BRANCH CIRCUIT

POWER MONITORS
For high-density power metering where space really matters.

IDEAL EFFICIENT EASY ENERGY

FOR SMALLER USE OF MANAGEMENT
OR CROWEDED AVAILABLE AND ENERGY
ELECTRICAL SPACE AND BILLING
PANELS. RESOURCES. SERVICES.

l For remote reading and control, l Ideal for apartments / commercial l Pass-through wiring: No separate
the Eltag is supported by complexes billing and load pattern spacing requirements for CT and
So ware, designed for remote study on individual phase CT cabling as EL-Tag offers direct
setup and data viewing and l Individual phase kWh pass through features (32A, 50A).
analysis measurement provides user l A highly compact device: EL-Tag
l Building Management System: flexibility of measuring 3 phase 3 occupies only an area of 165mm x
With the open modbus protocol, channels or single phase 9 25mm (compared to the
the Eltag can interface any system, channels conventional 3 metering devices
such as building management, l Primary current can be (3 phase) and 9 metering devices
HMI etc. independently configured making (1 phase), thus reducing the space
l Installation time can be reduced it ideal for any kind of industry or requirement by more than 80%
by more than half upgradation compared to the other devices.

l Auto learning of phase protection,

including neutral current
 HIGH END BRANCH
Motor/ Pumps
Load

A/C Load LMS Data Center

CIRCUIT MONITOR FOR

COMPREHENSIVE
ENERGY
MANAGEMENT

Digital Multifunction Meter EL-Tag

Master Meter for Branch Circuit Monitor Branch Circuit Monitor

l High / Low recording VLL, VLN, A, Hz, W, VA, PF, VAR l True RMS measurements
value storage with time stamp l Simultaneous sampling of Volts & Amps
l Accuracy Class 1, 0.5s optional l User programmable password protection
l Voltage measurement up to 600 VLL l Supports both with Display and without display (ET5730 and ET5030)
l Display Basic, Power, Energy, Demand for both Import l Multi-channel data collection
and Export parameters l Direct measurement up to 63A Pass through
l Simultaneous sampling of Voltage and Current, l Attachable to any MCB (for same Brand MCB)
l Programmable PT & CT ratio l Stand alone with Din rail Mounting and RS 485
l User programmable Password Protection l Configurable phase selection through RS 485
l Measures THD and Individual harmonics up to 63rd l Auto learning of Phases or Neutral (CT polarity to be maintained)
order with a sampling rate of 512 samples / cycle l THD voltage & current measurement for all channels
l Captures and measures power quality events: K l 3 Phase, 3 channels or Single phase 9 channels
factor, Crest factor, Sag / Swell, Interruption and
l Pluggable up to 12 making 3 phase 36 channels or single phase
Unbalance in accordance with EN 50160
108 channels
l Representation of waveforms for instantaneous V, I, l Space saving of one MCB width, 1/4th MCB length per channel
Sag / Swell, Voltage and current harmonics histogram
l Installation time reduces to 1/5th
for PN 8700
l Energy resetting @ 999999 kWh x TR
l Records events such as Sag / Swell for voltage with the
time stamp in 1s duration
l CO2 emission, ON Hrs, Power Interruptions
l Max demand 4 high / 4 low, 12am snapshot, 31st day BM Series
snapshot DIN-Rail Meters
l Demand update every second to forecast VA, W &
VAR accurately
l Programmable starting current in % of 5A secondary.
Default 10mA
l Programmable Auto scrolling time - 1 sec. to 10 sec.
l Multi-channel data collection
(Default 5 sec.)
l 3 Phase, 4 channels or Single phase 12 channels
l Programmable Energy format - Counter based or
Resolution based l Displays Basic, Power and Energy parameters
l Phase wise Voltage Sag & Swell Wave Forms l Default RS 485
l LCD 8 parameter display at a time, 8 Digits energy l Space saving compact design for easy installation into existing panel boards
l Power save mode with Enable/Disable option l True RMS measurements
l Byte order option - Field Programmable Float / Little l Simultaneous sampling of Volts & Amps
Endian / Big Endian data format
l Accuracy class 1.0 as per IEC 62053-21, Class 0.5 as per IEC 62053-22.
l High / Low recording VLL, VLN, A, Hz, W, VA, PF, VAR
value storage with time stamp l User programmable password protection
l Energy resetting at 99999999 kVAh x MF. l Energy resetting @ 999999 KWh × Transformer Ratio
l OLD register to store previously cleared Energy & Load l Displays more than 25 parameters - Basic [VLL, VLn, A (Average & Phasewise),
hours F ], Power [W, PF, VA (Total & Phasewise)] and Energy [Wh, LH]

18 elmeasure.com
Product Selection
PN8700M ET 5030 ET 5730 ET 5720 BM 5140
Parameters Graphical LCD No Display With Display (MOQ) With Display (MOQ) LED
ACCURACY OPTION
CLASS 1.0
CLASS 0.5S / CLASS 0.2S
BASIC PARAMETERS
V12 V23 V31
V V1 V2 V3
A A1 A2 A3
Hz
Angle V & A, RPM
Unbalance V & A
POWER PARAMETERS
W W1 W2 W3
VA VA1 VA2 VA3
PF PF1 PF2 PF3
VAR VAR1, VAR2, VAR3
ENERGY - IMPORT
THD - Voltage and Current
Individual Harmonics upto 63rd
K Factor, Crest Factor
High Low - Instantaneous
High Low - Last Minute
Voltage Sag, Swell & Interruptions
Power Cycles
TEHD and TOHD
Power THD and TDD
INTEGRATED PARAMETERS
Wh
VAh
VARh - Ind
VARh - Cap
Load Hours
Phase Energy and Load Hours
RD (IE)
Wh - Total and Net
Vah - Total and Net
ON Hours
Co2 Emission
Volt Squared Hours
Amp Squared Hours
TOD PARAMETERS
TOD Demand - Import
TOD Energy - Import and Export
DEMAND PARAMETERS
Rising Demand (Sliding/Block - Programmable)
Forecast Demand
Maximum Demand
Demand Profile - 4 high and 4 low
ADDITIONAL FEATURES
12AM & 31st day snap shot
Data Logger - 1MB
Load Efficiency
Energy Trends
Dynamic Communication
Dual Source
COMMUNICATION
RS485 (MODBUS)
Default * Through communication Optional

Mechanical Specification Current Transformers

67
72

86

Hang on CT-
25
90 5A or 50A or 100A or 200A Up to 100A, 16mm ID

45

193

49
35 Clip on
CT-5A | 50A | 100A | 250A Split Core CT-100A | 400A | 1000A

elmeasure.com 19
Technical Specification
Specification PN8700M (Master Meter) EL-TAG BM Series

GENERAL CHARACTERISTICS
Display type: LCD 4 row, 7/8 parameter, Integrated 4 Without display 1 row 6 digit for integrated,
LCD display (optional) 4 digit for instantaneous
Sensing / Measurement: True RMS, 1 sec. update time, 4 quadrant True RMS, 1 sec. update time, True RMS, 1 sec. update time,
power and energy. 2 quadrant power and energy. 4 quadrant power and energy.
Rated Voltage: 50-600 VLL
Rated Current: 10mA - 6A 10mA-6A, 50mA-32A, 100mA-63A Optional through external CT
Frequency: 45 - 65Hz
Poles Description: 1P + N, 3P, 3P + N 3 phase, 3 channel 3 phase, 4 channel
Sampling Rate: 512 samples / cycle 128 samples / cycle
Measured Accuracy Class: Class 1.0 as per IEC 62053-21 / Class 0.5 / Class 1.0: IEC 62053-21 (Default)
Class 0.2S as per IEC 62053-22 (Optional) Class 0.5: IEC 62053-22 (Optional)
Programmable Setting: 110 or 415V LL Nominal & Primary programmable up to 999 kV, Burden: 0.2VA Max. per phase
Permissible Overload: 120%, Burden: 0.2VA per phase
External Fuse Rating 200mA NA
CT PT Ratio Max.: 2000MVA programmable
Auxiliary Supply: 80-300V AC/DC Self Powered 80-300V AC/DC, 40-70Hz
Burden: 4VA Max. Burden: 4VA Max.
Power Consumption: 4VA nominal
Data Update Rate: 1 sec.
COMMUNICATION
Device ID & Parity: 1 to 247 & Odd, Even, None (Preferred Even) 1 to 247 & Odd, Even, None
Protocol & Interface MODBUS, RTU, RS485, RS485 for stand alone. RS485 Interface
Baud Rate: 9600 bps to 38400 bps (Preferred 9600 bps) 4800 bps to 19200bps.
Isolation: 2000 volts AC isolation for 1 minute between 2000 volt AC isolation for 1
communication & other circuits. minute between communication
and other circuits
PROTECTION CLASS
Ingress Protection: IP 51 (IP 54 front facia optional) & Double insulation (As per IEC 61010-1)
ELECTROMAGNETIC COMPATIBILITY
Electrostatic discharge: IEC 61000-4-2
Immunity to electromagnetic RF fields: IEC 61000-4-3
Conducted immunity: IEC 61000-4-6
Immunity to magnetic fields: IEC 61000-4-8
Immunity to voltage dips and interruptions: IEC 61000-4-11
Immunity to surge waves: IEC 61000-4-5
Fast transient: IEC 61000-4-4
Conducted and radiated emission: CISPR - 22
SAFETY AND STANDARDS
Construction: IEC/EN 61010-1 edition 3, CAT III, 300V LN / 600V LL, Protection class II
Standards: UL 61010-1, IEC/EN 62052-11
MECHANICAL CHARACTERISTICS
Weight Unpacked: 350g, Packed: 450g. 200g Unpacked: 275g, Packed: 350g.
It may vary based on optional features. Weight of the CTʼs excluded.
Torque: 1 N-m (for 5A) 0.4 N-m 1 N-m
Wire Gauge: 11 AWG (for 5A) 26-10AWG (4.0mm2) 11 AWG
Voltage and communication

ENVIRONMENTAL CHARACTERISTICS WiFi Communication (Optional)

Operating Temperature: -10ᵒC to +55ᵒC (14ᵒF - 131ᵒC) WiFi Protocol: 802.11 b/g/n (Network protocol: Ipv4, TCP)
Storage temperature: -25ᵒC to +70ᵒC (-13ᵒF - 158ᵒF) Frequency: 2.4 Ghz - 2.5 Ghz
Humidity: 5% to 95% non-contensing Security: WP/WPA2, WPA-PSK/WPA2-PSK
Altitude: Below 2000mts Encryption: WEP/TKIP/AES
Measurement Category: CAT III Minimum sensing range: 20%
Pollution Degree: 2 (As per IEC 61010) Receive Sensitivity: -83 dBm Typical

20 elmeasure.com