Scribd
Upload
30 views2 pages

Controlling Coin Acceptor With Arduino

\ZXZ\

Uploaded by

ANTONIO COBALLES
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
30 views2 pages

Controlling Coin Acceptor With Arduino

\ZXZ\

Uploaded by

ANTONIO COBALLES
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

//Mario's Ideas

//Controlling coin acceptor with Arduino

#include <Arduino.h>
#include <TM1637Display.h>
#include <EEPROM.h>

// Module connection pins (Digital Pins)


#define CLK 3
#define DIO 4

TM1637Display display(CLK, DIO);

// variable use to measuer the intervals inbetween impulses


int i=0;
// Number of impulses detected
int impulsCount=0;
// Sum of all the coins inseted
float total_amount=0;

void setup() {
// pinMode(2, INPUT_PULLUP);
Serial.begin(9600);
display.setBrightness(0x0f);
// Interrupt connected to PIN D2 executing IncomingImpuls function when signal
goes from HIGH to LOW
attachInterrupt(0,incomingImpuls, FALLING);
EEPROM.get(0, total_amount);
display.clear();

void incomingImpuls()
{
impulsCount=impulsCount+1;
i=0;
}

void loop() {
i=i+1;

Serial.print("i=");
Serial.print(i);
Serial.print(" Impulses:");
Serial.print(impulsCount);
Serial.print(" Total:");
Serial.println(total_amount);

if (i>=30 and impulsCount==1){


total_amount=total_amount+2;
impulsCount=0;
EEPROM.put(0, total_amount);
}
if (i>=30 and impulsCount==2){
total_amount=total_amount+1;
impulsCount=0;
EEPROM.put(0, total_amount);
}
if (i>=30 and impulsCount==3){
total_amount=total_amount+0.5;
impulsCount=0;
EEPROM.put(0, total_amount);
}
if (i>=30 and impulsCount==4){
total_amount=total_amount+0.2;
impulsCount=0;
EEPROM.put(0, total_amount);
}
if (i>=30 and impulsCount==5){
total_amount=total_amount+0.1;
impulsCount=0;
EEPROM.put(0, total_amount);
}

if(total_amount<10) display.showNumberDecEx(total_amount*10, 0b10000000, true, 2,


2);
else
display.showNumberDecEx(total_amount*10, 0b00100000, false, 4, 0);
}

You might also like