100% found this document useful (1 vote)
1K views2 pages

Unit-3 - Execution of A Complete Instruction

The document discusses the execution of a complete instruction cycle in a computer system. It describes the major components involved, how the CPU fetches instructions from memory and uses registers, and provides examples of control sequences for fetch and execution cycles.

Uploaded by

Tripti Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
1K views2 pages

Unit-3 - Execution of A Complete Instruction

The document discusses the execution of a complete instruction cycle in a computer system. It describes the major components involved, how the CPU fetches instructions from memory and uses registers, and provides examples of control sequences for fetch and execution cycles.

Uploaded by

Tripti Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Execution of a Complete Instruction

• An instruction cycle consists of an instruction fetch, followed by


zero or more operand fetches, execution, followed by zero or more
operand stores, followed by an interrupt check (if interrupts are
enabled).

• The major computer system components (processor, main memory,


I/O modules) need to be interconnected in order to exchange data
and control signals.
• The most popular means on interconnection is the use of a shared
system bus consisting on multiple lines.
• The CPU exchanges data with memory. The CPU typically makes
use of two internal registers: a memory address register (MAR),
which specifies the address in memory for the next read or write,
and a memory data register (MDR), which contains the data to be
written into memory or receives the data read from memory.

Instruction Fetch and Execute


• The processor fetches an instruction from memory – program counter
(PC) register holds the address of the instruction to be fetched next
• The processor increments the PC after each instruction fetch so that it
will fetch the next instruction in the sequence – unless told otherwise
• The fetched instruction is loaded into the instruction register (IR) in the
processor – the instruction contains bits that specify the action the
processor will take
• The processor interprets the instruction and performs the required
action.

Assume the next instruction is stored at (Current instruction address +4)


Fig: Single-bus organization of the data-path inside a processor

Control Sequence of Fetch Cycle

Step Action
1 PCout, ARin, Read, Set Carry in of ALU, clear Y, Add, Zin
2 Zout, PCin, WMFC (wait for memory completion)
3 DRout, IRin

Control Sequence of Execution Cycle


Example: Add R1, X

Step Action

4 Address of IRout, ARin, Read


5 R1out, Yin, WMFC
6 DRout, Add, Zin
7 Zout, R1in
8 End

You might also like