fail Safe Functions; Slew ring ...................................................................grease bath type
Bigger radius piping with SAE flange ports; Swing speed .........................................................................10.0 rpm
H.A.O.A. (Hydrotronic Active Operation Aid) to get the best hydraulic
output according to operator/ application demand;
E.S.S.C. (Engine Speed Sensing Control) device, for total installed
CAB AND CONTROLS
hydraulic power exploitation;
Sound suppressed cab with modern design, integrated ROPS and
D.O.C. (Dipper Optimised Control) thanks to the 2nd dedicated standard FOPS, tinted safety glass, insertable front window, transparent
spool in the Control Valve and to the Conflux system; upper canopy. Standard automatic air conditioning and radio.
C.P.B. (Continuous Power Boost) to allow the operator to use extra Controls ....................................................................................piloted
power when and how long it is needed; Two cross travel levers control all tool movements and superstructure
A.E.P. (Advanced Electronic Processor) interacting with the operator swing.
for selecting and monitoring main working parameters, maintenance Two non-removable lever pedals control all track movements, counter-
programmes, self diagnosis and operating data storage thanks to the rotation included.
new monitor with a larger digital display and analogical gauges; A safety lever neutralises the piloting circuit completely.

Two working modes:

- S = for normal digging operation;
UNDERCARRIAGE
- H = when maximum power is required; X-design undercarriage
Sealed bushing reinforced track HD chain
Two Attachments modes: E385BEL/BEH E385BLC
- A = for attachments which require double pump flow; Track rollers (each side) 9 9
- B = for attachments, such as breaker, featuring one way flow only. Carrier rollers (each side) 2 2
Length of track on ground (mm) 4050 4050
Standard double pump flow device and Diverter Valve Gauge (mm) 2390 2590
automatically actuated while selecting A; Shoes available (mm) 600-700 600-700
Super Fine hydraulic filter (8 micron) to grant perfect oil filtration, 800 800-900
contributing to increase oil change interval
Main pumps: CAPACITIES
two variable delivery pumps with electronic delivery adjustment.
With controls on neutral, the pumps automatically move to displacement litres
position “0”. Lube oil ........................................................................................28.5
Maximum delivery ...........................................................2 x 294 l/min Coolant ........................................................................................31.0
Piloting circuit gear type pump Fuel tank ....................................................................................580.0
Maximum delivery ...................................................................20 l/min Hydraulic system ........................................................................353.0

14
 ONE PIECE BOOM TRIPLE ARTICULATION
BUCKETS E385B EL E385B LC E385B - BEH E385B EL E385B LC
Dipper mm Dipper mm Dipper mm Dipper mm Dipper mm
Capacity
Width (m3) Weight
(mm) ISO 7451 (Kg) 2330 2600 3300 4150 2330 2600 3300 4150 2150 2330 2600 3300 4150 2330 2600 3300 4150

850 0,73
0.73 890
1000 0,91
0.91 945
1200 1,25
1.25 1070
1350 1,45
1.45 1145
1500 1,60
1.60 1250
1700 1,85
1.85 1375
1830 2,20
2.20 1390

General digging work (specific weight of material < 1.8 t/m3)

Slightly heavy digging work (specific weight of material < 1,5 t/m3)
Loading work (specific weight of material < 1,2 t/m3)
15
 ONE - PIECE BOOM
DIMENSIONS (mm) - OPERATING WEIGHT
E
G D

F
H

I C

M L A
N B

VERSIONS A B C D E F G H I L
(1) 11370 (1) 3655
E385BEL 4050 4960 1185 3500 (2) 11270 (2) 3615 2950 3250 1050 530
(3) 11175 (3) 3350
(4) 11215 (4) 3485
(1) 11370 (1) 3655
E385BLC 4050 4960 1185 3500 (2) 11270 (2) 3615 2950 3250 1050 530
(3) 11175 (3) 3350
(4) 11215 (4) 3485
Dipperstick: (1) 2330 mm - (2) 2600 mm - (3) 3300 mm - (4) 4150 mm

E385BEL E385BLC
M - Shoe width mm 600 700 800 600 700 800 900
N - Maximum width mm 2990 3090 3190 3190 3290 3390 3490
Operating weight * kg 35655 36115 36605 35740 36200 36690 37180
Specific ground pressure bar 0,72
0.72 0,62
0.62 0,55
0.55 0,72
0.72 0,62
0.62 0,55
0.55 0,51
0.51
3
* With 3300 mm dipperstick and 1.6 m bucket E

12 11 10 9 8 7 6 5 4 3 2 1 0

DIGGING PERFORMANCE 11

ONE - PIECE BOOM = 6500 mm 10

8
DIPPERSTICK 2330 2600 3300 4150
A mm 10300 10600 11200 11930 7

6
A’ mm 10090 10390 11000 11740
5 C
B mm 6510 6780 7480 8330
4
B’ mm 6300 6600 7320 8190 D
3
C mm 10100 10360 10550 10740
2
D mm 6970 7200 7390 7600
1
E mm 4410 4500 4370 4430 0

BREAKOUT FORCE: 3 B
B'
Bucket daN 22000 22000 22000 22000 4

Dipperstick daN 22500 20200 16000 13500 5

7
WITH
8
“POWER BOOST” ON:
2440mm
Bucket daN 24000 24000 24000 24000
Dipperstick daN 25000 22400 17700 15000 A'
A

16
Triple articulaTIon
DIMENSIONS (mm) - OPERATING WEIGHT
E
G D

H F

I C

M L A
N B

VERSION A B C D E F G H I L
(1) 11315 (1) 3375
E385BEL 4050 4960 1185 3500 (2) 11205 (2) 3390 2950 3250 1050 530
(3) 11170 (3) 3345
(4) 11190 (4) 3630
(1) 11315 (1) 3375
E385BLC 4050 4960 1185 3500 (2) 11205 (2) 3390 2950 3250 1050 530
(3) 11170 (3) 3345
(4) 11190 (4) 3630
Dipperstick: (1) 2330 mm - (2) 2600 mm - (3) 3300 mm - (4) 4150 mm

E385BEL E385BLC
M - Shoe width mm 600 700 800 600 700 800 900
N - Maximum width mm 2990 3090 3190 3190 3290 3390 3490
Operating weight kg 36245 36705 37195 36330 36790 37280 37770
Specific ground pressure bar 0,73
0.73 0,64
0.64 0,56
0.56 0,73
0.73 0,64
0.64 0,57
0.57 0,51
0.51
3 E
* With 3300 mm dipperstick and 1.6 m bucket
12 11 10 9 8 7 6 5 4 3 2 1 0

DIGGING PERFORMANCE 13
12
TRIPLE ATICULATION
MAX. EXTENSION = 6450 mm 11
MIN. EXTENSION = 4700 mm 10

DIPPERSTICK mm 2330 2600 3300 4150 8

A mm 10376 10670 11305 12077 7

6 C
A’ mm 10153 10455 11100 11887
5
B mm 5980 6270 6937 7750 D
4
B’ mm 5873 6165 6842 7665
3
C mm 12022 12315 12820 13422 2
D mm 8738 9047 9555 10142 1
E mm 3050 3007 2784 2980 0

BREAKOUT FORCE: 2

3 B'
Bucket daN 22000 22000 22000 22000 B
4
Dipperstick daN 22500 20200 16000 13500
5

6
WITH
7
“POWER BOOST” ON:
8
Bucket daN 24000 24000 24000 24000 12 11 10 9 8 7 6 5 4 3 2 1 0
2440mm
Dipperstick daN 25000 22400 17700 15000
A'
A

17
 BEH
DIMENSIONS (mm) - OPERATING WEIGHT
E
G D

F
H

I C

M L A
N B

VERSION A B C D E* F* G H I L
E385B-BEH 4050 4960 1185 3500 10655 3800 2950 3250 1050 530

E385B - BEH
M - Shoe width mm 600 700 800
N - Maximum width mm 2990 3090 3190
Operating weight kg 35390 35850 36340
Specific ground pressure bar 0,71
0.71 0,62
0.62 0,55
0.55
3
* With 2150 mm dipperstick and 1.6 m bucket

10 9 8 7 6 5 4 3 2 1 0

10

DIGGING PERFORMANCE 9 E
ONE - PIECE BOOM = 5775 mm
8

DIPPERSTICK mm 2150 7

A mm 9470 6
A’ mm 9230 5 C
B mm 5660
4
B’ mm 5460
3 D
C mm 9730
D mm 6550 2

E mm 3400 1

BREAKOUT FORCE: 2
Bucket daN 22000 B'
3 B
Dipperstick daN 23500
4

5
WITH
“POWER BOOST” ON: 6
2440mm
Bucket daN 24000
Dipperstick daN 25000 A'
A

18
 LIFTING CAPACITY
2330 mm DIPPERSTICK VALUES ARE EXPRESSED IN TONNES
RADIUS OF LOAD
3,0 m
3.0 4,5 m
4.5 6,0 m
6.0 7,5
7.5 m AT MAX. REACH

REACH
FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE m

E385BEL TRIPLE ARTICULATION

HEIGHT
+6,0 m
+6.0 11.2 *
11,2 11.2 *
11,2 8.4 *
8,4 8.4 *
8,4 6.6 *
6,6 6.6 *
6,6 6.0 *
6,0 5,6
5.6 8,27
8.27
+4,5 m
+4.5 14,2 *
14.2 14,2 *
14.2 9,3 *
9.3 9,3 *
9.3 6,9 *
6.9 6,5
6.5 5,7 *
5.7 4.9
4,9 8.83
8,83
+3,0 m
+3.0 16,0 *
16.0 13,1
13.1 10,8 *
10.8 8,6
8.6 7,4 *
7.4 6,1
6.1 5,6 *
5.6 4,5
4.5 9,10
9.10
+1,5 m
+1.5 16,0 *
16.0 12,2
12.2 11,8 *
11.8 8,1
8.1 8,0 *
8.0 5,9
5.9 5,7 *
5.7 4,3
4.3 9,12
9.12
0m 14,5 *
14.5 11,8
11.8 11,2 *
11.2 7,8
7.8 8,4 *
8.4 5,7
5.7 6,0 *
6.0 4,5
4.5 8,87
8.87
-1,5 m
-1.5 12,0 *
12.0 11,9
11.9 9,7 *
9.7 7,7
7.7 7,4 *
7.4 5,6
5.6 5,9 *
5.9 4,9
4.9 8,38
8.38
-3,0 m
-3.0 7,1 *
7.1 7,1 *
7.1 5,2 *
5.2 5,2 *
5.2 7,41
7.41
-4,5 m
-4.5

E385BLC TRIPLE ARTICULATION

HEIGHT
+6,0 m
+6.0 11.2 *
11,2 11.2 *
11,2 8.4 *
8,4 8.4 *
8,4 6.6 *
6,6 6.6 *
6,6 6.0 *
6,0 6.0 *
6,0 8.27
8,27
+4,5 m
+4.5 14,2 *
14.2 14,2 *
14.2 9,3 *
9.3 9,3 *
9.3 6,9 *
6.9 6,9 *
6.9 5,7 *
5.7 5,4
5.4 8,83
8.83
+3,0 m
+3.0 16,0 *
16.0 14,8
14.8 10,8 *
10.8 9,6
9.6 7,4 *
7.4 6,9
6.9 5,6 *
5.6 5,0
5.0 9,10
9.10
+1,5 m
+1.5 16,0 *
16.0 13,8
13.8 11,8 *
11.8 9,1
9.1 8,0 *
8.0 6,6
6.6 5,7 *
5.7 4,9
4.9 9,12
9.12
0m 14,5 *
14.5 13,5
13.5 11,2 *
11.2 8,8
8.8 8,4 *
8.4 6,4
6.4 6,0 *
6.0 5,0
5.0 8,89
8.89
-1,5 m
-1.5 12,0 *
12.0 12,0
12.0 9,7 *
9.7 8,7
8.7 7,4 *
7.4 6,4
6.4 5,9 *
5.9 5,5
5.5 8,38
8.38
-3,0 m
-3.0 7,1 *
7.1 7,1 *
7.1 5,2 *
5.2 5,2 *
5.2 7,41
7.41
-4,5 m
-4.5

E385BEL ONE-PIECE BOOM

HEIGHT
+6,0 m
+6.0 7,7 *
7.7 7,7 *
7.7 7,1 *
7.1 6,8
6.8 6,9 *
6.9 5,9
5.9 8.08
8,08
+4,5 m
+4.5 11.0 *
11,0 11.0 *
11,0 8.8 *
8,8 8.8 *
8,8 7.6 *
7,6 6.5
6,5 7.0 *
7,0 5.1
5,1 8,64
8.64
+3,0 m
+3.0 13,4 *
13.4 13,0
13.0 10,0 *
10.0 8,7
8.7 8,2 *
8.2 6,3
6.3 7,2 *
7.2 4,7
4.7 8,92
8.92
+1,5 m
+1.5 15,1 *
15.1 11,9
11.9 11,0
11.0 8,2
8.2 8,8 *
8.8 6,0
6.0 7,4 *
7.4 4,6
4.6 8,94
8.94
0m 15,7 *
15.7 11,6
11.6 11,6 *
11.6 7,9
7.9 9,2 *
9.2 5,8
5.8 7,7 *
7.7 4,7
4.7 8,71
8.71
-1,5 m
-1.5 19.5*
19,5* 19.5 *
19,5 15,3 *
15.3 11,7
11.7 11,6 *
11.6 7,9
7.9 9,1 *
9.1 5,8
5.8 8,1 *
8.1 5,1
5.1 8,19
8.19
-3,0 m
-3.0 18,6*
18.6* 18,6 *
18.6 14,1 *
14.1 12,2
12.2 10,8 *
10.8 8,0
8.0 8,4 *
8.4 6,0
6.0 7,33
7.33
-4,5 m
-4.5 11,5 *
11.5 11,5 *
11.5 8,5 *
8.5 8,3
8.3 5,98
5.98

E385BLC ONE-PIECE BOOM

HEIGHT
+6,0 m
+6.0 7,7 *
7.7 7,7 *
7.7 7,1 *
7.1 7,1 *
7.1 6,9 *
6.9 6,6
6.6 8,08
8.08
+4,5 m
+4.5 11.0 *
11,0 11.0 *
11,0 8.8 *
8,8 8.8 *
8,8 7.6 *
7,6 7.3
7,3 7.0 *
7,0 5.7
5,7 8.64
8,64
+3,0 m
+3.0 13,4 *
13.4 13,4 *
13.4 10,0 *
10.0 9,7
9.7 8,2 *
8.2 7,0
7.0 7,2 *
7.2 5,3
5.3 8,92
8.92
+1,5 m
+1.5 15,1 *
15.1 13,4
13.4 11,0 *
11.0 9,2
9.2 8,8 *
8.8 6,7
6.7 7,4 *
7.4 5,1
5.1 8,94
8.94
0m 15,7 *
15.7 13,1
13.1 11,6 *
11.6 8,9
8.9 9,2 *
9.2 6,5
6.5 7,7 *
7.7 5,3
5.3 8,71
8.71
-1,5 m
-1.5 19.5*
19,5* 19.5 *
19,5 15,3 *
15.3 13,3
13.3 11,6 *
11.6 8,8
8.8 9,1 *
9.1 6,5
6.5 8,1 *
8.1 5,7
5.7 8,19
8.19
-3,0 m
-3.0 18,6*
18.6* 18,6 *
18.6 14,1 *
14.1 13,8
13.8 10,8 *
10.8 9,0
9.0 8,4 *
8.4 6,8
6.8 7,33
7.33
-4,5 m
-4.5 11,5 *
11.5 11,5 *
11.5 8,5 *
8.5 8,5 *
8.5 5,98
5.98

As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static
tipping load. Values marked with an asterisk are limited by the hydraulic system.

19
 LIFTING CAPACITY
2600 mm DIPPERSTICK VALUES ARE EXPRESSED IN TONNES
RADIUS OF LOAD
3,0 m
3.0 4,5 m
4.5 6,0 m
6.0 7,5
7.5 m AT MAX. REACH

REACH
FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE m

E385BEL TRIPLE ARTICULATION

HEIGHT
+6,0 m
+6.0
+4,5 m
+4.5 10.6 *
10,6 10.6 *
10,6 8.1 *
8,1 8.1 *
8,1 6.4 *
6,4 6.4 *
6,4 5.5 *
5,5 5,1
5.1 8,63
8.63
+3,0 m
+3.0 13,2 *
13.2 13,2 *
13.2 9,0 *
9.0 9,0 *
9.0 6,6 *
6.6 6,5
6.5 5,2 *
5.2 4.5
4,5 9.16
9,16
+1,5 m
+1.5 15,7 *
15.7 13,3
13.3 10,4 *
10.4 8,7
8.7 7,2 *
7.2 6,1
6.1 5,1 *
5.1 4,2
4.2 9,43
9.43
0m 16,1 *
16.1 12,2
12.2 11,7 *
11.7 8,1
8.1 7,7 *
7.7 5,8
5.8 5,2 *
5.2 4,1
4.1 9,45
9.45
-1,5 m
-1.5 14,9 *
14.9 11,8
11.8 11,3 *
11.3 7,8
7.8 8,2 *
8.2 5,6
5.6 5,5 *
5.5 4,1
4.1 9,22
9.22
-3,0 m
-3.0 12,6 *
12.6 11,8
11.8 9,9 *
9.9 7,6
7.6 7,6 *
7.6 5,6
5.6 5,6 *
5.6 4,5
4.5 8,74
8.74
-4,5 m
-4.5 9,3 *
9.3 9,3 *
9.3 7,6 *
7.6 7,6 *
7.6 5,4 *
5.4 5,4 *
5.4 4,5 *
4.5 4,5 *
4.5 7,94
7.94

E385BLC TRIPLE ARTICULATION

HEIGHT
+6.0
+6,0 m
+4.5
+4,5 m 10.6 *
10,6 10.6 *
10,6 8.1 *
8,1 8.1 *
8,1 6.4 *
6,4 6.4 *
6,4 5.5 *
5,5 5.5 *
5,5 8.63
8,63
+3.0
+3,0 m 13,2 *
13.2 13,2 *
13.2 9,0 *
9.0 9,0 *
9.0 6,7 *
6.7 6,7 *
6.7 5,2 *
5.2 5,1
5.1 9,16
9.16
+1.5
+1,5 m 15,7 *
15.7 14,9
14.9 10,4 *
10.4 9,7
9.7 7,2 *
7.2 6,9
6.9 5,1 *
5.1 4,7
4.7 9,43
9.43
0m 16,1 *
16.1 13,9
13.9 11,7 *
11.7 9,1
9.1 7,7 *
7.7 6,6
6.6 5,2 *
5.2 4,6
4.6 9,45
9.45
-1.5
-1,5 m 14,9 *
14.9 13,4
13.4 11,3 *
11.3 8,8
8.8 8,2 *
8.2 6,4
6.4 5,5 *
5.5 4,7
4.7 9,22
9.22
-3.0
-3,0 m 12,6 *
12.6 12,6 *
12.6 9,9 *
9.9 8,6
8.6 7,6 *
7.6 6,3
6.3 5,6 *
5.6 5,1
5.1 8,74
8.74
-4.5
-4,5 m 9,3 *
9.3 9,3 *
9.3 7,6 *
7.6 7,6 *
7.6 5,4 *
5.4 5,4 *
5.4 4,5 *
4.5 4,5 *
4.5 7,94
7.94

E385BEL ONE-PIECE BOOM

HEIGHT
+6.0
+6,0 m 6,7 *
6.7 6,7 *
6.7 6,5 *
6.5 5,4
5.4 8,40
8.40
+4.5
+4,5 m 10.4 *
10,4 10.4 *
10,4 8.3 *
8,3 8.3 *
8,3 7.2 *
7,2 6.5
6,5 6.6 *
6,6 4.7
4,7 9.00
9,00
+3.0
+3,0 m 12,9 *
12.9 12,9 *
12.9 9,6 *
9.6 8,7
8.7 7,9 *
7.9 6,2
6.2 6,7 *
6.7 4,4
4.4 9,20
9.20
+1.5
+1,5 m 14,7 *
14.7 12,0
12.0 10,8 *
10.8 8,2
8.2 8,6 *
8.6 5,9
5.9 7,0 *
7.0 4,2
4.2 9,20
9.20
0m 15,6 *
15.6 11,5
11.5 11,5 *
11.5 7,8
7.8 9,0 *
9.0 5,7
5.7 7,3 *
7.3 4,3
4.3 9,00
9.00
-1.5
-1,5 m 18.0*
18,0* 18.0*
18,0* 15,5 *
15.5 11,7
11.7 11,6 *
11.6 7,8
7.8 9,0 *
9.0 5,7
5.7 7,6 *
7.6 4,7
4.7 8,50
8.50
-3.0
-3,0 m 19,6*
19.6* 19,6*
19.6* 14,5 *
14.5 12,0
12.0 11,0 *
11.0 8,0
8.0 8,3 *
8.3 5,7
5.7 7,9 *
7.9 5,5
5.5 7,70
7.70
-4.5
-4,5 m 16,2*
16.2* 16,2*
16.2* 12,1 *
12.1 12,1 *
12.1 9,0 *
9.0 8,1
8.1 8,0 *
8.0 7,2
7.2 6,50
6.50

E385BLC ONE-PIECE BOOM

HEIGHT
+6.0
+6,0 m 6,7 *
6.7 6,7 *
6.7 6,5 *
6.5 6,0
6.0 8,40
8.40
+4.5
+4,5 m 10.4 *
10,4 10.4 *
10,4 8.3 *
8,3 8.3 *
8,3 7.2 *
7,2 7.2
7,2 6.6 *
6,6 5.3
5,3 9.00
9,00
+3.0
+3,0 m 12,9 *
12.9 12,9 *
12.9 9,6 *
9.6 9,6 *
9.6 7,9 *
7.9 6,9
6.9 6,7 *
6.7 4,9
4.9 9,20
9.20
+1.5
+1,5 m 14,7 *
14.7 13,5
13.5 10,8 *
10.8 9,1
9.1 8,6 *
8.6 6,6
6.6 7,0 *
7.0 4,7
4.7 9,20
9.20
0m 15,6 *
15.6 13,0
13.0 11,5 *
11.5 8,8
8.8 9,0 *
9.0 6,4
6.4 7,3 *
7.3 4,9
4.9 9,00
9.00
-1.5
-1,5 m 18.0*
18,0* 18.0 *
18,0 15,5 *
15.5 13,2
13.2 11,6 *
11.6 8,8
8.8 9,0 *
9.0 6,4
6.4 7,6 *
7.6 5,3
5.3 8,50
8.50
-3.0
-3,0 m 19,6*
19.6* 19,6 *
19.6 14,5 *
14.5 13,8
13.8 11,0 *
11.0 8,9
8.9 8,3 *
8.3 6,4
6.4 7,9 *
7.9 6,1
6.1 7,70
7.70
-4.5
-4,5 m 16,2*
16.2* 16,2 *
16.2 12,1 *
12.1 12,1 *
12.1 9,0 *
9.0 8,9 *
8.9 8,0 *
8.0 8,0
8.0 6,50
6.50

As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static
tipping load. Values marked with an asterisk are limited by the hydraulic system.

20
 LIFTING CAPACITY
3300 mm DIPPERSTICK VALUES ARE EXPRESSED IN TONNES
RADIUS OF LOAD
3,0 m
3.0 4,5 m
4.5 6,0 m
6.0 7,5
7.5 m AT MAX. REACH

REACH
FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE m

E385BEL TRIPLE ARTICULATION

HEIGHT
+6,0 m
+6.0 7,4 *
7.4 7,4 *
7.4 5,9 *
5.9 5,9 *
5.9 4,3 *
4.3 4,3 *
4.3 9.34
9,34
+4,5 m
+4.5 17,9*
17.9* 17,9 *
17.9 11.4 *
11,4 11.4 *
11,4 8.2 *
8,2 8.2 *
8,2 6.2 *
6,2 6.2 *
6,2 4.3 *
4,3 4.0
4,0 9,83
9.83
+3,0 m
+3.0 15,0 *
15.0 13,8
13.8 9,5 *
9.5 8,9
8.9 6,7 *
6.7 6,2
6.2 4,4 *
4.4 3,7
3.7 10,08
10.08
+1,5 m
+1.5 16,0 *
16.0 12,6
12.6 11,2 *
11.2 8,2
8.2 7,3 *
7.3 5,9
5.9 4,5 *
4.5 3,6
3.6 10,10
10.10
0m 10.3*
10,3* 10.3 *
10,3 15,6 *
15.6 11,9
11.9 11,5 *
11.5 7,8
7.8 7,9 *
7.9 5,6
5.6 4,7 *
4.7 3,6
3.6 9,89
9.89
-1,5 m
-1.5 14,9*
14.9* 14,9 *
14.9 13,9 *
13.9 11,7
11.7 10,6 *
10.6 7,6
7.6 8,1 *
8.1 5,5
5.5 5,2 *
5.2 3,9
3.9 9,43
9.43
-3,0 m
-3.0 11,1 *
11.1 11,1 *
11.1 8,7 *
8.7 7,6
7.6 6,5 *
6.5 5,5
5.5 4,5 *
4.5 4,5 *
4.5 8,70
8.70
-4,5 m
-4.5

E385BLC TRIPLE ARTICULATION

HEIGHT
+6,0 m
+6.0 7,4 *
7.4 7,4 *
7.4 5,9 *
5.9 5,9 *
5.9 4,3 *
4.3 4,3 *
4.3 9.34
9,34
+4,5 m
+4.5 17,9*
17.9* 17,9 *
17.9 11.4 *
11,4 11.4 *
11,4 8.2 *
8,2 8.2 *
8,2 6.2 *
6,2 6.2 *
6,2 4.3 *
4,3 4.3 *
4,3 9,83
9.83
+3,0 m
+3.0 15,0 *
15.0 15,0 *
15.0 9,5 *
9.5 9,5 *
9.5 6,7 *
6.7 6,7 *
6.7 4,4 *
4.4 4,2
4.2 10,10
10.10
+1,5 m
+1.5 16,0 *
16.0 14,2
14.2 11,2 *
11.2 9,3
9.3 7,3 *
7.3 6,6
6.6 4,5 *
4.5 4,1
4.1 10,10
10.10
0m 10.3*
10,3* 10.3 *
10,3 15,6 *
15.6 13,5
13.5 11,5 *
11.5 8,8
8.8 7,9 *
7.9 6,3
6.3 4,7 *
4.7 4,1
4.1 9,89
9.89
-1,5 m
-1.5 14,9*
14.9* 14,9 *
14.9 13,9 *
13.9 13,3
13.3 10,6 *
10.6 8,6
8.6 8,1 *
8.1 6,2
6.2 5,2 *
5.2 4,4
4.4 9,30
9.30
-3,0 m
-3.0 11,1 *
11.1 11,1 *
11.1 8,7 *
8.7 8,6
8.6 6,5 *
6.5 6,2
6.2 4,5 *
4.5 4,5 *
4.5 8,70
8.70
-4,5 m
-4.5

E385BEL ONE-PIECE BOOM

HEIGHT
+6.0
+6,0 m 6,0 *
6.0 6,0 *
6.0 4,3 *
4.3 4,3 *
4.3 9,10
9.10
+4.5
+4,5 m 7.5 *
7,5 7.5 *
7,5 6.6 *
6,6 6.5
6,5 4.4 *
4,4 4.2
4,2 9.60
9,60
+3.0
+3,0 m 18.3*
18,3* 18.3 *
18,3 11.7 *
11,7 11.7 *
11,7 8,9 *
8.9 8,9
8.9 7,4 *
7.4 6,3
6.3 4,7 *
4.7 3,9
3.9 9,80
9.80
+1.5
+1,5 m 11,1*
11.1* 11,1 *
11.1 14,0 *
14.0 12,4
12.4 10,3 *
10.3 8,3
8.3 8,2 *
8.2 5,6
5.6 5,1 *
5.1 3,8
3.8 9,80
9.80
0m 13,0*
13.0* 13,0 *
13.0 15,4 *
15.4 11,8
11.8 11,3 *
11.3 7,9
7.9 8,8 *
8.8 5,8
5.8 5,8 *
5.8 3,8
3.8 9,60
9.60
-1.5
-1,5 m 16,5*
16.5* 16,5 *
16.5 15,9 *
15.9 11,8
11.8 11,7 *
11.7 7,8
7.8 9,0 *
9.0 5,6
5.6 6,9 *
6.9 4,0
4.0 9,20
9.20
-3.0
-3,0 m 21,5*
21.5* 21,5 *
21.5 15,4 *
15.4 12,2
12.2 11,4 *
11.4 7,9
7.9 8,7 *
8.7 5,6
5.6 7,3 *
7.3 4,6
4.6 8,40
8.40
-4.5
-4,5 m 19,1*
19.1* 19,1 *
19.1 13,6 *
13.6 12,8
12.8 10,1 *
10.1 8,1
8.1 7,6 *
7.6 5,9
5.9 7,30
7.30

E385BLC ONE-PIECE BOOM

HEIGHT
+6.0
+6,0 m 6,0 *
6.0 6,0 *
6.0 4,3 *
4.3 4,3 *
4.3 9,10
9.10
+4.5
+4,5 m 7.5 *
7,5 7.5 *
7,5 6.6 *
6,6 6.6 *
6,6 4.4 *
4,4 4.4 *
4,4 9.60
9,60
+3.0
+3,0 m 18.3*
18,3* 18.3 *
18,3 11.7 *
11,7 11.7 *
11,7 8,9 *
8.9 8,9 *
8.9 7,4 *
7.4 7,0
7.0 4,7 *
4.7 4,3
4.3 9,80
9.80
+1.5
+1,5 m 11,1*
11.1* 11,1 *
11.1 14,0 *
14.0 13,9
13.9 10,3 *
10.3 9,3
9.3 8,2 *
8.2 6,7
6.7 5,1 *
5.1 4,2
4.2 9,80
9.80
0m 13,0*
13.0* 13,0 *
13.0 15,4 *
15.4 13,3
13.3 11,3 *
11.3 8,9
8.9 8,8 *
8.8 6,5
6.5 5,8 *
5.8 4,3
4.3 9,60
9.60
-1.5
-1,5 m 16,5*
16.5* 16,5 *
16.5 15,9 *
15.9 13,4
13.4 11,7 *
11.7 8,8
8.8 9,0 *
9.0 6,4
6.4 6,9 *
6.9 4,6
4.6 9,20
9.20
-3.0
-3,0 m 21,5*
21.5* 21,5 *
21.5 15,4 *
15.4 13,9
13.9 11,4 *
11.4 8,9
8.9 8,7 *
8.7 6,4
6.4 7,3 *
7.3 5,2
5.2 8,40
8.40
-4.5
-4,5 m 19,1*
19.1* 19,1 *
19.1 13,6 *
13.6 13,6 *
13.6 10,1 *
10.1 9,1
9.1 7,6 *
7.6 6,6
6.6 7,30
7.30

As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static
tipping load. Values marked with an asterisk are limited by the hydraulic system.

21
 LIFTING CAPACITY
4150 mm DIPPERSTICK VALUES ARE EXPRESSED IN TONNES
RADIUS OF LOAD
3,0 m
3.0 4,5 m
4.5 6,0 m
6.0 7,5
7.5 m AT MAX. REACH

REACH
FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE m

E385EL TRIPLE ARTICULATION

HEIGHT
+6,0 m
+6.0 6,6
6.6 * 6,6 *
6.6 5,4 *
5.4 5,4 *
5.4 3,1
3.1 * 3,1 *
3.1 10,20
10.20
+4,5 m
+4.5 9.1
9,1 * 9.1 *
9,1 7.3
7,3 * 7.3 *
7,3 5.7 *
5,7 5.7 *
5,7 3.2
3,2 * 3.2 *
3,2 10.65
10,65
+3,0 m
+3.0 21.1 *
21,1 21.1 *
21,1 12,6
12.6 * 12,6 *
12.6 8,4
8.4 * 8,4 *
8.4 6,1 *
6.1 6,1 *
6.1 3,3
3.3 * 3,1
3.1 10,88
10.88
+1,5 m
+1.5 13,2 *
13.2 13,2 *
13.2 15,3
15.3 * 13,0
13.0 9,9
9.9 * 8,4
8.4 6,7 *
6.7 5,9
5.9 3,5
3.5 * 3,0
3.0 10,90
10.90
0m 11,4 *
11.4 11,4 *
11.4 15,7
15.7 * 12,0
12.0 11,4
11.4 * 7,8
7.8 7,3 *
7.3 5,6
5.6 3,8
3.8 * 3,1
3.1 10,70
10.70
-1,5 m
-1.5 14,0 *
14.0 14,0 *
14.0 14,8
14.8 * 11,5
11.5 10,9
10.9 * 7,5
7.5 7,8 *
7.8 5,3
5.3 4,2
4.2 * 3,3
3.3 10,29
10.29
-3,0 m
-3.0 17,1 *
17.1 17,1 *
17.1 12,7
12.7 * 11,4
11.4 9,6
9.6 * 7,3
7.3 7,3 *
7.3 5,2
5.2 4,3
4.3 * 3,6
3.6 9,62
9.62
-4,5 m
-4.5 9,4
9.4 * 9,4 *
9.4 7,3
7.3 * 7,3 *
7.3 5,3 *
5.3 5,3 *
5.3 3,9
3.9 * 3,9
3.9 8,46
8.46

E385BLC TRIPLE ARTICULATION

HEIGHT
+6,0 m
+6.0 6,6
6.6 * 6,6 *
6.6 5,4 *
5.4 5,4 *
5.4 3,1
3.1 * 3,1 *
3.1 10,00
10.00
+4,5 m
+4.5 9.1
9,1 * 9.1 *
9,1 7.3
7,3 * 7.3 *
7,3 5.7 *
5,7 5.7 *
5,7 3.2
3,2 * 3.2 *
3,2 10.65
10,65
+3,0 m
+3.0 21.1 *
21,1 21.1 *
21,1 12,6
12.6 * 12,6 *
12.6 8,4
8.4 * 8,4 *
8.4 6,1 *
6.1 6,1 *
6.1 3,3
3.3 * 3,3 *
3.3 10,88
10.88
+1.5
+1,5 m 13,2 *
13.2 13,2 *
13.2 15,3
15.3 * 14,6
14.6 9,9
9.9 * 9,4
9.4 6,7 *
6.7 6,6
6.6 3,5
3.5 * 3,5
3.5 10,90
10.90
0m 11,4 *
11.4 11,4 *
11.4 15,7
15.7 * 13,6
13.6 11,4
11.4 * 8,8
8.8 7,3 *
7.3 6,3
6.3 3,8
3.8 * 3,5
3.5 10,70
10.70
-1,5 m
-1.5 14,0 *
14.0 14,0 *
14.0 14,8
14.8 * 13,1
13.1 10,9
10.9 * 8,5
8.5 7,8 *
7.8 6,1
6.1 4,2
4.2 * 3,7
3.7 10,29
10.29
-3.0
-3,0 m 17,1 *
17.1 17,1 *
17.1 12,7
12.7 * 12,7 *
12.7 9,6
9.6 * 8,3
8.3 7,3 *
7.3 6,0
6.0 4,3
4.3 * 4,1
4.1 9,62
9.62
-4.5
-4,5 m 9,4
9.4 * 9,4 *
9.4 7,3
7.3 * 7,3 *
7.3 5,3 *
5.3 5,3 *
5.3 3,9
3.9 * 3,9 *
3.9 8,46
8.46

E385BEL ONE-PIECE BOOM

HEIGHT
+6.0
+6,0 m 3.1
3,1 * 3.1 *
3,1 10.00
10,00
+4.5
+4,5 m 5.8 *
5,8 5.8 *
5,8 3,2
3.2 * 3,2 *
3.2 10,40
10.40
+3.0
+3,0 m 13.9 *
13,9 13.9 *
13,9 9,8
9.8 * 9,8 *
9.8 7.8
7,8 * 7.8 *
7,8 6,6 *
6.6 6,3
6.3 3,4
3.4 * 3,3
3.3 10,60
10.60
+1.5
+1,5 m 19,1 *
19.1 19,1 *
19.1 12.5
12,5 * 12.5 *
12,5 9,3
9.3 * 8,4
8.4 7,5 *
7.5 6,0
6.0 3,7
3.7 * 3,2
3.2 10,60
10.60
0m 14,2 *
14.2 14,2 *
14.2 14,5
14.5 * 11,8
11.8 10,5
10.5 * 7,9
7.9 8,3 *
8.3 5,7
5.7 4,2
4.2 * 3,2
3.2 10,40
10.40
-1.5
-1,5 m 15,6 *
15.6 15,6 *
15.6 15,5
15.5 * 11,6
11.6 11,3
11.3 * 7,7
7.7 8,8 *
8.8 5,5
5.5 4,9
4.9 * 3,4
3.4 10,00
10.00
-3.0
-3,0 m 18,9 *
18.9 18,9 *
18.9 15,7
15.7 * 11,9
11.9 11,5
11.5 * 7,7
7.7 8,8 *
8.8 5,5
5.5 6,1
6.1 * 3,8
3.8 9,30
9.30
-4.5
-4,5 m 21,5 *
21.5 21,5 *
21.5 14,7
14.7 * 12,4
12.4 10,8
10.8 * 7,8
7.8 8,1 *
8.1 5,5
5.5 6,8
6.8 * 4,6
4.6 8,30
8.30

E385BLC ONE-PIECE BOOM

HEIGHT
+6.0
+6,0 m 3.1
3,1 * 3.1 *
3,1 10.00
10,00
+4.5
+4,5 m 5.8 *
5,8 5.8 *
5,8 3,2
3.2 * 3,2 *
3.2 10,40
10.40
+3.0
+3,0 m 13.9 *
13,9 13.9 *
13,9 9,8
9.8 * 9,8 *
9.8 7.8
7,8 * 7.8 *
7,8 6,6 *
6.6 6,6 *
6.6 3,4
3.4 * 3,4 *
3.4 10,60
10.60
+1.5
+1,5 m 19,1 *
19.1 19,1 *
19.1 12.5
12,5 * 12.5 *
12,5 9,3
9.3 * 8,4
8.4 7,5 *
7.5 6,7
6.7 3,7
3.7 * 3,6
3.6 10,60
10.60
0m 14,2 *
14.2 14,2 *
14.2 14,5
14.5 * 13,4
13.4 10,5
10.5 * 9,0
9.0 8,3 *
8.3 6,4
6.4 4,2
4.2 * 3,7
3.7 10,40
10.40
-1.5
-1,5 m 15,6 *
15.6 15,6 *
15.6 15,5
15.5 * 13,2
13.2 11,3
11.3 * 8,7
8.7 8,8 *
8.8 6,2
6.2 4,9
4.9 * 3,9
3.9 10,00
10.00
-3.0
-3,0 m 18,9 *
18.9 18,9 *
18.9 15,7
15.7 * 13,5
13.5 11,5
11.5 * 8,7
8.7 8,8 *
8.8 6,2
6.2 6,1
6.1 * 4,3
4.3 9,30
9.30
-4.5
-4,5 m 21,5 *
21.5 21,5 *
21.5 14,7
14.7 * 14,1
14.1 10,8
10.8 * 8,9
8.9 8,1 *
8.1 6,2
6.2 6,8
6.8 * 5,2
5.2 8,30
8.30

As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static
tipping load. Values marked with an asterisk are limited by the hydraulic system.

22
 LIFTING CAPACITY
2150 mm DIPPERSTICK VALUES ARE EXPRESSED IN TONNES
RADIUS OF LOAD
3,0 m
3.0 4,5 m
4.5 6,0 m
6.0 7,5
7.5 m AT MAX. REACH

REACH
FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE FRONT SIDE m

E385B-BEH
HEIGHT
+6,0 m
+6.0 8,7 *
8.7 8,7 *
8.7 8,5 *
8.5 7,3
7.3 6,90
6.90
+4,5 m
+4.5 9.7 *
9,7 9.7 *
9,7 9.0 *
9,0 9.0 *
9,0 8.4 *
8,4 6.2
6,2 8.4 *
8,4 6.1
6,1 7.50
7,50
+3,0 m
+3.0 9,7 *
9.7 9,7 *
9.7 9,4 *
9.4 8,3
8.3 8,7 *
8.7 6,0
6.0 8,5 *
8.5 5,5
5.5 7,90
7.90
+1,5 m
+1.5 10,0 *
10.0 9,2
9.2 9,8 *
9.8 7,3
7.3 9,0 *
9.0 5,8
5.8 8,6 *
8.6 5,4
5.4 7,90
7.90
0m 10,8 *
10.8 7,6
7.6 10,4 *
10.4 6,9
6.9 9,0 *
9.0 5,7
5.7 8,8 *
8.8 5,6
5.6 7,60
7.60
-1,5 m
-1.5 12.5 *
12,5 8,7
8.7 11,8 *
11.8 8,1
8.1 10,6 *
10.6 7,3
7.3 8,8 *
8.8 6,4
6.4 7,00
7.00
-3,0 m
-3.0 13,0 *
13.0 13.0 *
13,0 11,5 *
11.5 10,5
10.5 8,6 *
8.6 8,2
8.2 6,00
6.00
-4,5 m
-4.5

As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of static
tipping load. Values marked with an asterisk are limited by the hydraulic system.

Standard
EQUIPMENT
 Automatic fuel electrical pump  Horn
 Auto-Idling device  Hydraulically suspended cab with transparent roof
 Automatic air conditioner  Main control valve with two dipper spools and antidrift valves
 Batteries maintenance free  Mechanical cushioned seat
 Centralised boom lubrication  Multi-function monitor
 Continuous Power Boost device  One piece boom or triple articulation or BEH
 Cushioning on hydraulic cylinders  Pressure drain switch
 Dipperstick protection  Radio set
 Double pump flow  Rear mirror
 Engine rpm electronic control  Swing and travel motors with automatic disc type brakes
 EVO cab, FOPS and ROPS in compliance with Machine Directive  TIER 3A emissioned diesel engine
 Foot pedal or lever travel control  Tool kit
 Front seal hydraulic piping and connections  Two travel speed with Automatic Down Shift device
 Grease bath swing ring  Two working lights on boom and one on upperstructure
 H.A.O.A. (Hydrotronic Active Operation Aid)  Two-speed intermittent operation windshield wiper
 HD chains

OPTION
 Antitheft device  Hydraulic quick coupler provision
 Automatic lubrication  Lower frame cover
 Biological hydraulic oil  Multipurpose rock and heavy duty buckets
 Cab additional lights and rain protection with bucket/boom adjustment device
 Customer colour  Object handling kit
 Front and rear additional track guide  Pneumatic cushioned and heated seat
 Front Guard protection for cab ( FOG in compliance with  Rear view camera with dedicated display (replacing rear mirror)
Machine Directive)  Rotating bucket circuit
 Hammer and crusher circuit  Shoes:
 HD Dipperstick: BEL/BEH: 600 - 700 - 800 mm
2150 mm (BEH version) BLC: 600 - 700 - 800 - 900 mm
2330 mm
2600 mm
3300 mm
4150 mm

Note: standard and optional equipment may vary by country. Consult your NEW HOLLAND dealer for specific details.
23
NEW HOLLAND.
THE POWER OF A GLOBAL BRAND
New Holland is a global brand with a key position in the Construction Equipment business.
It supplies a complete range of 13 product lines and 80 basic models split into Compact line
and Heavy line. It operates in all the main markets, such as Europe, North and Latin America,
Africa, Asia and Middle East with the same technology and under the same logo and brand.
It manufactures durable, safe and productive machines aimed at supporting customers in
developing their own business.Dealers are company partners. They play an important role to
support the brand in their territories through intense professional relationship with Customers.
New Holland is reinforced by its global alliance with Kobelco: world leader
in hydraulic excavator technology.

AT YOUR OWN DEALERSHIP

The information contained in this brochure is intended to be a general nature only. The NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. company may
at any time and from time to time, for technical or other necessary reasons, modify any of the details or specifications of the product described in this brochure. Illustrations
do not necessarily show products in standard conditions. The dimensions, weights and capacities shown herein, as well as any conversion data used, are approximate
only and are subject to variations within normal manufactoring techniques.

Published by NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. Printed on recycled paper
Printed in Italy - MediaCross Firenze - Cod. 31 436GB - Printed 02/11 CoC-FSC 000010 CQ Mixed sources

w w w. n e w h o l l a n d . c o m