Scribd
Upload
13 views

Verilog Assignment3

The document describes the design and simulation of different types of adders in Verilog including half adder, full adder, 4-bit adder and 8-bit adder. It also includes the code and test benches to test different test cases. The document further explains the design and simulation of an 8 to 1 multiplexer.

Uploaded by

Researchpro Global
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
13 views

Verilog Assignment3

The document describes the design and simulation of different types of adders in Verilog including half adder, full adder, 4-bit adder and 8-bit adder. It also includes the code and test benches to test different test cases. The document further explains the design and simulation of an 8 to 1 multiplexer.

Uploaded by

Researchpro Global
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Verilog assignment

Part A
Code
module HalfAdder(
input wire A,
input wire B,
output wire Sum,
output wire Cout
);
assign Sum = A ^ B;
assign Cout = A & B;
endmodule

module FullAdder(
input wire A,
input wire B,
input wire Cin,
output wire Sum,
output wire Cout
);
wire Sum1, Cout1, Cout2;

HalfAdder HA1(.A(A), .B(B), .Sum(Sum1), .Cout(Cout1));


HalfAdder HA2(.A(Sum1), .B(Cin), .Sum(Sum), .Cout(Cout2));

assign Cout = Cout1 | Cout2;


endmodule

module FourBitAdder(
input [3:0] A,
input [3:0] B,
input Cin,
output [3:0] Sum,
output Cout
);
wire [3:0] Sum1;
wire Cout4;

FullAdder FA0(.A(A[0]), .B(B[0]), .Cin(Cin), .Sum(Sum[0]), .Cout(Cout4));


FullAdder FA1(.A(A[1]), .B(B[1]), .Cin(Cout4), .Sum(Sum[1]), .Cout(Cout4));
FullAdder FA2(.A(A[2]), .B(B[2]), .Cin(Cout4), .Sum(Sum[2]), .Cout(Cout4));
FullAdder FA3(.A(A[3]), .B(B[3]), .Cin(Cout4), .Sum(Sum[3]), .Cout(Cout));

endmodule

module EightBitAdder(
input [7:0] A,
input [7:0] B,
input Cin,
output [7:0] Sum,
output Cout
);
wire [3:0] Sum1;
wire Cout1, Cout2;

FourBitAdder FBA1(.A(A[3:0]), .B(B[3:0]), .Cin(Cin), .Sum(Sum1), .Cout(Cout1));


FourBitAdder FBA2(.A(A[7:4]), .B(B[7:4]), .Cin(Cout1), .Sum(Sum[3:0]), .Cout(Cout2));

assign Cout = Cout2;

endmodule
///////////////////////////////////////////////
module HalfAdder_TB;
// Inputs
reg A;
reg B;

// Outputs
wire Sum;
wire Cout;

// Instantiate the HalfAdder module


HalfAdder UUT (
.A(A),
.B(B),
.Sum(Sum),
.Cout(Cout)
);

// Stimulus generation
initial begin
// Test case 1: A=0, B=0
A = 1'b0;
B = 1'b0;
#10; // Wait for a few simulation cycles
$display("Test case 1: A=0, B=0 => Sum=%b, Cout=%b", Sum, Cout);

// Test case 2: A=0, B=1


A = 1'b0;
B = 1'b1;
#10; // Wait for a few simulation cycles
$display("Test case 2: A=0, B=1 => Sum=%b, Cout=%b", Sum, Cout);

// Test case 3: A=1, B=0


A = 1'b1;
B = 1'b0;
#10; // Wait for a few simulation cycles
$display("Test case 3: A=1, B=0 => Sum=%b, Cout=%b", Sum, Cout);

// Test case 4: A=1, B=1


A = 1'b1;
B = 1'b1;
#10; // Wait for a few simulation cycles
$display("Test case 4: A=1, B=1 => Sum=%b, Cout=%b", Sum, Cout);

$finish; // End the simulation


end

endmodule
/////////////////////////
module FullAdder_TB;

// Inputs
reg A;
reg B;
reg Cin;

// Outputs
wire Sum;
wire Cout;

// Instantiate the FullAdder module


FullAdder UUT (
.A(A),
.B(B),
.Cin(Cin),
.Sum(Sum),
.Cout(Cout)
);

// Stimulus generation
initial begin
// Test case 1: A=0, B=0, Cin=0
A = 1'b0;
B = 1'b0;
Cin = 1'b0;
#10; // Wait for a few simulation cycles
$display("Test case 1: A=0, B=0, Cin=0 => Sum=%b, Cout=%b", Sum, Cout);

// Test case 2: A=0, B=1, Cin=0


A = 1'b0;
B = 1'b1;
Cin = 1'b0;
#10; // Wait for a few simulation cycles
$display("Test case 2: A=0, B=1, Cin=0 => Sum=%b, Cout=%b", Sum, Cout);

// Test case 3: A=1, B=0, Cin=1


A = 1'b1;
B = 1'b0;
Cin = 1'b1;
#10; // Wait for a few simulation cycles
$display("Test case 3: A=1, B=0, Cin=1 => Sum=%b, Cout=%b", Sum, Cout);

// Test case 4: A=1, B=1, Cin=1


A = 1'b1;
B = 1'b1;
Cin = 1'b1;
#10; // Wait for a few simulation cycles
$display("Test case 4: A=1, B=1, Cin=1 => Sum=%b, Cout=%b", Sum, Cout);

$finish; // End the simulation


end

endmodule
///////////////////////////////
module FourBitAdder_TB;

// Inputs
reg [3:0] A;
reg [3:0] B;
reg Cin;

// Outputs
wire [3:0] Sum;
wire Cout;

// Instantiate the FourBitAdder module


FourBitAdder UUT (
.A(A),
.B(B),
.Cin(Cin),
.Sum(Sum),
.Cout(Cout)
);

// Stimulus generation
initial begin
// Test case 1: A=5 (0101), B=3 (0011), Cin=0
A = 4'b0101;
B = 4'b0011;
Cin = 1'b0;
#10; // Wait for a few simulation cycles
$display("Test case 1: A=5, B=3, Cin=0 => Sum=%b, Cout=%b", Sum, Cout);

// Add more test cases here if needed

$finish; // End the simulation


end

endmodule
/////////////////////////////////
module EightBitAdder_TB;

// Inputs
reg [7:0] A;
reg [7:0] B;
reg Cin;

// Outputs
wire [7:0] Sum;
wire Cout;

// Instantiate the EightBitAdder module


EightBitAdder UUT (
.A(A),
.B(B),
.Cin(Cin),
.Sum(Sum),
.Cout(Cout)
);

// Stimulus generation
initial begin
// Test case 1: A=74 (01001010), B=55 (00110111), Cin=0
A = 8'b01001010;
B = 8'b00110111;
Cin = 1'b0;
#10; // Wait for a few simulation cycles
$display("Test case 1: A=74, B=55, Cin=0 => Sum=%b, Cout=%b", Sum, Cout);

// Test case 2: A=255 (11111111), B=1 (00000001), Cin=0


A = 8'b11111111;
B = 8'b00000001;
Cin = 1'b0;
#10; // Wait for a few simulation cycles
$display("Test case 2: A=255, B=1, Cin=0 => Sum=%b, Cout=%b", Sum, Cout);

// Test case 3: A=128 (10000000), B=128 (10000000), Cin=1


A = 8'b10000000;
B = 8'b10000000;
Cin = 1'b1;
#10; // Wait for a few simulation cycles
$display("Test case 3: A=128, B=128, Cin=1 => Sum=%b, Cout=%b", Sum, Cout);

// Add more test cases here if needed

$finish; // End the simulation


end

endmodule
Result
Half adder
Full adder

4 bit adder

8 bit adder
Part B
Simulation of 8:1 MUX
Code
module MUX8to1 (
input [7:0] i,
input s2, s1, s0,
output reg out
);

always @ (i or s2 or s1 or s0)
case ({s2, s1, s0})
3'b000: out = i[0];
3'b001: out = i[1];
3'b010: out = i[2];
3'b011: out = i[3];
3'b100: out = i[4];
3'b101: out = i[5];
3'b110: out = i[6];
3'b111: out = i[7];
default: out = 1'bx;
endcase

endmodule
/////////////////////////////////
module MUX8to1_TB;

// Inputs
reg [7:0] i;
reg s2, s1, s0;
// Output
wire out;

// Instantiate the MUX8to1 module


MUX8to1 UUT (
.i(i),
.s2(s2),
.s1(s1),
.s0(s0),
.out(out)
);

// Initialize Inputs
initial begin
i = 8'b10101010;
s2 = 0;
s1 = 0;
s0 = 0;
#100; // Wait 100 ns for global reset to finish

// Add stimulus here


#100; s2 = 0; s1 = 0; s0 = 1;
#100; s2 = 0; s1 = 1; s0 = 0;
#100; s2 = 0; s1 = 1; s0 = 1;
#100; s2 = 1; s1 = 0; s0 = 0;
#100; s2 = 1; s1 = 0; s0 = 1;
#100; s2 = 1; s1 = 1; s0 = 0;
#100; s2 = 1; s1 = 1; s0 = 1;
end

// Display output
initial begin
#100;
$monitor("i=%b, s2=%b, s1=%b, s0=%b, out=%b", i, s2, s1, s0, out);
$finish;
end

endmodule
Results

You might also like