®

DSEGenset

DSE8710 ENVIRONMENTAL TESTING STANDARDS

REAR MOUNTED SYNCHRONISING AUTO START ELECTRO MAGNETIC COMPATIBILITY

LOAD SHARE CONTROL MODULE BS EN 61000-6-2

EMC Generic Immunity Standard for the
Used in conjunction with DSE remote displays Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the
Industrial Environment
FEATURES
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment
The DSE8710 is an easy to use System alarms are annunciated on KEY LOAD SHARE FEATURES:
Synchronising Auto Start Control the LCD screen (multiple language • Peak lopping/sharing (with TEMPERATURE
Module suitable for use in a options available), illuminated LED DSE8x60) BS EN 60068
Ab/Ae Cold Test -30 oC
multi-generator loadshare system, and audible sounder. • Sequential set start BS EN 60068-2-2
designed to synchronise up to 32 • Manual voltage/frequency Bb/Be Dry Heat +70 oC
generators including electronic and The event log will record 250 events adjustment
VIBRATION
non-electronic engines. to facilitate easy maintenance. An • R.O.C.O.F. and vector shift BS EN 60068-2-6
extensive number of fixed and protection Ten sweeps in each of three major axes
The DSE8710 monitors the flexible monitoring, metering and • Generator load demand 5 Hz to 8 Hz at +/-7.5 mm, 8 Hz to 500 Hz at
2 GN
generator and indicates operational protection features are included • Automatic hours run balancing
status and fault conditions, as well as comprehensive • Mains (Utility) de-coupling HUMIDITY
automatically starting or stopping communication and system • Mains (Utility) de-coupling BS EN 60068-2-30
Db Damp Heat Cyclic 20/55 oC at 95% RH
the engine on load demand or fault expansion options. test mode 48 Hours
condition. • Dead bus sensing BS EN 60068-2-78
Using the DSE PC Configuration • Bus failure detection Cab Damp Heat Static 40 oC at 93% RH
48 Hours
The modules are designed to work Suite Software allows easy • Direct governor and AVR control
with independent front display adjustment of the operational • Volts and frequency matching SHOCK
screens which are connected via a sequences, timers and alarms. With • kW and kV Ar load sharing BS EN 60068-2-27
Three shocks in each of three major axes
data link up to a maximum all communication ports capable of • Dead bus synchronising 15 GN in 11mS
distance of 1 km. These must be being active at the same time, the
ordered as a separate item. DSE8710 is ideal for a wide variety
DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES
of demanding load share BS EN 60529
IP65 - Front of module when installed into the
applications. control panel with the supplied sealing gasket.

COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY

OF LOAD SHARE APPLICATIONS
DSE2130 MODEM MODBUS PC
DSE2131 DSE8721
DSE2133 DSE871x
DSE2152 11 6 4
DSE2157
DSE2548 232 485

DSENET ® RS232 AND USB USB CONFIGURABLE DC OUTPUTS ANALOGUE EMERGENCY DC POWER DISPLAY
EXPANSION RS485 PORT HOST INPUTS SENDERS STOP SUPPLY 8-35V SCREENS

+
ETHERNET

DEUTZ
DSE8710 MSC
ISUZU
PERKINS
CATERPILLAR
MTU
7 55xx ­75xx ­8xxx VOLVO
OTHER
CUMMINS
SCANIA

BUS VOLT FREE GENERATOR SENSING FUEL & START CHARGE ELECTRONIC MAGNETIC
SENSING OUTPUTS OUTPUTS ALTERNATOR ENGINES PICK-UP
CURRENT VOLTS
D­+
+ W/L

1ph 2 1ph 1ph

2ph 2ph 2ph
3ph 3ph 3ph
N E N

ISSUE 3
 ®

DSEGenset

DSE8710 SPECIFICATION
REAR MOUNTED SYNCHRONISING AUTO START
LOAD SHARE CONTROL MODULE DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous
Used in conjunction with DSE remote displays
CRANKING DROPOUTS
FEATURES Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout
and supply recovers to 5 V. This is achieved
without the need for internal batteries

MAXIMUM OPERATING CURRENT

460 mA at 12 V, 245 mA at 24 V

MAXIMUM STANDBY CURRENT

375 mA at 12 V, 200 mA at 24 V

CHARGE FAIL/EXCITATION RANGE

DSE8721 0 V to 35 V
Colour Remote Display Module
OUTPUTS
OUTPUT A (FUEL)
15 A DC at supply voltage

OUTPUT B (START)
15 A DC at supply voltage

OUTPUTS C & D
8 A AC at 250 V AC (Volt free)

AUXILIARY OUTPUTS E,F,G,H,I & J

DSE8711 2 A DC at supply voltage
Standard Remote Display Module
GENERATOR & BUS
KEY FEATURES • Easy access diagnostic pages KEY BENEFITS VOLTAGE RANGE
• Can be set as a DSE8710 or including modem diagnostic pages • Compatible in load share systems 15 V to 333 V AC (L-N)
DSE8760 • Data logging and trending containing DSE55xx, DSE75xx and FREQUENCY RANGE
• Independent display screen • CAN, MPU and Frequency speed DSE8xxx series. Contact DSE for 3.5 Hz to 75 Hz
options sensing further details
MAGNETIC PICK-UP
• Comprehensive synchronising & • Tier 4 CAN engine support • Real-time clock provides accurate VOLTAGE RANGE
loadsharing capabilities • “Protections disabled” feature event logging +/- 0.5 V to 70 V
• Built-in governor and AVR control • Front panel editing with PIN • Ethernet communication, provides
FREQUENCY RANGE
• Base load (kW export) protection builit in advanced remote 10,000 Hz (max)
functionality • Fully configurable using DSE monitoring.
• Mains (utility) de-coupling Configuration Suite PC software • Can be integrated into building BUILT-IN GOVERNOR CONTROL
MINIMUM LOAD IMPEDANCE
protection via USB management systems (BMS) and 1000Ω
• Generator power (kW, kV Ar, kV A • LED and LCD alarm indication programmable logic control (PLC) Fully isolated
& pf) monitoring • Configurable display languages • Increased input and output GAIN VOLTAGE
• Overload (kW & kV Ar) protection • USB connectivity expansion capability via DSENet® 0 V to 10 V DC
• Reverse power (kW & kV Ar) • Customisable status screens • Licence-free PC software Fully isolated

protection • Five key menu navigation • IP65 rating (with supplied gasket) OFFSET VOLTAGE
• Unbalanced load protection • 3 Configurable maintenance offers increased resistance to water +/- 10 V DC
Fully isolated
• Independent earth fault protection alarms ingress
• Advanced integral PLC editor • Multiple date and time run • Advanced Internal PLC editor allows BUILT-IN AVR CONTROL
• 11 Configurable inputs scheduler user configurable functions to meet MINIMUM LOAD IMPEDANCE
1000Ω
• 8 Configurable outputs • Manual fuel pump control specific application requirements. Fully isolated
• Configurable flexible sensor inputs • Fuel usage monitor and low fuel
GAIN VOLTAGE
• DSENet® expansion compatibility level protection EXPANSION DEVICES
0 V to 10 V DC
• User configurable RS232, RS485 • Charge alternator failure • DSE124 CAN/MSC Extender Fully isolated
and Ethernet communications protection • DSE2130 Input Expansion Module
• DSE2131 Ratiometric Input Expansion OFFSET VOLTAGE
• Remote SCADA monitoring via • Load switching (load shedding +/- 10 V DC
Module
various DSE software applications and dummy load control) • DSE2133 RTD & Thermocouple Fully isolated
• MODBUS RTU & TCP support • Configurable event log (250) Expansion Module DIMENSIONS
• User configurable MODBUS • Backed up real time clock • DSE2152 Analogue Output Expansion OVERALL
pages Module 240 mm x 172 mm x 57 mm
9.4” x 6.8” x 2.2”
• Advanced SMS control and fault • DSE2157 Output Expansion Module
messaging (additional GSM • DSE2548 LED Expansion Module OPERATING TEMPERATURE RANGE
modem required) -30 oC to +70 oC
-22 oF to +158 oF

STORAGE TEMPERATURE RANGE

RELATED MATERIALS -40 oC to +85 oC
TITLE PART NO’S -40 oF to +185 oF
DSE8721 Colour Remote Display Module Data Sheet 055-073
DSE871x Mono Remote Display Module Data Sheet 055-084
DSE8700 Installation Instructions 053-073
DSE8710 Operator Manual 057-124
DSE8700 PC Configuration Suite Manual 057-127
DSE8760 Data Sheet 055-185

DEEP SEA ELECTRONICS PLC UK DEEP SEA ELECTRONICS INC USA

Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH 3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708
EMAIL [email protected] WEBSITE www.deepseaplc.com EMAIL [email protected] WEBSITE www.deepseausa.com
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-184/03/14 (2)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457