Read these instructions. 12. Use only with the cart, stand, tripod, bracket or table 2. 3. Keep these instructions. Heed all warnings. specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart Important Safety Instructions 4. Follow all instructions. apparatus combination to avoid injury from tip-over. 5. Do not1.use this apparatus near water. 13. Unplug this apparatus during lightning storms or when Fcc aNd ic REgulaTioNs (usa aNd caNada oNlY) 6. Clean only with a dry cloth. unused for long periods of time. 7. Do not block any ventilation openings. Install in accordance 14. Refer all servicing to qualified service personnel. Servicing Fcc aNd ic iNFoRMaTioN FoR usERs: with the manufacturer’s instructions. is required when the apparatus has been damaged in any This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS 210. Operation is 8. Do not install near any heat sources such as radiators, heat way, such as: when the power supply cord or plug has subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” registers, stoves or other apparatus (including amplifiers) become damaged, when liquid has been spilled or objects that produce heat. have fallen into the apparatus, when the apparatus has Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de 9. Do not defeat the safety purpose of the polarized or been exposed to rain or moisture, when the apparatus does licence. L’exploitation est autorisée aux deux conditions suivantes (1) l’appareil nedoit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est suscep- grounding-type plug. A polarized plug has two blades with not operate normally, or the apparatus has been dropped. tible d’en compromettre le fonctionnement.” one wider than the other. A grounding-type plug has two 15. Do not expose this apparatus to dripping or splashing and Rss-102 statement: This equipment complies with Industry Canada radiation exposure limits set forth for an blades and a third grounding prong. The wide blade or the ensure that no objects filled with liquids, such as vases, are uncontrolled environment. third prong is provided for your safety. If the provided plug placed on the apparatus. Déclaration CNR-102: Cet équipement est conforme à l’exposition aux rayonnements Industry Canada limites does not fit into your outlet, consult an electrician for 16. To completely disconnect this apparatus from the AC établies pour un environnement non contrôlé. replacement of the obsolete outlet. mains, disconnect the power supply cord plug from the AC 10. Protect the power cord from being walked on or pinched, receptacle. nOTe: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu- particularly at plugs, convenience receptacles and the point 17. The mains plug of the power supply cord shall remain ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful where they exit from the apparatus. readily operable. interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy 11. Only use attachments/accessories specified by the manu- 18. Do not expose batteries to excessive heat such as sun- and, if not installed and used in accordance with the instructions, may cause harmful interference to radio facturer. shine, fire or the like. communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: CAUTION • Reorient or relocate the receiving antenna. RISK OF ELECTRIC SHOCK • Increase the separation between the equipment and receiver. DO NOT OPEN • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. THE LIGHTNING FLASH WITH AN ARROWHEAD WARNING: TO REDUCE THE RISK OF FIRE OR THE EXCLAMATION POINT WITHIN AN EQUILA-TER- SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, ELECTRIC SHOCK, DO NOT EXPOSE THIS AL TRIANGLE IS INTENDED TO ALERT THE USER IS INTENDED TO ALERT THE USER TO THE PRE- APPARATUS TO RAIN OR MOISTURE. TO THE PRESENCE OF IMPORTANT OPERATING AND cauTioN: ExPosuRE To Radio FREquENcY RadiaTioN SENCE OF UNINSULATED "DANGEROUS VOLTAGE" MAINTENANCE (SERVICING) INSTRUCTIONS IN THE WITHIN THE PRODUCT'S ENCLOSURE THAT MAY LITERATURE ACCOMPANYING THE PRODUCT. To comply with FCC RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter. BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE cauTioN: Changes or modifications not expressly approved in writing by HARMAN International may void the user’s authority to operate this equipment. A RISK OF ELECTRIC SHOCK TO PERSONS.
SEE MARKING ON BACK OF PRODUCT.
1x DC 5V, 2A
1x
1x 1x 1. 2.
Blue/Red
3s 3.
Blue
JBL Charge 0-0-0-0
Battery Unit is off needs charging Flashing red
Battery Unit is on;
level low Bluetooth Continuous blue not connected
Battery Flashing blue
level medium Continuous blue Unit is on; Bluetooth Battery in pairing mode level high Continuous blue Flashing blue/red
Unit is on; Bluetooth connected
Continuous blue Battery Unit is off needs charging Flashing red
Battery Unit is on;
level low Bluetooth Continuous blue not connected
Battery Flashing blue
level medium Continuous blue Unit is on; Bluetooth Battery in pairing mode level high Continuous blue Flashing blue/red
Unit is on; Bluetooth connected
Continuous blue Battery Unit is off needs charging Flashing red
Battery Unit is on;
level low Bluetooth Continuous blue not connected
Battery Flashing blue
level medium Continuous blue Unit is on; Bluetooth Battery in pairing mode level high Continuous blue Flashing blue/red
Unit is on; Bluetooth connected
Continuous blue Battery Unit is off needs charging Flashing red
Battery Unit is on;
level low Bluetooth Continuous blue not connected
Battery Flashing blue
level medium Continuous blue Unit is on; Bluetooth Battery in pairing mode level high Continuous blue Flashing blue/red
Unit is on; Bluetooth connected
Continuous blue Battery Unit is off needs charging Flashing red
Battery Unit is on;
level low Bluetooth Continuous blue not connected
Battery Flashing blue
level medium Continuous blue Unit is on; Bluetooth Battery in pairing mode level high Continuous blue Flashing blue/red
Unit is on; Bluetooth connected
Continuous blue Battery Unit is off needs charging Flashing red
Battery Unit is on;
level low Bluetooth Continuous blue not connected
Battery Flashing blue
level medium Continuous blue Unit is on; Bluetooth Battery in pairing mode level high Continuous blue Flashing blue/red
Unit is on; Bluetooth connected
Continuous blue Battery Unit is off needs charging Flashing red
Battery Unit is on;
level low Bluetooth Continuous blue not connected
Battery Flashing blue
level medium Continuous blue Unit is on; Bluetooth Battery in pairing mode level high Continuous blue Flashing blue/red
Unit is on; Bluetooth connected
Continuous blue Battery Unit is off needs charging Flashing red
Battery Unit is on;
level low Bluetooth Continuous blue not connected
Battery Flashing blue
level medium Continuous blue Unit is on; Bluetooth Battery in pairing mode level high Continuous blue Flashing blue/red
