Scribd
Upload
20 views2 pages

B3 Chapter2 (TC)

The document discusses three examples of common source and common emitter amplifiers operating at high frequencies. It provides the circuit diagrams and component values for each example amplifier and lists calculation steps to determine the small signal equivalent circuits, voltage transfer functions, and cutoff frequencies.

Uploaded by

Nguyen Duc Thanh Tung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views2 pages

B3 Chapter2 (TC)

The document discusses three examples of common source and common emitter amplifiers operating at high frequencies. It provides the circuit diagrams and component values for each example amplifier and lists calculation steps to determine the small signal equivalent circuits, voltage transfer functions, and cutoff frequencies.

Uploaded by

Nguyen Duc Thanh Tung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

3/1/2024

E-Leaning
2.1.2. Common Source (CS) amplifier
EX1: Consider the common-source
(CS) amplifier in the figure besides,
where RI = 1.00 K, R1 = 180.00 K,
R2 = 82.00 K, RS = 33.00 K, R3 =
68.00 K, RD = 22.00 K, VSS = 10 V.
MOSFET có Kp = 0.3 mA/V2, Vtp = 1 V,
T = 0.5x109 rad/s, Cgd = 5 pF.
a/ Determine the Q-point of this circuit.
b/ Draw the small-signal high-
frequency equivalent circuits for this
amplifier.
c/ Find the transfer function Av(s) =
vo/vI at high frequency and plot Bode

19/11/2015 402060 – Chapter 2. The high-Frequency Response in Transistor Amplifiers 38

E-Leaning
2.1.3. Common Emitter (CE) amplifier
EX2: Transistor operates at
high frequency, given  = 100, VCC

r = 1000Ω, C = 5pF, ωT = 109


rad/s. Rc
Cc
1k
a/ Draw the high-frequency Vout

Cb →∞ 10µF
small-signal equivalent circuit. Ri
Q RL

b/ Find the voltage transfer 1k 1k


Vi
function at high frequency R2 0
100k
c/ Plot Bode for low (fL) and Re
10µF
Ce
0
high (fH) cut-off frequency for 1k
0
circuit. VBB 0

19/11/2015 402060 – Chapter 2. The high-Frequency Response in Transistor Amplifiers 39

1
3/1/2024

E-Learning
2.1.3. Common Emitter (CE) amplifier
EX3: Consider the figure besides,
where RI = 1.00 K, RB = 68 K, RE
= 47.00 K, R3 = 33.00 K, VCC =
12 V, VEE = 12 V. BJT has  = 75, T
= 0.5x109 rad/s, C = 25 pF.
a/ Determine the Q-point of this
circuit.
b/ Draw the small-signal equivalent
circuit at high frequency.
c/ Determine the voltage transfer
function Gv(s) = vo/vI at high
frequency.

19/11/2015 402060 – Chapter 2. The high-Frequency Response in Transistor Amplifiers 40

You might also like