BP2328DJ

Non-isolated Buck APFC Offline LED Driver

Description Features
The BP2328DJ is a high precision non-isolated buck  Active PFC for High Power Factor and Low THD
driver with active PFC, specially designed for universal  Internal 650V Power MOSFET
input offline constant current LED lighting. The driver  System Efficiency up to 95%
with on-chip PFC circuit achieves high power factor  ±3% LED Output Current Accuracy
and low THD. Operating in critical conduction mode,  Excellent Line and Load Regulation
the power MOSFET switching loss is reduced and the  Critical Conduction Mode Operation
inductor is fully utilized.  Ultra Low (33uA) Start Up Current
 Ultra Low (300uA) Operating Current
The BP2328DJ integrates a 650V power MOSFET.
 LED Short/Open Protection
With few external components, the LED output current
 Current Sensing Resistor Open Protection
can be precisely controlled.
 Cycle by Cycle Current Limit
The BP2328DJ utilizes patent pending floating ground  VCC Under Voltage Protection
structure. The inductor current is sensed during the  Auto Fault Recovery
whole switching cycle. So it achieves high precision  Thermal Regulation Function
output current control, and excellent line regulation and  Available in DIP8 Package
load regulation.
Applications
The BP2328DJ offers rich protection functions to
 GU10/E27 LED Bulb, Spot Light
improve the system reliability, including LED open
 PAR30, PAR38 Lamp
circuit protection, LED short circuit protection, VCC
 T8/T10 LED String
under voltage protection, CS resistor open circuit
 Other LED Lightin
protection and cycle by cycle current limit. All the
protection functions are auto-recovery. The system
reliability is further improved by the thermal regulation
function. The output current is reduced when the driver
is over temperature.

Typical Application

BP2328DJ
5 DRAIN FB 4

6 DRAIN CS 8

3 VCC CS 7

1 COMP GND 2

AC

Figure 1. Typical application circuit for BP2328DJ

BP2328DJ_EN _DS_Rev.1.2 www.bpsemi.com 1

Bright Power Semiconductor Co. Confidential – Customer Use Only
 BP2328DJ
Non-isolated Buck APFC Offline LED Driver

Ordering Information

Part Number Package Operating Packing Method Marking

Temperature
Tube BP2328D
BP2328DJ DIP8 -40 ℃ to 105 ℃ XXXXXY
50 Pcs/Tube WXYYJ

Pin Configuration and Marking Information

COMP CS
XXXXXY: Lot Code
BP2328D W: Sign
XXXXXY
GND CS
WXYYJ

X: Year
VCC DRAIN
YY: Week
FB DRAIN

Figure 2. Pin configuration

Pin Definition
Pin No. Name Description
Loop Compensation Node. This pin connects a capacitor to GND for
1 COMP stabilization of the control loop, achieving accurate LED current, high
Power Factor and low THD.
2 GND Ground.

3 VCC Power Supply Pin. Connect a bypass capacitor from this pin to GND.
Feedback Voltage Input Pin. This pin detects the inductor
4 FB
demagnetization signal and the output voltage.
5,6 DRAIN Internal HV Power MOSFET Drain.
Current Sense Pin. Connect a resistor to GND to sense the inductor
7,8 CS
current.

BP2328DJ_EN _DS_Rev.1.2 www.bpsemi.com 2

Bright Power Semiconductor Co. Confidential – Customer Use Only