Citroen Berlingo Handbook

HANDBOOK
https://www.automotive-manuals.net/
Access to the Handbook
The Handbook is available on the CITROËN website, in
the "MyCitroën" section or at the following address:
http://service.citroen.com/ddb/
Select:
From the appropriate Store, download the Scan MyCitroën - the language,
application for smartphone. - the vehicle, its body style,
- the print edition of your handbook appropriate for the date of 1st
registration of your vehicle.
Then select:
- the vehicle,
- the print edition appropriate for the date of 1st registration of your Direct access to the Handbook.
vehicle.
Download the content for the vehicle's Handbook.
This symbol indicates the latest information

available.
Key
Welcome
Thank you for choosing a Citroën Berlingo. Safety warning
This document presents the information and recommendations required

Additional information
for you to be able to explore your vehicle for safe operation.
Your vehicle will be fitted with only some of the equipment described in Contributes to the protection of the environment
this document, depending on its trim level, version and the specification
for the country in which it was sold.
Left-hand drive vehicle
The descriptions and illustrations are given as indications only.
Automobiles CITROËN reserves the right to modify the technical
Right-hand drive vehicle
specifications, equipment and accessories without having to update this
edition of the handbook.
If ownership of your vehicle is transferred, please ensure this Complete Key

Handbook is passed on to the new owner. This allows you to identify the special features of your vehicle:
In this document you will find all of the instructions and Berlingo Multispace passenger vehicle only
recommendations on use that will allow you to enjoy your vehicle to the
fullest. It is strongly recommended that you familiarise yourself with it as
well as the Warranty and Maintenance Guide which will provide you with
information about the warranties, servicing and roadside assistance Berlingo commercial vehicle only
associated with your vehicle.
Contents
Overview . Ease of use and comfort Lighting and visibility

Steering wheel adjustment 37 Lighting control 71
Mirrors 37 Automatic illumination of headlamps 72
Eco-driving . Surveillance mirror

Front seats
38
38
LED daytime running lamps
Guide-me-home lighting
72
72
Individual passenger seat 40 Cornering lighting 73
Extenso cab 40 Direction indicators 73
Rear bench seat 42 Headlamp beam 73
Instruments
Rear seats (5 seats) 43 Wiper control stalk 73
Instrument panel 7 Rear seats (7 seats) 46
Warning and indicator lamps 8 Crew cab 50
Indicators 18 Modularity 52
Lighting dimmer 22 Front fittings 54
Trip computer 22 Seating area fittings 55
Date and time setting 23 Modutop 56 Safety
Fragrance diffuser 57 General safety recommendations 76
Courtesy lamps 59 Hazard warning lamps 77
Rear fittings (5 seats) 60 Horn 77
Rear fittings (7 seats) 61 Emergency or assistance call 77
Access
Load space layout 64 ABS 79
Key 25 Heating/Manual air conditioning 66 EBA 79
Remote control 25 Dual-zone automatic air conditioning 67 ASR and ESC 79
Front doors 28 Demisting and defrosting 70 Grip control 80
Sliding side door(s) 28 Seat belts 82
Operation in the event of a battery failure 29 Airbags 85
Tailgate 29 Child seats 89
Side-hinged rear doors 30 Deactivating the passenger's front airbag 90
Rear roof flap 32 ISOFIX mountings 98
Central locking 33 Child lock 102
Alarm 34
Electric windows 35
2 https://www.automotive-manuals.net/
Contents .
Driving Practical information Technical data
Driving recommendations 103 Fuel 126 General points 161
Starting and stopping 104 Fuel system cut-off 127 Petrol engines/weights 162
Electronic engine immobiliser 105 Compatibility of fuels 128 Diesel engines/weights 163
Parking brake 105 Snow chains 129 Dimensions 165
Manual gearbox 105 Removable snow shield 130 Identification markings 174
6-speed electronic gearbox 106 Changing a wiper blade 130
Gear shift indicator 108 Towing device 131
Stop & Start 108 Towbar with a swan neck towball 131
Hill start assist 111 Roof bars 133
.
Under-inflation detection 112 Modutop roof bars 133
Tyre under-inflation detection with Other accessories 134 Audio equipment and telematics
reinitialisation 113 Bonnet 135 7-inch touch screen tablet
Speed limiter 115 Engines 136 Audio system
Cruise control 117 Checking levels 136
Active City Brake 120 Checks 138
Parking sensors 122 AdBlue ® (BlueHDi engines) 140
Reversing camera 124
Alphabetical index .
In the event of a breakdown
Puncture repair kit 143
Changing a wheel 143
Fitting the wheel trim on the rim 147
Changing a bulb 149
Changing a fuse 154
Battery 158
Economy mode 159
Towing your vehicle 159
Running out of fuel (diesel) 160
https://www.automotive-manuals.net/ 3
Overview
1. Lighting and direction indicator control

Instruments and controls stalk.
2. Instrument panel with display.
3. Wiper/screenwash/trip computer control
stalk.
4. Ignition.
5. Audio system controls.
6. Driver's front airbag/horn.
7. Steering wheel height and reach
adjustment.
8. Cruise control/speed limiter controls.
9. Control plate: parking assist, headlamp
beam adjustment, ESC, Stop & Start,
alarm (depending on country of sale).
10. Bonnet release.
11. Electric door mirror adjustment controls.
12. Front window controls.
13. Switch panel: hazard warning lamps,
central locking, child lock (depending
on version).
14. Cigarette lighter.
15. Heating/ventilation controls.
16. Electronic gearbox or Grip control control.
17. Touch screen tablet.
18. USB port (with electronic gearbox).
19. USB port (with manual gearbox).
Eco-driving .
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your Drive smoothly

gearbox
Maintain a safe distance between vehicles, Unless it has automatic regulation, switch off
With a manual gearbox, move off gently and use engine braking rather than the brake the air conditioning as soon as the desired
change up without waiting. While accelerating, pedal and press the accelerator gradually. temperature has been reached.
change up early. These practices contribute towards a Switch off the demisting and defrosting controls,
reduction in fuel consumption and CO2 if these are not automatically managed.
With an automatic gearbox, give preference emissions and also help to reduce the Switch off the heated seat as soon as possible.
to automatic mode and avoid pressing the background traffic noise.
accelerator pedal heavily or suddenly. Switch off the headlamps and foglamps when
If your vehicle has cruise control, make use of there is sufficient visibility without them.
The gear shift indicator invites you to engage the system at speeds above 25 mph (40 km/h)
the most suitable gear: as soon as the when the traffic is flowing well. Avoid running the engine before moving off,
indication is displayed in the instrument panel, particularly in winter; your vehicle will warm up
follow it straight away. much faster while driving.
For vehicles fitted with an automatic gearbox, Control the use of your electrical
this indicator appears only in manual mode. equipment As a passenger, if you avoid connecting your
multimedia devices (film, music, video game,
Before moving off, if the passenger etc.), you will contribute towards limiting
compartment is too warm, ventilate it by opening the consumption of electrical energy and
the windows and air vents before using the air therefore of fuel.
conditioning. Disconnect your portable devices before
Above 30 mph (50 km/h), close the windows and leaving the vehicle.
open the air vents.
Consider using equipment that can help keep
the temperature in the passenger compartment
down (sunroof blind and window blinds, etc.).
Eco-driving
Limit the causes of excess Observe the recommendations

consumption on maintenance
Spread loads throughout the vehicle; place Check the tyre pressures regularly, when cold, Have your vehicle serviced regularly (engine
the heaviest items in the bottom of the boot, referring to the label in the door aperture, oil, oil filter, air filter, passenger compartment
as close as possible to the rear seats. driver's side. filter, etc.) and observe the schedule of
Limit the loads carried in the vehicle and Carry out this check in particular: operations in the manufacturer's service
reduce wind resistance (roof bars, roof rack, - before a long journey, schedule.
bicycle carrier, trailer, etc.). Preferably use a - at each change of season,
roof box. - after a long period out of use. With a BlueHDi diesel engine, if the SCR
Remove roof bars and the roof rack after use. Don't forget the spare wheel and the tyres on system is faulty, your vehicle becomes
any trailer or caravan. polluting. Visit a CITROËN dealer or a
At the end of winter, remove snow tyres and qualified workshop as soon as possible to
refit your summer tyres. bring your vehicle’s nitrogen oxide emissions
back in line with the regulations.
When filling the tank, do not continue after the

3rd cut-off of the nozzle to avoid overflow.
At the wheel of your new vehicle, it is only

after the first 1,900 miles (3,000 kilometres)
that you will see the fuel consumption settle
down to a consistent average.
Instruments
Instrument panel Displays

Level 1
Screens
1
The format of the information presented in the

Level 2 with the touch screen tablet screen depends on the vehicle's equipment
level.
Dials
1. Distance recorder in kilometres/miles.
2. Display screen.
3. Fuel gauge, coolant temperature gauge.
4. Rev counter.
5. Trip distance recorder/service indicator
reset.
6. Instrument panel lighting dimmer.
Instruments
Warning and indicator lamps Warning lamps Operation indicator lamps

Visual indicators informing the driver that When the engine is running or the vehicle is If one of the following indicator lamps comes on
a system is in operation, switched off (on/ being driven, illumination of one of the following in the instrument panel and/or instrument panel
off indicator lamps) or has developed a fault warning lamps indicates a fault which requires screen, this confirms that the corresponding
(warning lamps). action on the part of the driver. system has come into operation.
Any fault resulting in the illumination of a
warning lamp must be investigated further
When the ignition is switched on using the associated message.
Certain warning lamps come on for a few seconds If you encounter any problems, contact a
when the vehicle's ignition is switched on. CITROËN dealer or a qualified workshop.
When the engine is started, these same warning
lamps should go off.
If they remain on, before driving refer to the
information on the warning lamp concerned. Deactivation indicator lamp
If this indicator lamp comes on, this confirms
that the corresponding system has been
Associated warnings switched off intentionally.
This may be accompanied by an audible signal
Certain warning lamps may come on in one of and a message being displayed.
two modes: fixed (continuous) or flashing.
Only by relating the type of lighting to the
operating status of the vehicle can it be
ascertained whether the situation is normal or
whether a fault has occurred.
In the event of a fault, the illumination of the
warning lamp may be accompanied by an
audible signal and/or a message.
Instruments
Warning/indicator lamp
Red warning lamps

State Cause Action/Observations
1
STOP On, associated with Major faults linked with the "Brake You must stop as soon as it is safe to do so.
another warning lamp fluid level", "Engine oil pressure Park, switch off the ignition and call a CITROËN
and accompanied and temperature", "Coolant dealer or qualified workshop.
by a message in the temperature", "Electronic brake
screen. force distribution" and "Power
steering" warning lamps.
Engine coolant On, with the needle in An abnormal increase in Park and switch off the ignition, then allow to cool down.
temperature and the red zone. temperature. Check the level visually.
level
Flashing. A drop in the engine coolant level. Contact a CITROËN dealer or a qualified workshop.
Engine oil pressure On while driving. Insufficient pressure or excessive Park and switch off the ignition then allow to cool down.
and temperature temperature. Check the level visually.
For more information on checking levels, refer to the corresponding section.
On, even though the A major fault. Have it checked by a CITROËN dealer or a qualified
level is correct. workshop.
Battery charge On. A fault in the charging circuit. Check the battery terminals.
For more information on the battery, refer to the corresponding section.
Flashing. Active functions set to standby For more information on the battery, refer to the
(economy mode). corresponding section.
On, despite the A fault with the ignition or Have it checked by a CITROËN dealer or a qualified
checks. injection system. workshop.
Instruments
Warning/indicator lamp State Cause Action/Observations
Seat belt not Fixed, then flashing. The driver and/or front passenger Pull the strap then insert the tongue in the buckle.
fastened has not fastened their seat belt.
Accompanied by an The vehicle is moving with the Check that the seat belt is fastened correctly by pulling
audible signal, then driver's and/or front passenger’s the strap.
fixed. seat belt unfastened.
Power steering On. The power steering has a fault. The vehicle retains conventional steering without
assistance.
Have it checked by a CITROËN dealer or a qualified
workshop.
Opening detection On, accompanied One of the vehicle access Check that all the vehicle access openings are
by a message in the openings is not properly closed. properly closed.
screen.
Parking brake On. The parking brake is applied or Release the parking brake to switch off the warning
not properly released. lamp, keeping your foot on the brake pedal.
Brake fluid level On. The fluid level is too low. Top up with a fluid approved by CITROËN.
Electronic brake On, even though There is a fault with the system. You must stop as soon as it is safe to do so.
force distribution the level is correct, Park and switch off the ignition.
associated with the Contact a CITROËN dealer or a qualified
+ ABS warning lamp. workshop.
Instruments
Orange warning lamps

State Cause Action/Observations
1
Service On temporarily. Minor faults or warnings. Refer to the alert log on the display or screen.
For more information on the trip computer, refer to
the corresponding section.
On. Major faults are present.
Contact a CITROËN dealer or a qualified workshop.
Emissions control Flashing or on. There is a fault with the system. There is a risk of damage to the catalytic converter.
system EOBD EOBD (European On Board Have it checked as soon as possible by a CITROËN
Diagnosis) is a diagnostics dealer or a qualified workshop.
system which complies with,
among others, the standards on
emissions limits of:
- CO (carbon monoxide),
- HC (unburnt hydrocarbons),
- NOx (nitrogen oxides),
detected by oxygen sensors
placed downstream of the
catalytic converters,
- particles.
Low fuel level On, with the needle of When it first comes on, around You must refuel as soon as possible to avoid running
the gauge in the red 8 litres of fuel remain in the tank, out. This warning lamp will come on every time the
zone. according to your driving style ignition is switched on, until sufficient fuel is added.
and your engine. Never continue to drive until you run out of fuel as
this could damage the emission control and injection
systems.
Flashing. The supply is cut off following a Re-establish the supply.

serious collision. For more information on fuel, refer to the
corresponding section.
Instruments
ABS On. The anti-lock braking system has The vehicle retains conventional braking capabilities.
a fault. Drive carefully at reduced speed and contact a
CITROËN dealer or a qualified workshop without
delay.
ESC Flashing. Triggering of the ASR or DSC The system optimises traction and allows improved
regulation. directional stability of the vehicle.
On. A fault with the ASR or DSC E.g. check the pressure of the tyres.
regulation. Have it checked by a CITROËN dealer or by a
E.g. under-inflation of the tyres. qualified workshop (wheel speed sensor, hydraulic
unit, etc.).
Under-inflation On. One or more wheels have Check the pressure of the tyres as soon as possible.
insufficient pressure. This check should preferably be carried out when the
tyres are cold.
Flashing then fixed, The tyre pressure monitoring Under-inflation detection is no longer assured.
accompanied by the system has a fault or no sensor Have the system checked by a CITROËN dealer or a
Service warning lamp, is detected on one of the wheels. qualified workshop.
+
and a message is
displayed, depending
on equipment fitted.
Front/lateral Flashing or fixed. A fault with an airbag. Have it checked by a CITROËN dealer or a qualified
airbag workshop.
For more information on the airbags, refer to the
Deactivation of the On. Voluntary deactivation of this For more information on the airbags, refer to the
passenger's front airbag when a rearward facing corresponding section.
airbag child seat is installed.
Instruments
Particle filter
State
On.
Cause
A malfunction of the particle filter

Action/Observations
Have the filter checked by a CITROËN dealer or a

1
(level of diesel additive, risk of qualified workshop.
blockage, etc.). For more information on Checking levels, refer to the
AdBlue ® On since switching The remaining driving range is As soon as possible, top up the AdBlue ®.
(BlueHDi Diesel) on the ignition, between 350 and 1,500 miles
accompanied by an (600 and 2,400 km).
audible signal and a
message indicating the
remaining driving range.
AdBlue ® Flashing, associated The remaining driving range is You must top up the AdBlue ® to avoid a breakdown.
(BlueHDi Diesel) with the Service between 0 and 370 miles (0 and
warning lamp, 600 km).
+
accompanied by an
message indicating
the remaining driving
range.
Flashing, associated The AdBlue ® tank is empty: To be able to restart the engine, you must top up the
with the Service the starting inhibition system AdBlue ®.
warning lamp, required by regulations prevents It is essential to add at least 5 litres of AdBlue ® to the
accompanied by an starting of the engine. corresponding tank.
message indicating
that starting is
prevented.
For topping-up or for more information on AdBlue ®, refer to the corresponding section.
Instruments
SCR emissions On, since switching A temporary fault with the SCR This alert disappears once the exhaust emissions
control system on the ignition, emissions control system has return to normal levels.
(BlueHDi Diesel) associated with the been detected.
+
Service and engine
diagnostic warning
lamps, accompanied
by an audible signal
+
and a message.
Flashing, since After 30 miles (50 km) travelled To avoid a breakdown, contact a CITROËN dealer or
switching on the with this alert, the fault in the a qualified workshop without delay.
ignition, associated emissions control system is
with the Service and confirmed. You can continue
engine diagnostic driving for up to 650 miles
warning lamps, (1,100 km) before the engine
accompanied by an starting inhibition system is
audible signal and a triggered.
message indicating
the remaining driving
range.
Flashing, since You have exceeded the To be able to restart the engine, you must call on a
switching on the authorised driving limit following CITROËN dealer or a qualified workshop.
ignition, associated with confirmation of a fault with the
the Service and engine emissions control system: the
diagnostic warning engine starting inhibition system
lamps, accompanied by prevents starting of the engine.
an audible signal and a
message indicating the
prevention of starting of
the engine.
Instruments
Rear foglamps
State
On.
Cause
A manual selection.
Action/Observations
The lamps only operate when the sidelamps or dipped

1
beam headlamps are on.
In normal visibility, please switch them off to avoid
being booked.
This lamp is dazzling red.
Green indicator lamps

ECO On. When the vehicle stops (red The indicator lamp goes off and the engine restarts
lights, stop sign, traffic jams, etc.) automatically in START mode, as soon as you want to
the Stop & Start puts the engine move off.
into STOP mode.
Flashes for a few STOP mode is temporarily For more information on Stop & Start, refer to the
seconds, then goes unavailable. corresponding section.
off. or
START mode is triggered
automatically.
Left-hand direction Flashing with buzzer. A change of direction signalled Move the stalk down.
indicator using the lighting control stalk.
Right-hand Flashing with buzzer. A change of direction signalled Move the stalk up.
direction indicator using the lighting control stalk.
Front foglamps On. A manual selection. The lamps only operate when the sidelamps or dipped
beam headlamps are on.
Instruments
Warning/indicator lamp State Indicates Action/Observations
Dipped beam On. A manual selection or automatic Rotate the lighting control stalk ring to the second
headlamps/daytime illumination. position.
running lamps
Activation of the dipped beam

headlamps from ignition:
daytime running lamps
(depending on country of sale).
Blue warning/indicator lamps

Main beam On. The lighting control stalk has Pull the stalk to return to dipped beam headlamps.
headlamps been pulled towards you.
Indicator lamp in the display

State Indicates Action/Observations
screen
Cruise control On. Cruise control is selected. Manual selection.
For more information on the Cruise control, refer to
Speed limiter On. The limiter is selected. Manual selection.

For more information on the Speed limiter, refer to
Gear shift On. A recommendation which does To reduce fuel consumption with a manual gearbox,
indicator not take into account the road engage the appropriate gear. The driver remains
configuration and the traffic responsible for deciding whether or not to follow this
density. advice.
Instruments
Warning/indicator lamp in
the display screen
Diesel pre-heater
State
On.
Indicates
The climatic conditions mean that

Action/Observation
Wait until the indicator lamp goes off before starting

1
pre-heating is necessary. the engine.
Water in diesel On, accompanied The diesel filter contains water. Have the filter purged immediately by a CITROËN
fuel filter by a message in the dealer or a qualified workshop.
screen. For more information on the checks and in particular
on purging the water from the diesel filter, refer to the
Depending on country of sale.
Service spanner On. A service will soon be due. Refer to the list of checks in the Maintenance and
Warranty Guide.
Have the vehicle serviced by a CITROËN dealer or a
qualified workshop.
Time Flashing. Setting the time. Use the left-hand button of the instrument panel.
For more information on Date and time setting, refer
to the corresponding section.
Instruments
More than 1,000 miles/km remain resumes its normal operation. The spanner
Indicators before the next service is due symbol remains on as a reminder that a service
Service indicator Example: there are 4,800 miles/km remaining
is required soon.
before the next service is due. For a few

This adjusts the service interval based on the
seconds after the ignition is switched on, the Service overdue
vehicle usage.
screen indicates:
Each time the ignition is
switched on and for a few
Operation seconds, the spanner symbol
For a few seconds after the ignition is switched flashes and the excess
on, the spanner indicating a service operation distance travelled is displayed.
comes on. The distance recorder display line With the engine running, the spanner symbol
indicates the distance remaining before the remains on until the service has been performed.
next service is due (rounded up by default). A few seconds after the ignition is switched
For BlueHDi Diesel versions, this alert is also
The service due dates are calculated from the on, the oil level is displayed, depending on
accompanied by the continuous illumination of
last reset of the service indicator. the version, and then the distance recorder
the Service warning lamp when the ignition is
The due date is determined based on two resumes its normal operation, indicating the
switched on.
parameters: total and trip distances.
- the total distance travelled, For BlueHDi Diesel versions, the spanner
- the time since the last service. Less than 1,000 miles/km remain can also come on early, according to the
before the next service is due degree of deterioration of the engine oil.
The degree of deterioration of the engine
Each time the ignition is switched on and for a
oil depends on the driving conditions in
few seconds, the spanner symbol flashes and
which the vehicle is used.
The distance remaining may be weighted the distance remaining is displayed:
by the time factor, depending on the type
of driving. Zero reset
Your CITROËN dealer or a qualified workshop
will perform this operation after each service.
If you carry out the servicing of your vehicle
A few seconds after the ignition is switched yourself, the reset procedure is as follows:
on, the oil level is displayed, depending on F switch off the ignition,
the version, and then the distance recorder
Instruments
F Press the trip distance recorder reset button

and keep it pressed,
F switch on the ignition.
The distance recorder display begins a
Low oil level Trip recorder reset
button 1
countdown. F With the ignition on, press
When the display indicates "=0", release the The flashing OIL together with the service the button until zeros
button; the spanner disappears. indicator lamp, accompanied by an audible appear.
signal and a message on the screen, indicates
a low oil level which could damage the engine.
Following this operation, if you wish to If the low oil level is confirmed by checking the
disconnect the battery, lock the vehicle dipstick, the level must be topped up. Fuel gauge
and wait at least five minutes for the reset
to be taken into account.
Oil level gauge fault
Engine oil level indicator

The flashing OIL-- indicates a malfunction of
Depending on your vehicle’s engine, when the
the engine oil level gauge. Contact a CITROËN
ignition is switched on, the engine oil level is
dealer or a qualified workshop.
indicated for a few seconds after the service
information.
The level read will only be correct if the

vehicle is on level ground and the engine
Oil level correct has been stopped for more than thirty The fuel level is tested every time the ignition is
minutes. turned to the "on" position.
For more information on Checking the The gauge is positioned on:
levels and, in particular, the oil level, refer - 1: the tank is full, about 60 litres.
to the corresponding section. - 0: the use of the reserve is started, the
warning lamp lights up permanently. When
the warning lamp comes on, the reserve is
approximately 8 litres.
Instruments
For more information on Fuel, refer to the

What to do if the warning lamp lights up: AdBlue® fluid range
F stop immediately, switch off the ignition. The
fan may continue to operate for a certain
indicators
time up to approximately ten minutes, Alert settings and display
F wait for the engine to cool down in order
to check the coolant level and top it up if Different levels of alert are triggered according
Coolant temperature necessary. to the remaining driving range threshold.
Since the cooling system is under pressure, You will be informed as each mileage threshold
follow these instructions to avoid any risk of is reached and the alerts will change from
burns: temporary to permanent.
F wait at least one hour after the engine stops - The 1st alert is triggered at a remaining
to intervene, driving range of 1,500 miles (2,400 km).
F unscrew the cap by 1/4 of a turn to allow the - The 2nd alert is triggered at a remaining
pressure to drop, driving range of 350 miles (600 km).
F when the pressure has dropped, check the Up to 0 km, at which point it will be impossible
level in the expansion bottle, to restart the engine after a stop.
F if necessary, remove the cap to top up.
If the needle remains in the red zone, have it Driving range
checked by a CITROËN dealer or by a qualified F Press this button to display
workshop. the information.
The needle is positioned before the red With the touch screen tablet:
zone: normal operation. F select the "Driving assistance"
For more information on Levels, refer to
In arduous conditions of use or hot climatic menu,
conditions, the needle may move close to the
red graduations. F select "Diagnostic",
What to do if the needle goes into the red F select CHECK.

zone:
F Slow down the vehicle or let the engine idle. Above 3,000 miles (5,000 km), the value is not
defined.
Instruments
In the event of the risk of non-

starting related to a lack of
AdBlue®
For more information on AdBlue ®
(BlueHDi engines), and, in particular,
on topping up the AdBlue ®, refer to the
Starting prevented, breakdown related to a
lack of AdBlue ®
The 0 fluid level is reached.

1
corresponding section. Your vehicle's exhaust emissions no longer
The engine starting inhibition system
required by regulations is activated meet the Euro 6 regulations and the engine will
automatically once the AdBlue ® tank is not start.
Range less than 350 miles (600 km)
empty.
To be able to start the engine, you must
Range greater than 1,500 miles (2,400 km) add at least 5 litres of AdBlue ®. You can
When switching on the ignition, there is no also call a CITROËN dealer or a qualified
automatic display of range in the instrument workshop for the top up required.
When switching on the ignition, this warning
panel. lamp flashes and the service warning lamp
comes on, accompanied by an audible signal
Remaining range between 1,500 and and the temporary display of a message in the
350 miles (2,400 and 600 km) instrument panel indicating the remaining range For more information on AdBlue ®
expressed in miles or kilometres before engine (BlueHDi engines) and, in particular
starting is prevented. topping up, refer to the corresponding
When driving, this message is displayed every section.
30 seconds until the AdBlue level has been
When switching on the ignition, this warning topped up.
lamp comes on, accompanied by an audible The remaining range is updated at every
signal and the display of a message, indicating 30 miles (50 km) travelled. In the event of a fault with the
the remaining range expressed in miles or It is essential to top up as soon as possible and SCR emissions control system
kilometres before engine starting is prevented. before the tank is completely empty; otherwise
it will not be possible to restart the engine after A system that prevents engine starting is
the next stop. activated automatically from 650 miles
When driving, this message is displayed every (1,100 km) after confirmation of a fault with
186 miles (300 km) until the fluid level has been the SCR emissions control system.
For more information on AdBlue ®
topped up. Have the system checked by a CITROËN
(BlueHDi engines), and in particular on
The reserve level has been reached; it is dealer or a qualified workshop as soon as
topping up, refer to the corresponding
recommended that you top up as soon as possible.
section.
possible.
Instruments
In the event of the detection of a fault If a fault with the SCR system is confirmed (after
You have exceeded the authorised driving
30 miles (50 km) covered with the permanent
limit: the starting inhibition system does
display of the message signalling a fault), these
not allow the engine to be started.
warning lamps come on and the UREA warning
lamp flashes, accompanied by an audible
signal and the display of a message indicating To be able to restart the engine, you must call
the remaining range expressed in miles or on a CITROËN dealer or a qualified workshop.
kilometres.
These warning lamps come on, accompanied

by an audible signal and the display of the
While driving, the message is displayed every
30 seconds while the fault with the SCR
Lighting dimmer
"Emissions fault" message. emission control system persists. F With the lights on, press
The alert is triggered while driving as soon The alert is repeated when switching on the the button to adjust
as the fault is detected for the first time, then ignition. the brightness of the
when switching on the ignition for subsequent You should go to a CITROËN dealer or a instruments and controls.
journeys, while the fault persists. qualified workshop as soon as possible. When the lighting reaches
Otherwise you will not be able to restart the the minimum (or maximum)
vehicle. setting, release this
button, then press again to
If it is a temporary fault, the alert Starting prevented
increase (decrease) it.
disappears during the next journey,
after self-diagnostic checks of the SCR
emissions control system.
Release the button when the desired level is
reached.
During the permitted driving phase (between Trip computer

650 and 0 miles (1,100 km and 0 km))
Each time the ignition is switched on, these
warning lamps come on and the UREA
warning lamp flashes, accompanied by an
audible signal and the display of the message
"Emissions fault: Starting prevented".
Instruments
Each press of the button on the end of the

windscreen wiper stalk allows you to scroll
through the various trip computer information
displays, depending on the screen.
When the range falls below 19 miles (30 km),
dashes are displayed. After filling with at least
10 litres of fuel, the range is recalculated and is
displayed if it exceeds 62 miles (100 km).
Date and time setting
Centre console without
1
screen
The "vehicle" tab with the range, current fuel
If dashes instead of figures continue to
consumption and remaining distance to travel.
be displayed when driving, contact a
CITROËN dealer.
The "1" tab (trip 1) with the average speed,
average fuel consumption and distance Current fuel consumption: calculated
travelled in trip 1. and displayed only when exceeding 19 mph To adjust the time on the clock, use the left-
The "2" tab (trip 2) with the same information (30 km/h). hand button on the instrument panel.
for a 2 nd trip. Average consumption: this is the average
fuel consumption since the last trip computer F Turn to the left: the minutes flash.
zero reset. F Turn to the right to increase the minutes
Zero reset Distance travelled: calculated from the last (hold the button towards the right to scroll
F When the desired trip is displayed, press trip computer zero reset. through faster).
the control for more than two seconds. Remaining distance: calculated according F Turn to the left: the hours flash.
to the final destination entered by the user. If F Turn to the right to increase the hours (hold
navigation is activated, the navigation system the button towards the right to scroll through
faster).
A few definitions calculates it instantaneously.
F Turn to the left: 24H or 12H is displayed.
Average speed: this is the average speed
Range: displays the distance that can still be calculated since the last trip computer zero F Turn to the right to select 24H or 12H.
travelled with the fuel detected in the tank on reset (with the ignition on). F Turn to the left to finish setting the time.
the basis of the average consumption over the The usual screen displays again when the
last few miles (kilometres) travelled. button hasn't been pressed for approximately
30 seconds.
This displayed value can vary greatly

following a change in the vehicle's driving
conditions or the terrain.
Instruments
Centre console with screen F With the arrows, select the function F In the secondary page, press
PERSONALISATION CONFIGURATION. "Time/Date".
F Press the OK button to confirm the
selection.
F With the arrows, select the function
DISPLAY CONFIGURATION.
selection.
F With the arrows, select the function
ADJUST DATE AND TIME.
selection.
F Adjust the settings one by one, confirming
The time-display sequence is dependent with the OK button.
on the model (version). Access to the "date" F Then select the OK tab on the screen and F Select "Adjust time" or "Adjust date"
adjustment is only active if the model version confirm it. and modify the settings using the numeric
offers a date in full text. keypad, then confirm.
Touch screen tablet

Screen C
F Press the MENU button.
F Press "Confirm" to quit.
F Select the "Configuration"

menu.
Access
Key Unlocking the cab or

vehicle
An initial press on this button unlocks

the front doors.
2
A second press on this button
unlocks all the vehicle's doors.
The direction indicators flash two times.
If you do not press the button, there is a risk of
damaging the key's mechanism.
This locks and unlocks the vehicle's doors, Take care not to allow the remote control
opens and closes the fuel filler cap, as well as to come into contact with grease, dust,
starting and stopping the engine. rain or a humid environment. Unlocking the load space
A heavy object attached to the key (key
ring, etc.) could weigh down on the shaft
of the key in the ignition switch, which may
Remote control cause a malfunction.
Unfolding/folding Pressing this button unlocks all of the
rear doors.
Unlocking
Operating security
Pressing this button unlocks all of
your vehicle's doors.
To unlock the load space only:
The direction indicators flash two times.
Access
F Press this button to lock the If deadlocking is activated from inside the
Only use identical batteries or batteries of
vehicle fully. vehicle using the remote control, it will change
an equivalent type to those recommended
to normal locking when the vehicle is started.
by CITROËN dealers.
F Press this button to unlock the Do not discard the remote control
load space. Only the front doors batteries, as they contain metals which
remain locked. Changing the battery are harmful to the environment.
Deposit them at a CITROËN dealership or
any other approved collection point.
Locking
Pressing this button locks all of your
vehicle's doors.
Reinitialising the remote
control
Following changing of the remote control
The direction indicators flash once.
battery or disconnection of the vehicle battery,
If one of the doors is open (transporting long
you may have to reinitialise the remote control.
loads) or not properly closed, the central
locking does not work. Battery type: CR1620/3 volts. F Wait at least one minute before using the
remote control.
Deadlocking The "battery flat" information is given by an
audible signal, accompanied by a message on
A second press on the closed padlock on the
the screen.
remote control within five seconds of locking
To replace the battery, unclip the casing using
the doors changes the locking to deadlocking.
a coin at the ring.
This is confirmed by fixed lighting of the
If the remote control does not work after the
direction indicators for approximately two
battery has been changed, reinitialise the
seconds.
remote control.
Deadlocking renders the exterior and interior
There is a risk of damage if the replacement
door handles inoperative. Therefore, never
battery is not of the correct type.
leave anyone inside the vehicle when it is
deadlocked.
Access
F Insert the key into the ignition switch with

Lost keys, remote control Anti-theft protection
the remote control buttons (padlocks) facing
Go to a CITROËN dealer, taking with you the Do not make any modifications to the electronic
you.
2
vehicle's registration certificate, your personal engine immobiliser system; this could cause
F Switch on the ignition.
identification documents and if possible, the label malfunctions.
F Within ten seconds, press the locking
bearing the key code. For vehicles with an ignition switch, do not forget
padlock for at least five seconds.
The CITROËN dealer will be able to retrieve the to remove the key and turn the steering to engage
F Switch off the ignition.
key code and the transponder code required to the steering lock.
F Wait at least one minute before using the
order a new key.
remote control.
The remote control is now working again. When purchasing a second-hand vehicle
Remote control Have the key codes memorised by a CITROËN
The high frequency remote control is a sensitive dealer, to ensure that the keys in your possession
system; do not operate it while it is in your pocket are the only ones which can start the vehicle.
as there is a possibility that it may unlock the
vehicle, without you being aware of it.
Do not repeatedly press the buttons of your
remote control out of range and out of sight of
your vehicle. You may stop it from working and
the remote control would have to be reinitialised.
The remote control does not operate when the
key is in the ignition, even when the ignition is
switched off.
Locking the vehicle

Driving with the doors locked may make access
to the passenger compartment by the emergency
services more difficult in an emergency.
As a safety precaution (with children on board),
remove the key from the ignition or take the
electronic key when you leave the vehicle, even
for a short time.
Access
Front doors Sliding side door(s) From outside

From outside F Pull the handle towards you, then
backwards and open the side door, guiding
it as it slides backwards until it passes the
point of resistance and it stays open.
A mechanical system prevents the

left side door being opened when
the fuel filler flap is open.
F Use the remote control to lock/unlock the

vehicle. From inside
F If the remote control does not work, insert F Unlock and open the side door using this
the metal part of the key into the driver's handle, guiding it to the rear until it reaches
door lock. the point of resistance. Pass this point to
keep the door open.
From inside
Close the side door again using
the handle to start sliding and
pass the point of resistance. Then
use the shaped recess at the top
of the door pillar to guide the door
until it locks.
Do not use the grab handle to
slide the door.
F Use the door opening control to unlock and

open the respective door.
Access
Operation in the event of Tailgate

a battery failure Opening
Front and side passenger
doors
From outside
The tailgate is locked and unlocked with the
remote control.
2
Take care not to block the guide space

on the floor to allow the door to slide
correctly.
If your vehicle is parked on an incline,
In the event of a battery or central locking fault,
guide the sliding motion of the side door.
use the lock to lock the doors mechanically.
The door could open or close more quickly
F To open the door and get out of the vehicle,
because of the sloping ground and pose a
pull the interior handle.
risk of injuries.
F To lock the door, insert the key in the lock F To open it, press the control under the trim,
As a safety measure and for functional
on the edge of the door and turn it by one then lift the tailgate.
reasons, do not drive with the sliding side
eighth of a turn. Use an interior grab handle to close the tailgate
doors open.
when it is in the raised position.
F Guide the tailgate as it closes until it is at
the balance point of its travel, then apply a
Driver's door final push so that it closes completely.
F Insert the key in the lock and turn it to the
right to lock or to the left to unlock.
Access
From inside Opening Side-hinged rear doors

(emergency control)
In the event of a central locking operating fault,
this allows you to unlock the tailgate from the
inside.
F After unlocking the vehicle with the remote

control or the key, press the control and lift
the rear screen to open it.
F Insert a small screwdriver into the opening

between the tailgate and the floor. To unlock Closing
the lock, move the catch to the left and then F Close the rear screen by pressing in
push the tailgate. the centre of the glass until it is closed
completely.
Rear screen in the tailgate
The opening rear screen allows
you to access the rear of the The tailgate and the rear screen cannot be
vehicle directly, without having to opened simultaneously, to avoid damaging
The side-hinged rear doors are asymmetrical
open the tailgate. the glass and the opening itself.
(2/3-1/3), with the small side on the right.
They are fitted with a central lock.
Access
From outside With the rear roof flap, the rear bumper It is possible to drive with the right-hand
is reinforced to serve as a step to get into door open to make it easier to transport
F To open, pull the handle towards you.
2
the vehicle. long loads. The left-hand door is kept
closed by the distinctive "yellow" lock,
positioned at the base of the door. This
closed door must not be used to restrain
the load.
When a trailer is attached to the towing Driving with the right-hand door open is a
ball, opening of the hinged rear doors special dispensation. Please comply with
could be obstructed. You will need to the usual safety instructions on how to
detach the trailer. warn other drivers.
Opening to approximately 180°

A check strap system allows the doors to be
opened from about 90° to about 180°.
F Pull the yellow control when the door is

open.
F Pull the lever to open the right-hand door. The check strap will engage again
F To close, start with the right-hand door then automatically on closing.
close the left-hand door.
Access
To open the rear roof flap:

When parked with the rear
F lift the black paddle of the toggle,
doors open to 90°, the doors
F relax the toggle by pressing on the rear roof
conceal the rear lamps. To
flap (downwards) then release the hook,
signal your position to other
F lift the rear roof flap,
road users driving in the
F move past the point of resistance to lock the
same direction who may
rear roof flap with the support props.
not have seen your vehicle,
use a warning triangle or
other device required by the
legislation in your country.
Never drive without the props in place.
F When present on the vehicle, pulling this To close the rear roof flap:
handle towards you opens the left-hand F check that the support bar is properly
From inside door. secured,
F lower the rear roof flap,
Rear roof flap F while pressing on the rear roof flap

(downwards), take the two spring rings and
This roof flap at the rear is compatible only with then place the hook in its housing,
side-hinged doors. F lower the black plate to lock the rear roof
flap.
Locking the rear roof flap ensures tight contact
with the seal and guarantees sealing with no
noise.
Support bar
A support bar is available for transporting long
loads, after opening the rear roof flap.
Access
The control is not active when the vehicle has

Never drive without the support bar in
been locked using the remote control or the key
place.
from the outside.
2
The rear doors will only lock when the
The doors can still be opened from the inside.
support bar is installed.
When the rear roof flap is open, take care
when driving where height is restricted. The control switch LED:
F Fold back the support bar by lifting the lever. Never rest loads directly on the rear doors. - flashes when the doors are locked when
F Guide it to the door pillar. Comply with the usual indications for stationary with the engine off,
F Support the long loads to be transported, warning other drivers. - comes on when the doors are locked and
lift them and reposition the support bar with Reserve the use of the rear roof flap for the ignition is switched on.
one hand. short journeys.
F Ensure that it is secured correctly by Driving with the doors locked may make
pressing the handle downwards past the access to the passenger compartment by
the emergency services more difficult in
point of resistance and secure the loads an emergency.
firmly.
The side supports can be used as hooking
points. Load space
Central locking
Never attach any load to the rear roof flap.
The rear bumper has been reinforced to

serve as a step when entering the vehicle.
Press once to permit central locking of the

vehicle when all the doors are closed. Press to lock/unlock the rear doors
independently of the locking status of the cab.
Press again to permit central unlocking of the The doors can still be opened from the inside.
vehicle.
Access
Anti-intrusion protection Alarm Locking the vehicle with

exterior protection only
Locking while driving
If, while you are away from the vehicle, you
When the vehicle moves off, as soon as you
If fitted on your vehicle, this provides two types wish to leave a window partially open or a pet
reach approximately 6 mph (10 km/h), the
of protection: inside the vehicle, you should choose exterior
system locks the doors. The characteristic
- exterior protection: it sounds if a front/rear protection only.
central locking noise is heard. The LED in the
control switch on the dashboard central switch door or the bonnet is opened. F Switch off the ignition.
panel comes on. - interior protection: it sounds if the volume
During the journey, opening a door results in inside the passenger compartment changes
complete unlocking of the vehicle. (breaking of a window or a movement inside
the vehicle).
If your vehicle is fitted with a separation
Activation/deactivation of the partition, the interior protection is not active in
system the load space.
Locking the vehicle with

complete alarm F In the next ten seconds, press the button
until the red LED is on continuously.
Setting the alarm F Get out of the vehicle.
F Within the next five minutes, set the alarm
F Switch off the ignition and get out of the by locking or deadlocking using the remote
vehicle. control (the red LED flashes once per
F Set the alarm within five minutes after second).
getting out of the vehicle, by locking or
With the ignition on, press and hold this button deadlocking using the remote control. The
to activate or deactivate the function. red LED, located on the button, flashes Triggering
once per second.
If this warning lamp comes on, check The siren sounds, the direction indicators flash
that all of the doors on your vehicle Disarming for approximately 30 seconds and the red LED
are closed correctly. flashes rapidly.
F Unlock the vehicle with the remote control
F To switch it off, insert the key and switch on
or switch on the ignition, the red LED goes
the ignition.
off.
Access
When the alarm has been triggered ten times To prevent triggering of the alarm when a door
in succession (when triggered for the eleventh is opened, you must first press the unlocking
Electric windows
time) it is deactivated. Repeat the procedure for button on the remote control again.
2
setting the alarm.
Locking the vehicle without Do not make any modifications to the

alarm alarm system as this could cause faults.
F Insert the key in the driver's door lock and

lock it.
Do not set the alarm when washing your Manual mode
vehicle.
Windows, rear Press or pull the control gently, without going
past the point of resistance. The window stops
Failure of the remote control as soon as the control is released.
When the alarm is set but the remote control
does not operate:
F Unlock the doors with the key and open the
Automatic mode
door. The alarm is triggered. This operating mode is available on the
F Switch on the ignition within ten seconds. driver's side, depending on the version.
The alarm is disarmed.
This operating mode is available on
Malfunction the driver's side and on the passenger
When the ignition is switched on, if the red LED side.
remains on for ten seconds there is a fault in
Press or pull the control beyond the point
the siren connection.
of resistance. The window opens or closes
Contact a CITROËN dealer to have the system F To open the rear windows, tilt the lever, then
fully when the control is released. Pressing
checked. push it all the way to lock the windows in the
the switch again stops the movement of the
open position.
window.
Automatic setting of the alarm
Depending on the country in which the vehicle is
sold, the alarm is set automatically approximately
2 minutes after the last door is closed.
Access
The electrical functions of the electric windows

In the event of contact (pinching) during
are deactivated:
operation of the windows, you must
- approximately 45 seconds after the ignition
reverse the movement of the window. To
is switched off,
do this, press the switch concerned.
- after one of the front doors is opened, if the
When operating the passenger electric
ignition is off.
window switches, the driver must ensure
that no one is preventing correct closing of
Safety anti-pinch the windows.
The driver must ensure that the
When the window rises and meets an obstacle, passengers use the electric windows
it stops and partially lowers again. correctly.
Be aware of children when operating the
windows.
After several consecutive attempts to
Reinitialisation close/open the windows using the electric
Following reconnection of the battery, or in the windows control, a protection system
event of a malfunction, the anti-pinch function engages, which only allows for the
must be reinitialised. windows to be closed. After closing, wait
F Bring the window down completely, then approximately 40 minutes. After this time,
bring it back up. It will go up by a few the control will be operational again.
centimetres with each press. Repeat the
operation until the window is fully closed.
F Hold the switch pressed for at least one
second after reaching the window closed
position.
The safety anti-pinch does not operate while
doing this.
Ease of use and comfort
Steering wheel adjustment Mirrors Adjusting the electric door

mirrors
Adjusting the manual door
mirrors
3
F Move the control to the right or to the left to
select the corresponding mirror.
F Move the lever in any of the four directions F Move the control in all four directions to
to adjust it. adjust.
When the vehicle is parked, the door mirrors F Return the control to the central position.
F While at a standstill, unlock the steering
can be folded in manually.
wheel by pulling the control.
They do not have automatic defrosting.
F Adjust the height and reach of the steering
wheel, then lock it by pushing down on the
control. Electric folding/unfolding
The mirrors can be folded or unfolded
electrically from the inside, with the vehicle
parked and the ignition on:
F Place the control in the central position.
F Turn the control downwards.
Defrosting the mirrors Surveillance mirror Front seats

Mirrors that can be adjusted and folded/ Adjustments
unfolded electrically can be defrosted.
Forwards-backwards
F Press the heated rear screen
button.
Forced folding
If the mirror unit has come out of its initial
position, with the vehicle stationary, push it
back into place manually or use the electric
F Raise the control and slide the seat
control.
forwards or backwards.
Rear view mirror (manual) This mirror, placed on top of the central mirror,
enables the driver or front passenger to Tilting the backrest
observe all the rear seats.
Fitted on its own ball joint, its manual
adjustment is simple and provides a view of the
rear interior of the vehicle.
It can also be adjusted for improved visibility
during manoeuvres or when overtaking.
F With your back pressed against the

backrest, press the lever forwards and set
The rear view mirror has two positions: the desired angle.
- day (normal),
- night (anti-dazzle).
To change from one to the other, push or pull
the lever on the lower edge of the mirror.
Seat height (driver) F To remove the head restraint, press the Front heated seats control
button and pull the head restraint upwards.
F To install the head restraint, engage the
rods of the head restraint in the holes,
keeping it in line with the backrest.
3
Never drive with the head restraints
removed; they must be fitted and correctly
adjusted.
F To raise the seat, pull the control upwards
and then take your weight off the seat.
F To lower the seat, pull the control upwards Armrest
and then push on the seat.
Each individual front seat may be fitted with a
control located on the outer part of the seat.
Head restraint height

With the 2+1 bench seat, the
driver's seat control starts or
stops seat heating of the outer
F To access the vertical position, raise the seat of the bench seat.
armrest until it locks. Press to start seat heating.
F Lower the armrest to return it to a position Press again to switch off.
for use.
F To remove the armrest, press the unlocking
F To raise the head restraint, slide it vertically
button from the vertical position and remove
upwards.
the armrest.
F To lower it, press the button and slide the When the seat and passenger
F To put the armrest back in place, clip it on in
head restraint vertically downwards. compartment have reached an adequate
vertical position.
The adjustment is correct when the upper edge temperature, you can stop the function;
F If the vehicle is fitted with the auxiliary
of the head restraint is level with the top of the reducing the consumption of electrical
console and an armrest, remove the
head. current reduces fuel consumption.
console or armrest to fold the passenger
seat into the table position.
Do not use the function when the seat is Individual passenger seat Extenso cab
not occupied.
Prolonged use is not recommended for
those with sensitive skin.
There is a risk of burns for people whose The backrest of the individual passenger seat
perception of heat is impaired (illness, can be folded to enable very long equipment to
taking medication, etc.). be transported.
There is a risk of overheating the system if
material with insulating properties is used, Folding the backrest
such as cushions or seat covers.
Do not use the system:
- if wearing damp clothing,
- if child seats are fitted.
To avoid breaking the heating element in Central seat
the seat: It is fitted with a 3-point seat belt with the belt
- do not place heavy objects on the seat, return fixed to the load stop bars behind the
- do not kneel or stand on the seat, driver.
- do not place sharp objects on the seat,
- do not spill liquids onto the seat.
Mobile office position
To avoid the risk of short-circuit:
- do not use liquid products for cleaning
the seat,
- never use the heating function when
the seat is damp.
F Pull the crank forwards, then tilt the

backrest.
Returning the backrest to F Pull the tongue at the lower edge of the seat
the sitting position to lower the backrest, which incorporates a
writing tray fitted with a strap.
F Pull the crank forwards, then raise the
backrest until it locks.
F To return the backrest to the sitting position, Side seat When retracted, the maximum weight on the
pull the tongue and guide the backrest until backrest is 50 kg.
it locks. To return the seat to the sitting position, lift the
During manipulations, take care not to jam the backrest until the seat locks into position on
tongue under the seat. the floor.
3
Storage compartment under the seat Folded position
Its backrest is fitted with a metal shell.
Retractable position
F Lift the yellow crank at the base of the

seat to unlock and lift the assembly into
the folded position (seat raised against the
backrest) until it locks.
F Lift the central seat to access the storage
compartment. This space can be secured
by fitting a padlock (not supplied). F Pull the tongue on the top edge of the seat
near the head restraint to tilt and guide the This position allows the transport of high loads
assembly. inside the cab.
Each time you lock the seat in the sitting It is placed in the floor of the front seat and
To return the seat to the sitting position, push
position, make sure that passengers have thus forms a continuous flat floor with the load
on the yellow crank under the seat and lower
access to the seat belt end pieces and the space.
the assembly until the seat locks into position
associated straps. This position allows the transport of loads up on the floor.
to 3 m long inside the vehicle with the doors
closed (3.25 m on long wheelbase versions).
High position: lift and raise the head restraint.

Rear bench seat Low position: press on the head restraint to
lower it.
To remove the head restraint after raising it,
press the tab and lift the head restraint.
To re-install the head restraint, engage the rods
of the head restraint in the holes, keeping it in
line with the backrest.
Fully folded position

Example of operations for the 1/3 section. They
are identical for 2/3 section. F Lift the grey control bar located on the back
F Place the head restraints in the low position. of the seat.
F If necessary, move the front seats forward.
The 1/3-2/3 rear bench seat is fitted with

rounded head restraints.
Each 1/3-2/3 section can be folded into the fully
folded position, then removable individually.
Head restraint
F Tilt the assembly forwards.
F Press on the grey control located on the top
of the backrest.
F Fold the backrest onto the seat.
Returning the seat to the sitting position Refitting the bench seat
F Offer up the bench seat (1/3 section and/or
2/3 section) vertically.
F Place the hooks between the two bars.
F Fold the bench seat backwards.
To return the bench seat (1/3 section and/

or 2/3 section) to "passenger transport"
position, refer to the "Fully folded
3
position", described above.
F Place the bench seat (1/3 and/or 2/3

section) in the fully folded position. Rear seats (5 seats)
Refer to the "Fully folded position",
F Tilt the assembly backwards until it locks. described previously.
F Straighten the backrest.
The seat is locked correctly when the control
(at the top of the backrest) is no longer visible.
Check that the seat has correctly engaged

in its anchorages on the floor when
returned to the seating position.
F Tilt the entire seat approximately 45°

Removing the bench seat backwards. The three independent rear seats are fitted with
F Raise the bench seat vertically to the limit rounded head restraints.
F If necessary, move the front seats forward. of the fixings. The backrest of the central seat, folded on to
F Straighten the bench seat by tipping it the seat, has a shell which acts as a tray with a
forwards, then raise it up. cup holder.
Each seat can be removed individually. Adjusting the angle of the backrest Returning the backrest to
Each time the seat is returned to the sitting
position or after having removed and then
the sitting position
refitted it, check that it is locked properly to the F Release the backrest by pulling the control,
floor. then return it to its original position.
When returning the backrest to the sitting
Head restraints position, ensure that it is locked securely.
Placing the seat in the fully

F Use the control to adjust the angle of the
backrest.
folded position
Placing the backrest in the

table position
F Pull the control to place the backrest in the

High position: lift and raise the head restraint. table position.
Low position: press on the head restraint to F Lift the bar, located behind the seat, to
lower it. release the rear anchorage points.
To remove the head restraint after raising it, F Tilt the entire seat forwards until it locks.
F Pull the control to fold the backrest onto the
press the tab and lift the head restraint.
seat cushion.
To install the head restraint, engage the rods of
the head restraint in the holes, keeping it in line
with the backrest. Do not place hard or heavy objects on
the table. They could become dangerous
projectiles in the event of sudden braking
or impact.
Returning the seat to the sitting position F Fold the seat to fix the rear anchorage
points.
F Pull the control to return the backrest to its
initial position.
F Refit the head restraint.
3
Before folding it, check that no object is
obstructing the anchorage points and
preventing correct locking of the seats.
F Press the red lever to unlock the front feet.
F Tilt the assembly by about 45° backwards
without releasing the lever.
F Push the red control.
F Release the lever.
F Fold the seat to fix the rear anchorage Following the various operations:
F Lift the seat vertically until it abuts with the - do not remove a head restraint without
points.
anchorages.
F Lift the backrest by pulling on the control. storing it and fixing it to a support,
F Tilt the seat forwards and then lift it.
F Check that the assembly is anchored - ensure that passengers can always
properly. access the seat belts and fasten them
easily,
- a passenger must not take their seat
Before folding it, check that no object is Refitting the seat without adjusting and fastening the
obstructing the anchorage points and
seat belt.
preventing correct locking of the seats.
Removing the seat

F If necessary, move the front seats forwards
and lower the head restraint.
F Place the seat in fully folded position.
Refer to the "Fully folded" described F Tilt the seat 45° forwards.
earlier. F Place the hooks between the two bars.
This is of the rounded type. Row 2 seat adjustments

Rear seats (7 seats) High position: press the tab, lift and raise the
head restraint. Adjusting the angle of the backrest
Low position: push the tab and press the top of
the head restraint to lower it.
To remove the head restraint: place it in the
high position, lift it, then remove it.
Store it inside the vehicle, securing it firmly.
To re-install the head restraint: engage the rods
of the head restraint in the holes, keeping it in
line with the backrest.
Types of row 2 seat

F Operate the control and adjust the angle.
The seats in rows 2 and 3 are independent and

Placing the backrest in the table
adaptable.
position
Each seat ca be removed and must be refitted
in the specified position, shown by a symbol on F Lower the head restraint fully.
its label.
Head restraint Types of row 3 seat
F Operate the control to fold the backrest onto

the seat cushion.
Returning the backrest to the Returning the seat to the sitting position
sitting position
F Release the backrest by pulling the lever,
then return it to its original position.
F Ensure that it has correctly locked into
place.
Placing the seat in the fully

folded position
F Use the control to fold the backrest onto the
3
seat.
F Unfold the entire seat.
Returning the backrest to the

Before folding the seat, ensure that: sittting position
- in row 3, no passenger's foot is
F Unlock the backrest by pulling the control
obstructing one of the seat anchorages
and then return it to its initial position.
on the floor,
F Check that the assembly is anchored
- the seat is locked securely on the floor,
properly.
- the seat belt is available for the
F Place the seat in the table position. passenger.
F Pull the red strap located behind the seat Placing the seat in the portfolio
to release the feet of the seat from their position
anchorage on the floor.
F Tilt the entire seat forwards.
Modularity of the Row 3 seat
Placing the backrest in the table
position
F Lower the head restraint as far as it will go.
F Change to the table position.
F Lift the bar, fitted with a red strap, located Entering, exiting from row 3
behind the seat, to release the feet of the
seat from their anchorage in the floor.
F Tilt the entire seat forwards. Entering
Returning the seat to the sitting
position
Before folding it back, ensure that the

feet of the passenger in row 3 are not
obstructing the row 2 seat anchorage
points.
F Place the row 2 seat in the table position.
Exiting
F Push the red control.
F Lower the head restraint fully.
F Fold the entire seat backwards.
Ensure:
- that the seat is locked properly to the
floor,
- that the seat belt is available for the
passenger.
F Tilt it to the fully folded position to allow

access.
F Operate the yellow control located on the
back of the row 2 seat backrest.
F Fold the seat backrest to the table position.
Operating the row 2 seats F Place the hooks of the feet between the two
bars.
F Fold the seat back to secure the rear
Removing the seat anchorage points.
F Operate the control to raise the seat
backrest to its initial position.
F Raise the head restraint.
F Pull the red strap to place the seat in the

3
fully folded position.
F Tilt the entire seat forwards.
F If necessary, move the front seats forward.
F Lower the head restraint.
F Place the seat in the fully folded position.
F Tilt the entire seat forwards then lift it.
Ensure that no object or foot of a
passenger seated in the rear is obstructing
the anchorage points or preventing correct
locking of the seat.
Refitting the seat
F Exit via the side door.

The label on the seat indicates the position in Operating the
which it must be installed. Row 3 seats
Ensure that the centre seat belt is stowed Removing the seat
correctly in its housing in the headlining.
F
F
Lower the head restraint.
Place the seat in fully folded position.
Do not place hard or heavy objects on Crew cab
the backrests forming a table. They could
F Tilt the assembly forwards.
become dangerous projectiles in the event
F Take hold of each side of the uprights of the
of emergency braking or collision.
folded seat while tilting it forwards and lift it.
Following the various operations:
- do not remove a head restraint without
stowing it; secure it inside the vehicle,
Refitting the seat - ensure that passengers can always
access the seat belts and fasten them
The seat label will tell you where it should be easily,
placed. - passengers must never take their seat
without adjusting and fastening their
seat belt.
- a passenger seated in row 3 must
ensure that they do not obstruct the
row 2 seat anchorage points,
- a passenger seated in row 3 must
not have the seat in front of them in
row 2 in the fully folded position; this
is in case the seat tips towards the Bench seat
passenger unexpectedly, which could
F Place the hooks of the front feet between cause injury. The crew cab is made up of a bench seat for
the two bars. 3 persons, located in row 2, whose one-piece
F Ensure that no object or feet are obstructing backrest is integrated with the load stop grille.
the rear anchorage points and that the seat Access to the rear seats is via the sliding side
belt is properly positioned and available. door.
F Fold the seat backwards to fix its rear
anchorage feet.
F Use the control to raise the backrest into the
initial position.
F Refit the head restraint.
Placing the seat in the fully folded position Returning the seat to the sitting position
3
F With the same hand, fold the backrest and
associated grille onto the seat.
F If necessary, move the front seats forward

F In a single movement, take hold of the red
and fasten the central seat belt.
strap and pull the assembly horizontally and
F Check that the straps and loops of the seat
backwards. Support the movement until the
belts are properly placed along the side
feet of the bench seat lock into the floor.
panels, so that the sliding of the backrest is
F Straighten the backrest. The control A
not obstructed.
unlocks automatically.
F Release the backrest by pulling the
F Check that the bench seat, returned to the
control A.
F Grab the red strap (like a handle) and lift sitting position, is locked correctly on the
the assembly vertically, supporting the floor.
movement until in the fully folded position. Do not let the assembly drop abruptly.
The raised seat is supported on the backrests
of the seats in row 1.
Head restraints and seat Seat modularity and configurations

belts
The various operations must be carried
The three seats are equipped with seat belts
out when stationary.
with inertia reels. The seat belts of the side
seats are secured on the panels, while the seat
belt of the central seat is secured on the back 5-seat configuration
of the seat.
Each seat has a head restraint, screwed to the
load stop grille, which can be removed.
Do not place a head restraint inside the

vehicle without stowing it or securing it to a
support.
Do not drive with rear passengers without
having the head restraints secured in place.
There is no need to assist, guide or retain

it by the arm that remains free during the
tilting movement.
The rear seat belt fittings are not designed

to secure the load. Use only the stowing
rings on the floor.
The crew cab bench seat is not suitable

for the installation of a child seat.
7-seat configuration Load space layout
Examples of various layouts for both pleasure
3
and convenience:
2. Storage tray and bottle holder (1.5 L). Centre storage console
3. Side storage.
4. Bag hook.
Only flexible bags which are not too heavy

bags can be hung on this hook.
Upper glove box

This is located in the dashboard, behind the
steering wheel.
This console offers a considerable additional
storage space: it is removable, and is
Front fittings clipped on a base that also incorporates two
cupholders in the back.
Make sure that the object (bottle, can, etc.) in
the cup holder is held securely and does not
present a risk of falling while driving.
Liquids could be spilt, presenting a risk of
damage on contact with the controls in the
dashboard and centre console.
Take care.
A cut-out makes it easier to raise the cover to

1. Lower glove box (with or without lid).
open it. Guide it to its stop position.
To close it, guide the cover then press the
centre gently.
Never drive with the glove box open when Any liquid which could spill risks causing an
a passenger is sitting at the front. It may electrical short circuit and therefore a potential
cause injury during sharp deceleration. fire.
Overhead storage unit Under-seat storage Seating area fittings
3
Floor boxes
This is located above the sun visors and can There is storage space, with or without lid, on
accommodate various items (a sweater, folder, the floor under the front seats.
gloves, etc.).
The openings concealed by the sun visors
allow you to see and access items stored in the
F To access it, move the seat
overhead storage unit.
forward. The lid can be lifted
The maximum weight permitted in the overhead There are two storage boxes located under the
from the back of the seat.
storage unit is 5 kg. rear passenger footwells.
F To open them, slide your fingers into the
Do not place items in this storage unit notch and lift the cover.
F Move the seat forward for
which could pose a risk to the occupants.
easy access to the storage
space. The tool kit is located
here.
Sun visor
F To avoid glare from ahead, fold the sun
visor down.
A pocket is provided on the driver's sun visor to
hold toll tickets, receipts, etc.
Aircraft style tables Side blinds Modutop
The multifunction roof extends the overhead

storage unit. It consists of the following
elements.
Storage compartments
Side blinds may be available on the sliding side

F To put the table in place, pull it upwards and
doors.
fold it down.
F Pull the side blind by the tab to install it.
As a safety precaution, the aircraft style table is
To avoid damaging the blind when opening the
designed to unhook itself if excessive pressure
door, make sure the tab is securely fastened.
is applied.
F To put it back in place, with the table in a
vertical position, engage one side and then
the other, pushing gently.
Always guide the blind slowly using the
tab, both up and down.
Do not place hard or heavy objects on
the table. They could become dangerous Storage compartments are provided on each
projectiles in the event of emergency side of the roof. The maximum authorised load
braking or collision. is 6 kg.
The translucent base helps you to find objects
stored inside.
A bag hook is available on the side of each
table.
Do not place items in this storage unit
which could pose a risk to the occupants.
Courtesy lamp Air vents
3
F From the rear seats, slide the flaps to open
the box. A 3-position control allows you to adjust the air
flow through the vents.
The air vents are also fitted with a fragrance
diffuser.
It operates in the same way as the front
courtesy lamp.
Fragrance diffuser
For more information on the Courtesy
lamps, refer to the corresponding section.
Rear box F From the vehicle boot, place your thumb on

the recess then pull the handle to open.
This roof box can be accessed from the rear
seats and from the boot.
Open carefully to prevent any objects
stored in this interior roof box from falling The fragrance diffuser diffuses a fragrance
out. in the passenger compartment from the roof
The maximum authorised load is 10 kg. console vents.
Flow adjustment F Press the button while turning it a quarter The fragrance diffuser button A can only be
turn to the left up to the stop. attached to the multifunction roof by using a
F Remove the fragrance diffuser from the cartridge.
dashboard. For that reason you should always keep button
F Replace your cartridge. A and a cartridge.
The cartridges are available from CITROËN
dealers.
Replacing a cartridge
Inserting the fragrance diffuser
After installing or replacing the cartridge:
F put the fragrance diffuser back in its
housing,
F Turn the chrome button to adjust the
F turn it a quarter turn to the right.
diffusion:
- to the left to decrease,
- to the right to increase.
The fragrance diffuser refill consists of a
F To stop the diffusion, turn the chrome button
cartridge B and its sealed container C.
fully to the left.
F Remove the protective film D.
F Put the head of cartridge B on button A on
Removing the fragrance diffuser the fragrance diffuser.
F Turn it a quarter turn to lock it on the button
and remove the cover.
F Insert the fragrance diffuser into its housing.
You can replace cartridges at any time and
keep cartridges that have already been opened
in their original cover.
The fragrance diffuser button A is independent

of the cartridge. The cartridges are delivered
without button A.
Light is permanently on, ignition on.

Courtesy lamps
Front courtesy lamp
In the front: light comes on upon
opening one of the front doors.
3
In the rear: light comes on upon
opening one of the rear doors.
If the doors remain open for a few
minutes, the courtesy lamps go off.
For safety reasons, only use cartridges
designed for this purpose. Never Permanently off.
dismantle the cartridges. Rear courtesy lamp
Retain the cartridge sealing caps which
serve as packaging if the cartridge is not
used.
Never try to refill the cartridges with other Individual front reading
perfumes than those recommended by lamps
CITROËN dealers.
Keep cartridges out of the reach of
children or pets. Avoid contact with the
skin or eyes. In the event of ingestion,
consult a doctor, showing them the
product packaging or label.
Automatic switching on/off
The front courtesy lamp comes on when the
ignition key is removed, the vehicle is unlocked,
when one of the front doors is opened and for
location of the vehicle using the remote control.
It goes off gradually after the ignition is
switched on and when the vehicle is locked. They are switched on and off by means of
a manual switch, with the ignition on.
Rear fittings (5 seats) To remove it
Load space cover
F Slide it vertically between the side guides

located mid-height of the backrests.
F Fold it. F Insert the hinge first with the floating folds
F Release it from catches A and B by pulling facing upwards.
towards you.
F Lift it up and remove the assembly. When sharp deceleration occurs, objects
placed on the luggage cover can turn into
projectiles.
This rigid shelf conceals the items stored in the To refit it
boot. F Place the load space cover in front of A 12 volt socket (120 W max)
and B.
F Push forward to insert the lugs into the
To fold it catches.
F Fold the half-shelf from the boot, lifting it up F Unfold and clip into catches C.
to release it from the catch C.
To store it (depending on version)

There is a space in the rear seat backrest to
accommodate the folded load space cover.
It is advisable to limit its use to avoid

discharging the battery.
F Open the cover located in the hook support.

The connection of an electrical device Liquids carried in an open vessel (a cup or
F Secure the top of the net in the notches,
not approved by CITROËN, such as a mug) could be spilt, presenting a risk.
having first rotated the bar by a quarter of a
USB charger, may adversely affect the
turn.
operation of vehicle electrical systems,
F Ensure that the end of the bar has engaged
causing faults such as poor telephone
correctly in the metal part of its housing.
reception or interference with displays in
F Secure the straps in the locations provided 12 volt socket
3
the screens.
on the floor.
F Tighten the net using the straps.
Stowing rings
Rear fittings (7 seats)

Maximum power: 120 W.
discharging the battery.
Use these rings to secure your loads on the Cup holder Stowing rings
floor.
Protective net
Use the stowing rings on the floor to firmly

attach and secure your loads.
The seat belt anchorages must not be used for The recess immediately next to the boot sill
this purpose. is intended to accommodate the rolled tube
containing the load space cover.
It is recommended that the load be
secured firmly using the stowing rings on Roller-blind type load space
the floor.
cover
The load space cover is a roller-blind type
cover. Take care not to place heavy objects on
Storage hatches the load space cover when unreeled.
To install it
F Position the blind so that the rear load
F Fold the third row seats fully. space cover flaps are towards you.
F Lift the storage hatch at the boot sill.
F Lift the corresponding hatch.
F Engage the left lug of the reel in bracket A.

F Grab the reel in the middle and press it
against the left-hand pillar.
F Lift the assembly.
The reel has three flaps to conceal the

boot, whether the seats of the second row
are in normal or comfort position.
Each flap has two clamps that snap to the
rods of each head restraint.
To remove it
3
F Compress it, and then place the right lug F From the boot, pull the load space cover F Compress the reel to the left to remove it
facing bracket B. towards you to release it from the pillars. from bracket B.
F Release to engage the reel in its bracket. F Lift it up and roll it forward.
To stow it
Stow it in the recess at the boot sill, the two
rear flaps up.
F Guide the load space cover as it reels in.

F Unroll the load space cover up to the rear
F Remove the clamps of the three shutters at
side pillars.
the rods of each second row head restraint.
F Engage the ends in the rear notches to keep
it taut. F First, compress the blind to the left.
F Release.
The connection of an electrical device Trim

not approved by CITROËN, such as a
USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor telephone
reception or interference with displays in
the screens.
F Arrange the two flaps and close the hatch.
Stowing rings
Load space layout
12 volt socket (120 W max) The interior parts of the sides are fitted with
load protection trims.
Use the stowing rings on the rear floor to attach

your loads.
Load stops
Your vehicle can have a wide range of load
stops to effectively protect the driver and
As a safety precaution in case of sharp front passenger(s) while maintaining loading
braking, you are advised to secure the modularity.
load by attaching it firmly using the
stowing rings and to place heavy objects
as far forwards towards the cab as Consult a CITROËN dealer for the
possible. different models of load restraint
discharging the battery. accessories.
Bars Half-height partition Partition with flap
3
Full glazed partition
Removable flap
The flap located on the panelled section of
the mid-height partition, behind the passenger
seat(s), can be removed to enable long items to
be loaded.
F Turn the control at the top of the flap to
release it.
F Lift the flap to remove it from its housing.
F Rotate the flap by 90° to the right.
F Stow it behind the driver’s seat, clipping it
into the attachment lugs.
Heating/Manual air Temperature the windscreen and the footwells,
conditioning Control positioned:

the windscreen.
in the blue, delivers cool air,
The air distribution can be adapted

by placing the control in one of the
in the red, triggers heating of the intermediate positions marked with
ambient air. "●".
Heating
Intake of exterior air
Air flow
The LED in the button is off. This is
The rate of air flow from the vents the preferred operating position.
varies from 1 to 4, the strongest. In
position 0 it is switched off.
Remember to adjust this control Recirculation of interior air
in order to reach the ambient air
Manual air conditioning The LED in the button is on.
comfort level.
Recirculation temporarily prevents
exterior odours and smoke
1. Temperature adjustment. Air distribution from entering the passenger
2. Air flow adjustment.
compartment.
3. Air distribution adjustment. The air supply distribution is determined by the
Used with the fan setting (from 1 to 4),
4. Air intake/Air recirculation. control turned towards:
recirculation enables you to obtain the required
5. Air conditioning On/Off. the side vents and central vents, ambient air comfort level more quickly with both
hot or cold settings.
This position should only be used temporarily.
the footwells, When your ambient air comfort level has
been reached, return to the intake of exterior
air position to permit renewal of the air in the
passenger compartment and avoid misting.
This is the preferred operating mode.
Air conditioning A/C When the engine is cold, the air flow will only
For maximum cooling or heating of the
reach its optimum level gradually to prevent too
passenger compartment, it is possible to
The air conditioning only works with the engine much cold air being distributed.
exceed the value 15 by turning till LO is
running. For your convenience the settings are stored
displayed or the value 27 by turning till HI
between two starts of your vehicle.
Pressing the button switches the air is displayed.
The automatic function will no longer be
conditioning on; the LED comes on. On entering the vehicle, the interior
3
maintained if you change a setting manually
Pressing the button again switches temperature may be much colder (or
(AUTO clears).
the function off; the LED goes off. warmer) than the comfort temperature.
There is no need to alter the value
displayed in order to reach the required
The air conditioning cannot operate when the level of comfort quickly. The system will Driver or passenger comfort
air flow is set to 0. use its maximum power in order to reach value
the required level of comfort.
The value shown on the display is a level of
Dual-zone automatic air comfort, not a temperature in degrees Celsius
or Fahrenheit.
conditioning Automatic operation
F Rotate this control to the left
or to the right to decrease
AUTO comfort program or increase the value. A
setting of around 21 provides
This is the normal operating mode for the air
optimum comfort. Nonetheless,
conditioning system.
depending on your needs, a
F Press this button. The AUTO setting between 18 and 24 is
1. AUTO comfort program. symbol appears. typical.
2. Temperature adjustment on driver/
passenger side. Depending on the selected level of comfort, the
3. Air distribution adjustment. system controls the distribution, flow and intake of Do not obstruct the sunshine sensor on
air to ensure comfort and sufficient recirculation the dashboard.
4. Air flow adjustment.
of air in the passenger compartment. No further
5. Air intake/Air recirculation.
adjustments are required.
6. Air conditioning On/Off.
Manual operation Deactivating the system Air conditioning On/Off

If you wish, you can make a different choice F Press the small fan air flow
from that offered by the system by changing a button until the fan symbol F Once this button is pressed, the
setting. The other functions are still managed disappears. A/C symbol will be displayed
automatically. Pressing the AUTO button and the air conditioner
returns the system to full automatic operation. activated.
This will deactivate all system functions except Pressing this button again stops cooling of the
air recirculation and rear screen defrost (if your air.
vehicle is so equipped). Your comfort setting is
Air distribution no longer maintained and goes off screen. The ventilation outlet located in the
Press this button repeatedly to direct For your comfort, avoid staying in the glove box diffuses fresh air (if the air
the air flow towards: deactivated position. conditioning is activated), depending on
the desired temperature setting in the
- the windscreen, passenger compartment and the exterior
Pressing the large fan button or the
- the windscreen and the footwells, temperature.
AUTO button again reactivates the
- the footwells, system with the values set before
- the side vents, central vents and footwells, the deactivation.
- the side vents and central vents,
Intake of exterior air/

Recirculation of interior air
Air flow F Press this button to recirculate
the interior air. The recirculation
F Press the small fan button to symbol is displayed.
reduce air flow or the large fan
button to increase air flow.
Recirculation temporarily prevents exterior
odours and smoke from entering the passenger
The fan blades fill up in the screen, as the flow compartment. Avoid prolonged operation in
rate increases. interior air recirculation mode (risk of misting,
odour and humidity).
Pressing this button again activates the intake
of exterior air.
Recommendations for ventilation and air conditioning If after an extended stop in sunshine,
the interior temperature is very high, first
In order for these systems to be fully effective, F To ensure correct operation of the ventilate the passenger compartment for
follow the operation and maintenance air conditioning system, you are also a few moments.
guidelines below: advised to have it checked regularly as Put the air flow control at a setting high
F To ensure that the air is distributed evenly, recommended in the Maintenance and enough to quickly change the air in the
3
keep the external air intake grilles at the Warranty Guide. passenger compartment.
base of the windscreen, the nozzles, the F If the system does not produce cold air,
vents, the air outlets and the air extractor switch it off and contact a CITROËN
in the boot free from obstructions. The condensation created by the air
F Do not cover the sunshine sensor, conditioning results in a discharge of
When towing the maximum load on a steep
located on the dashboard; this is used for water under the vehicle which is perfectly
gradient in high temperatures, switching off
regulation of the automatic air conditioning normal.
the air conditioning increases the available
system. engine power and so improves the towing
Depending on version and country
F Operate the air conditioning system for ability.
of sale, the air conditioning system
at least 5 to 10 minutes once or twice a To avoid the windows misting up and
contains fluorinated greenhouse gas
month to keep it in perfect working order. deterioration in the quality of the air:
R134A.
F Ensure that the passenger compartment - do not drive for too long with the
Gas capacity: 0.450 kg (+/- 0.025 kg),
filter is in good condition and have the ventilation switched off.
GWP index 1,430 t (equivalent CO2:
filter elements replaced regularly. We - do not keep air recirculation set for an
0.644 t).
recommend the use of a combined extended period.
passenger compartment filter. Thanks to
its special active additive, it contributes Stop & Start
to the purification of the air breathed by The heating and air conditioning systems
the occupants and the cleanliness of the only work when the engine is running.
passenger compartment (reduction of Temporarily deactivate the Stop &
allergic symptoms, bad odours and greasy Start system to maintain a comfortable
deposits). temperature in the passenger
compartment.
For more information on Stop & Start,
refer to the corresponding section.
Demisting and defrosting Automatic mode: visibility Defrosting the rear screen
program and/or door mirrors
The comfort program (AUTO) may not be
Manual mode sufficient to quickly demist or defrost the
Pressing this button, with the engine
windows (humidity, several passengers, frost,
running, activates rapid demisting/
etc.).
defrosting of the rear screen and/or
electric mirrors.
This function switches off:

- when the button is pressed,
- when the engine is switched off,
F Turn the control to this air - automatically to prevent excessive energy
distribution setting. consumption.
F Turn the control to this

temperature setting.
F Increase the air flow setting,
In this case, select the visibility program. The

F Press the air conditioning visibility program indicator comes on.
button. It activates the air conditioning, the air flow, and
provides optimum distribution of the ventilation
Returning to exterior air intake open towards the windscreen and side windows.
permits renewal of the air in the It deactivates the air recirculation.
passenger compartment (LED off).
Lighting and visibility
Reminder, lights on They are selected by rotating the push ring

Lighting control forwards to switch on and to the rear to switch off.
When switching off the ignition, all of the lights The state is indicated by the indicator lamp in the
Front and rear lights turn off, except for dipped beam if the guide- instrument panel.
me-home lighting is activated.
Front foglamps (green, the ring is
F To activate the lighting control, set the ring turned forwards once).
to 0 (lamps off), then to the desired position.
Rear foglamps (amber, the ring is
4
When the driver's door is opened and the lights turned forwards twice).
are on, an audible signal will sound.
Selection is made by rotating this ring. To avoid discharging the battery, the Economy
To turn the rear and front foglamps off, turn the
mode is triggered after thirty minutes without
ring twice to the rear.
any action by the user. The functions are put on
Lights off
standby and the battery warning lamp flashes.
The sidelamps are not affected by the
Economy mode. In clear weather or in rain, both day and
Lights with automatic illumination night, rear foglamps dazzle and their use
is prohibited.
Sidelamps
Do not forget to switch them off when they
For more information on the Economy are no longer necessary.
mode, refer to the corresponding section. Automatic illumination of headlamps
Dipped headlamps (green)
switches the rear foglamps off, but the
Main beam (blue)
front foglamps stay on.
Switching between dipped and Front and rear foglamps

main beam
These work with the sidelamps and dipped
F Pull the stalk fully towards you. headlamps.
Automatic illumination of Deactivation Guide-me-home lighting

headlamps F Turn the ring forwards or rearwards. The Keeping the dipped beam headlamps on
deactivation of the function is accompanied temporarily after switching the ignition off makes
The sidelamps and dipped beam headlamps
by a message on the screen. the driver's exit easier when the light is poor.
switch on automatically if the light is poor or
during operation of the windscreen wipers.
The function is switched off temporarily off
They switch off again as soon as the ambient
when the manual lighting control is used.
light becomes bright enough or the windscreen
wipers stop.
In the event of a malfunction of
Manual operation
This function is not compatible with daytime
running lamps. the sunshine sensor, the lights F With the ignition off, "flash" the headlamps
come on, accompanied by the within one minute after switching off the
illumination of the service warning ignition.
In fog or snow, the sunshine sensor may
lamp, an audible signal and a Manual guide-me-home lighting goes off
detect sufficient light.
message on the screen. automatically after a certain period of time.
As a result, the lighting will not come on
Contact a CITROËN dealer or a qualified
automatically. If necessary, you must
workshop.
switch on the dipped beam headlamps
manually. Automatic operation
LED daytime running lamps F This function is activated via the
On starting the vehicle, in daylight the LED vehicle configuration menu.
Do not cover the sunshine sensor located
on the windscreen behind the rearview daytime running lamps come on automatically.
mirror. It is used for automatic illumination If the sidelamps, dipped or main headlamps
of the headlamps and for the automatic are switched on manually or automatically, the For more information on the Audio and
rain sensitive wipers. daytime running lamps switch off. Telematics, refer to the corresponding
section.
Activation Programming
F Turn the ring to the AUTO For countries where exterior lighting by day is
position. The activation of the is not a legal requirement, you can activate or
accompanied by a message on deactivate the function via the configuration
the screen. menu.
Programming 0- Empty.
Cornering lighting 1- Partial load.
The function is activated or deactivated via the 2- Medium load.
vehicle configuration menu. 3- Maximum authorised load.
This system is activated by default.
The initial setting is position 0.
Direction indicators
(flashers) Travelling abroad
If using your vehicle in a country that
Left: lower the lighting control stalk passing the
4
drives on the other side of the road, the
point of resistance.
headlamps must be adjusted to avoid
With dipped or main beams, this system Right: raise the lighting control stalk passing
dazzling on-coming drivers.
makes use of the beam from a front foglamp the point of resistance.
Contact a CITROËN dealer or a qualified
to illuminate the inside of a bend, when the workshop.
vehicle speed is below 25 mph (approximately "Motorway" function
40 km/h) (urban driving, winding road,
intersections, parking manoeuvres, etc.). Press the control stalk briefly upwards or
downwards to make the corresponding
direction indicators flash three times.
Switching on
This function operates: Headlamp beam Wiper control stalk
- when the corresponding direction indicator
is switched on, You are advised to adjust the headlamp beams
or in accordance with the load in your vehicle.
- from a certain angle of rotation of the
steering wheel.
Switching off
The system does not operate:
- below a certain angle of rotation of the
steering wheel,
- above 25 mph (40 km/h),
- when reverse gear is engaged.
Manual wiping Activation

The fluid level should be checked
F Press the control downwards. Activation of
regularly, particularly during winter.
2 Fast wiping (heavy rain). the function is accompanied by a message
For more information on Checking the
1 Normal wiping (moderate rain). on the screen.
levels and, in particular, the screenwash,
I Intermittent wiping. If the ignition has been off for more than one
refer to the corresponding section.
0 Off. minute, the automatic rain sensitive windscreen
wipers must be reactivated by pushing the
â Single wipe
control stalk downwards.
(press downwards).
Deactivation
In Intermittent position, the wiping frequency is F Place the wiper control stalk in position I, 1
proportional to the speed of the vehicle. or 2.
Deactivation of the function is accompanied by Special position of the
a message on the screen.
After the ignition has been switched off for
If a fault occurs with the automatic rain
windscreen wipers
more than a minute, with the wiper control
stalk in position 2, 1 or I, the control must be sensitive wipers, the wipers will operate in Operate the wiper stalk within one minute after
reactivated. intermittent mode. switching off the ignition to position the wiper
- Move the control to any position. Contact a CITROËN dealer or a qualified blades along the windscreen pillars.
- Switch it to the desired position. workshop to have the system checked. This action allows the wipers to be taken up for
winter parking, cleaning or replacement.
During an automatic wash, turn off the
ignition to avoid automatic wiping being
Automatic windscreen
triggered.
wipers For more information on Changing a
Do not obstruct the rain sensor, wiper blade, refer to the corresponding
located in the centre of the In winter, it is advisable to wait until the section.
windscreen, behind the rear view windscreen is completely clear of ice before
mirror. activating the automatic rain sensitive wipers.
In AUTO position, the wipers operate To return the wiper blades to the normal
automatically and adapt their speed to the Windscreen washer position, switch on the ignition and operate the
intensity of the rain. F Pull the control towards you, the wiper stalk.
screenwash action will be accompanied by
a timed operation of the wipers.
Rear wiper
4
F Turn the ring as far as the first
notch.
Rear screenwash
F Turn the ring beyond the first
notch; the washer and wiper
then work for a preset time.
In winter, if it is snowing or there is a

severe frost, start the defrosting of the
rear screen. Once the defrosting has
finished, clear the accumulated snow or
frost on the rear wiper blade. You can then
turn on the rear wiper.
Safety
General safety We draw your attention to the following Installation of accessory radio
recommendations points:
- The fitting of electrical equipment
communication transmitters
Before installing a radio communication
or accessories not approved by transmitter, you must contact a CITROËN
CITROËN may cause excessive dealer for the specification of transmitters
Labels are affixed in different locations on current consumption and faults and which can be fitted (frequency, maximum
your vehicle. They include safety warnings failures with the electrical system of power, aerial position, specific installation
and vehicle identification information. Do your vehicle. Contact a CITROËN requirements), in line with the Vehicle
not remove them: they are an integral part dealer for information on the range of Electromagnetic Compatibility Directive
of your vehicle. recommended accessories. (2004/104/EC).
- As a safety measure, access to
the diagnostic socket, used for the
vehicle's electronic systems, is
reserved strictly for CITROËN dealers
For all work on your vehicle, use a or qualified workshops, equipped
qualified workshop that has the technical with the special tools required (risk
information, skills and equipment required, of malfunctions of the vehicle's Depending on country regulations, some
all of which a CITROËN dealer is able to electronic systems that could cause safety equipment may be compulsory:
provide. breakdowns or serious accidents). high visibility safety vests, warning
The manufacturer cannot be held triangles, breathalysers, spare bulbs,
responsible if this advice is not spare fuses, fire extinguisher, first aid kit,
followed. mud flaps at the rear of the vehicle, etc.
- Any modification or adaptation not
intended or authorised by CITROËN
or carried out without meeting the
technical requirements defined by
the manufacturer will result in the
suspension of the legal and contractual
warranties.
Safety
The green LED remains on (without flashing)

Hazard warning lamps Emergency or assistance when communication is established.
call It goes off at the end of the call.
For Russia, Belarus and Kazakhstan. "Localised Emergency Call" immediately
locates your vehicle, contacts you in your own
language** and – if necessary – requests
that the relevant emergency services are
dispatched**. In countries where the service is
not available, or when the locating service has
been expressly declined, the call is sent directly
F Press the red button, the direction indicators
to the emergency services (112) without the
flash.
vehicle location.
They can operate with the ignition off.
5
The hazard warning lamps should only be used If an impact is detected by the airbag
in dangerous situations, when stopping in an control unit, and independently of the
emergency or when driving in unusual conditions. deployment of any airbags, an emergency
call is made automatically.
Automatic operation of
hazard warning lamps Localised Emergency Call * In accordance with the general conditions
When braking in an emergency, depending on In an emergency, press this of use for the service available from dealers
the force of deceleration, the hazard warning button for more than 2 seconds. and subject to technological and technical
lamps come on automatically. They switch off The flashing green LED and limitations.
automatically the first time you accelerate. the voice message confirm that
** According to the geographic coverage of
It is also possible to switch them off by pressing the call has been made to the
"Localised Emergency Call", "Localised
the switch on the dashboard. "Localised Emergency Call"
Assistance Call" and the official national
service*.
language chosen by the owner of the vehicle.
Horn Pressing this button again The list of countries covered and telematic
services is available from dealers or on the
immediately cancels the call.
F Press the centre of the steering wheel. website for your country.
The green LED goes off.
Safety
If you benefit from the Citroën Connect Localised Assistance Call Emergency Call" and "Localised Assistance
Call" buttons, followed by pressing "Localised
Box offer with the SOS and assistance
Press this button for more than Assistance Call" to confirm.
pack included, there are additional
2 seconds to request assistance if
services available to you in your personal
the vehicle breaks down.
space, via the website for your country. If you purchased your vehicle outside the
Brand network, we invite you to check
the configuration of these services and,
A voice message confirms that the call has
if desired, have a dealer change it to suit
been made**.
your wishes. In a multilingual country,
Operation of the system
Pressing this button again configuration is possible in the official
For Russia, Belarus and Kazakhstan. immediately cancels the request. national language of your choice.
When the ignition is switched on,

the green indicator lamp comes The cancellation is confirmed by a voice
on for 3 seconds, showing that message.
For technical reasons, particularly to
the system is operating correctly. improve the quality of the telematic
Geolocation services for customers, the manufacturer
The red indicator lamp is on reserves the right to carry out updates to
continuously: there is a system the vehicle's on-board telematic system.
fault.
The red indicator lamp flashes: replace the You can deactivate geolocation by
back-up battery. simultaneously pressing the "Localised ** According to the geographic coverage of
Emergency Call" and "Localised Assistance "Localised Emergency Call", "Localised
In either case, the emergency and assistance Call" buttons, followed by pressing "Localised Assistance Call" and the official national
calls may not function. Assistance Call" to confirm. language chosen by the owner of the vehicle.
Contact a qualified repairer as soon as The list of countries covered and telematic
possible. services is available from dealers or on the
website for your country.
The fault with the system does not prevent You can reactivate geolocation by
the vehicle being driven. simultaneously pressing the "Localised
Safety
If this warning lamp comes on

Anti-lock braking system accompanied by an audible signal
To maintain operation of the emergency
(ABS/EBFD) and a message in the screen, it
braking assistance system, press very
firmly on the brake pedal, maintaining this
indicates a malfunction of the ABS
The ABS and EBFD (electronic brake force pressure.
which could result in a loss of control
distribution) systems improve the stability and
of the vehicle when braking.
manoeuvrability of your vehicle when braking,
in particular on poor or slippery surfaces.
If this warning lamp comes on
The ABS prevents the wheels from locking,
together with the brake and STOP
and the EBFD provides control of the braking
pressure wheel by wheel.
warning lamps, accompanied by an Anti-slip regulation (ASR)
audible signal and a message in the
screen, it indicates a malfunction
and electronic stability
The anti-lock braking system comes into of the electronic brake force control (ESC)
operation automatically when there is a risk distribution, which could result in a
5
of wheel lock. It does not reduce the braking loss of control of the vehicle when
distance. braking.
On very slippery surfaces (ice, oil, etc.), the Stop as soon as it is safe to do so.
ABS may increase the braking distance. When In both cases, contact a CITROËN dealer or a
braking in an emergency, do not hesitate to qualified workshop.
press the brake pedal firmly without releasing
the pressure, even on a slippery surface; you These systems are associated with and
will then be able to continue to manoeuvre the Emergency braking complementary to the ABS.
The ASR system is very useful for maintaining
vehicle to avoid an obstacle.
assistance (EBA) optimum traction and avoiding loss of control of
In an emergency, this system enables you to the vehicle during acceleration.
reach the optimum braking pressure more This system optimises traction to prevent the
Normal operation of the ABS may be felt wheels from skidding by acting on the brakes
by slight vibration of the brake pedal. quickly.
It is triggered in relation to the speed at which of the driving wheels and on the engine. It also
the brake pedal is pressed. improves the directional stability of the vehicle on
This alters the resistance of the brake pedal acceleration.
under your foot. With the ESC system, maintain the course
When changing wheels (tyres and rims), without attempting to countersteer.
ensure that these are approved by
CITROËN.
Safety
If there is a difference between the path followed Operating fault

by the vehicle and that required by the driver, the
Grip control
ESC system automatically acts on the brake of Special patented traction control system which
one or more wheels and on the engine to return In the event of a malfunction of the improves traction on snow, mud and sand.
the vehicle to the required path. systems, the warning lamp and the This system, the operation of which has been
LED come on, accompanied by an optimised for each situation, allows you to
Operation audible signal and a message on the manoeuvre in most conditions of poor grip
The warning lamp flashes when the screen. (encountered during touring use).
ASR or ESC is triggered.
Contact a CITROËN dealer or a qualified The accelerator pedal should be pressed
workshop to have the system checked. sufficiently to allow the system to use the power
Deactivation The warning lamp may also come on if the of the engine. Operation at high engine speeds
tyres are under-inflated. Check the pressure of is completely normal.
In exceptional conditions (moving a vehicle that
each tyre.
is bogged down in mud, stuck in snow, on loose A five-position selector knob allows you to
soil, etc.), it may prove useful to deactivate the choose the setting best suited to the driving
ASR and ESC systems, so that the wheels can Although the ASR/ESC systems help to conditions encountered.
spin and regain grip. improve safety in normal driving, they An indicator lamp associated with each mode
should not encourage the driver to take comes on to confirm your choice.
extra risks or drive at high speed.
F Press the button or turn the The correct operation of these systems
knob to the ESC OFF position is ensured if the recommendations of the
(depending on the version). manufacturer regarding the wheels (tyres Operating modes
and rims), the braking components, the
The LED lights up: the ASR and ESC systems electronic components and the installation
are deactivated. and repair procedures are observed.
After an impact, have these systems
They reactivate again: checked by a CITROËN dealer or a
- automatically above 30 mph (50 km/h), qualified workshop.
- manually when you press the

button again or turn the knob
to this position (depending on
version).
Safety
Standard (ESC) All terrain (mud, damp grass, Your vehicle is designed principally to
etc.) drive on tarmac roads but it allows you to
This mode is calibrated for a low
level of wheel spin, based on the This mode, when moving off, allows occasionally drive on other less passable
different levels of grip normally considerable spin on the wheel with terrain.
encountered on the road. the least grip to optimise clearing of However, particularly when your vehicle is
the mud and regain grip. heavily laden, it does not permit off-road
activities such as:
Every time the ignition is switched off, the - crossing and driving on terrain which
system automatically resets to the ESC mode. At the same time, the wheel with the most grip could damage the underbody or
is controlled in such a way as to transmit as tear off components (fuel pipe, fuel
much torque as possible. cooler, etc.), in particular as a result of
ESC OFF When moving, the system optimises wheel spin obstacles or stones,
to respond to the driver's requirements as fully - driving on terrain with steep gradients
This mode is only suitable for
5
as possible. and poor grip,
special conditions when moving off
- crossing a stream.
or at low speed.
When exceeding 30 mph (50 km/h),
the system automatically resets to Sand
the ESC mode.
This mode allows little spin on the
two driving wheels at the same time
Snow to allow the vehicle to move forward
and limit the risks of getting stuck in
This mode adapts to the conditions the sand.
of grip encountered for each of the
two front wheels when moving off.
Do not use the other modes on sand as
the vehicle may become stuck.
When moving, the system optimises wheel spin
to ensure the best acceleration possible with
the available traction.
Safety
Seat belts Rear seat belts (7 seat In row 3

version)
Front seat belts
The front seats are fitted with pyrotechnic
pretensioners and force limiters.
In row 2
The seat belt for the centre seat
in the front bench seat has no
pyrotechnic pretensioner.
The two seats are fitted with three-point inertia

reel seat belts.
Rear seat belts (5 seat Do not attach the seat belts to the stowing rings
version) marked with a red cross, as shown on the label.
Ensure that you attach the seat belts correctly
The rear seats are fitted with
to the rings provided for this purpose.
three-point inertia reel seat belts.
The three seats are fitted with three-point
inertia reel seat belts.
When folding the side seats or placing the
backrests in the table position, avoid trapping
the strap of the centre seat belt.
When handling the side seats (removing/
installing) or when accessing row 3, avoid
trapping the centre belt.
Ensure that the centre seat belt is rolled up
correctly in its recess in the roof.
Safety
The row 3 seat belts which are not in use can Fastening
be stored to clear the load space and to make
use of the load space cover easier.
Hook the spring hook into the location provided
on the rear pillar trim.
Height adjustment
F Pull the strap then insert the tongue in the

buckle.
5
F Check that the seat belt is fastened
correctly by pulling the strap.
Unfastening
F Press the red button on the buckle.
F Squeeze the control with the return and
slide the assembly on the driver's seat side
and on the individual passenger seat side.
Seat belt(s) not fastened
warning lamp
When the vehicle is started, this
The height of the seat belt for the
warning lamp comes on if a user at the
centre seat of the front bench seat
front has not fastened their seat belt.
cannot be adjusted.
The front passenger's seat
may be fitted with a presence
detector, in which case you
should not place any heavy items
on this seat, as this could trigger
the alert.
Safety
Advice
The driver must ensure that passengers use In order to be effective, a seat belt must: Recommendations for children
the seat belts correctly and that they are all - be tightened as close to the body as Use a suitable child seat if the passenger is
fastened before setting off. possible, less than 12 years old or shorter than one and
Wherever you are seated in the vehicle, - be pulled in front of you with a smooth a half metres.
always fasten your seat belt, even for short movement, checking that it does not twist, Never use the same seat belt to secure more
journeys. - be used to restrain only one person, than one person.
Do not interchange the seat belt buckles as - not show any signs of cuts or fraying, Never allow a child to travel on your lap.
they will not fulfil their role fully. - not be converted or modified to avoid For more information on Child seats, refer to
The seat belts are fitted with an inertia reel affecting its performance. the corresponding section.
permitting automatic adjustment of the length In accordance with current safety regulations,
of the strap to your size. The seat belt is for all repairs on your vehicle's seat belts, go
stowed automatically when not in use. to a qualified workshop with the skills and
Before and after use, ensure that the seat belt equipment needed, which a CITROËN dealer In the event of an impact
is reeled in correctly. is able to provide. Depending on the nature and seriousness
The lower part of the strap must be positioned Have your seat belts checked regularly by of the impact, the pyrotechnic device may
as low as possible on the pelvis. a CITROËN dealer or a qualified workshop, be deployed before and independently of the
The upper part must be positioned in the particularly if the straps show signs of airbags. Deployment of the pretensioners
hollow of the shoulder. damage. is accompanied by a slight discharge of
The inertia reels have a device for automatic Clean the seat belt straps with soapy water or harmless smoke and a noise, due to the
locking in the event of a collision, sudden a textile cleaning product, sold by CITROËN activation of the pyrotechnic cartridge
braking or if the vehicle turns over. You can dealers. incorporated in the system.
release the device by pulling the strap firmly After folding or moving a seat or rear bench In all cases, the airbag warning lamp comes
and then releasing it so that it reels in slightly. seat, ensure that the seat belt is positioned on.
and reeled in correctly. Following an impact, have the seat belts
system checked and, if necessary, replaced,
by a CITROËN dealer or a qualified
workshop.
Safety
If a collision occurs, the electronic detectors

Airbags record and analyse the front and side impacts
The passenger's front airbag must be
deactivated if a rearward facing child seat
General sustained in the impact detection zones:
is installed.
- in the event of violent impact, the airbags
are deployed instantly and help better
protect the occupants of the vehicle; Impact detection zones
immediately after the impact, the airbags
deflate rapidly in order not to hinder
the visibility or the possible exit of the
occupants,
- in the case of a minor or rear impact or in
certain roll-over conditions, the airbags
may not be deployed; the seat belt
alone contributes towards ensuring your
5
protection in these situations.
The seriousness of the collision depends on
the nature of the obstacle and the speed of the
vehicle at the moment of impact. A. Front impact zone.
B. Side impact zone.
The airbags do not operate when the

The deployment of an airbag is
ignition is switched off.
accompanied by a slight emission of
This equipment will only deploy once. If a
smoke and a noise, due to the detonation
second impact occurs (during the same or
of the pyrotechnic charge incorporated in
a subsequent accident), the airbag will not
the system.
be deployed again.
This smoke is not harmful, but sensitive
individuals may experience slight irritation.
The airbags have been designed to optimise
The detonation noise associated with the
the safety of the occupants in the event of a
deployment of an airbag may result in a
serious collision; they work in conjunction with
slight loss of hearing for a short time.
the force limiting seat belts.
Safety
Front airbags Operating fault Activation

If this warning lamp comes on, The lateral airbag is deployed unilaterally in
accompanied by an audible warning the event of a severe side impact covering all
and a message on the screen, contact or part of side impact zone B, perpendicular to
a CITROËN dealer or a qualified the longitudinal centreline of the vehicle in a
workshop to have the system checked. horizontal plane and directed from the outside
towards the inside of the vehicle.
The lateral airbag inflates between the front
If the two airbag warning lamps remain
occupant and the corresponding door panel.
on continuously, do not install a "rearward
facing" child seat, contact a CITROËN
These are incorporated in the centre of dealer or a qualified workshop.
the steering wheel for the driver and in the
dashboard for the front passenger(s). Operating fault
Lateral airbags If this warning lamp comes on in the
Activation This system protects the driver and front instrument panel, accompanied by
passenger in the event of a severe side impact an audible warning and a message
The airbags are deployed (except the
in order to limit the risk of injury to the thorax. on the screen, contact a CITROËN
passenger's front airbag if it is deactivated)
dealer or a qualified workshop to
in the event of a serious frontal impact to all
have the system checked. The
or part of the frontal impact zone A, in the
airbags may no longer be deployed
longitudinal centreline of the vehicle on a
in the event of a serious impact.
horizontal plane and directed from the front to
the rear of the vehicle. In the event of a minor impact or bump on
The front airbag inflates between the front the side of the vehicle or if the vehicle rolls
occupant of the vehicle and the dashboard, to over, the airbags may not be deployed.
cushion their forward movement.
Each lateral airbag is fitted in the front seat's

backrest frame, door side.
Safety
Curtain airbags
This system protects the driver and passengers

(with the exception of the centre seat in row
two) in the event of a severe side impact in
order to limit the risk of injury to the head.
Each curtain airbag is built into the pillars and
the upper passenger compartment area.
Activation
5
The curtain airbag is deployed at the same
time as the corresponding lateral airbag in the
event of a serious side impact applied to all or
part of the side impact zone B, perpendicular
to the longitudinal centreline of the vehicle on a
horizontal plane and directed from the outside
towards the inside of the vehicle.
The curtain airbag inflates between the front or
rear occupant of the vehicle and the windows.
Safety
Advice
For the airbags to be fully effective, Front airbags Curtain airbags
observe the safety recommendations Do not drive holding the steering wheel by its Do not fix or attach anything to the roof, as
below. spokes or resting your hands on the centre this could cause head injuries if the curtain
Adopt a normal and upright sitting position. part of the wheel. airbag is deployed.
Fasten your seat belt, ensuring it is positioned Passengers must not place their feet on the If fitted on your vehicle, do not remove the
correctly. dashboard. grab handles installed on the roof, they play a
Do not leave anything between the occupants Do not smoke as deployment of the airbags part in securing the curtain airbags.
and the airbags (a child, pet, object, etc.), nor can cause burns or the risk of injury from a
fix or attach anything close to the inflation cigarette or pipe.
trajectory of the airbags; this could cause Never remove or pierce the steering wheel or
injuries if they are deployed. hit it violently.
Never modify the original definition of your Do not fit or attach anything to the steering
vehicle, particularly in the area directly wheel or dashboard, this could cause injuries
around the airbags. if the airbags are deployed.
After an accident or if the vehicle has been
stolen or broken into, have the airbag systems
checked.
All work on the airbag systems must be Lateral airbags
carried out by a CITROËN dealer or a Use only approved covers on the seats,
qualified workshop. compatible with the deployment the lateral
Even if all of the precautions mentioned airbags. For information on the range of seat
are observed, a risk of injury or of minor covers suitable for your vehicle, you can
burns to the head, chest or arms when an contact a CITROËN dealer.
airbag is deployed cannot be ruled out. The Do not fix or attach anything to the seat
bag inflates almost instantly (within a few backrests (clothes, etc.) as this could cause
milliseconds) then deflates within the same injuries to the chest or arm if the lateral airbag
time discharging the hot gas via openings is deployed.
provided for this purpose. Do not sit with the upper part of the body any
nearer to the door than necessary.
Safety
General points relating to Child seat at the front Ensure that the seat belt is correctly
child seats "Rearward facing"
tensioned.
For child seats with a support leg, ensure
that this is in firm contact with the floor. If
The regulations on carrying children are
necessary, adjust the passenger seat.
specific to each country. Refer to the
legislation in force in your country.
When a "rearward facing" child seat is

installed on the front passenger seat, the
For maximum safety, please observe the
front passenger airbag must be deactivated.
following recommendations:
Otherwise the child could be seriously
- in accordance with European regulations,
injured or killed if the airbag is deployed.
all children under the age of 12 or less
Adjust the vehicle seat:
than one and a half metres tall must
5
- to the fully back position, with the backrest
travel in approved child seats suited to
upright for a seat without height adjuster,
their weight, on seats fitted with a seat belt
- to the fully back position and the highest
or ISOFIX mountings,
position, with the backrest upright for a seat
- statistically, the safest seats in your
with height adjuster.
vehicle for carrying children are the rear
seats,
Passenger seat in the fully back and
- a child weighing less than 9 kg must "Forward facing" highest position.
travel in the rearward facing position
both in the front and in the rear.
When a "forward facing" child seat is installed

on the front passenger seat, the passenger's
front airbag must remain active.
It is recommended that children travel on Adjust the vehicle seat:
the rear seats of your vehicle: - to the fully back position, with the backrest
- rearward facing up to the age of 3, upright for a seat without height adjuster,
- forward facing over the age of 3. - to the fully back position and the highest
position, with the backrest upright for a seat
with height adjuster.
89
Safety
Child seat at the rear "Forward facing" sufficient, remove these row 2 seats so that the
child seat or the child's legs do not touch the
seats in row 2.
"Rearward facing" A child seat with a support leg must never

be installed on a passenger seat in
row 3.
Deactivating the
When a "forward facing" child seat is installed passenger's front airbag
on a rear passenger seat, move the vehicle's
front seat forward and the backrest to an Never install a "rearward facing" child
upright position so that the legs of the child in restraining system on a seat protected by
the "forward facing" child seat do not touch the an activated front airbag. This can cause
When a "rearward facing" child seat is installed
vehicle's front seat. death or serious injury to the child.
on a rear passenger seat, move the vehicle's
front seat forward and straighten the backrest
so that the "rearward facing" child seat does Ensure that the seat belt is correctly
not touch the vehicle's front seat. tensioned.
For child seats with a support leg, ensure
that this is in firm contact with the floor.
Seats in row 3
When a child seat is installed on a row 3
passenger seat, place the backrests of the
outer seats and the central seat of row 2, The warning label, located on each side of the
located in front of the seat occupied by the passenger sun visor repeats this order.
child seat, in the table position, or if this is not
Safety
In line with current legislation, you will find this

To ensure your child's safety, it is
warning in all the required languages in the
essential to deactivate the passenger's
following tables.
front airbag when you install a rearward
facing child seat on the front passenger
seat. Otherwise, there is a risk of serious
Deactivating the or fatal injury to the child if the airbag is
passenger's front airbag deployed.
Reactivating the
passenger's front airbag
In the "OFF" position, the passenger’s front
5
airbag will not be deployed in the event of an
impact.
Only the passenger's front airbag can be
deactivated.
F With the ignition off, insert the key into the
passenger airbag deactivation switch.
F Turn it to the "OFF" position.
F Remove the key while keeping the switch in
this position.
As soon as you remove the child seat, turn
The passenger's front airbag the passenger’s front airbag switch to the ON
warning lamp in the dashboard position to reactivate the airbag and therefore
stays on throughout the deactivation ensure the safety of your passenger in the
period. event of an impact.
Safety
AR
НИКОГА НЕ инсталирайте детско столче на седалка с АКТИВИРАНА предна ВЪЗДУШНА ВЪЗГЛАВНИЦА. Това може да причини
BG
СМЪРТ или СЕРИОЗНО НАРАНЯВАНЕ на детето.
NIKDY neumisťujte dětské zádržné zařízení orientované směrem dozadu na sedadlo chráněné AKTIVOVANÝM čelním AIRBAGEM. Hrozí
CS
nebezpečí SMRTI DÍTĚTE nebo VÁŽNÉHO ZRANĚNÍ.
Brug ALDRIG en bagudvendt barnestol på et sæde, der er beskyttet af en AKTIV AIRBAG. BARNET risikerer at blive ALVORLIGT
DA
KVÆSTET eller DRÆBT.
Montieren Sie auf einem Sitz mit AKTIVIERTEM Front-Airbag NIEMALS einen Kindersitz oder eine Babyschale entgegen der Fahrtrichtung,
DE
das Kind könnte schwere oder sogar tödliche Verletzungen erleiden.
Μη χρησιμοποιείτε ΠΟΤΕ παιδικό κάθισμα με την πλάτη του προς το εμπρός μέρος του αυτοκινήτου, σε μια θέση που προστατεύεται από
EL
ΜΕΤΩΠΙΚΟ αερόσακο που είναι ΕΝΕΡΓΟΣ. Αυτό μπορεί να έχει σαν συνέπεια το ΘΑΝΑΤΟ ή το ΣΟΒΑΡΟ ΤΡΑΥΜΑΤΙΣΜΟ του ΠΑΙΔΙΟΥ
NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the
EN
CHILD can occur.
NO INSTALAR NUNCA un sistema de retención para niños de espaldas al sentido de la marcha en un asiento protegido mediante un
ES
AIRBAG frontal ACTIVADO, ya que podría causar lesiones GRAVES o incluso la MUERTE del niño.
Ärge MITTE KUNAGI paigaldage "seljaga sõidusuunas" lapseistet juhi kõrvalistmele, mille ESITURVAPADI on AKTIVEERITUD. Turvapadja
ET
avanemine võib last TÕSISELT või ELUOHTLIKULT vigastada.
ÄLÄ KOSKAAN aseta lapsen turvaistuinta selkä ajosuuntaan istuimelle, jonka edessä suojana on käyttöön aktivoitu TURVATYYNY. Sen
FI
laukeaminen voi aiheuttaa LAPSEN KUOLEMAN tai VAKAVAN LOUKKAANTUMISEN.
NE JAMAIS installer de système de retenue pour enfants faisant face vers l'arrière sur un siège protégé par un COUSSIN GONFLABLE
FR
frontal ACTIVÉ. Cela peut provoquer la MORT de l'ENFANT ou le BLESSER GRAVEMENT.
NIKADA ne postavljati dječju sjedalicu leđima u smjeru vožnje na sjedalo zaštićeno UKLJUČENIM prednjim ZRAČNIM JASTUKOM. To bi
HR
moglo uzrokovati SMRT ili TEŠKU OZLJEDU djeteta.
SOHA ne használjon menetiránynak háttal beszerelt gyermekülést AKTIVÁLT (BEKAPCSOLT) FRONTLÉGZSÁKKAL védett ülésen. Ez a
HU
gyermek HALÁLÁT vagy SÚLYOS SÉRÜLÉSÉT okozhatja.
NON installare MAI seggiolini per bambini posizionati in senso contrario a quello di marcia su un sedile protetto da un AIRBAG frontale
IT
ATTIVATO. Ciò potrebbe provocare la MORTE o FERITE GRAVI al bambino.
Safety
NIEKADA neįrenkite vaiko prilaikymo priemonės su atgal atgręžtu vaiku ant sėdynės, kuri saugoma VEIKIANČIOS priekinės ORO
LT
PAGALVĖS. Išsiskleidus oro pagalvei vaikas gali būti MIRTINAI arba SUNKIAI TRAUMUOTAS.
NEKAD NEuzstādiet uz aizmuguri vērstu bērnu sēdeklīti priekšējā pasažiera sēdvietā, kurā ir AKTIVIZĒTS priekšējais DROŠĪBAS GAISA
LV
SPILVENS. Tas var izraisīt BĒRNA NĀVI vai radīt NOPIETNUS IEVAINOJUMUS.
MT Qatt m’ghandek thalli tifel/tifla marbut f’siggu dahru lejn l-Airbag attiva, ghaliex tista’ tikkawza korriment serju jew anke mewt lit-tifel/tifla
Plaats NOOIT een kinderzitje met de rug in de rijrichting op een zitplaats waarvan de AIRBAG is INGESCHAKELD. Bij het afgaan van de
NL
airbag kan het KIND LEVENSGEVAARLIJK GEWOND RAKEN
Installer ALDRI et barnesete med ryggen mot kjøreretningen i et sete som er beskyttet med en frontal AKTIVERT KOLLISJONSPUTE,
NO
BARNET risikerer å bli DREPT eller HARDT SKADET.
NIGDY nie instalować fotelika dziecięcego w pozycji "tyłem do kierunku jazdy" na siedzeniu wyposażonym w CZOŁOWĄ PODUSZKĘ
PL POWIETRZNĄ w stanie AKTYWNYM. Może to doprowadzić do ŚMIERCI DZIECKA lub spowodować u niego POWAŻNE OBRAŻENIA
CIAŁA.
PT
RO
NUNCA instale um sistema de retenção para crianças de costas para a estrada num banco protegido por um AIRBAG frontal ACTIVADO.
Esta instalação poderá provocar FERIMENTOS GRAVES ou a MORTE da CRIANÇA.
Nu instalati NICIODATA un sistem de retinere pentru copii, dispus cu spatele in directia de mers, pe un loc din vehicul protejat cu AIRBAG
5
frontal ACTIVAT. Aceasta ar putea provoca MOARTEA COPILULUI sau RANIREA lui GRAVA.
ВО ВСЕХ СЛУЧАЯХ ЗАПРЕЩАЕТСЯ использовать обращенное назад детское удерживающее устройство на сиденье,
RU защищенном ФУНКЦИОНИРУЮЩЕЙ ПОДУШКОЙ БЕЗОПАСНОСТИ, установленной перед этим сиденьем. Это может привести к
ГИБЕЛИ РЕБЕНКА или НАНЕСЕНИЮ ЕМУ СЕРЬЕЗНЫХ ТЕЛЕСНЫХ ПОВРЕЖДЕНИЙ
NIKDY neinštalujte detské zádržné zariadenie orientované smerom dozadu na sedadlo chránené AKTIVOVANÝM čelným AIRBAGOM.
SK
Mohlo by dôjsť k SMRTEĽNÉMU alebo VÁŽNEMU PORANENIU DIEŤAŤA.
NIKOLI ne nameščajte otroškega sedeža s hrbtom v smeri vožnje, če je VARNOSTNA BLAZINA pred sprednjim sopotnikovim sedežem
SL
AKTIVIRANA. Takšna namestitev lahko povzroči SMRT OTROKA ali HUDE POŠKODBE.
NIKADA ne koristite dečje sedište koje se okreće unazad na sedištu zaštićenim AKTIVNIM VAZDUŠNIM JASTUKOM ispred njega, jer mogu
SR
nastupiti SMRT ili OZBILJNA POVREDA DETETA.
Passagerarkrockkudden fram MÅSTE vara avaktiverad om en bakåtvänd bilbarnstol installeras på denna plats. Annars riskerar barnet att
SV
DÖDAS eller SKADAS ALLVARLIGT.
KESİNLKLE HAVA YASTIĞI AKTİF olan ön koltuğa yüzü arkaya dönük bir çocuk koltuğu yerleştirmeyiniz. Bu ÇOCUĞUN ÖLMESİNE veya
TR
ÇOK AĞIR YARALANMASINA sebep olabilir.
Safety
Recommended child Groups 2 and 3: from 15 to 36 kg

seats
Approved range of recommended child seats
which are secured using a three-point seat
belt.
Group 0+: from birth to 13 kg

L5
"RÖMER KIDFIX"
Can be fitted to the vehicle's ISOFIX
mountings.
The child is restrained by the seat belt. Do not place the support leg on the
storage compartment cover, as it could
break during a violent impact. Where the
L1 adjustments of the support leg allow it, we
"RÖMER Baby-Safe Plus" suggest two other installation options.
Installed in the rearward facing position. Seats with a support leg
At the bottom of the storage compartment

Groups 2 and 3: from 15 to 36 kg
Care must be taken when installing a child seat
with a support leg in the vehicle. In particular,
you must check for the presence of a storage
compartment below the rear seat footwells.
The centre rear seat does not have a storage
compartment below the footwell. You can
therefore easily install a child seat with a
L4 support leg there, whether installed with
"Klippan Optima" ISOFIX mountings or the three-point seat belt.
From 22 kg (approximately 6 years), the
booster is used on its own.
Safety
If the support leg is long enough, you can

If you cannot position the support leg as
adjust it so that it is in contact with the bottom
described above, you must not fit a child
of the storage compartment. Remove all
seat with a support leg on this seat.
objects from the compartment before installing
the support leg.
Away from the storage
compartment area
Locations for child seats
secured using a seat belt
In accordance with European regulations,
this table indicates the options for installing
5
child seats secured using the seat belt and
universally approved (a) in relation to the weight
of the child and the seat in the vehicle.
If the support leg is long enough and can be

angled sufficiently (always respecting the
recommendations given in the child seat
installation instructions), you can position
the support leg in such a way that it is in
contact with the floor away from the storage
compartment area. Consider using the
longitudinal adjustment of the rear seat or front
seat to obtain a satisfactory position for the
support leg away from the storage area.
Safety
Weight of the child and indicative age
Under 13 kg
9-18 kg 15-25 kg 22-36 kg
Seat(s) (groups 0 (b) and
(group 1) (group 2) (group 3)
0+)
From 1 to about From 3 to about From 6 to about
Up to about 1 year
3 years old 6 years old 10 years old
old
Row 1 (c) (d) Passenger seat U U U U
Outer seats U* U* U U
Row 2 (e)
(5 and 7 seats)
Centre seat U U U U
Row 3 (f) (g)

All seats U** U** U U
(7 seats)
* A child seat with a support leg must never be installed on a row 2 outer rear passenger seat unless you are able to install it in accordance with the
recommendations in the section "Installing child seats with a support leg".
** A child seat with a support leg must never be installed on a rear passenger seat in row 3.
Safety
Weight of the child and indicative age
Under 13 kg
9-18 kg 15-25 kg 22-36 kg
Seat position (groups 0 (b) and
(group 1) (group 2) (group 3)
0+)
From 1 to about From 3 to about From 6 to about
Up to about 1 year
3 years old 6 years old 10 years old
old
Individual seat U U U U
Row 1 (c) (d)

Bench seat, outer
seat
U U U U
5
Bench seat, centre
U U U U
seat (e)
U: Seat suitable for the installation of a (b) Group 0: from birth to 10 kg. Infant car (c) Refer to the current legislation in your
child seat secured using the seat belt seats and "car cots" cannot be installed country before installing your child on
and universally approved for "rearward on the front passenger seat or in row 3. this seat.
facing" and/or "forward facing" use. When installed in row 2, they may prevent
the use of one or more seats in that row.
(a) Universal child seat: child seat that can
be installed in all vehicles using the seat
belt.
Safety
(d) When a "rearward facing" child seat is (f) Place the backrests of the outer seats
installed on the front passenger seat, and the central seat of row 2, located in
the passenger's front airbag must be front of the seat occupied by the child
deactivated without fail. Otherwise, the seat, in the table position, or if this is not
child risks being seriously injured or sufficient, remove these row 2 seats so
killed if the airbag were to inflate. that the child seat or the child's legs do
When a "forward facing" child seat is not touch the row 2 seats.
installed on the front passenger seat,
the passenger's front airbag must remain
active. (g) If the seats in row 3 are occupied, do not - Two front rings A, located between the
leave a child seat installed on the foldable vehicle seat backrest and cushion, indicated
(e) row 2 seat, to ensure ease of access to by an "ISOFIX" marking,
row 3.
When installing a child seat at the rear,

in either a forward or rearward facing
position, move the seat in front forwards,
then straighten the backrest to allow Remove and stow the head restraint
enough space for the child seat and for before installing a child seat with backrest
the child's legs. on a passenger seat.
Refit the head restraint once the child seat
(e) has been removed.
- A rear ring B, on the back of the vehicle's

seat backrest, for attaching the upper strap
The "RÖMER Baby-Safe Plus" child seat
cannot be installed on this seat. ISOFIX mountings called the Top Tether.
The Top Tether secures the upper strap of child

seats that have them. In case of frontal impact,
Your vehicle has been approved in accordance with this device limits the tilting of the child seat
the latest ISOFIX regulation. forward.
The mountings comprise three rings for each seat: This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
Safety
The ISOFIX child seats are fitted with two

Recommended ISOFIX seat Locations of ISOFIX child
latches which are secured on the two front
rings A.
seats
Some also have an upper strap which is In line with European regulations, this table
RÖMER Duo Plus ISOFIX
attached to rear ring B. indicates the options for installing ISOFIX child
(size category: B1)
seats on the vehicle seats fitted with ISOFIX
To secure the child seat to the Top Tether: Group 1: 9 to 18 kg mountings.
- remove and stow the head restraint before In the case of the universal and semi-universal
installing a child seat on this seat (refit it ISOFIX child seats, the child seat's ISOFIX size
once the child seat has been removed), category, designated by a letter from A to G, is
- run the strap of the child seat behind the top indicated on the child seat next to the ISOFIX
of the seat backrest, centring it between the logo.
holes for the head restraint rods,
5
- fix the hook on the end of the upper strap to
rear ring B,
- tighten the upper strap.
Installed only in the "forward facing" position.

Attaches to rings A and ring B, referred to as
The incorrect installation of a child seat in the Top Tether, using an upper strap.
a vehicle compromises the protection of 3 seat body angles: sitting, reclining and lying
the child in the event of an accident. down.
Strictly follow the fitting instructions This child seat can also be used on seats
provided in the installation guide supplied not equipped with ISOFIX mountings. In
with the child seat. this case, it must be secured to the vehicle's
seat by the three-point seat belt. Follow the
instructions on how to install the child
seat provided in the seat manufacturer's
For information on the possibilities for
installation guide.
installing ISOFIX child seats in your
vehicle, refer to the locations table.
Safety
Weight of the child/indicative age
Under 10 kg
Under 10 kg (group 0) 9-18 kg
(group 0) Under 13 kg (group 1)
Up to about 6 months (group 0+) From about 1 to 3 years old
Up to about 1 year
Type of ISOFIX child seat Carry-cot rearward facing rearward facing forward facing
ISOFIX size category F G C D E C D A B B1
Outer seats** IL-SU IL-SU IL-SU IUF, IL-SU

Row 2
(5 and 7* seats)
Centre seat Non-ISOFIX
Row 3
All seats Non-ISOFIX
(7 seats)
* In the seven-seat version, the three seats in IUF: seat suitable for the installation of
Remove and stow the head restraint
row 2 must be present when child seats are an ISOFIX Universal seat, Forward
before installing a child seat with backrest
being installed. facing, secured using the upper
on a passenger seat.
strap.
** A child seat with a support leg must never IL-SU: seat suitable for the installation of an Refit the head restraint once the child seat
be installed on an outer rear passenger seat ISOFIX Semi-Universal seat which has been removed.
in row 2, unless you are able to install it in is either:
accordance with the recommendations in the - "rearward facing" fitted with an
section "Installing child seats with a support upper strap or a support leg,
leg". - "forward facing" fitted with a
support leg,
- a carry-cot fitted with an upper
strap or a support leg.
Safety
Instructions for child seats

The incorrect installation of a child seat in a When a child seat is installed in row 3, place Installing a booster cushion
vehicle compromises the child's protection in the backrests of the outer seats and the The chest part of the seat belt must be
the event of an accident. centre seat of row 2 in the table position, or positioned on the child's shoulder without
Ensure that there is no seat belt or seat belt remove these row 2 seats so that the child touching the neck.
buckle under the child seat, as this could seat or the child's legs do not touch the row Ensure that the lap part of the seat belt
destabilise it. 2 seats. passes correctly over the child's thighs.
Remember to fasten the seat belts or the For optimal installation of the "forward facing" CITROËN recommends using a booster seat
child seat harnesses keeping the slack child seat, check that its backrest is as close with a backrest, equipped with a belt guide at
relative to the child's body to a minimum, as possible to the backrest of the vehicle shoulder level.
even for short journeys. seat, if possible in contact with it. As a safety precaution, do not leave:
When installing a child seat using the seat The head restraint must be removed before - a child or children alone and unattended in
5
belt, ensure that the seat belt is tightened installing a child seat with a backrest on a a vehicle,
correctly on the child seat and that it secures passenger seat. - a child or an animal in a vehicle which
the child seat firmly on the seat of your Ensure that the head restraint is stored or is exposed to the sun, with the windows
vehicle. If your passenger seat is adjustable, attached securely to prevent it from being closed,
move it forwards if necessary. thrown around the vehicle in the event of - the keys within reach of children inside the
At the rear, always leave sufficient space sharp braking. vehicle.
between the front seat and: Refit the head restraint once the child seat To prevent accidental opening of the doors,
- a rearward facing child seat, has been removed. use the "Child lock" system.
- the feet of a child seated in a forward Take care not to open the rear windows by
facing child seat. more than one third.
To do this, move the front seat forwards Children in front To protect young children from the rays of the
and, if necessary, move its backrest into the The legislation on carrying children on the sun, fit side blinds on the rear windows.
upright position. front passenger seat is specific to each
country. Refer to the legislation in force in
your country.
Deactivate the passenger’s front airbag when
a rearward facing child seat is installed on
the front passenger seat. Otherwise, the child
may be seriously injured or killed if the airbag
is deployed.
Safety
Child lock Electric
This prevents the sliding side doors from being

opened from inside.
Manual
F With the ignition on, press this button.
Indicator lamp on = child lock active.
This system is independent of the central

locking control.
Always remove the key from the ignition

when leaving the vehicle, even for a short
A label shows you the position of the lever and time.
the child lock status. It is recommended that you check the
F Open completely, while passing the point of activation of child lock each time you
resistance. switch on the ignition.
F Tilt the lever located on the rear section of In the event of a violent impact, the child
the door. lock is disabled automatically.
Driving
If you are obliged to drive through water:

Driving recommendations - check that the depth of water does not
Never leave a vehicle unsupervised with
the engine running. If you have to leave
Observe the Highway Code and remain vigilant exceed 15 cm, taking account of waves that
your vehicle with the engine running, apply
whatever the traffic conditions. might be generated by other users,
the parking brake and put the gearbox into
Pay close attention to the traffic and keep your - deactivate the Stop & Start function,
neutral or position N or P, depending on
hands on the wheel so that you are ready to - drive as slowly as possible without stalling.
the type of gearbox.
react at any time to any eventuality. Under no circumstances exceed 6 mph
As a safety measure, the driver should only (10 km/h),
carry out any operations that require close - do not stop and do not switch off the engine.
attention when the vehicle is stationary. On leaving the flooded road, as soon as In case of towing
On a long journey, a break every two hours is circumstances allow, make several light brake
strongly recommended. applications to dry the brake discs and pads.
Driving with a trailer places greater
In bad weather, drive smoothly, anticipate the If in doubt about the state of your vehicle,
demands on the towing vehicle and
need to brake and increase the safety distance. contact a CITROËN dealer or a qualified
requires extra care from the driver.
workshop.
Side wind
Driving on flooded roads

We strongly advise against driving on flooded
Important!
F Take into account the increased sensitivity
to wind.
Cooling
6
roads, as this could cause serious damage Never drive with the parking brake applied
to the engine or gearbox, as well as to the Towing a trailer on a slope increases the
– risk of overheating and damage to the
electrical systems of your vehicle. temperature of the coolant.
braking system!
As the fan is electrically controlled, its cooling
Do not park and do not run the engine
capacity is not dependent on the engine speed.
with the vehicle stationary, in areas where
F To lower the engine speed, reduce your
substances and combustible materials
speed.
(dry grass, leaves, etc.) can come into
The maximum towable load on an incline
contact with the hot exhaust system – Risk
depends on the gradient and the exterior
of fire!
temperature.
In all cases, keep a check on the coolant
temperature.
Driving
In some cases of particularly demanding use Starting position.

For more information on Headlamp
(when towing the maximum load on a steep The starter is operated. the engine turns over,
beam height adjustment, refer to the
gradient in high temperatures), the engine release the key.
power is automatically limited. In such a case,
the air conditioning is automatically switched STOP position: anti-theft.
off to increase the available engine power. The ignition is off. Turn the steering wheel until
The rear parking sensors will be the steering column locks. Remove the key.
deactivated automatically to avoid the
audible signal if a genuine CITROËN
F If this warning lamp and the If this warning lamp comes, a door
towbar is used. or the bonnet is not closed correctly.
STOP warning lamp come on,
stop the vehicle and switch off Please check!
the engine as soon as possible.
Diesel engines
New vehicle Starting and stopping If the temperature is high enough,

the warning lamp comes on for
Do not pull a trailer before having driven at
less than a second, you can start
least 600 miles (1,000 kilometres).
without waiting.
Braking In cold weather, wait for this warning lamp to go

off then operate the starter (starting position)
Towing a trailer increases the braking distance. until the engine starts.
To avoid overheating of the brakes, the use of
engine braking is recommended.
When switching off the ignition, let the
engine run for a few seconds to allow the
Tyres turbocharger (diesel engine) to return to
idle.
F Check the tyre pressures of the towing
Do not press the accelerator when
vehicle and of the trailer, observing the
switching off the ignition.
recommended pressures.
There is no need to engage a gear after
Running and accessories position.
Lighting parking the vehicle.
To unlock the steering, turn the steering wheel
F Check the electrical lighting and signalling gently while turning the key, without forcing. In
on the trailer and the headlamp beam height this position, certain accessories can be used.
of your vehicle.
Driving
Electronic engine When you leave the vehicle, check Apply the parking brake only when the
immobiliser that the lights are off and do not leave
valuables visible.
vehicle is stationary.
In the exceptional case of use of the
All of the keys contain an electronic immobiliser As a safety precaution (with children on parking brake when the vehicle is moving,
device. board), remove the key from the ignition apply the brake by pulling gently to avoid
This device locks the engine supply system. when leaving the vehicle, even for a short locking the rear wheels (risk of skidding).
It is activated automatically when the key is time.
removed from the ignition.
When the ignition switch is turned on, a
dialogue is set up between the key and the Parking brake
electronic immobiliser.
Release
The metal part of the key must be correctly F Pull the lever up slightly and press the
unfolded to ensure a good connection. button to release the parking brake lever.
In case of lost keys

When the vehicle is being driven,
See a CITROËN dealer with the vehicle
this warning lamp coming on
6
registration card and your ID.
A CITROËN dealer can retrieve the key
Application indicates that the parking brake
is still on or has not been fully
code and the transponder code to order the F Pull the parking brake lever up to immobilise released.
replacement key. your vehicle.
F Check that the parking brake is applied Manual gearbox
firmly before leaving the vehicle.
To change gear easily, always press the clutch
pedal fully.
When parking on a slope, turn your To prevent the mat from becoming caught
wheels towards the kerb and pull the under the pedal:
parking brake lever up. - ensure that the mat is positioned and
There is no advantage in engaging a gear secured to the floor correctly,
after parking the vehicle, particularly if the - never fit one mat on top of another.
vehicle is loaded. When driving, avoid leaving your hand on the
gear knob as the force exerted, even if slight,
may wear the internal components of the
gearbox over time.
Driving
Engaging reverse gear - Automated mode: selector in position A.

The movement must be carried out slowly
- Manual mode: selector in position M.
to reduce noise.
To engage reverse gear, wait until the
vehicle is stationary. For safety:
Position N can only be released if the
brake pedal is pressed.
Engaging 5th or 6th gear The change from position A (driving in
automated mode) to position M (driving in
manual mode) or vice versa can be done
F To fully engage the gear, move the gear at any time. The indicator lamp A in the
lever all the way to the right. instrument panel goes off.
6-speed electronic
Starting the vehicle
gearbox
F To start the vehicle, the selector must be in
Mode selection position N.
F Press firmly on the brake pedal.
F Start the engine.
F With the engine running, place the selector
on R, A or M as required.
F Release the brake pedal and press the
accelerator pedal to move off.
If the selector is not in position N, and/or if the
brake pedal is not pressed, the engine will not
start; begin the above procedure again.
Reverse gear
F In 6-speed configuration. lift the collar under Engaging reverse gear
the knob.
Driving
F Move the gear selector to R. Changing gear Acceleration

Only engage it when the vehicle is
stationary. For optimum acceleration (for example, when
overtaking another vehicle), simply press
Neutral the accelerator pedal firmly past the point of
Engaging neutral resistance at the end of its travel.
F Press the "+" paddle to change up.
F Press the "-" paddle to change down.
F Move the gear selector to N. If the vehicle Vehicle stationary, engine

is moving, do not select this position even - When the vehicle is statinary, or at low running
momentarily. speed (approaching a stop, for example), In the event of a prolonged stop with the engine
the gearbox changes down automatically running, the gearbox automatically returns to
Automatic mode into 1st gear. neutral N.
Switching to automatic mode - It is not necessary to completely release the
accelerator pedal during gear changes.
- The gear change commands are carried out Stopping the vehicle
6
only if the engine speed permits.
F Move the gear selector to A. F Before stopping the engine, move the gear
- For safety reasons, depending on the
The gearbox then operates in automatic mode, selector to position N.
engine speed, downward gear changes may
without any intervention on your part. In all cases, the parking brake must be applied.
be made automatically.
It continuously selects the most suitable gear Ensure that the parking brake warning lamp
taking account of: lights up on the instrument panel.
- style of driving,
- road profile,
- optimisation of fuel consumption.
Before doing any work under the bonnet
If the engine speed is high (sharp ensure that the gear selector is in
acceleration), the next gear will not be neutral N.
Manual mode
engaged without the driver changing gear
Switching to manual mode manually.
F Move the gear selector to M.
Driving
The information appears in the instrument Operation

Gear shift indicator panel in the form of an arrow. It may be
accompanied by a recommended gear. Going into engine STOP mode
This system helps reduce fuel consumption by
recommending the most appropriate gear. The system adapts its gear shift The "ECO" indicator lamp in the
With an electronic gearbox, the system is active recommendation according to the driving instrument panel comes on and the
only in manual mode. conditions (slope, load, etc.) and the engine goes into standby:
driver’s requirements (power, acceleration,
braking, etc.). - with a manual gearbox, at a speed below
Depending on the driving situation and your
The system never suggests: 12 mph (20 km/h) (depending on version),
vehicle's equipment, the system may advise
- engaging first gear, when you move the gear lever into neutral
you to skip one (or several) gear(s). You can
- engaging reverse gear. and release the clutch pedal.
follow this instruction without engaging the
- with a 6-speed electronic gearbox,
intermediate gears.
when stationary or at a speed below 5 mph
Gear shift recommendations are only optional.
(8 km/h), when you press the brake pedal or
In fact, the road configuration, the traffic
move the gear selector into N position.
density and safety remain the determining
factors when choosing the best gear. The driver
Stop & Start
remains responsible for deciding whether or not The Stop & Start system puts the engine
to follow this advice. temporarily into standby – STOP mode – during
If your vehicle is so equipped, a time counter
This function cannot be deactivated. stops in the traffic (red lights, traffic jams, etc.).
calculates the total time spent in STOP mode
The engine restarts automatically – START
during a journey. It is reset to zero every time
mode – as soon as you want to move off.
the ignition is switched on using the key.
The restart takes place instantly, quickly and
silently.
Perfect for urban use, the Stop & Start system
reduces fuel consumption and exhaust
emissions as well as the noise level when
stationary.
Driving
- some special conditions (battery charge,

With a 6-speed electronic gearbox, for With a manual gearbox in STOP mode, if
engine temperature, braking assistance,
your convenience when parking, the a gear is engaged without fully pressing
ambient temperature, etc.) are present
STOP mode is not available for the few the clutch pedal, a warning lamp comes
which require the engine to be running to
seconds that follow disengagement of on or an alert message is displayed asking
assure control of the system.
reverse gear. you to press the clutch pedal to restart the
The Stop & Start system does not affect engine.
the vehicle's functions, such as, for In this case, the "ECO" indicator
example, braking, power steering, etc. lamp flashes for a few seconds then
goes off.
Special cases: START mode
This operation is perfectly normal. activated automatically
As a safety measure or to maintain comfort
Never refuel with the engine in STOP
Going into engine levels in the vehicle, START mode is activated
mode; you must switch off the ignition
START mode automatically when:
using the key.
- you open the driver's door,
The "ECO" indicator lamp goes off - you unfasten the driver's seat belt,
and the engine restarts: - the speed of the vehicle exceeds 15 mph
6
(25 km/h) with a manual gearbox or 7 mph
Special cases: STOP mode not
- with a manual gearbox, when you fully (11 km/h) with an electronic 6-speed
available
press the clutch pedal, gearbox,
STOP mode is not triggered when: - with a 6-speed electronic gearbox - some special conditions (battery charge,
- the vehicle is on a steep slope (uphill or • gear lever in position A or M, when you engine temperature, braking assistance,
downhill), release the brake pedal, ambient temperature, etc.) are present
- the driver's door is open, • or gear lever in position N and the brake which require the engine to be running to
- the driver's seat belt is not fastened, pedal released, when you move the gear assure control of the system or vehicle.
- the vehicle has not exceeded 6 mph selector to position A or M,
(10 km/h) since the last engine start using • or when you engage reverse gear.
the key, In this case, the "ECO" indicator
- the engine is needed to maintain a lamp flashes for a few seconds then
comfortable temperature in the passenger goes off.
compartment,
This operation is perfectly normal.
- demisting is on,
Driving
Manual deactivation The system is reactivated automatically at

every new start using the key.
In certain circumstances, such as the need
to maintain a comfortable temperature in the
passenger compartment, it may be preferable Operating fault
to deactivate the Stop & Start system.
The Stop & Start system requires a
The system can be deactivated at any time,
12 V battery of specific technology and
once the ignition is switched on.
specification. All work on this type of
battery must be carried out only by a
CITROËN dealer or a qualified workshop.
Fitting a battery not approved by
CITROËN introduces the risk of
malfunction of the system.
For more information on the battery, refer
to the corresponding section.
In the event of a malfunction with the system,
the ECO OFF switch indicator lamp flashes,
F At any time, press the "ECO OFF" switch to
then comes on continuously.
deactivate the system.
Have it checked by a CITROËN dealer or a
This is confirmed by the switch indicator lamp Opening the bonnet
qualified workshop.
coming on, accompanied by a message on the Before doing anything under the bonnet,
If a fault occurs in STOP mode, the vehicle
screen. deactivate the Stop & Start system to
may stall. All of the instrument panel warning
avoid the risk of injury related to an
lamps come on. It is then necessary to switch
If the system has been deactivated automatic change to START mode.
the ignition off and to restart the engine using
in STOP mode, the engine restarts the key.
immediately. Driving on flooded roads
Before driving in a flooded area, it is
Manual reactivation strongly recommended that you deactivate
the Stop & Start system.
F Press the ECO OFF switch again. For more information on Driving
The system is active again; this is confirmed recommendations, particularly on flooded
by the switch indicator lamp going off and a roads, refer to the corresponding section.
message in the instrument panel.
Driving
Hill start assist Operation Do not leave the vehicle while it is being
held in the hill start assist phase.
This system keeps your vehicle briefly
If you need to get out of the vehicle with
stationary (for approximately 2 seconds) when
the engine running, apply the parking
making a hill start, while you transfer your foot
brake manually then ensure that the
from the brake pedal to the accelerator pedal.
parking brake warning lamp is on.
This system (also called HHC – Hill Hold
Control), integrated with the dynamic stability
control system, is activated in the following
conditions: Hill start assist is deactivated in the following
- the vehicle must be stationary, engine situations:
running, foot on the brake, - when the clutch pedal is released,
- the gradient of the road must be steeper - when the parking brake is applied,
than 5%, - when the engine is switched off,
- uphill, the gearbox must be in neutral or in a - if the engine stalls.
gear other than reverse,
- downhill, reverse gear must be engaged.
With the brake pedal and clutch pedal pressed,

Operating fault
If a malfunction of the system
occurs, this warning lamp comes on
6
from the time you release the brake pedal, accompanied by an audible signal
The hill start assist system is a driving without using the parking brake, you have and confirmed by a message in
aid. It is not an automatic vehicle parking approximately 2 seconds to move off before the the screen. Have it checked by a
function or an automatic parking brake. vehicle starts to roll back. CITROËN dealer or by a qualified
workshop.
During the moving off phase, the function is
deactivated automatically, gradually releasing
the braking pressure. During this phase,
it is possible to perceive the typical noise
of mechanical brake release signalling the
imminent movement of the vehicle.
Driving
Under-inflation detection The tyre pressure specifications for your

- In the event of a puncture, use the
temporary puncture repair kit or the spare
vehicle can be found on the tyre pressure
This system automatically monitors the tyre wheel (depending on equipment).
label.
pressure while driving. or
Tyre pressure should be checked when
The system continuously monitors the - if you have a compressor, such as the one
the tyres are "cold" (vehicle stopped for
pressures of the four tyres, as soon as the in the temporary puncture repair kit, check
1 hour or after a journey of less than
vehicle is moving. the pressures of the four tyres when cold,
6 miles (10 km) at moderate speeds).
A pressure sensor is located in the valve of or
Otherwise, add 0.3 bar (30 kPa) to the
each tyre (except the spare wheel). - if it is not possible to make this check
values indicated on the label.
The system triggers an alert as soon as it immediately, drive carefully at reduced
For more information on Identification
detects a drop in the pressure of one or more speed.
markings, including the tyre pressure
tyres. label, refer to the corresponding section.
The loss of pressure detected does not

This system does not eliminate the need always cause visible bulging of the tyre.
to check the tyre pressures (including Do not rely on a simple visual check.
the spare wheel) every month as well as
before a long journey.
Under-inflation alert
Driving with under-inflated tyres impairs This is indicated by continuous
handling, extends braking distances and illumination of this warning lamp, The alert continues until the tyre or tyres
causes early tyre wear, particularly in an audible signal and, depending concerned are reinflated, repaired or
adverse conditions (heavy loads, high on equipment, the display of a replaced.
speeds, long journeys). message. The spare wheel (space-saver or a steel
rim type) does not have a sensor.
In the event of a problem with one of the tyres,
depending on equipment, the symbol or the
message appears to identify it.
Driving with under-inflated tyres - Reduce speed immediately, avoid excessive
increases fuel consumption. steering movements and sudden braking.
- Stop as soon as it is safe to do so.
Driving
Operating fault The system monitors the pressure in all four

The inflation pressures specified for your
tyres, as soon as the vehicle is moving.
vehicle can be found on the tyre pressure
It compares the information given by the
label.
The flashing and then fixed wheel speed sensors with reference values,
For more information on the identification
illumination of this under-inflation which must be reinitialised after every tyre
markings, refer to the corresponding
warning lamp accompanied by the pressure adjustment or wheel change.
section.
illumination of the Service warning The system triggers an alert once a drop in
Tyre pressures must be checked "cold"
lamp, and depending on equipment, pressure is detected in one or more tyres.
(vehicle stopped for 1 hour or after a
the display of a message indicates a
journey of less than 6 miles (10 km)
fault with the system.
travelled at a moderate speed).
Otherwise (when hot), add 0.3 bar to the
In this case, the pressure in the tyres is no
pressures shown on the label.
longer monitored.
The under-inflation detection system does

This alert is also displayed when one or
not replace the need for vigilance on the
more wheels are not fitted with a sensor
part of the driver.
(for example, a space-saver or steel spare
This system does not eliminate the need
6
wheel).
to check the tyre inflation pressures Under-inflation alert
(including the spare) every month and
Go to a CITROËN dealer or a qualified before a long journey. This is indicated by continuous
workshop to have the system checked or, Driving with under-inflated tyres impairs illumination of the warning lamp, an
following the repair of a puncture, to have the handling, extends braking distances and audible signal and, depending on
original wheel, equipped with a sensor, refitted. causes early tyre wear, particularly in the equipment installed, a message
adverse conditions (heavy loads, high displayed on the screen.
Tyre under-inflation speeds, long journeys).

F Reduce speed immediately, avoid excessive
detection with steering movements and sudden braking.
F Stop the vehicle as soon as it is safe to do
reinitialisation so.
Driving with under-inflated tyres increases

fuel consumption.
System which automatically checks the
pressures of the tyres while driving.
Driving
The loss of pressure detected does not Before reinitialising the system, ensure
Screen C
always cause visible bulging of the tyre. that the pressures of the four tyres are F Press the MENU button to access the main
Do not satisfy yourself with just a visual correct for the use of the vehicle and in menu.
check. line with the recommendations on the tyre F Press the "5" or "6" button to select the
pressure label. "Personalisation-configuration" menu,
The under-inflation alert can only be relied then confirm by pressing the OK button.
F If you have a compressor, such as the one on if the system has been reinitialised F Press the "5" or "6" button to select the
in the temporary puncture repair kit, check with all four tyres inflated to the correct "Define the vehicle parameters" menu,
the pressures of the four tyres when cold. pressures. then confirm by pressing the OK button.
F If it is not possible to make this check The under-inflation detection system F Press the "5" or "6" button to select
immediately, drive carefully at reduced does not give a warning if a pressure is the "Tyre pressures" menu, then the
speed. incorrect at the time of reinitialisation. "Reinitialisation" menu, then confirm
or by pressing the OK button. A message
F In case of a puncture, use the temporary tyre confirms the reinitialisation.
repair kit or the spare wheel (depending on
The system must be reinitialised with the
equipment).
ignition on and the vehicle stationary:
Touch screen tablet
- in the vehicle configuration menu for F Press the MENU button.
vehicles fitted with a display screen, F Select the "Driving" menu.
The alert is kept active until the system is - via the button on the dashboard for vehicles F In the secondary page, select " Under-
reinitialised. without a screen. inflation initialisation".
A message is displayed to confirm the
Screen A reinitialisation request.
F Press the MENU button for access to the F Select "Yes" or "No", then confirm.
Reinitialisation main menu. A message confirms the reinitialisation.
The system must be reinitialised after any F Press the "5" or "6" button to select the
adjustment to the pressures of one or more "Veh config" menu, then confirm by
tyres, and after changing one or more wheels. pressing the OK button.
F Press the "5" or "6" button to select the
"Reinit inflat" menu, then confirm by
pressing the OK button.
A message is displayed to confirm the request.
F Confirm by pressing the OK button.
Driving
Dashboard button Operating fault
The flashing and then constant illumination of

the under-inflation warning lamp accompanied
by illumination of the Service warning lamp
1. Speed limiter mode Selection/Off.
F Hold this button down. indicates a fault in the system.
Reinitialisation is confirmed by a high-pitched In this case, under-inflation monitoring of the 2. Decreases the set value.
audible signal. tyres is no longer provided. 3. Increases the set value.
A low-pitched audible signal indicates that Have the system checked by a CITROËN 4. Speed limiter On/Pause.
the reinitialisation operation has not been dealer or a qualified workshop.
successful. The speed setting is selected with the engine
The new pressure parameters saved are running, regardless of being stationary or
treated as reference values by the system. After doing anything to the system, the in motion. The minimum speed that can be
6
pressures of the four tyres must be programmed is at least 18 mph (30 km/h).
checked and the system reinitialised. The vehicle responds to the driver's foot
The under-inflation alert can only be relied pressure on the accelerator until resistance is
on if the reinitialisation of the system has felt in the pedal, which signifies that the vehicle
been done with the pressures in the four has reached the programmed speed.
tyres correctly adjusted. However, pressing the pedal beyond this point
of resistance to the floor permits exceeding
of the programmed speed. To resume use of
Snow chains
"LIMIT" speed limiter the limiter, simply reduce the pressure on the
accelerator pedal gradually and return to a
The system does not have to be System preventing the vehicle speed below the programmed speed.
reinitialised after fitting or removing snow from exceeding the speed setting Setting and operation of the system can be
chains. programmed by the driver. done with the engine running, regardless of
being stationary or in motion.
Driving
The speed limiter selection status and the Selecting the function Pressing and holding increases the setting in
programmed speed are displayed in the control steps of 3 mph (5 km/h).
panel.
To memorise a speed lower than the previous one:
Function selected, F Press the SET – button.
"Speed limiter" symbol A short press decreases the setting by 1 mph (km/h).
displayed. Pressing and holding decreases the setting in steps
of 5 mph (km/h).
Function deactivated, F Turn the knob to the LIMIT position. Activation/Deactivation
last programmed speed The speed limiter is selected but is not
– OFF. yet active. The display shows the last
programmed speed.
Function activated. Programming a speed
If the vehicle speed is

higher, the programmed A first press on this button switches the speed
speed is displayed limiter on, a second press deactivates it (OFF).
flashing.
Exceeding the programmed
speed
Operating fault detected, A speed can be programmed without activating
OFF – the dashes flash. the limiter but with the engine running.
To memorise a speed higher than the previous one:
F Press the SET + button.
A short press increases the speed setting by
1 mph (km/h).
Driving
Pressing the accelerator pedal in order to Operating fault

exceed the programmed speed will have
"CRUISE" cruise control
no effect unless you press the pedal firmly
beyond the point of resistance.
System which automatically
The speed limiter is deactivated temporarily
maintains the speed of the vehicle
and the programmed speed setting flashes,
at the value programmed by the
accompanied by an audible signal.
driver, without any action on the
To return to the limiter function, reduce your
accelerator pedal.
speed below the programmed speed.
The programmed speed is cleared, then
replaced by three dashes.
Flashing of the speed setting Contact a CITROËN dealer or a qualified
It flashes: workshop to have the system checked.
- after forcing the accelerator pedal past the
point of resistance,
- when the limiter cannot prevent the speed In any event, the speed limiter cannot
of the vehicle increasing, because of the replace the need to observe speed limits,
6
profile of the road or when going down a nor can it replace the need for vigilance on
steep hill, the part of the driver. 1. Cruise control mode Selection/Off.
- under sharp acceleration. Always pay attention to the profile of the 2. Decreases the set value.
road and sharp acceleration and stay in 3. Increases the set value.
complete control of your vehicle.
4. Stop/Resume cruise control.
Switching the funtion off To avoid any jamming under the pedals:
- ensure that the mat is positioned and
secured to the floor correctly,
To be programmed or activated, the vehicle
- never fit one mat on top of another.
speed must be above 25 mph (40 km/h), with at
least the 4th gear engaged.
The cruise control selection status and the

F Place the knob at the 0 position or switch off programmed speed are displayed in the control
the ignition to switch the function off. panel.
The last programmed speed remains in the
memory.
Driving
Function selected, Selecting the function Temporarily exceeding the

"Cruise control" symbol
displayed.
speed
Function deactivated,
OFF
F Turn the knob to CRUISE position. The

cruise control is selected but is not yet It is possible to accelerate and drive
active and no speed has been programmed. momentarily at a speed faster than the
Function activated.
programmed speed. The programmed value
flashes.
First activation/ When the accelerator pedal is released, the
Programming a speed vehicle will return to the programmed speed.
If the vehicle speed is

Deactivation (off)
higher, the programmed
speed is displayed
flashing.
Operating anomaly
detected,
OFF – the dashes flash.
F Reach the chosen speed by pressing the

accelerator.
F Press this button or the brake or clutch
F Press the SET – or SET + button.
pedal.
The speed setting is programmed/activated
and the vehicle will maintain this speed.
Driving
Reactivation Without using the accelerator Cancelling the programmed

F Press the SET + button. speed value
A short press increases the speed setting by
When the vehicle stops, after the ignition is
1 mph (km/h).
switched off, the system no longer stores any
Pressing and holding increases the setting in
speeds.
steps of 3 mph (5 km/h).
Using the accelerator
F Following deactivation of the cruise control,
Operating fault
F Exceed the memorised speed until the
press this button. desired speed is reached,
Your vehicle will return to the last programmed F Press the SET – or SET + button.
speed.
Alternatively, you can repeat the "first To memorise a speed lower than the previous
activation" procedure. one:
F Press the SET – button.
A short press decreases the setting by 1 mph
Changing the programmed (2 km/h).
speed
6
Pressing and holding decreases the setting in The programmed speed is cleared, then
steps of 5 mph (8 km/h). replaced by three dashes. Contact a CITROËN
dealer or a qualified workshop to have the
Switching the function off system checked.
F Place the knob at the 0 position or switch off

the ignition to switch the function off.
There are two methods for memorising a speed

higher than the previous one.
Driving
If necessary, the vehicle's braking system is

When changing the programmed This system has been designed to
operated automatically to avoid a collision with
reference speed by means of a maintained improve driving safety.
the vehicle ahead.
press, remain vigilant as the speed can The driver must always check the traffic
increase or decrease rapidly. and assess the distance and relative
Do not use the cruise control on slippery speed of other vehicles. Automatic braking occurs later than if
roads or in heavy traffic. Active City Brake cannot in any done by the driver, so as to intervene only
When descending a steep hill, the cruise circumstances replace the need for when there is a high risk of collision.
control system cannot prevent the vehicle vigilance on the part of the driver.
from exceeding the programmed speed.
The cruise control system cannot in
any circumstances replace the need
to observe speed limits or the need for Never look at the laser sensor through Conditions of activation
vigilance on the part of the driver. an optical instrument (magnifying glass,
Active City Brake functions if the following
It is advisable to leave your feet near the microscope, etc.) at a distance of less
conditions are met:
pedals. than 10 centimetres: risk of eye injury!
- the ignition is on,
To avoid any jamming under the pedals:
- the vehicle is moving forward,
- ensure that the mat is positioned and
- the speed is between about 3 and 20 mph
secured to the floor correctly,
(5 and 30 km/h),
- never fit one mat on top of another.
Principle - the braking assistance systems (ABS,
EBFD, EBA) have not failed,
- the trajectory control systems (ASR, DSC)
are not deactivated or faulty,
- the vehicle is not making a sharp turn,
- the system has not triggered in the last ten
Active City Brake seconds.
Active City Brake is a driving assistance

system that aims to avoid a frontal collision
or reduce the speed of an impact if the driver Using a laser sensor located at the top of the
does not react sufficiently (inadequate brake windscreen, this system detects a vehicle
application). running in the same direction or stationary
ahead of your vehicle.
Driving
Operation During automatic braking, the driver can When weather conditions are difficult
always obtain a higher rate of deceleration (extremely heavy rain, snow, fog, hail,
When your vehicle is too close to or
than that controlled by the system, by etc.), braking distances increase, which
approaches the vehicle ahead too quickly, the
pressing firmly on the brake pedal. may reduce the system’s ability to avoid a
system automatically applies the brakes to
collision.
avoid a collision.
The driver must therefore remain
You are then warned by the display of a
particularly cautious.
message.
Your vehicle's brake lamps come on to warn
After an impact, the system is
other road users.
automatically put out of service: it no Never let snow build up on the bonnet
longer operates. or any object above the bonnet nor at
The collision can be avoided if the speed You must go to a CITROËN dealer or a the front of the roof: this could enter the
difference between your vehicle and qualified workshop to have the system field of vision of the sensor and obstruct
the one ahead is not more than 9 mph made operational again. detection.
(15 km/h).
Above this threshold, the system will do
what is possible to avoid or reduce the
Operating limits
6
accident by lowering the speed of impact.
Deactivation
The system only detects vehicles that are
The automatic braking can bring the vehicle to stationary or moving in the same direction as The system is deactivated in the vehicle
a complete stop if the situation requires it. your vehicle. configuration menu, accessible with the ignition
In this case, the vehicle is held stationary on.
temporarily (for about 1.5 seconds) to allow Its status is stored when the ignition is switched
the driver to take back control by pressing the It does not detect small vehicles (bicycles,
off.
brake pedal. motorcycles), pedestrians or animals, nor
non-reflective stationary objects. When the system is deactivated, a
message is displayed every time the
ignition is switched on, to warn you.
Unless the driver de-clutches quickly
enough during automatic braking, This system will not trigger or intervene if the
triggering of the system may cause the driver:
engine to stall. - accelerates hard
- or turns the steering wheel sharply
(avoidance manoeuvre).
Driving
With monochrome screen C Operating faults Do not attempt to remove, adjust or test
F Press the MENU button for access to the the sensor.
main menu. Only a CITROËN dealer or a qualified
F Select "Personalisation-Configuration".
Sensor fault workshop is able to work on the system.
F Select "Define the vehicle parameters". The operation of the laser sensor may suffer
F Select "Driving assistance". interference from accumulations of dirt or
F Select "Automatic emergency braking: misting of the windscreen. In this case you are When towing a trailer or when the vehicle
OFF" or "Automatic emergency braking: warned by the display of a message. is being towed, the system must be
ON". Use windscreen demisting and regularly clean deactivated.
F Press the "7" or "8" button to tick or the area of the windscreen in front of the
untick the box and respectively activate or sensor.
deactivate the system.
F Press the "5" or "6" button, then the OK Parking sensors
button to select the "OK" box and confirm or
the Back button to cancel. Do not stick or otherwise attach any object
on the windscreen in front of the sensor.
With the touch screen tablet

F Press the "MENU" button. System fault
F Select the "Driving" menu.
In the event of a malfunction of the system, you
F In the secondary page, select "Vehicle
are warned by an audible signal and the display
parameters".
of the message "Automatic braking system
F Select the "Driving assistance" tab.
fault".
F Tick or untick the "Automatic emergency
Have the system checked by a CITROËN
braking" box to activate or deactivate the
dealer or a qualified workshop. The audible (front and rear) and/or visual (rear)
system.
F Confirm. parking sensor system consists of proximity
In the event of an impact to the sensors installed in the bumpers.
windscreen at the sensor, deactivate the They detect any obstacle which enters the field
system and contact a CITROËN dealer of vision (person, vehicle, tree, fence, etc.)
or a qualified workshop to have your behind the vehicle during the manoeuvre.
windscreen replaced.
Driving
Certain objects detected at the beginning of the Display in the screen Stopping the assistance
manoeuvre will no longer be detected at the
end of the manoeuvre due to the blind spots Change to neutral.
between and below the sensors.
Examples: stake, roadworks cone or pavement
post. Activation/Deactivation
Engage reverse gear
Engage a forward gear
You activate or deactivate the system by

pressing this button.
The activation or deactivation of the system is
6
stored when the vehicle stops.
An audible signal confirms the activation of the Operating fault

system by engaging reverse gear.
In the event of an operating fault, the LED
The proximity information is indicated by an In addition to the rear parking sensors, the in the button comes on, accompanied by an
audible signal which becomes more rapid as front parking sensors are triggered when an audible signal and a message on the screen.
the vehicle approaches the obstacle. obstacle is detected in front and the speed of Contact a CITROËN dealer or a qualified
When the distance between the rear of the vehicle remains below 6 mph (10 km/h). workshop.
the vehicle and the obstacle is less than
approximately 30 centimetres, the audible
signal becomes continuous. In bad or wintry weather, ensure that the
The sound emitted by the speaker (front or
sensors are not covered with mud, ice or
rear) indicates whether the obstacle is in
snow.
front or behind.
Driving
The representation with overlaid lines helps

The system will be deactivated
with the manoeuvre.
automatically if a trailer is being towed or if
They are represented as lines marked "on the
a bicycle carrier is fitted (vehicle fitted with
ground" and do not indicate the position of tall
a towbar or bicycle carrier recommended
obstacles (for example: other vehicles, etc.)
by CITROËN).
relative to the vehicle.
Some distortion of the image is normal.
The parking sensor system cannot in Blue lines represent the general direction of the
any circumstances replace the need for vehicle (the distance between them represents
vigilance on the part of the driver. the width of your vehicle without the door
mirrors).
The reversing camera is activated automatically
The red line represents a distance of about
when reverse gear is engaged.
30 cm beyond the edge of your vehicle's rear
The image is displayed in the touch screen tablet. bumper.
The reversing camera function may be The green lines represent distances of about 1
It is advisable to deactivate the system if and 2 metres beyond the edge of your vehicle's
supplemented with parking sensors.
your vehicle is fitted with a rear ladder or if rear bumper.
you are transporting a load longer than the The turquoise blue curves represent the
length of the vehicle. The reversing camera cannot, in any maximum turning circle.
circumstances, replace the need for
vigilance on the part of the driver. Opening the tailgate will cause the display
to disappear.
Reversing camera
High pressure washing
When washing your vehicle, do not direct
the lance from less than 30 cm from the
lens of the camera.
Clean the reversing camera regularly
using a soft, dry cloth.
FILL UP WITH
CONFIDENCE
WITH TOTAL QUARTZ
LUBRICANTS For more than 45 years, TOTAL and
CITROËN have shared common values:
excellence, creativity and technological
innovation.
It is in this same spirit that TOTAL has
developed a range of TOTAL QUARTZ
lubricants adapted to CITROËN
engines, making them even more fuel
efficient and environmentally friendly.
TOTAL and CITROËN test the
reliability and the performance of their
products during motorsport races in
extreme conditions.
Choose TOTAL QUARTZ
lubricants for servicing
your vehicle; this is your
assurance of optimum
durability and performance
from your engine.
Practical information
When filling the fuel tank, do not continue after

Fuel the 3rd cut-off of the nozzle. This could cause
Low fuel level malfunctions.
When the low fuel level is reached

The capacity of the tank is approximately
this warning lamp comes on.
60 litres (53 litres for BlueHDi Diesel version).
F After filling the fuel tank, lock the cap and
When it first comes on, around 8 litres remain close the flap.
in the tank, according to your driving style and
your engine.
You must refuel as soon as possible to avoid When refilling, a mechanical
running out. system prevents opening of
Never continue to drive until you run out of fuel, the left side door. Ensure
as this could damage the emission control and that nobody attempts to slide
injection systems. open this door while the fuel
flap is open.
After closing the flap, the
F Open the fuel filler flap.
sliding side door can become
Filling F Insert the key and turn it a quarter turn.
blocked. Push the door to
F Remove the filler cap and hook it onto the
The fuel tank must be filled with the engine close it and then open it.
clip located on the inside of the filler flap.
off.
A label inside the fuel filler flap reminds you of

the type of fuel to use. When refilling, ensure that
At least 5 litres of fuel must be added in order nobody attempts to open the
to be registered by the fuel gauge. sliding side door while the
Opening the filler cap may create a noise fuel filler flap is open.
caused by an inrush of air. This is entirely
normal and results from the sealing of the fuel
system.
Fuel system cut-off
In the event of a severe collision, a device

automatically cuts off the fuel supply to the
engine.
The flashing warning lamp is
accompanied by a message on the
screen.
Verify the absence of any odour and fuel leaks

outside the vehicle and restore the power
supply:
F switch off the ignition (STOP position),
F remove the key from the ignition,
F reinsert the key in the ignition,
F switch on the ignition and start.
Compatibility of fuels
Fuel used for petrol engines

Diesel fuel that meets standard
The use of any other type of (bio) fuel
EN590 mixed with a biofuel that
(vegetable or animal oils, pure or diluted,
The petrol engines are compatible with biofuels meets standard EN14214 (possibly
domestic fuel, etc.) is strictly prohibited
that conform to current and future European containing up to 7% Fatty Acid
(risk of damage to the engine and fuel
standards and which can be obtained from Methyl Ester).
system).
filling stations: Diesel fuel that meets standard
EN16734 mixed with a biofuel that
Petrol that meets standard EN228, meets standard EN14214 (possibly
mixed with a biofuel that meets containing up to 10% Fatty Acid The only Diesel additives authorised for
standard EN15376. Methyl Ester). use are those that meet the B715000
standard.
Paraffinic Diesel fuel that meets
standard EN15940 mixed with
a biofuel that meets standard Diesel at low temperature
The only petrol additives authorised for
EN14214 (possibly containing up to At temperatures below 0°C (+32°F), the
use are those that meet the B715001
7% Fatty Acid Methyl Ester). formation of paraffins in summer-type Diesel
standard.
fuels could result in an abnormal operation
B20 or B30 fuel meeting standard of the fuel supply circuit. To avoid this, we
EN16709 can be used in your recommend using winter-type Diesel fuel and
Fuel used for Diesel Diesel engine. However, this use, keeping the fuel tank more than 50% full.
engines even occasional, requires strict If, despite this, at temperatures below -15°C
application of the special servicing (+5°F) the engine has problems starting,
The Diesel engines are compatible with
conditions referred to as "Arduous just leave the vehicle in a garage or heated
biofuels that conform to current and future
conditions". workshop for a little while.
European standards and which can be
obtained from filling stations:
For more information, contact a CITROËN
Travelling abroad The snow chains must be fitted only to the Installation advice
Certain fuels could damage your vehicle's driving wheels. They must never be fitted
engine. to "space-saver" type spare wheels. F If you have to fit the chains during a journey,
In certain countries, the use of a particular stop the vehicle on a flat surface on the side
fuel may be required (specific octane rating, of the road.
specific trade name, etc.) to ensure correct F Apply the parking brake and if necessary
operation of the engine. put wheel chocks against the wheels to
Take account of the legislation in force in
For any additional information, contact a dealer. prevent your vehicle from sliding.
your country on the use of snow chains
F Fit the chains following the instructions
and the maximum authorised speed.
provided by the manufacturer.
F Move off gently and drive for a few seconds,
without exceeding 30 mph (50 km/h).
Use only the chains designed to be fitted to the F Stop your vehicle and check that the snow
Snow chains type of wheel fitted to your vehicle: chains are correctly tightened.
In wintry conditions, snow chains improve

traction as well as the behaviour of the vehicle
when braking. It is strongly recommended that before
Original tyre size Maximum link size you leave, you practise fitting the snow
chains on a level and dry surface.
7
195/65 R15
195/70 R15 Avoid driving with snow chains on roads
that have been cleared of snow, to avoid
205/65 R15 9 mm
damaging your vehicle's tyres and the
215/55 R16 road surface. If your vehicle is fitted with
215/50 R17 alloy wheels, check that no part of the
chain or its fixtures is in contact with the
For more information on snow chains, contact a wheel rim.
CITROËN dealer or a qualified workshop.
Removable snow shield Fitting

plug
F Put the removable snow shield in front of its

centring pin A on the front bumper.
F Fit it in place by pressing every clip B at the
four corners.
F Within one minute after switching off
the ignition, move the wiper stalk down
Removal to position the wiper blades along the
windscreen pillars (special position).
F Place a screwdriver at the hole near each
clip.
F Make a lever movement to unclip the four Changing a windscreen
clips B.
wiper blade
Depending on country, the removable snow Changing a wiper blade

shield plug is installed on the lower part of the
front bumper, to avoid the accumulation of Putting the windscreen
snow at the radiator cooling fan. wiper blades in the special
position
Do not forget to remove the removable
snow shield plug when the exterior
temperature is higher than 10°C (no risk of
snowfall) or if you are towing.
F
F
Raise the wiper arm.
Unclip the wiper blade and remove it.
Towing device Observe the maximum authorised towable
weight, indicated on your vehicle's
F Install the new blade. Load distribution
registration certificate, the manufacturer's
F Return the wiper arm to the normal position. F Distribute the load in the trailer so that the
label and in the Technical data section of
heaviest items are as close as possible to
To stow the wiper blades, switch on the ignition this guide.
the axle and the nose weight approaches
and operate the wiper stalk again. Complying with the maximum
the maximum permitted without exceeding
authorised nose weight (towball)
it.
also includes the use of accessories
Air density decreases with altitude, thus
Changing the rear wiper blade reducing engine performance. The maximum
(bicycle carriers, tow boxes, etc.).
load which can be towed must be reduced by
10% per 1,000 metres of altitude.
Observe the legislation in force in the
country in which you are driving.
Use towing devices and their original
harnesses approved by CITROËN. It is
recommended that the installation be Towbar with a swan neck towball,
performed by a CITROËN dealer or a lockable and quickly detachable
qualified workshop.
If the towing device is not fitted by Presentation
a CITROËN dealer, it must still be
7
fitted in accordance with the vehicle
manufacturer's instructions.
Certain driving assistance or manoeuvring
assistance functions are automatically
deactivated if an approved towbar is used.
F Lift the arm, then unclip the blade and

remove it.
F Install the new blade and put the arm back.
This swan neck towbar, delivered assembled,

can be removed and fitted quickly and easily.
No tools are needed.
Instructions for fitting and before

each use
Check that the swan neck is correctly locked by
verifying the following points:
- the green mark on the locking wheel is
visible.
- the safety lock on the locking wheel is
facing rearward. During use
- the safety lock is closed and the key Never unlock the device when a trailer or
removed; the locking wheel can no longer load carrier is fitted to the swan neck.
be operated,
- the swan neck must no longer move in its
carrier.
When hooking up the towbar, don't forget to After use
connect the electrical wiring harness. For journeys made without a trailer or load
carrier, the swan neck must be removed
and the blanking plug inserted in the
Fitting carrier. This measure applies particularly if
the swan neck could hinder visibility of the
number plate or lighting.
Removal
If you install transverse bars on these bars,

Maintenance refer to the weight values indicated by the
manufacturer and do not exceed: 75 kg.
Correct operation is only possible if the swan
neck and its carrier remain clean.
Before cleaning the vehicle with a high-
pressure jet wash, the swan neck must be
Modutop roof bars
removed and the blanking plug inserted in the
carrier.
The two longitudinal Modutop roof bars can be
Roof bars removed.
7
The maximum authorised weight on each roof
bar is 35 kg.
Recommendations for Other accessories

loading the roof These accessories and parts, having been
This procedure requires the use of the spanner tested and approved for reliability and safety,
supplied with the tools for changing a wheel. are all adapted to your vehicle. A wide range of
genuine parts is available.
For more information on changing a Another range of accessories is also available

wheel, refer to the corresponding section. which is centred around comfort, sport and
maintenance:
In all cases, the load must rest on the non-slip
F Open the protective covers. bands provided for this purpose, and must not Anti-intrusion alarm, glass engraving, first aid
F Unscrew the 4 screws using the spanner touch the roof or the glazing on the roof. kit, safety vest, front and rear parking sensors,
and remove them. hazard warning triangle, alloy wheel anti-theft
F Turn the bars by 90°, positioning the hollow bolts, etc.
parts towards the front.
F Refit the 4 screws and tighten them using Seat covers compatible with airbags for front
the spanner.
Maximum weights on bars seat, bench seat, rubber mats, carpet mats,
F Close the protective covers. snow chains, blinds, tailgate bicycle carrier, etc.
To avoid any jamming under the pedals:
- ensure that the mat and its fixings are
- Transverse bars on longitudinal bars: 75 kg positioned correctly,
(these bars are not compatible with the - never fit one mat on top of another.
Modutop).
Audio systems, hands-free kit, speakers, CD
changer, navigation, USB Box, Video Kit, etc.
With a wide range of audio and telematic
F Only use the strap passages A to secure equipment offered on the market, the technical
the load correctly. - Roof rack: 120 kg. constraints associated with the installation of
- Transverse bars on roof: 100 kg. devices from these product families require
- Transverse bars on longitudinal bars: 75 kg. taking into account the device specifics and
their compatibility with the capacities of the F Raise the bonnet slightly by reaching in a
standard equipment of your vehicle. Please
Bonnet flat hand, palm down, to make access to the
check this with a CITROËN dealer in advance. Opening lever easier.
F With this hand, push the safety catch to the
On the inside left and lift the bonnet.
Professional equipment Bonnet stay

range
The spare parts department publishes a

catalogue of accessories offering various
equipment and fittings, such as:
Load stops (all types).
Loading roller.
F Pull the release lever under the dashboard
Towbar, towing harness: trailer towbar, which F Secure the stay in its housing, identified by
towards you to release the bonnet.
must be installed by a CITROËN dealer. a sticker on the left-hand side of the vehicle,
Partition walls and dividing grilles, smooth to hold the bonnet open.
wood interior protection with non-slip floor. F Before closing the bonnet, put the stay back
7
Protective grilles. On the outside
in its clip without using excessive force.
Closing
F Lower the bonnet and release it at the end
of its travel. Check that the bonnet is locked.
Avoid opening the bonnet in strong winds.
7. Engine oil filler cap.

Engines 8. Power steering fluid reservoir.
Do not discard used oil or fluids into
sewers or onto the ground.
Petrol 9. Priming pump (except BlueHDi engine). Take used oil to a CITROËN dealer or a
qualified workshop and dispose of it in
the containers reserved for this purpose.
Battery connections:
+ Positive terminal.
- Negative terminal (earth).
Oil level
Diesel Checking levels It is recommended that you check the oil every
3,000 miles (5,000 km) and that you top it up
Check all of these levels regularly, in line between two oil changes, if necessary.
with the manufacturer's servicing schedule. Check the level with the vehicle level, engine
Top them up if necessary, unless otherwise cold, using the dipstick.
indicated.
If a level drops significantly, have the Dipstick
corresponding system checked by a CITROËN
dealer or a qualified workshop. 2 marks on the dipstick:
Take care during any work under the bonnet.
A = maximum
If you fill past this mark, consult
1. Front screenwash fluid reservoir. If you have to remove/refit the engine a CITROËN dealer or a qualified
2. Fusebox. styling cover, handle it with care to avoid workshop. An excess of oil could
3. Engine coolant reservoir. damaging the fixing clips. cause engine damage.
4. Brake and clutch fluid reservoir. B = minimum
5. Air filter.
6. Dipstick. Used products If this mark is not reached, top up the level
through the oil filler cap, using the type of oil
Avoid prolonged contact of used oil or approved for your engine.
fluids with the skin. Never allow the level to fall below this mark.
Most of these fluids are harmful to health To maintain the reliability of engines and
or indeed very corrosive. emission control systems, the use of additives
in engine oil is prohibited.
Oil change Brake fluid level When the engine is hot, the temperature of the
coolant is regulated by the electric fan. This
This must be done at the intervals specified in may operate with the ignition off; furthermore,
the manufacturer's servicing schedule. Ask for because the cooling system is under pressure,
advice from a CITROËN dealer. wait for at least one hour after the engine has
stopped before carrying out any work.
To avoid any risk of scalding, unscrew the cap
by a quarter of a turn to allow the pressure to
drop. Once the pressure has dropped, remove
the cap and top-up the level with the coolant.
If coolant has to be added frequently, this
indicates a failure which must be checked by a
CITROËN dealer as soon as possible.
The brake fluid must be changed at the
intervals prescribed according to the Topping up
manufacturer's servicing schedule.
The level must be between the MIN and MAX
Use brake fluid recommended by the
marks located on the expansion bottle. If more
manufacturer, meeting the DOT4 standard.
F Remove the dipstick before filling. than 1 litre is required to top up the level, have
The level must be between the MIN and MAX
F Check the level after filling (never exceed the circuit checked by a CITROËN dealer or a
marks on the reservoir.
the maximum mark). qualified workshop.
If fluid has to be added frequently, this indicates
7
F Refit the oil filler cap before closing the a malfunction which must be checked by a
bonnet. CITROËN dealer or a qualified workshop as
soon as possible.
Power steering
fluid level
Engine oil grade The vehicle must be parked on level ground
Coolant level with the engine cold. Unscrew the cap
In all cases, the chosen oil must meet integrated with the gauge and check the level
Only use coolant recommended by the
the requirements in accordance with the which must be between the MIN and MAX
manufacturer.
manufacturer's servicing schedule. marks.
Otherwise you risk causing serious damage to
your engine.
Screenwash fluid level If the message is still displayed and the service Brake pads
warning lamp remains lit, consult a CITROËN
For optimal cleaning quality and safety, we dealer or a qualified workshop. Brake wear depends on the style
recommend that you use the CITROËN range of driving, particularly in the case
of products. Topping up of vehicles used in town, over short
For optimum cleaning and to avoid freezing, This additive must be topped up without delay distances. It may be necessary to
this fluid must not be topped up or replaced by a CITROËN dealer or a qualified workshop. have the condition of the brakes
with plain water. checked, even between vehicle
Capacity of the screenwash reservoir: services.
approximately 3 litres.
Unless there is a leak in the circuit, a drop in
Diesel additive level (Diesel Checks the brake fluid level indicates that the brake
pads are worn.
engine with particle filter)
Battery
A low additive level is indicated by The battery does not require any
maintenance. Brake disc/drum wear
illumination of the service warning
lamp, accompanied by an audible However, check regularly that the
For information on checking brake
warning and a message on the terminals are correctly tightened
disc/drum wear, contact a CITROËN
screen. (versions without quick release terminals)
Once the engine is started, this signals that and that the connections are clean.
the particle filter is starting to saturate (in At the start of winter, have your battery checked
conditions of urban driving of exceptionally long by a CITROËN dealer or a qualified workshop.
duration: low speeds, traffic jams, etc.).
To regenerate the filter, you are advised to
Parking brake
drive as soon as possible, as traffic conditions Versions equipped with Stop & Start are If excessive travel or a loss of
allow, at a speed of at least 40 mph (around fitted with a 12 V lead-acid battery of effectiveness of this system is
60 km/h) for at least five minutes (until the specific technology and specification. noticed, the parking brake must
service warning lamp goes off and the Its replacement should be carried out be checked, even between two
message disappears). only by a CITROËN dealer or a qualified services.
Relay noises may be heard under the workshop.
dashboard during regeneration of the particle This system must be checked by a CITROËN
filter. dealer or a qualified workshop.
Carbon filter and passenger We recommend the use of a combined When accelerating after prolonged operation
passenger compartment filter. Thanks to its of the vehicle at very low speed or at idle, you
compartment filter second special active filter, it contributes may, in exceptional circumstances, notice the
to the purification of the air breathed by emission of water vapour at the exhaust. This
the occupants and the cleanliness of the does not affect the behaviour of the vehicle or
passenger compartment (reduction of allergic the environment.
symptoms, bad odours and greasy deposits).
Refer to the warranty and maintenance guide Bleeding water from the
for details on the replacement intervals for Diesel filter
these components.
(Depending on the country of sale)
Depending on the environment (dusty
If this warning lamp comes on, the
atmosphere, etc.) and the use of the vehicle
filter must be bled. Otherwise, bleed
(urban driving, etc.), change them twice as
it regularly each time the engine oil
often if necessary.
is changed.
F To drain the water, unscrew the bleed screw
Oil filter located on the filter.
F Operate it until all the water in the
Change the oil filter each time the transparent tube has drained then tighten
engine oil is changed. the bleed screw again.
7
Refer to the manufacturer’s
servicing schedule for details of
the replacement interval for this HDi engines make use of advanced
component. technology. Specialist knowledge is
needed for any work on the system, which
An access flap allows you to change the filters. can only be assured by CITROËN dealers.
The carbon filter filters dust continuously and Particle filter (diesel)
efficiently.
Maintenance of the particle filter must be
A clogged passenger compartment filter may
carried out by a CITROËN dealer.
reduce the performance of the air conditioning
system and generate undesirable odours.
Manual gearbox AdBlue® (BlueHDi The AdBlue ® is contained in a special tank with
a capacity of around 17 litres. An alert system
The gearbox does not require any engines) is triggered automatically once the reserve
maintenance (no oil change). level is reached: you can then drive for a further
1,500 miles (2,400 km) before the tank is
emptied completely.
Only use products recommended by
CITROËN or products of equivalent quality
Once the AdBlue ® tank is empty, a system
and specification.
required by regulations prevents starting
In order to optimise the operation of
of the engine.
components as important as those in the
If the SCR system is faulty, the level of
braking system, CITROËN selects and
emissions from your vehicle will no longer
offers very specific products.
meet the Euro 6 standard: your vehicle
becomes polluting.
To respect the environment and ensure
In the event of a confirmed fault with the
After washing the vehicle, dampness, or compliance with the Euro 6 standard, without
SCR system, you must go to a CITROËN
in wintry conditions, ice can form on the adversely affecting the performance or fuel
dealer or a qualified workshop as soon
brake discs and pads: braking efficiency consumption of diesel engines, CITROËN
as possible: after a running distance of
may be reduced. Make light brake has taken the decision to equip its vehicles
685 miles (1,100 km), a system will be
applications to dry and defrost the brakes. with a system that associates SCR (Selective
triggered automatically to prevent engine
Catalytic Reduction) with a diesel particle filter
starting.
(DPF) for the treatment of exhaust gases.
In either case, a range indicator gives you
the distance you can travel before the
vehicle is immobilised.
SCR system For more information on the warning
lamps and the associated alerts, refer to
Using a fluid called AdBlue ® that contains the corresponding section.
urea, a catalytic converter turns up to 85%
of nitrogen oxide (NOx) into nitrogen and
water, which are harmless to health and the
environment.
In certain conditions (high ambient

Freezing of AdBlue ® Never top up from an AdBlue ® dispenser
temperature, for example), the risk of ammonia
AdBlue ® freezes at temperatures below reserved for heavy goods vehicles.
being released cannot be discounted: do not
around -11°C.
inhale the fluid. Ammonia vapour has an irritant
The SCR system includes a heater for the
effect on mucous membranes (eyes, nose and
AdBlue ® tank, allowing you to continue
throat).
driving in all weather conditions.
Recommendations on storage
Keep AdBlue ® out of reach of children, in
its original container or bottle. AdBlue ® freezes below around -11°C and
® Never transfer AdBlue ® to another deteriorates above 25°C. It is recommended
Topping up with AdBlue container: it would lose its purity. that bottles or containers are stored in a cool
place and protected from direct sunlight.
Before topping up, please read the Under these conditions, the fluid can be kept
following warnings carefully. for at least a year.
If the fluid has frozen, it can be used once
Use only AdBlue ® liquid that meets the
it has completely thawed out at ambient
ISO 22241 standard.
temperature.
Precautions in use
AdBlue ® is a urea-based solution. This fluid is Never dilute AdBlue ® with water.
Never pour AdBlue ® into the diesel fuel Never store bottles or containers of
non-flammable, colourless and odourless (kept
AdBlue ® in your vehicle.
7
in a cool area). tank.
In the event of contact with the skin, wash the
affected area with soap and running water. In Containers are available from a
CITROËN dealer or a qualified workshop. Do not dispose of AdBlue ® bottles or
the event of contact with the eyes, immediately
containers in the household waste.
rinse the eyes with large amounts of water
Place them in a container provided for
or with an eye wash solution for at least
this purpose or take them to your dealer.
15 minutes. If a burning sensation or irritation
You can also visit a service station
persists, get medical attention.
equipped with AdBlue pumps specially
If swallowed, immediately rinse the mouth with
designed for private vehicles and light
clean water and then drink plenty of water.
goods vehicles.
Procedure F Obtain an AdBlue ® container or bottle. After

Once the AdBlue tank has been filled
first checking the use-by date, read the
Before topping up, ensure that the vehicle is after a breakdown due to running out
instructions on the label carefully before
parked on a flat and level surface. of AdBlue, you must wait for at least
pouring the contents of the container or
In wintry conditions, ensure that the 5 minutes before switching on the
bottle into your vehicle's AdBlue tank.
temperature of the vehicle is above -11°C. ignition, opening the driver's door,
Or
Otherwise the AdBlue ® may be frozen and unlocking the vehicle or inserting the
so cannot be poured into its tank. Park your F Insert the AdBlue ® pump nozzle and refill key in the switch.
vehicle in a warmer area for a few hours to the tank until the nozzle stops automatically. Switch on the ignition, then after a
allow the top up to be carried out. minimum of 10 seconds, start the engine.
Important:
- To avoid overflowing the AdBlue ® tank,
it is recommended:
• To do a top up of between 10 and
13 litres using the AdBlue ® bottle.
Or
• That you stop after the nozzle’s first
automatic stop if you are refilling at a
service station.
- If your vehicle's AdBlue ® tank is
F With the vehicle unlocked, open the fuel completely empty – which is confirmed
filler flap; the blue filler cap for the AdBlue ® by the alert messages and the
tank is located to the left of the black fuel impossibility of starting the engine –
filler cap. you must add at least 5 litres.
F Turn the blue cap 1/6th of a turn anti-
clockwise.
F Remove the blue cap.
F Tick the deflated wheel on the speed limit

Puncture repair kit sticker provided and affix it to the vehicle's
Please note, the sealant product is
harmful if swallowed and causes irritation
steering wheel to remind you that a wheel is
The kit is located in a storage compartment to the eyes.
in temporary use.
under the front seat. It must be kept out of the reach of children.
F Clip the bottle 1 onto the compressor 2.
Vehicles supplied with a temporary puncture Do not discard the bottle by the roadside
F Connect the bottle 1 to the valve on the tyre
repair kit do not have a spare wheel or the after use, take it to a CITROËN dealer or
to be repaired.
corresponding tools (jack, wheelbrace, etc.). an authorised waste disposal site.
F Take care to unwind the compressor pipe
Bottles of sealant are available from
before connecting it to the bottle.
CITROËN dealers.
The temporary puncture repair kit comprises a F Connect the power lead to one of the 12 V
compressor and a bottle of sealant. sockets on the vehicle.
F Switch on the compressor by pressing
button A until the pressure of the tyre
reaches 2.0 bars. If this pressure cannot be Changing a wheel
Using the kit reached, the tyre cannot be repaired.
Parking the vehicle
F Remove the compressor and store it.
F Drive immediately for a few miles
(kilometres) at low speed in order to seal the
puncture.
F Adjust the pressure using the compressor
as recommended for the vehicle and check
that the leak has been sealed properly (no
F Make sure that the occupants are out of the
further loss of pressure).
vehicle and waiting somewhere safe.
F Drive at reduced speed (50 mph (80 km/h)).
F Where possible, park the vehicle on level,
The tyre must be examined and repaired by
8
stable and non-slippery ground.
a professional as soon as possible.
F Apply the parking brake, switch off the
After use, the bottle can be stored in a plastic ignition and engage first or reverse gear.
bag, supplied in the kit, to avoid staining your F Place a chock under the wheel diagonally
vehicle with traces of fluid. opposite the wheel to be changed.
1. Bottle of sealant, with integrated tube.
2. Compressor.
A. Starting button.
If the vehicle is equipped with a towbar, it is However, if the vehicle is not 4.

sometimes necessary to raise the vehicle equipped with a spare wheel, the
slightly to make it easier to remove the spare towing eye will be located in the
Spanner for Modutop roof bars and rear
wheel from its carrier. storage compartment under the
lamps.
passenger footwell behind the
In certain ground conditions and/or when
driver's seat.
transporting heavy loads, consult with a
CITROËN dealer or a qualified workshop. F If necessary, move the seat forward to
The jack and the tool kit are specific to your access the storage compartment from the Spanner for rear lamps.
vehicle. Do not use them for any other purpose. rear. 5. Alloy wheel trim removal tool
F Remove the flap then take out the jack and
the tool carrier.
Access to tools F Remove the required tools from the carrier.
This tool is not required for your version.
6. Towing eye.
Access to the spare wheel
The tools are stowed in a storage compartment 1. Jack.

closed by a flap under a front seat.
2. Wheelbrace.
3. Chock.
F Open the rear doors to access the spare wheel.

F Remove the wheel trim.

F Loosen the wheel bolts and start
unscrewing them.
F Unscrew the bolt using the wheelbrace until

the carrier is lowered fully.
F Detach the carrier from the hook and place

the spare wheel near the wheel to be F Raise the vehicle until there is sufficient
changed. space between the wheel and the ground to
fit the spare (not punctured) wheel easily.
F Resume and complete the unscrewing of
Removing the wheel with a F Position the foot of the jack on the ground the wheel bolts.
punctured tyre and ensure that it is directly below the F Remove the bolts and then remove the
front or rear jacking point provided on the wheel.
underbody, whichever is closest to the
wheel to be changed.
F Extend the jack until its head comes into
contact with the jacking point being used;
8
the vehicle's contact area A must be
engaged with the central part of the head of
the jack.
Fitting the spare wheel F Carry out an initial tightening of the bolts
Ensure that the jack is stable. The foot
using the wheelbrace.
of the jack must be in contact with the
ground and directly below the jacking
point used. When using a non-uniform spare wheel,
If the ground is slippery or loose, the jack do not exceed 50 mph (80 km/h).
may slip or drop – Risk of injury! The spare wheel is not designed to
Ensure that the jack is positioned only at be used over long distances. Have
one of jacking points under the vehicle, the tightening of the bolts and the tyre
making sure that the vehicle's contact pressure of the spare wheel checked by a
surface is centred on the head of the CITROËN dealer or a qualified workshop
jack. as soon as possible.
Otherwise, there is a risk of damage to Also, have the original wheel repaired
the vehicle and/or of the jack collapsing – and refitted by a CITROËN dealer or a
Risk of injury! qualified workshop as soon as possible.
Do not extend the jack until you have
started unscrewing the bolts on the wheel
to be changed and have placed the chock
under the wheel diagonally opposite. F Position the wheel on the hub and start F Lower the vehicle completely by folding the
tightening the bolts by hand. jack, then remove the jack.
F Tighten the wheel bolts again using the
wheelbrace; tighten them fully without
forcing them.
F Place the wheel to be repaired in the carrier.
For more information on identification

markings, including the tyre label, refer to
For more information on tyre under-

inflation detection, including
recommendations after changing a wheel
with a tyre under-inflation detection
sensor, refer to the corresponding section.
- Make sure that the wheel trim's outer edge is

F Secure the carrier on the hook, then raise not pressed against the rim or lowered into it:
the carrier by tightening the bolt with the
wheelbrace.
Fitting the wheel trim on
F Tighten the bolt fully and check that the the rim
wheel is held flat against the floor.
If not, repeat the procedure.
The valve of the wheel must be centred against

Never go underneath a vehicle that is the notch on the wheel trim.
supported only by a jack (use an axle stand). This position is essential to fit the wheel trim
8
Never use an electric screwdriver instead of properly on the metal rim. (In case of incorrect
the wheelbrace. positioning of the valve in line with the notch,
the anti-rotation system will be in contact with
the bolt heads and may be damaged if the user
Refitting the repaired wheel persists in fitting the wheel trim in this incorrect
position). Correct wheel trim position.
The wheel is refitted in the same way as the
spare wheel; don't forget to refit the wheel trim.
Incorrect wheel trrim position. Incorrect valve position: below the ring.
- Briskly hit with the palm of the hand the

tab opposite the valve (the last fixing tab,
always in the clipping direction).
- Be sure to pre-clip all fixing tabs except the
last (opposite the valve cut-out). Distortion of the edge of the wheel trim at the
Check the position of the wheel valve valve due to incorrect fitting.
in relation to the ring of the wheel trim.
Type B
Changing a bulb
Types of bulb
Bayonet bulb: press on the bulb then turn it

anti-clockwise.
Type C
Correct valve position: above the ring.
Comply with the wheel trim fitting

procedure to avoid breaking of the Halogen bulb: release the retaining spring from
fixing tab and distortion the edge of Various types of bulb are fitted to your vehicle. its housing.
the wheel trim. To remove them:
Type D
Type A
8
Light emitting diode (LED): to replace the
daytime running lamps, consult a CITROËN
All glass bulb: pull gently as it is fitted by
pressure.
Open the bonnet. To access the bulbs, reach Front lamps Dipped beam headlamps/Main
behind the headlamp unit. beam headlamps
Carry out the operations in reverse order to
refit each bulb and check that the bonnet is Type C, H4 – 55W
closed securely. F Remove the centre cover by pulling on the
flexible rubber tab.
F Disconnect the electrical connector.
F Release the retaining tab.
Halogen bulbs must be changed with the F Change the bulb taking care to align the
headlamps off. Wait a few minutes (risk metal part with the grooves on the lamp.
of serious burns). Do not touch the bulb F Reposition the retaining tab.
directly with your fingers, use a lint-free F Ensure that the cover is refitted correctly all
cloth. around to ensure correct sealing.
It is normal for condensation to form inside
the headlamps. Regular use of the vehicle Sidelamps
eliminates this misting.
Type A, W5W – 5W
The bulbs must be changed with the
ignition off or the battery disconnected.
F Remove the cover by pulling on the flexible
Wait approximately three minutes after
rubber tab.
changing the bulb before reconnecting the
F Remove the pressure-mounted lamp holder
battery.
by pulling the connector.
Check that the lamps are working properly
F Change the bulb.
after each operation.
F Ensure that the cover is refitted correctly all
around to ensure correct sealing.
High-pressure jet wash Direction indicators

Type B, PY21W – 21W (amber)
When using this type of washer on 1. Dipped beam headlamps.
F Remove the cover by pulling on the flexible
stubborn dirt, do not persist on the 2. Sidelamps
rubber tab.
headlamps, the lamps and their edges to 3. Direction indicators. F Turn the bulb holder a quarter turn
avoid damaging their coating and seals.
anticlockwise.
F Remove the bulb by pressing lightly on it, Side repeater

then turning it anti-clockwise.
F Change the bulb. Type A, WY5W – 5W (amber)
F Ensure that the cover is refitted correctly all
around to ensure correct sealing.
Foglamps
Type C, H1 – 55W
F Remove the bulb holder by squeezing the

two clips (top and bottom) using a thumb
and forefinger.
F Change the module (bulb holder and bulb).
F Follow these steps in reverse order to refit
F Push the repeater towards the rear and
the module and the mudflap.
disengage it by pulling it forwards.
F Contact a CITROËN dealer to obtain a new
repeater, which is a sealed component.
F To fit it, engage the repeater towards the
rear and then bring it towards the front.
F Remove the three clips and the bolt

securing the mudflap, located under the
bumper.
8
F Move the mudflap upwards.
F Disconnect the bulb holder connector by
pressing the tab at the top.
Courtesy lamps Rear lamps High pressure jet wash

When using this type of washer on
Type A, 12V5W – 5W
stubborn dirt, do not persist on the
headlamps, the lamps and their edges to
avoid damaging their coating and seals.
This procedure requires the use of the spanner

supplied with the tools for changing a wheel.
For more information on changing a

wheel, refer to the corresponding section.
1. Brake lamps/sidelamps F Identify the failed bulb then open the rear
Type B, P21/5W – 21/5W doors to 180°.
Front/Rear 2. Direction indicators
F Unclip the lens by inserting a thin Type B, PY21W – 21W (amber)
For more information on the side-hinged
screwdriver into the slots at each side side 3. Reversing lamps
rear doors and in particular on opening
of the courtesy lamp. Type B, P21W – 21W
them to 180°, refer to the corresponding
F Pull out the bulb and change it. 4. Foglamps section.
F Clip the lens in place and ensure that it is Type B, P21W – 21W
secure.
For more information on types of bulb, refer to
F Remove the faulty bulb by pressing it lightly F Remove the plastic lens using a
while turning it anti-clockwise. screwdriver.
F Change the bulb. F Change the bulb.
F Refit the plastic lens and press on it.
When removing the lamp unit:

F with tailgate, pull the lamp unit towards the
centre of the vehicle, With side-hinged doors
F with side-hinged doors, pull the lamp unit
towards you.
When refitting, take care to reposition

the tabs and the wiring correctly to avoid
trapping the wiring.
F Remove the two fixing bolts using the
spanner provided. After changing a rear direction indicator
F Pull the lamp unit from the outside. bulb, the reinitialisation time is more than
F While holding the lamp, disconnect the approximately 2 minutes.
electrical connector.
Number plate lamps
Type A, W5W – 5W F Unclip the interior trim.

F Disconnect the connector by moving aside
With tailgate
8
its tab.
F Turn the bulb holder a quarter turn
anticlockwise.
F Change the bulb.
F Put the bulb holder back in place and
reconnect the connector.
F Put the trim back in place.
F Move aside the 4 tabs, then extract the bulb
holder.
Third brake lamp Removing and fitting a fuse

Type A, W16W – 16W
- in the lower dashboard on the left-hand side

Good Failed
(behind the cover).
- under the bonnet (near the battery).
Before changing a fuse, the cause of the fault
must be found and rectified.
If fitted on your vehicle, an
additional fuse box is provided
for towing, the towbar and the
connections for body and platform
cab conversions. It is located on
the right-hand side behind the
F Unscrew the two nuts.
load stop partition.
F Push the pins. F Use the tweezers.
F If necessary, disconnect the connector to The information given concerns only those Always replace a faulty fuse with a fuse of
remove the lamp. fuses which can be changed by the user using the same rating.
F Change the bulb. the tweezers located behind the dashboard
open storage compartment on the right-hand
CITROËN accepts no responsibility for the
side. For any other work, visit a CITROËN
Changing a fuse dealer or a qualified workshop.
cost incurred in repairing your vehicle or
for rectifying malfunctions resulting from
The fuse boxes are located: the installation of accessories not supplied
or not recommended by CITROËN and
not installed in accordance with the
Professional repairers: for complete
specifications, in particular when the
information on the fuses and relays,
combined power consumption of all of the
consult the wiring information and
additional equipment connected exceeds
diagrams available through the dealer
10 milliamperes.
network.
Dashboard fuses Fuses Amps

Allocation
F A
Tilt the cover to access the fuses.
1 15 Rear wiper
– Free
2
30 Central locking
3 5 Airbags
Air conditioner, diagnostic socket, rearview mirror control,
4 10
headlamp beam.
5 30 Electric windows
6 30 Locks
7 5 Rear courtesy lamp, front map reading lamps, ceiling lamp.
8 20 Audio system, display screen, under-inflation detection, alarm and siren
9 30 Front and rear 12 V socket
10 15 Centre console
11 15 Low current anti-theft
8
12 15 Rain and sunshine sensor, airbags.
13 5 Instrument panel
Parking sensors, automatic air conditioning controls, Hands-
14 15
free kit
15 30 Locks
16 - Free
17 40 Rear screen/rearview mirror demisting.
Passenger compartment fuses Towing/towbar/

coachbuilder/platform cab
fuses
The designations given are only indicative, as

this additional box relates to other information
which depends on converter/coachbuilder, for
which the handbook cannot provide technical
support.
Fuses Amps
Allocation
F A
1 - Free
2 20 Heated seats
3 - Free
Folding rearview
4 15
mirror relays
Refrigeration
5 15 equipment socket Fuses F Amps A Allocation
relay
1 15 Free
2 15 Contact relay, optional generator
3 15 12 V trailer power supply
4 15 Continuous power supply for converters/coachbuilders
5 40 Hazard warning lamps
Underbonnet fuses Fuses Amps

Allocation
F A
After opening the bonnet, unclip and tilt the
1 20 Engine management
corresponding box to access the fuses.
2 15 Horn
3 10 Front and rear screenwash pump
– Free
4
20 LED
5 15 Engine components
6 10 Steering wheel angle sensor, ESC
7 10 Brake switch, clutch switch
8 25 Starter
9 10 Headlamp adjustment motor, vehicle data recording control unit
10 30 Engine components
11 40 Free
8
12 30 Wipers
13 40 Built-in systems interface
14 30 Pump
15 10 Right-hand main beam headlamp
16 10 Left-hand main beam headlamp
17 15 Right-hand dipped beam headlamp
18 15 Left-hand dipped beam headlamp
Charging the battery using F Connect the other end of the green or black
Battery cable to an earth point on the broken down
Procedure for starting the engine using another
a battery charger vehicle, as far away as possible from the
battery or charging a discharged battery. F Disconnect the battery. battery.
F Follow the instructions for use provided by F Operate the starter, let the engine run.
the manufacturer of the charger. F Wait for the engine to return to idle, then
F Reconnect starting with the negative (-) disconnect the cables.
terminal.
F Check the condition of the terminals and
It is advisable to disconnect the battery if
clamps. If they are covered with sulphate
the vehicle is to be left unused for more
(whitish or greenish deposits), disconnect
than one month.
them and clean them all.
The presence of this label, in particular
with the Stop & Start system, indicates Wait 2 minutes after switching off the ignition
the use of a 12 V lead-acid battery with Starting using another before disconnecting the battery.
special technology and specification; battery Never disconnect a terminal when the engine
the involvement of a CITROËN dealer or is running.
a qualified workshop is essential when Never charge a battery without first
replacing or disconnecting the battery. disconnecting the terminals.
Failure to observe these recommendations After each time that the battery has been
may cause premature wear of the battery. reconnected, switch on the ignition and wait
1 minute before starting the engine, to allow
the electronic systems to initialise. However,
if minor problems persist after this procedure,
contact a CITROËN dealer or a qualified
After refitting the battery, the Stop & Start workshop.
will only be active after a continuous After changing a bulb, wait approximately
period of immobilisation of the vehicle, the 3 minutes before reconnecting the battery.
duration of which depends on the climatic
conditions and the state of charge of the
F Connect the red cable to the (+) terminals of
battery (up to about 8 hours).
the two batteries.
The Stop & Start battery does not have to
F Connect one end of the green or black
be disconnected for charging.
cable to the (-) terminal of the additional
battery.
Economy mode Towing your vehicle Vehicles fitted with a manual gearbox
(diesel version)
When the engine is switched off and the key is
For vehicles fitted with a manual gearbox,
left in the ignition on position, certain functions
the gear lever must be in neutral. Failure
(windscreen wipers, electric windows, courtesy
to observe this special condition could
lamps, audio system, etc.) can be used for
result in damage to the transmission and
a combined duration of no more than thirty
braking components and to the absence
minutes, so as not to discharge the battery.
of braking assistance when the engine is
After thirty minutes the active functions are
started again.
put on standby and the battery warning lamp
flashes with a message displayed in the
screen.
In order to restore the use of these functions From the front
immediately, start the engine and let it run for a
few minutes.
The time available to you will then be double
the period for which the engine is left running.
However, this period will always be between
This procedure requires the use of the towing
five and thirty minutes.
eye supplied with the wheel changing tools.
The engine will not start if the battery is

discharged.
For more information on changing a
wheel and in particular the tools, refer to
8
F Unclip the cover by pressing on the lower
part of it.
F Screw the removable towing eye in fully.
From the rear General recommendations Running out of fuel

Observe the legislation in force in your
country.
(diesel)
Ensure that the weight of the towing The system must be primed if you run out of
vehicle is higher than that of the towed fuel.
vehicle.
The driver must remain at the wheel of
the towed vehicle and must have a valid
BlueHDi engine
driving licence. F Fill the fuel tank with at least five litres of
When towing a vehicle with all four diesel.
wheels on the ground, always use an F Switch on the ignition (without starting the
approved towing arm; rope and straps are engine).
prohibited. F Wait around 6 seconds and switch off the
The towing vehicle must move off gently. ignition.
When the vehicle is towed with its engine F Repeat the operation 10 times.
off, there is no longer braking and steering F Operate the starter to run the engine.
F Unclip the cover using a coin or the flat part assistance.
of the towing eye. In the following cases, you must always
F Screw the removable towing eye in fully. call on a professional recovery service: Other HDi engines
- vehicle broken down on a motorway or
main road, F Fill the fuel tank with at least five litres of
Lifting (only 2 wheels on - four-wheel drive vehicle, diesel.
the road) - when it is not possible to put the F Actuate the manual priming pump located
It is preferable to raise the vehicle using gearbox into neutral, unlock the under the bonnet under the protective cover.
professional lifting equipment. steering, or release the parking brake, F Operate the starter until the engine starts.
- towing with only two wheels on the
ground,
- where there is no approved towbar
available.
Technical data
The GTW values and the towed loads listed are

Characteristics of engines valid for a maximum altitude of 1,000 metres.
If the exterior temperature is high, it is
and towed loads The towed load must be reduced by steps of
recommended that the engine is allowed
to idle for 1 to 2 minutes after the vehicle
10% for each additional 1,000 metres.
comes to a stop, to facilitate its cooling.
The maximum authorised nose weight
corresponds to the weight permitted on the
Engines towbar.
The engine specifications (capacity, max.
power, max. speed, energy, CO2 emissions,
etc.) associated with your vehicle are indicated
on the registration document, as well as in GTW: Gross train weight.
sales brochures.
These characteristics correspond to the values
type-approved on a test bed, under conditions When exterior temperatures are high,
defined in European legislation (Directive the vehicle performance may be limited
1999/99/EC). in order to protect the engine. When the
For more information, contact a CITROËN exterior temperature is higher than 37°C,
dealer or a qualified workshop. limit the towed weight.
Weights and towed loads Towing using a lightly loaded vehicle can
adversely affect roadholding.
The weights and towed loads relating to Braking distances are increased when
your vehicle are indicated on the registration towing a trailer.
document, as well as in sales brochures. When using a vehicle to tow, never
exceed a speed of approximately 60 mph
These values are also indicated on the (100 km/h) (observe the local legislation
manufacturer's plate or label. in force).
For more information, contact a CITROËN

9
Technical data
Petrol engines/weights
Five seats
Engine oil capacity with Recommended nose

Engines Gearbox Unbraked trailer (kg)
filter replacement (litres) weight (kg)
1.6 110 hp Manual 5-speed 3.25 750 55
1.6 VTi 100 hp Manual 5-speed 4.25 600 70
1.6 VTi 120 hp Manual 5-speed 4.25 690 70
1.6 VTi 120 hp Euro 6 Manual 5-speed 4.25 600 70
1.2 PureTech S&S 110 hp

Manual 5-speed 3.45 600 70
Euro 6
Seven seats

1.6 110 hp Manual 5-speed 3.25 750 70
Technical data
Diesel engines/weights
Five seats

1.6 HDi 75 hp Manual 5-speed - 600 70
1.6 HDi 75 hp PF Manual 5-speed - 715 70
BlueHDi 75 hp Euro 6 Manual 5-speed - 720 70
1.6 HDi 90 hp Manual 5-speed 3.75 735 70
1.6 HDi 92 hp PF Manual 5-speed 3.75 715 70
1.6 e-HDi 92 hp PF Manual 5-speed 3.75 690 70
1.6 BlueHDi 100 hp Euro 6 Manual 5-speed 3.75 600 70
Manual 5-speed 600 70

1.6 BlueHDi 100 S&S 3.75
Electronic 6-speed 600 70
9
PF: particle filter.

e-HDi: model fitted with Stop & Start.
Technical data
Seven seats

1.6 BlueHDi 100 hp Euro 6

Manual 5-speed 3.75 600 70
S&S
PF: particle filter.

e-HDi: model fitted with Stop & Start.
Technical data
Dimensions
9
Technical data
L Overall length 4,380
H Overall height 1,801-1,862
A Wheelbase 2,728
B Front overhang 925
C Rear overhang 727
without mirrors 1,810

D Width over panels
with mirrors 2,112
E Front track width 1,505-1,507
F Rear track width 1,554-1,556
Row 2 990
- Length of the loading surface up to the seat Row 2, seat in the fully folded position 1,343
With front passenger seat folded 3,000
Technical data
Rear doors (mm) Side-hinged doors

Tailogate
Small Large
Maximum boot sill height with
M 205/65 R15 tyres and tailgate 582
trim
Useable height of the opening
N 1,118
(under under panel)
O Useable width 495 543 1,582
9
Technical data
Sliding side doors (mm)
P Useable height 1,009
Q Useable width 640
- Height under raised tailgate 1,892
Technical data
Van (mm)
Your vehicle is available in two lengths (L1 and L2).
L1: 3.3 m³
L2: 3.7 m³
9
Technical data
Short – L1 Long – L2
625 850 750
L Overall length 4,380 4,628
A Wheelbase 2,728
C Rear overhang 727 975
without mirrors 1,810

D Width over panels
with mirrors 2,112
E Front track width 1,505
F Rear track width 1,554
G Rear floor useable length 1,800 2,050
I Useable length with front passenger seat folded 3,000 3,250
Technical data
Rear doors (mm) L1 – 625 L1 – 850 L2
Maximum boot sill height with

M 584 609 612
tyres 195/65 R15
Side-hinged doors
Tailgate
Small Large
Useable height of the opening

N 1,148 1,313
(under panel)
O Width 495 543 1,582
9
Technical data
Sliding side door (mm)
L1 L2
P Useable height 1,100
Q Useable width 650
- Height under raised tailgate 1,892
Technical data
Platform cab (mm)
L Overall length 4,237
A Wheelbase 2,728
C Rear overhang 584
D Width over panels (without mirrors) 1,810
E Front track width 1,505
9
F Rear track width 1,554
Technical data
Identification markings B. Serial number

This is engraved on the front right wheel arch.
C. Tyres and paint colour

code
The label C, on the front door specifies:

- the wheel and tyre sizes,
- the tyre pressures, unladen and laden,
- the spare tyre pressure,
- the paint colour code.
A. Manufacturer's plate.
1. VT type and serial number.
The tyre pressures should be checked
2. Gross vehicle weight (GVW). when cold, at least once a month.
3. Gross train weight (GTW).
4.1. Maximum weight on the front axle.
4.2. Maximum weight on the rear axle.
7-inch touch screen tablet
7-inch touch screen tablet First steps

Use the buttons provided above the touch
screen tablet to access the menu carousel,
then press the virtual buttons in the touch
screen tablet.
Each menu is displayed in one or two pages
(primary page and secondary page).
In very hot conditions, the system may

go into standby (screen and sound
completely off) for a minimum period of
5 minutes.
Short-cuts: using the virtual buttons in the

upper band of the touch screen tablet, it is the
possible to go directly to the selection of audio
source, the list of stations (or titles, depending
GPS satellite navigation The system is protected in such a way that on the source).
– Multimedia audio – it will only operate in your vehicle.
Bluetooth® telephone
Contents
First steps 1 For safety reasons, the vehicle must
Steering mounted controls 2 always be stationary for the driver to
Menus 3 perform operations that require close
Navigation 4 attention.
Radio 7 The display of the energy economy mode
DAB (Digital Audio Broadcasting) radio 8 message signals that the system is about
Media 9 to go into standby. Refer to the Energy
.
Settings 11 Economy Mode section.
Connected services 12 Selecting the audio source (depending on
Telephone 14 version):
Frequently asked questions 17
- FM/DAB*/AM* radio stations. Restore the sound by pressing one of the two
- USB stick. volume buttons.
Steering mounted controls
- Smartphone via MirrorLinkTM or CarPlay ®. Radio: select previous/next preset
- Telephone connected via Bluetooth®* In very hot conditions, the volume may be station.
and Bluetooth® multimedia broadcast* limited to protect the system. The return to Media: select the genre/artist/
(streaming). normal takes place when the temperature folder from the list depending on
- Media player connected via the auxiliary in the passenger compartment drops. classification.
socket (jack, cable not supplied). Select the previous/next item in a
* Depending on equipment. menu.
The screen is of the "resistive" type, it is

Radio: automatic search for a higher
necessary to press firmly, particularly for
frequency.
"flick" gestures (scrolling through a list,
Media: select the next track.
moving the map, etc.). A simple swipe will
Media, press and hold: fast forward.
not be enough. Pressing with more than
Skip in the list.
one finger is not recognised.
The screen can be used with gloves. This
technology allows use at all temperatures.
Change the audio source.

Confirm a selection.
Press Menu to display the menu Pick up/hang up telephone.
carousel. Press for more than 2 seconds:
To clean the screen, use a soft non-
abrasive cloth (spectacles cloth) without access the telephone menu.
Volume adjustment (each source is
independent, including traffic announcements any additional product.
(TA) and navigation instructions). Do not use sharp objects on the screen. Radio: automatic search for a lower
Do not touch the screen with wet hands. frequency.
Increase volume. Media: select the previous track.
Media, press and hold: fast back.
Decrease volume. Skip in the list.
Mute by pressing the volume increase and

decrease buttons simultaneously.
Increase volume. Connected services Telephone

(Depending on equipment) Connect a telephone by Bluetooth®.
Access the CarPlay ® function after
Decrease volume. Operate certain applications on connection of your smartphone by
your smartphone via MirrorLinkTM or USB cable.
CarPlay ®.
Mute on: cut the sound by
simultaneously pressing the volume
up and down buttons.
Mute off: press one of the two
volume buttons.
Menus Radio Media Settings

Navigation Select an audio source, a radio Adjust the settings for sound
station, display photographs. (balance, ambience, etc.), colour
(Depending on equipment)
schemes and the display (language,
units, date, time, etc.).
Enter navigation settings and
choose a destination.
.
3
Driving Select Save to save the address entered as a To a recent destination

contact.
Access the trip computer. The system allows up to two hundred contacts.
Activate, deactivate or configure Press Navigation to display the
certain vehicle functions. primary page.
Select "Guide to".
Press the secondary page.
Choose the navigation criteria: Select "Enter destination".

"Fastest" or "Shortest" or "Time/
Distance" or "Ecological".
Select an address from the list offered.
Choose the restriction criteria: Select "Navigate to".

Navigation "Tolls", "Ferries", "Traffic", "Strict",
"Close".
Choice of a profile Select the criteria then "Confirm" or
Select "Confirm". press "Show route on map" to start
To a new destination
navigation.
Press Navigation to display the Or
primary page.
Press "See route on map" to start the
navigation. To a contact in the
Press the secondary page. To delete navigation information, press directory
"Settings".
Select "Enter destination". Press "Stop navigation". To be able to use navigation "to a contact
in the directory", it is first necessary to
To resume navigation, press "Settings".
enter the address for your contact.
Select "Address".
Press "Resume navigation".
Set the "Country" in the list offered then the
"Town" or its postcode in the same way, the Press Navigation to display the
"Street", the "No.". primary page.
Confirm each time.
Press on the secondary page. Select the criteria then "Confirm" or Select "Search for POI".
press "Show route on map" to start
Select "Enter destination". navigation.
Select "All POIs",
Select "Contacts". Or
To a point on the map "Vehicle",
Select the desired destination from the
Press Navigation to display the Or
contacts in the list shown.
primary page.
"Dining/hotels".
Select "Navigate to".
Press the secondary page. An annual mapping update allows new
points of interest to be presented to you.
Select the criteria then "Confirm" to Select "Enter destination". You can also update the Risk areas/
start navigation. Danger zones every month.
The detailed procedure is available on the
Brand's website.
To GPS coordinates Select "On the map".
Press Navigation to display the Zooming in on the map shows points with
primary page. information.
A long press on a point opens its content.

Press the secondary page. Configuration of the Risk
areas/danger zones alerts
Select "Enter destination".
Press Navigation to display the
To points of interest (POI)
primary page.
Select "Address". Points of Interest (POI) are listed in different

categories. Press the secondary page.
Enter the "Longitude:" then the "Latitude:".
Press Navigation to display the Select "Settings".
.
primary page.
Select "Navigate to".
Press the secondary page. Select "Alert!".
It is now possible to activate Risk areas alerts "Around", Select:

then: - "Be advised of new messages",
- "Audible warning" "Near destination", to fine-tune the list of - "Speak messages",
- "Alert only when navigating" messages. Then enter the filter radius.
- "Alert only for overspeed"
Press again to remove the filter.
- "Display speed limits"
- "Timing": the choice of timing allows the
time before giving a Risk areas alert to be Select the message from the list offered. Select "Confirm".
defined.
Select "Confirm". Select the magnifying glass to have We recommend a filter radius of:
spoken information. - 12 miles (20 km) in urban areas,
This series of alerts and displays is only - 30 miles (50 km) on motorways.
available if Risk areas have first been
TMC (Traffic Message Channel)
downloaded and installed on the system.
messages on GPS-Navigation contain
Play TA messages
traffic information transmitted in real time. Press Navigation to display the
primary page.
Traffic information
Setting filters Press on the secondary page.
Display of messages Select "Settings".
Press Navigation to display the
Press Navigation to display the primary page.
primary page.
Select "Voice".
Press on the secondary page.
Press on the secondary page.
Select "Settings". Activate/Deactivate "Traffic (TA)".
Select "Traffic messages".
Select "Traffic options".

Choose filter settings for:
"On the route",
Select a radio station from the list offered.

The TA (Traffic Announcement) function Radio reception may be affected by the
gives priority to TA alert messages. Select "Update list" to refresh the use of electrical equipment not approved
To operate, this function needs good list. by CITROËN, such as a USB charger
reception of a radio station that carries this connected to the 12 V socket.
type of message. While traffic information The external environment (hills, buildings,
To select a preset radio station.
is being broadcast, the current medium is tunnels, basement car parks, etc.) may
automatically interrupted so that the TA block reception, including in RDS mode.
message can be heard. Normal play of the Press Radio Media to display the This is a normal effect of the way in
medium previously playing is resumed at primary page. which radio waves are transmitted and
the end of the message. does not indicate any failure of the audio
equipment.
Select "Preset".
Select a preset radio station in the list.

Radio
If necessary, select change of source. Changing a frequency
Selecting a station
Select "FM Radio". Press Radio Media to display the
Press Radio Media to display the
primary page.
primary page.
Or By automatic frequency search

Select "List" in the primary page.
"AM Radio". Press 3 or 4 or move the cursor for an
automatic search down or up for a radio
Or frequency.

THEN
primary page.
Select change source.
Press the secondary page. Select "FM Radio".
.
Select "Radio list" on the
secondary page.
Or
"AM Radio". A long press on a number saves (presets) the

RDS, if activated, allows you to
station.
continue listening to the same station
Or by automatically retuning to alternative
OR frequencies. However, in certain conditions,
A press on the button in the upper-right part of
coverage of an RDS station may not be
Press Radio Media to display the the screen presets all of the stations one after
assured throughout the entire country as
primary page. the other.
radio stations do not cover 100% of the
territory. This explains the loss of reception
Press the secondary page. of the station during a journey.
Recalling preset stations
Press "Frequency".
Press Radio Media to display the DAB (Digital Audio
THEN primary page.
Broadcasting) radio
Enter the frequency in full (e.g.: Select "Preset".
92.10 MHz) using the keypad then Digital radio
"Confirm".
Activating/Deactivating RDS Digital radio provides higher quality
Changing radio station reception and also the graphical display
Pressing the name of the current radio station Press Radio Media to display the of current information on the radio station
brings up a list. primary page. being listened to. Select "List" in the
To change radio station press the name of the primary page.
desired station. Press the secondary page. The different multiplexes offer a choice
of radio stations arranged in alphabetical
order.
Presetting a station Select "Settings".
Select a radio station or frequency (refer to the Press Radio Media to display the
corresponding section). Select "Radio". primary page.
Press "Preset".
Activate/Deactivate "RDS options". Select change of source.
Select a number in the list to preset the
previously chosen/set radio station. Select "DAB Radio".
Select "List" in the primary page.

If "DAB/FM station tracking" is activated, To protect the system, do not use a USB
or
there is a delay of a few seconds when the hub.
Select "Radio list" on the
system switches to analogue radio "FM",
secondary page.
sometimes with a change in volume.
Once the digital signal quality is restored, The system builds playlists (in temporary
the system automatically changes back memory), an operation which can take from
Select a radio station from the list offered. to "DAB". a few seconds to several minutes at the first
connection.
Reduce the number of non-music files and the
DAB/FM station tracking number of folders to reduce the waiting time.
The playlists are updated each time the ignition
If the "DAB" station being listened to is
"DAB" does not cover 100% of the is switched off or a USB stick is connected.
not available on "FM" ("DAB/FM" option
territory. However, the audio system memorises these
greyed out), or "DAB/FM station tracking"
When the digital radio signal is poor, lists, and the loading time will be reduced if
is not activated, the sound will cut out
the "DAB/FM station tracking" allows they have not been changed.
while the digital signal is too weak.
you to continue listening to the same
station, by automatically switching to the
corresponding FM analogue station (if Auxiliary Socket (AUX)
there is one).
Media
USB port
primary page.
Select "Settings".
This source is only available if the "Auxiliary
socket" option has been activated in the
"Media" settings.
.
Select "Radio". Insert the USB memory stick into the USB port
or connect the USB device to the USB port
Select "Digital/FM tracking" then "Confirm".
using a suitable cable (not supplied).
Connect the portable device (MP3 player, etc.) Information and advice To protect the system, do not use a USB
to the jack socket using an audio cable (not
hub.
supplied). The audio equipment will only play audio files
First adjust the volume of your portable device with ".wma", ".aac", ".flac", ".ogg" and ".mp3"
(to a high level). Then adjust the volume of your file extensions and with a bit rate of between
audio system. 32 Kbps and 320 Kbps. It is recommended that the USB cable for
Operation of controls is via the portable device. It also supports VBR (Variable Bit Rate) mode. the portable device is used.
No other file types (".mp4", etc.) can be read.
Files of the ".wma" type should be to the wma
Selecting the source

9 standard. Bluetooth® audio streaming
The sampling rates supported are 32, 44 and
48 kHz. Streaming allows music files on the telephone
to be played via the vehicle's loudspeakers.
primary page.
It is advisable to restrict file names to 20
Connect the telephone: see the "Telephone"
Select change of source. characters, without using special characters
section then "Bluetooth ® ".
(e.g.: " ? .; ù) in order to avoid any reading or
Choose the "Audio" or "All" profile.
display problems.
If play does not start automatically, it may be
necessary to start the audio playback from the
The system supports USB mass storage
telephone.
devices, BlackBerry ® devices or Apple ®
Control is from the portable device or by using
players via USB ports. The adapter cable
the audio system buttons.
is not supplied.
Device management is via the audio
Choose the source. system controls.
Once connected in streaming mode, the
Other devices not recognized by the
telephone is considered to be a media
The steering mounted SRC (source) system during connection must be
source.
button can be used to go to the next connected to the auxiliary socket using a
It is recommended that you activate
media source, available if the source Jack cable (not supplied).
"Repeat" on the Bluetooth® device.
is active.
Use only USB memory sticks formatted FAT 32

(File Allocation Table).
Connecting Apple® players Settings The audio settings (Ambience, Bass,

Treble and Loudness) are different and
Audio settings independent for each sound source.
The settings for "Distribution" and
Press Settings to display the
"Balance" are common to all sources.
primary page.
Select "Audio settings".
Connect the Apple ® player to the USB port Select "Ambience". - "Ambience" (choice of 6 musical ambiences).
using a suitable cable (not supplied). - "Bass".
Play starts automatically. Or
- "Treble".
"Distribution". - "Loudness" (Activate/Deactivate).
Control is via the audio system controls. - "Distribution" ("Driver", "All passengers",
Or
"Front only").
"Sound effects". - "Audible response from touch screen".
The classifications available are those of - "Volume linked to speed" (Activate/
Or Deactivate).
the portable device connected (artists/
albums/genres/playlists/audiobooks/ "Ringtones".
podcasts).
Or Onboard audio: Arkamys© Sound Staging
The default classification used is by
artists. To change the classification used, optimises the distribution of sound in the
"Voice".
return to the first level of the menu then passenger compartment.
select the desired classification (playlists
for example) and confirm to go down The sound distribution (or spatialisation
through the menu to the desired track. with the Arkamys © system) is audio
processing that allows the quality of the
sound to be adapted according to the Colour schemes
number of passengers in the vehicle.
Press Settings to display the
.
The version of software in the audio system Available only with the 6-speaker
primary page.
may not be compatible with the generation of configuration.
your Apple ® player.
Select "Colour schemes". Select "Delete data" to delete the list of recent
The system does not automatically
destinations, personal points of interest,
manage the change between winter and
contacts in the directory.
summer time (depending on country).
Select the colour scheme in the list
then "Confirm". Tick the settings then select
"Delete". Select "Languages" to change the
language.
At each change of colour scheme the Select "Factory settings" to return to the
system restarts, showing a black screen original settings. Select "Calculator" to display a
for a few moments. Press Settings to display the calculator.
primary page.
Select "Calendar" to display a
calendar.
As a safety measure, the procedure
for changing the colour scheme is only Select "Screen settings".
possible with the vehicle stationary.
Connected services
Activate or deactivate: "Activate
Changing system settings automatic text scrolling" and MirrorLinkTM
"Activate animations".
MirrorLinkTM smartphone
Press Settings to display the connection
primary page. Press Settings to display the
primary page.
As a safety measure and because it
Press on the secondary page. requires sustained attention by the driver,
Press the secondary page. using a smartphone when driving is
Select "System Settings". prohibited.
Select "Time/Date" to change the
time zone, synchronisation with All operations must be done with the
GPS, the time and its format, then vehicle stationary.
Select "Units" to change the units of distance, the date.
fuel consumption and temperature.
When connecting a smartphone If only one application has been downloaded to

The synchronisation of a smartphone
to the system, it is recommended the smartphone, it starts automatically.
allows users to display the smartphone's
that Bluetooth ® is started on the
applications adapted to the Access to the different audio sources remains
smartphone.
MirrorLinkTM technology on the vehicle accessible in the margin of the MirrorLinkTM
screen. display, using touch buttons in the upper bar.
Connect a USB cable. The
The principles and standards Access to the system’s menus is possible at
smartphone charges when
are constantly changing, for the any time using the dedicated buttons.
connected by a USB cable.
communication process between the
smartphone and the system to operate,
it is essential that the smartphone is Voice recognition
unlocked; update the operating system of
the smartphone as well as the date and From the system, press "Connected Press the end of the lighting control stalk to
time of the smartphone and the system. services" to display the primary start the voice recognition of your smartphone
For the list of supported smartphones, go page. via the system.
to the brand's website in your country. Voice recognition requires the use of a
Press "MirrorLinkTM" to start compatible smartphone first connected to the
the application of the system. vehicle by Bluetooth.
CarPlay®
Start the application on the
As a safety measure, some applications
can only be viewed with the vehicle
smartphone (optional, depending CarPlay® smartphone connection
on the smartphone and operating
stationary; display is interrupted once the
system).
vehicle is moving.
During the procedure, several screen As a safety measure and because it

pages relating to the association of requires sustained attention by the driver,
Please note: using a smartphone when driving is
certain functions are displayed.
- if your smartphone is supported, to prohibited.
Accept to start and end the
make it "MirrorLinkTM" compatible, All operations must be done with the
connection.
some phone manufacturers vehicle stationary.
.
nevertheless invite you to first Once the connection is established, a page
download a dedicated application. is displayed with the applications already
downloaded to your smartphone and adapted
to MirrorLinkTM technology.
Or Voice recognition
The synchronisation of a smartphone
allows users to display the smartphone's Connect a USB cable. The Press the end of the lighting control stalk to
applications adapted to the smartphone charges when start thye voice recognition of your smartphone
CarPlay ® technology on the vehicle connected by the USB cable. via the system.
screen.
As the processes and standards are
constantly changing, it is recommended Telephone
that you keep your smartphone's operating From the system, press "Connected
system updated. services" to display the primary Pairing a Bluetooth®
For the list of supported smartphones, go page. telephone
to the brand's website in your country.
Press "CarPlay" to display the For reasons of safety and because

CarPlay ® interface. it requires sustained attention by the
driver, the pairing of a Bluetooth® mobile
As a safety measure, some applications telephone with the hands-free system of
can only be viewed with the vehicle your audio system must be done with the
stationary; display is interrupted once the During the procedure, one or more screen vehicle stationary.
vehicle is moving. pages relating to the association of certain
functions are displayed on connection.
Connect a USB cable. The

smartphone charges when Procedure (short) from the
When the telephone menu is displayed, on
connected by the USB cable. telephone
connecting the USB cable the display changes
automatically to CarPlay mode. In the Bluetooth® menu of your device, select
When another menu is displayed, on the system name in the list of devices detected.
connecting the USB cable a message is
On connecting the USB cable, the displayed in the upper bar indicating activation
"Telephone" function changes to of CarPlay mode. Enter a code of at least 4 figures in the device
"CarPlay" in the menu carousel. Press Open to display the CarPlay mode. and confirm.
Press "CarPlay" to display the
Enter this same code in the system,
CarPlay ® interface.
select "OK" and confirm.
Procedure from the system The system offers to connect the telephone:
Depending on the type of telephone, the
- "Telephone" (hands-free kit, telephone
Activate the Bluetooth® function on the system will ask you to accept or decline
only),
telephone and ensure that it is "visible to all" the transfer of your contacts.
- "Audio streaming" (streaming: wireless
(telephone configuration). playing of the audio files on the telephone),
If not, select "Update".
Press Telephone to display the - "Internet" (internet browsing, only if your
primary page. telephone is compatible with the Bluetooth®
DUN (Dial-Up Networking) standard).
Press the secondary page. Select one or more profiles and confirm. On returning to the vehicle, if the last telephone
connected is present again, it is automatically
®
Select "Bluetooth connection". recognised and within about 30 seconds
of switching on the ignition, the pairing is
established without any action on your part
The services available depend on
Select "Search for devices". (Bluetooth ® activated).
the network, the SIM card and the
The list of telephones detected is displayed. To change the automatic connection profile,
compatibility of the Bluetooth ® devices
select the telephone in the list then select the
used. Check the instructions for your
desired profile.
telephone and with your service provider
If the pairing procedure fails, it is for the services to which you have access.
recommended that you deactivate and
then reactivate the Bluetooth® function in
Connecting a Bluetooth®
your telephone. The ability of the system to connect to just peripheral device
one profile depends on the telephone. All
three profiles may connect by default.
Automatic reconnection
Select the name of the chosen telephone in the
list and "Confirm". On switching on the ignition, the telephone
connected when the ignition was last switched
Enter a code of at least 4 figures for off is automatically reconnected, if this
the connection then "Confirm". Visit www.citroen.co.uk for more information
connection mode was activated during the
(compatibility, more help, etc.).
pairing procedure.
Enter this same code in the telephone then The recognised telephone appears in the list. The connection is confirmed by the display of a
.
accept the connection. message and the name of the telephone.
Depending on your telephone, you may be
asked to accept automatic connection every
time the ignition is switched on.
Manual connection Select the device in the list. Making a call

Press Telephone to display the Select "Search for devices"
primary page Or Using the telephone is not recommended
while driving.
"Connect/Disconnect" to start or end the Park the vehicle.
Press the secondary page. Bluetooth® connection with the selected device. Make the call using the steering mounted
Select "Bluetooth ® " to display the controls.
Or
list of paired devices.
"Delete" to delete the pairing. Calling a new number
Select the device to connect Press Telephone to display the
Press "Search for devices".

Receiving a call primary page.
The connection is confirmed by the display of a An incoming call is announced by a ring and a
Enter the phone number using the
message and the name of the telephone. superimposed display in the screen.
digital keypad.
Make a short press on the steering Press "Call" to start the call.
Managing paired mounted TEL button to accept an
telephones incoming call.
Calling a contact
Make a long press
This function allows the connection or
Press Telephone to display the
disconnection of a peripheral device as
primary page.
well as the deletion of a pairing.
on the steering mounted TEL button
to reject the call. Or make a long press
primary page.
Or
on the steering mounted TEL button.
Press the secondary page. Select "End call".
Select "Bluetooth ® " to display the

list of paired devices. Select "Contacts".
Select the desired contact from the list offered.
Select "Call". Or
"Edit" to edit the selected contact.
Calling a recently used number Or
"Delete" to delete the selected contact.

primary page.
Or
"Delete all" to delete all information for the

Select "Call log". selected contact.
Select the desired contact from the list offered. Select "By name" to view the list of contacts.
It is always possible to make a call directly

from the telephone; as a safety measure,
first park the vehicle. Frequently asked questions
The following information groups together the
answers to the most frequently asked questions
concerning your audio system.
Managing contacts/entries

primary page.
Select "Contacts".
.
Select "View".
Select "Create" to add a new contact.
Navigation
QUESTION RESPONSE SOLUTION
The route calculation is not successful. The guidance criteria may be in conflict with the Check the route settings in the "Navigation"
current location (exclusion of toll roads on a toll menu.
road).
The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.
The "Risk areas" audible warning does not The audible warning is not active. Activate audible warnings in the "Navigation"
work. menu.
The system does not suggest a detour around The guidance criteria do not take account of Select the "Information-Service" function in the
an incident on the route. TMC messages. list of guidance criteria.
I receive a "Risk areas" alert which is not on my If guidance is not active, the system announces Zoom in on the map to see the exact position
route. all Risk areas positioned in a cone located in of the "Risk areas". Select "On the route" to no
front of the vehicle. It may provide an alert for longer receive alerts except during guidance or
"Risk areas" located on nearby or parallel roads. to reduce the time for the announcement.
Certain traffic jams along the route are not On starting, it is several minutes before the Wait until the traffic information is being
indicated in real time. system begins to receive the traffic information. received correctly (display of the traffic
information icons on the map).
The filters are too restrictive. Change the settings.
In certain countries, only major routes This is perfectly normal. The system is
(motorways, etc.) are listed for the traffic dependent on the traffic information available.
information.
The altitude is not displayed. On starting, the initialisation of the GPS may Wait until the system has started up completely
take up to 3 minutes to receive more than 4 so that there is GPS coverage by at least
satellites correctly. 4 satellites.
Depending on the geographical environment This is perfectly normal. The system is
(tunnel, etc.) or the weather, the conditions of dependent on the GPS signal reception
reception of the GPS signal may vary. conditions.
Radio
The reception quality of the tuned radio station The vehicle is too far from the transmitter of Activate the "RDS" function by means of the
gradually deteriorates or the stored stations are the station or no transmitter is present in the short-cut menu to enable the system to check
not working (no sound, 87.5 MHz is displayed, geographical area. whether there is a more powerful transmitter in
etc.). the geographical area.
The environment (hills, buildings, tunnels, This phenomenon is normal and does not
basement car parks, etc.) is blocking reception, indicate a failure of the audio equipment.
including in RDS mode.
The antenna is missing or has been damaged Have the aerial checked by a CITROËN dealer.
(for example, when going through an automatic
car wash or in an underground car park).
I cannot find some radio stations in the list of The station is not received or has changed its Press the system function: "Update list" to
received stations. name in the list. update the list of stations received.
The name of the radio station changes. Some radio stations send other information
in place of their name (the title of the song for
example).
The system interprets these details as the
station name.
.
19
Media
Playback of my USB memory stick starts only Some files supplied with the memory stick Delete the files supplied with the memory stick
after a very long wait (around 2 to 3 minutes). may greatly slow down access to reading and limit the number of sub-folders in the file
the memory stick (multiplication by 10 of the structure on the memory stick.
catalogue time).
When I connect my iPhone as a telephone and When the iPhone connects automatically as a Disconnect and reconnect to the USB port (the
to the USB port at the same time, I am unable to telephone, it forces the streaming function. The USB function takes priority over streaming).
play the music files. streaming function takes the place of the USB
function which is then not usable, there is a
period without sound of the track being played
with Apple ® players.
Some characters of the information for the The audio system does not display some types Use standard characters to name tracks and
currently playing medium are not displayed of character. folders.
correctly.
The streaming of files does not start. The connected device does not support Start playback from the device.
automatic playback.
The names of tracks and the track length are not The Bluetooth® profile does not allow the
displayed on the screen during audio streaming. transfer of this information.
Settings
When changing the setting of treble and bass The selection of an ambience imposes the Change the treble and bass or ambience
the ambience setting is deselected. treble and bass settings. settings to obtain the desired musical ambience.
When changing the ambience, the treble and Changing one without the other is not possible.
bass settings are reset to zero.
When changing the balance setting, distribution Choosing a distribution imposes a balance Change the balance setting or the distribution
is deselected. setting. setting to obtain the desired musical ambience.
When changing the distribution, the balance Changing one without the other is not possible.
setting is deselected.
When the "All passengers" mode is selected, The choice of an "All passengers" distribution Change the distribution using the cursor on the
the distribution is not as expected. can be programmed. touch screen.
There is a difference in sound quality between To allow for optimal listening quality, the audio Check that the audio settings (Volume, Bass,
the different audio sources. settings (Volume, Bass, Treble, Ambience, Treble, Ambience, Loudness) are adapted to
Loudness) can be tailored to different the sources listened to. It is advisable to set
sound sources, which can generate audible the audio functions (Bass, Treble, Balance) to
differences when changing source. the middle position, select the "None" musical
ambience and set the loudness correction to the
"Inactive" position in radio mode.
When the engine is off, the system stops after When the engine is switched off, the system's Turn the ignition on to increase the charge of
several minutes of use. operating time depends on the state of charge the battery.
of the battery.
The switch-off is normal, the system
automatically goes into energy economy mode
.
to maintain an adequate charge in the battery.
Telephone
I’m not able to connect my Bluetooth® Your telephone's Bluetooth® may be disabled or - Check that your telephone's Bluetooth®
telephone. the device may not be visible. telephone is enabled.
- Check in the telephone settings that it is
"visible to all".
The Bluetooth® telephone is not compatible with You can check the compatibility of your
the system telephone at www.citroen.co.uk (services).
No sound can be heard from the connected The sound depends on both the system and the Increase the volume of the audio system, to
Bluetooth® telephone. telephone. maximum if required, and increase the volume
of the telephone if necessary.
Ambient noise affects the quality of the Reduce the ambient noise level (close the windows,
telephone call. reduce the ventilation fan speed, slow down, etc.).
Some contacts are duplicated in the list. The options for synchronizing contacts are Select "Display SIM card contacts" or "Display
synchronizing the contacts on the SIM card, the telephone contacts".
contacts on the telephone, or both. When both
synchronizations are selected, some contacts
may be duplicated.
The contacts are not listed in alphabetical order. Some telephones offer display options. Change the telephone directory display settings.
Depending on the settings chosen, contacts can
be transferred in a specific order.
The system does not receive SMS. The Bluetooth® mode does not permit sending
SMS text messages to the system.
Audio system
Audio system First steps

On/Off, volume adjustment.
Select the source:

Radio; USB; AUX; CD; Streaming.
Adjust audio options:

Front/rear balance; left/right; bass/
treble; loudness; audio ambience.
Display of the list of local stations.

Long press: CD tracks or MP3
folders (CD/USB).
Audio system/Bluetooth® The system is coded in such a way that it
will only operate in your vehicle.
Contents
Select the screen display mode,
First steps 1 between:
Steering mounted controls 2 Date; Audio functions; Trip
Menus 2 As a safety measure, the driver must
only carry out operations which require computer; Telephone.
Radio 3
Media 4 sustained attention when the vehicle is
Telephone 6 stationary. The DARK button changes
Frequently asked questions 8 To avoid discharging the battery, the audio the screen display for greater
system may switch off after a few minutes convenience when driving at night.
if the engine is not running. 1st press: upper bar lighting only.
2nd press: black screen display.
3rd press: return to the standard
display.
.
1
Audio system
Cancel the current operation. Eject CD. Radio: automatic search for a lower
frequency.
CD/MP3/USB: selection of the
Select AM/FM wavebands. previous track.
Display main menu.
CD/USB: press and hold: fast back.
Skip in the list.
Buttons 1 to 6
Select a preset radio station.
Long press: memorise a radio Steering mounted controls Increase volume.
station.
Radio: select the previous/next
preset radio station.
USB: select the genre/artist/
Automatic frequency search down/ Decrease volume.
folder from the list depending on
up. classification.
Select previous/next CD, MP3 or Select the previous/next item in a
USB track. menu.
Mute on: cut the sound by
simultaneously pressing the volume
Select next frequency down/up. Radio: automatic search for a higher up and down buttons.
Select previous/next MP3 folder. frequency. Mute off: press one of the two
Select previous/next folder/genre/ CD/MP3/USB: select the next track. volume buttons.
artist/playlist (USB). CD/USB: press and hold: fast
forward.
Skip in the list.
Menus
Confirm.
Screen C
Change the audio source.
TA (Traffic Announcement) function Confirm a selection.
On/Off. Hang up/pick up the telephone.
Long press: access to PTY mode* Press for more than 2 seconds:
(radio Programme TYpes). access the telephone menu.
* Available depending on version.
Audio system
Audio functions Press the BAND AST button to Press the MENU button.
Radio; CD; USB; AUX. select a waveband.
Select "Audio functions".

Trip computer
Distance input; alerts; function Briefly press one of the buttons to
carry out an automatic search of the Press OK.
status.
radio stations.
Personalisation-configuration Select the "FM waveband
Vehicle parameters; display; preferences" function.
languages. Press one of the buttons to carry out
a manual search up/down for radio Press OK.
frequencies.
Bluetooth ®: Telephone – Audio
Pairing; Hands-free kit; Streaming. Select "Activate RDS".
Press the LIST REFRESH button to
display the list of stations received
locally (30 stations maximum). Press OK, RDS is displayed in the
Screen A To update this list, press for more screen.
than two seconds.
In "Radio" mode, press the OK button to
activate or deactivate RDS directly.
RDS
RDS, if activated, allows you to continue
The external environment (hills, buildings, listening to the same station by automatically
Radio tunnels, basement car parks, etc.) may retuning to alternative frequencies. However,
block reception, including in RDS mode. in certain conditions, coverage of an RDS
Selecting a station This is a normal effect of the way in station may not be assured throughout the
which radio waves are transmitted and entire country as radio stations do not cover
Press the SOURCE button
does not indicate any failure of the audio 100% of the territory. This explains the loss
repeatedly and select the radio.
.
equipment. of reception of the station during a journey.
Audio system
Playing TA messages Insert the USB memory stick into the USB port Press OK to select the desired
or connect the USB device to the USB port classification, then press OK again
using a suitable cable (not supplied). to confirm.
The TA (Traffic Announcement) function
gives priority to TA alert messages.
To operate, this function needs good To protect the system, do not use a USB Press LIST REFRESH briefly to
reception of a radio station that carries hub. display the previously selected
this type of message. When a traffic classification.
report is transmitted, the current audio
source (Radio, CD, etc.) is interrupted The system builds playlists (in temporary Navigate in the list using the left/
automatically to play the TA message. memory), an operation which can take right and up/down buttons.
Normal play of the medium previously from a few seconds to several minutes at
playing is resumed at the end of the the first connection.
message. Reduce the number of non-music files Confirm the selection by pressing
and the number of folders to reduce the OK.
waiting time. The playlists are updated
Press the TA button to activate or every time the ignition is switched off or a Press one of these buttons to go to
deactivate traffic messages. USB memory stick is connected. the previous/next track in the list.
The lists are memorised: if they are not Press and hold one of these buttons
modified, the subsequent loading time will for fast forward or fast back.
be shorter.
Media
Press one of these buttons to gain
USB port access to the previous/next "Fold
Make a long press on the LIST
er"/"Artist"/"Genre"/"Playlist" in
REFRESH button to display the
the list.
different classifications.
Select by "Folder"/"Artist"/"Genre"
/"Playlist".
Audio system
Auxiliary Socket (AUX) Some anti-pirating systems on original discs

On a single disc, the CD player can
or CDs copied using a personal recorder may
read up to 255 MP3 files spread
cause faults which are not related to the quality
over 8 directory levels. However, it is
of the original player.
recommended that this be kept to 2 levels
Insert a CD in the player; playback begins
so as to limit the time taken to access and
automatically.
play the CD.
The folder structure is not observed during
To play a disc which has already playback.
been inserted, press the SOURCE All of the files are displayed on a single
button several times in succession level.
Connect a portable device (MP3 player, etc.) to
the auxiliary Jack socket using an audio cable and select "CD".
(not supplied).
Press one of the buttons to select a To play a disc which has already
Press the SOURCE button several track on the CD. been inserted, press the SOURCE
times in succession and select button several times in succession
"AUX". Press the LIST REFRESH button to and select "CD".
display the list of tracks on the CD.
Press one of the buttons to select a
First adjust the volume on your portable device folder on the CD.
(to a high level). Then adjust the volume of your
audio system. Management of the controls is Press and hold one of these buttons
via the portable device. for fast forward or fast back.
Press one of the buttons to select a
track on the CD.
Do not connect a device to both the Jack
auxiliary socket and the USB port at the Playing an MP3 CD Press the LIST REFRESH button to
same time. compilation display the list of directories of the
MP3 compilation.
Insert an MP3 compilation in the CD player.
The audio equipment searches for all of the
CD player
.
music tracks, which may take anything between Press and hold one of these buttons
a few seconds and several tens of seconds, for fast forward or fast back.
Insert circular compact discs only.
before play begins.
Audio system
Information and advice It is recommended that you use genuine Connecting Apple® players
Apple ® USB cables for correct operation.
The audio system will only play files with Connect the Apple ® player to the USB port
the ".mp3" extension with a sampling rate using a suitable cable (not supplied).
of 22.05 kHz or 44.1 kHz. No other file type Play starts automatically.
(".wma", ".mp4", ".m3u", etc.) can be played.
Control is via the audio system controls.
Bluetooth® audio streaming
It is recommended that file names be of no
more than 20 characters and without special Streaming allows you to listen to audio files on The classifications available are those of the
characters (e.g.: " ? ; ù) so as to avoid any your smartphone using the vehicle's speakers. portable device connected (artists/albums/
problem reading or displaying the files.. genres/playlists/audiobooks/podcasts).
In order to be able to play a recorded CDR or Connect the telephone: see the "Telephone"
section. The version of the software in the audio system
CDRW, when recording it is preferable to select
may not be compatible with the generation of
the ISO 9660 level 1.2 or Joliet standards. Select in the menu "Bluetooth ®: Telephone – your Apple ® player.
If the disc is recorded in another format, it may Audio" the telephone to connect.
not be played correctly. The audio system connects to a newly paired
It is recommended that the same recording telephone automatically. Telephone
standard is always used for an individual disc,
with as low a speed as possible (4x maximum) Pairing a Bluetooth®
for optimum sound quality. Activate the streaming source by telephone
In the particular case of a multi-session CD, the pressing SOURCE.
Joliet standard is recommended. In certain cases, playing of the Screen C (availability depends on
audio files must be initiated from the model and version)
keypad.
Use only USB memory sticks in FAT32 format For reasons of safety and because
The control of common tracks is possible
(File Allocation Table). it requires sustained attention by the
via the audio system control buttons and the
driver, the pairing of a Bluetooth® mobile
steering mounted controls, if the telephone
telephone with the Bluetooth ® hands-free
To protect the system, do not use a USB supports the function.
system of your audio system must be done
hub. The contextual information can be displayed in
with the vehicle stationary and the ignition
the screen.
on.
Audio system
Visit www.citroen.co.uk for more information The "Telephone" menu permits access to the Receiving a call
(compatibility, more help, etc.). following functions in particular: "Directory", if
your telephone is fully compatible, "Calls list", An incoming call is announced by a ring and a
®
"Consult the paired equipment". superimposed display in the screen.
Activate the Bluetooth function on the
telephone and ensure that it is "visible to all"
(telephone configuration). Select the telephone to be connected from the
Select the "YES" tab in the screen
list. Only one telephone can be connected at
using the buttons.
Press the MENU button. a time.
Confirm with OK.

In the menu, select:
- "Bluetooth ®: Telephone –
Audio" Press this button at the steering
- "Bluetooth ® configuration" A virtual keypad is displayed in the screen: mounted controls to accept the call.
- "Perform a Bluetooth ® search" enter a code with at least 4 digits.
Confirm with OK.
A window is displayed with a search in progress Making a call

A message on the screen indicates the
message.
telephone chosen. To accept the pairing, enter
From the menu "Bluetooth ®: Telephone –
the same code on the telephone, then confirm
Audio".
The services available depend on with OK.
the network, the SIM card and the In case of failure, the number of attempts is not Select "Manage the telephone call".
compatibility of the Bluetooth ® devices restricted.
used. Select "Call".
A message that the pairing has been
Check the instructions for your telephone
successful appears in the screen. Or
and with your service provider for the
services to which you have access. Authorised automatic connection is only active
after the telephone has been configured. Select "Calls list".
The first 4 telephones recognised are displayed The directory and the call list can be accessed
after the necessary synchronisation period. Or
in this window.
.
Select "Directory".
Audio system
Press this button for more than two

seconds for access to your directory,
Frequently asked questions
then navigate using the thumbwheel. The following information puts together the answers to the most frequently asked questions
concerning your audio system.
Or QUESTION RESPONSE SOLUTION
To dial a number, use your telephone's keypad, With the engine off, the audio When the engine is switched Start the vehicle’s engine to
with the vehicle stationary. system switches off after a few off, the audio system operating increase the battery charge.
minutes of use. time depends on the state of
charge of the battery.
Ending a call The switch-off is normal: the
audio system switches to
During a call, press this button for economy mode and switches
more than two seconds. off to prevent discharging the
vehicle's battery.
Confirm with OK to end the call.
The message "the audio In order to protect the Switch the audio system off
The system accesses the telephone's system is overheated" appears installation if the surrounding for a few minutes to allow the
contacts directory, depending on its on the display. temperature is too high, the system to cool.
compatibility, and while it is connected by audio system switches to an
Bluetooth. automatic thermal protection
mode leading to a reduction
With certain telephones connected by
in volume or the CD play
Bluetooth you can send a contact to the
stopping.
directory of the audio system.
Contacts imported in this way are saved
in a permanent directory visible to all,
whatever the telephone connected.
The menu for the directory is not
accessible if it is empty.
Audio system
Radio
There is a difference in sound quality between To allow for optimal listening quality, the audio Check that the audio settings (volume, bass,
the different audio sources (radio, CD, etc.). settings (Volume, Bass, Treble, Ambience, treble, ambience, loudness) are adapted to
Loudness) can be tailored to different the sources listened to. It is advisable to set
sound sources, which can generate audible the audio functions (Bass, Treble, Front-Rear
differences when changing source (radio, CD, Balance, Left-Right Balance) to the middle
etc.). position, select the musical ambience "None"
and set the loudness correction to the "Active"
position in CD mode or to the "Inactive" position
in radio mode.
The preset stations do not function (no sound, An incorrect waveband is selected. Press the BAND AST button to return to the
87.5 MHz is displayed, etc.). waveband (AM, FM1, FM2, FMAST) on which
the stations are stored.
The traffic announcement (TA) is displayed. I do The radio station is not part of the regional Tune to a radio station which broadcasts traffic
not receive any traffic information. traffic information network. information.
The reception quality of the tuned radio station The vehicle is too far from the transmitter of Activate the RDS function to allow the system to
gradually deteriorates or the preset stations are the station or no transmitter is present in the see if a more powerful transmitter is within the
not working (no sound, 87.5 MHz is displayed, geographical area. geographic area.
etc.).
The environment (hills, buildings, tunnels, This phenomenon is normal and does not
basement car parks, etc.) is blocking reception, indicate a failure of the audio equipment.
including in RDS mode.
The aerial is missing or has been damaged (for Have the aerial checked by a CITROËN dealer.
example when going through an automatic car
wash or in an underground car park).
.
Sound cut-outs of 1 to 2 seconds in radio mode. During this brief sound cut-out, the RDS Switch off the RDS function if the phenomenon
searches for another frequency giving better is too frequent and always on the same route.
reception of the station.
Audio system
Media
The message "USB device error" is displayed in The battery of the device may not be sufficiently Charge the battery of the peripheral device.
the screen. charged.
The Bluetooth® connection is cut off.
The USB memory stick is not recognised. Reformat the USB memory stick.
The USB memory stick may be corrupt.
The CD is ejected every time or is not played. The CD is upside down, cannot be read, does - Check that the CD is inserted in the player
not contain audio files or contains audio files the right way up.
of a format that cannot be played by the audio - Check the condition of the CD: the CD
system. cannot be played if it is too badly damaged.
The CD is protected by an anti-pirating system - Check the content in the case of a recorded
not recognised by the audio system. CD: consult the advice in the "Audio"
section.
- The audio system’s CD player does not read
DVDs.
- Because of low quality, certain burned CDs
will not be read by the audio system.
The CD sound is of poor quality. The CD used is scratched or of poor quality. Insert good quality CDs and store them in
suitable conditions.
The audio settings (bass, treble, ambience) are Return bass and treble settings to 0, without
unsuitable. selecting an ambience.
Telephone
I am unable to access my voicemail. Few telephones or service providers allow the
use of this function.
Alphabetical index
A C
Accessories......................................76, 134-135 Cab, crew................................................... 50-52 Doors, side-hinged.................................... 30-32
Active City Brake.....................................120-121 Cable, audio.......................................................9 Driving abroad.................................................73
AdBlue ®.............................................13, 140-141 Cable, Jack........................................................9 DSC..................................................................12
Adjusting seat..................................................38 Cartridge, fragrance........................................58 Dynamic stability control (DSC).................12, 80
Adjusting the date............................................24 CD......................................................................5
Adjusting the time...................................... 23-24 CD, MP3......................................................... 5-6
Advanced Grip Control....................................80
Advice on driving................................... 103-104
Central locking........................................... 33-34
Changing a bulb......................................149-150 E
Airbags.......................................................85, 90 Changing a wiper blade..........................130-131 Electric windows..............................................35
Airbags, curtain.......................................... 87-88 Changing the remote control battery...............26 Emergency call...........................................77-78
Airbags, front...................................... 86, 88, 91 Checking the levels........................................136 Emissions control system, SCR..............14, 140
Airbags, lateral...........................................86, 88 Checks....................................................136-140 Engine............................................................136
Air conditioning, automatic..............................69 Checks, routine.......................................138-140 Engine, Diesel................................................128
Air conditioning, manual..................................69 Child lock..................................................36, 102 Engine, petrol.................................................128
Anti-pinch.........................................................36 Child seats ...................... 84, 89-90, 94-95, 101 Engines..........................................................161
Apple CarPlay connection...............................13 Child seats, conventional.................................94
Armrest....................................................... 38-39 Connection, Bluetooth................................14-16
ASR..................................................................12
Assistance call............................................77-78
Connection, MirrorLink....................................12
Control, electric windows.................................36 F
Audio streaming (Bluetooth)........................10, 6 Control, emergency door.................................29 Filling the fuel tank.................................126, 128
Control, heated seats.......................................39 Filter, air.........................................................138
Control stalk, lighting........................... 15, 71, 73 Filter, oil...................................................138-139
B Control stalk, wipers...................................73-74
Courtesy lamp, front........................................55
Filter, passenger compartment......................138
Fittings, front....................................................55
Battery....................................................138, 158 Cover, load space................................ 60, 62-63 Fittings, interior.......................................... 54-56
Battery, remote control....................................27 Cruise control.......................................... 117-120 Fittings, rear.....................................................60
Blanking screen (snow shield).......................130 Flap, fuel filler.................................................126
BlueHDi............................................21, 140, 160 Flashers...........................................................15
Bluetooth (hands-free)........................ 14-16, 6-8
Bluetooth (telephone)..................................14-16 D Fluid, brake....................................................136
Fluid, engine coolant......................................136
Bonnet............................................................135 DAB (Digital Audio Fluid, power steering.....................................136
Boot lid....................................................... 29-30 Broadcasting) - Digital radio........................ 8-9 Foglamps, front................................................73
Brake discs.............................................138, 140 Date (setting)....................................................24 Frequency (radio)............................................7-8
Brakes....................................................138, 140 Daytime running lamps, LED...........................72 Fuel................................................................128
Bulbs (changing).....................................149-150 Deactivating the passenger airbag...... 86, 90-91
Dimensions..................................... 169, 171-173
Direction indicators..........................................15
.
Display screen, instrument panel..................108
Doors, rear................................................. 30-32
Doors, side................................................. 28-29
Alphabetical index
G L
Gearbox, automatic............................... 108-109 Levels.............................................................136 Pre-tensioning seat belts.................................84
Gearbox, electronic................................108-110 Levels and checks..................................136-139 Priming the fuel system.................................160
Gearbox, electronic ~ Lighting............................................................. 71 Protecting children....................... 89-90, 99, 101
Gearbox, electronic...................... 106-107, 110 Lighting, directional..........................................73
Gearbox, manual............ 105-106, 108-110, 140 Locking.............................................................27
Gearbox, manual (reverse gear)........... 105-106
Gear lever, manual gearbox..........................105
Low fuel level.................................................126
R
Gear shift indicator ~ Gear Radio.................................................... 7-8, 10, 3
efficiency indicator................................16, 108
Glove box.........................................................55 M Radio, digital (Digital Audio
Broadcasting - DAB).................................... 8-9
Grip control................................................ 80-81 Menu, main........................................................2 Range, AdBlue...........................................13, 21
Mirror, rear view...............................................38 RDS....................................................................8
Mirrors, door....................................................37 Reinitialisation of the under-
H Mountings, ISOFIX..........................................98
MP3 CD..............................................................5
inflation detection system............................ 114
Reinitialising the electric windows...................36
Headlamps, dipped beam................................ 71 Remote control........................................... 25-27
Headlamps, main beam.............................16, 71 Replacing bulbs......................................149-150
Head restraints.......................................... 38-39
Hill start assist................................................ 111 N Replacing the oil filter....................................139
Reversing camera..........................................124
Net.............................................................. 62-63 Risk areas (update)............................................5
Roof bars.................................................133-134
I O
Running out of fuel (Diesel)...........................160
Identification.................................................. 174
Immobiliser, electronic.....................................27
Indicator lamps, operation.................................8
Oil, engine......................................................136
Opening the bonnet.......................................135 S
Instrument panel................................................7 Overhead storage............................................55 Safety, children............................ 89-90, 99, 101
Instruments and controls...................................4 Scented air freshener................................ 57-59
Screen, monochrome........................................2
J P Screenwash fluid...........................................136
SCR (Selective Catalytic Reduction).............140
Pads, brake............................................138, 140 Seat belts.............................................83-84, 94
Jack....................................................................9 Parcel shelf, rear..............................................60 Seat, rear bench........................................ 42-43
Parking brake...........................10, 105, 138, 140 Seats, front................................................. 38-41
Plates, identification...................................... 174 Seats, front bench...................................... 40-41
K Player, Apple ®.............................................. 11, 6
Player, MP3 CD.............................................. 5-6
Seats, heated...................................................39
Seats, rear.................................................. 43-50
Key...................................................................27 Player, USB....................................................9, 4 Settings, system...............................................12
Kit, hands-free.................................... 14-16, 6-8 Port, USB.......................................................9, 4 Shield, snow...................................................130
Kit, temporary puncture repair.......................143 Pressures, tyres............................................. 174 Sidelamps........................................................ 71
Alphabetical index
U
Snow chains...................................................129 Under-inflation (detection)...................... 112-113
Socket, 12 V.....................................................64 Updating risk areas............................................5
Socket, auxiliary.............................................9, 5 Updating the date.............................................24
Socket, Jack...................................................9, 5 Updating the time....................................... 23-24
Sockets, auxiliary.............................................55 UREA...............................................................21
Speed limiter........................................... 115-117 USB.......................................................9-10, 4, 6
Stability control (ESC).....................................80
Starting a Diesel engine................................128
Station, radio.............................................. 7-8, 3
Steering mounted controls, audio.....................2 V
Steering wheel adjustment..............................37 Ventilation........................................................69
Steering wheel, adjustment.............................37 Voice recognition........................................13-14
Stop & Start.................15, 69, 108-110, 138, 158
Storage.............................................................55
Storage compartments....................................54
System, ASR....................................................81 W
Warning and indicator lamps.............................8
Warning lamps...................................................8
T Warning lamp, SCR emissions
control system...............................................14
Table, writing....................................................55 Warnings and indicators................... 9, 11-12, 16
Tank, fuel........................................................126 Weights..........................................................161
Telephone........................................... 14-16, 6-8 Window controls........................................ 35-36
Time (setting)............................................. 23-24 Wiper blades (changing)................................130
TMC (Traffic info)...............................................6
Touch screen.....................................................1
Towball, quickly detachable........................... 131
Towbar......................................103-104, 131-133
Towbar with quickly detachable towball........ 131
Towed loads...................................................161
Traction control (ASR)......................... 12, 80-81
Traffic information (TA)..................................6, 4
Traffic information (TMC)...................................6
Trailer..............................................103-104, 131
Trip computer............................................. 22-23
Tyre under-inflation detection............12, 112-114
.
177
CONDUENT
4Dconcept
Automobiles CITROËN declares, by application XEROX
of the provisions of the European legislation
(Directive 2000/53) relating to End of Life
Vehicles, that it achieves the objectives set by
this legislation and that recycled materials are
used in the manufacture of the products that it
sells.
Reproduction or translation of all or part of

this document is prohibited without written
authorisation from Automobiles CITROËN.
Printed in the EU
Anglais
09/2017
*17BGO.0040*
ANG. 17BGO.0040

Citroen Berlingo Handbook

Uploaded by

Copyright:

Available Formats

Citroen Berlingo Handbook

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Citroen Berlingo Handbook

Uploaded by

Copyright:

Available Formats

HANDBOOK

This symbol indicates the latest information

This document presents the information and recommendations required

If ownership of your vehicle is transferred, please ensure this Complete Key

Overview . Ease of use and comfort Lighting and visibility

Eco-driving . Surveillance mirror

1. Lighting and direction indicator control

Optimise the use of your Drive smoothly

Limit the causes of excess Observe the recommendations

When filling the tank, do not continue after the

At the wheel of your new vehicle, it is only

Instrument panel Displays

The format of the information presented in the

Warning and indicator lamps Warning lamps Operation indicator lamps

Red warning lamps

Warning/indicator lamp State Cause Action/Observations

Orange warning lamps

Flashing. The supply is cut off following a Re-establish the supply.

Warning/indicator lamp State Cause Action/Observations

A malfunction of the particle filter

Have the filter checked by a CITROËN dealer or a

Warning/indicator lamp State Cause Action/Observations

The lamps only operate when the sidelamps or dipped

Green indicator lamps

Warning/indicator lamp State Indicates Action/Observations

Activation of the dipped beam

Blue warning/indicator lamps

Indicator lamp in the display

Speed limiter On. The limiter is selected. Manual selection.

The climatic conditions mean that

Wait until the indicator lamp goes off before starting

before the next service is due. For a few

F Press the trip distance recorder reset button

Engine oil level indicator

The level read will only be correct if the

For more information on Fuel, refer to the

What to do if the needle goes into the red F select CHECK.

In the event of the risk of non-

The 0 fluid level is reached.

These warning lamps come on, accompanied

During the permitted driving phase (between Trip computer

Each press of the button on the end of the

This displayed value can vary greatly

Touch screen tablet

F Press the MENU button.

F Press "Confirm" to quit.

F Select the "Configuration"

Key Unlocking the cab or

An initial press on this button unlocks

The direction indicators flash two times.

F Insert the key into the ignition switch with

Locking the vehicle

Front doors Sliding side door(s) From outside

A mechanical system prevents the

F Use the remote control to lock/unlock the

F Use the door opening control to unlock and

Operation in the event of Tailgate

Take care not to block the guide space

From inside Opening Side-hinged rear doors