PART-I

SCHEDULE - A
NIT No. 366 /SE-II/TTD/2023-24
Name of Work: Construction of bath rooms on the north side of existing toilet block near GNC Kalyanakatta at Tirumala
UOM
Estimate
Sl. Item Detailed Rate (INR) ( upto 50 Amount (INR)
Quantity (only
No Specification Description ( Upto 2 Decimals ) Characte ( Upto 2 Decimals )
Figures)
rs)
1 72.00 Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m 305.68 Cum 22,008.96
including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete
for finished item of work including Ordinary soil-Manual means up to 3m depth.

2 18.00 Earthwork excavation in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in 1,118.76 Cum 20,137.68
tippers and disposal with intial lift of 3 m and lead up to 1000 mt, including trimming bottom and side slopes in
accordance with with requirements of lines grades and cross sections as per technical specifications clause
302.3.5 MORD/301 MORTH - Mechanical means.

0.00 Note: 1 0.00 N.A 0.00

1. The quality, quantity and availability of rock shall be checked before affording credit.
2. In case some rock is issued to the contractor, rate as arrived per cum to that issued extent shall be deducted.
3. In case some rock is issued to the contractor at site , the item carriage shall be restricted / reduced to that
extent.
4.Being small quantity, manual loading will be economical in this case and has been provided accordingly.

3 56.00 Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well 1,488.10 Cum 83,333.60
watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc.,
complete.
4 90.00 Filling with usefull available excavated earth (excluding rock) in trenches,sides of foundations and basement 45.27 Cum 4,074.30
with intial lead in layers not exceeding 15cms thick consolidating each deposited layer by watering and
ramming including cost and conveyance of water to work site and all operational,incidental,labour charges,hire
charges of T&P etc., complete for finished item of work.

0.00 Note: Cost of transportation of good quality earth has not been included. Only labour for carrying carted earth 0.00 N.A 0.00
with a lead of 50m to the foundation pits has been taken in the rate. The cost of carted earth / sand may be
worked out separately if the same is not available from the adjoining area.:

5 27.00 Cement Concrete (1:4:8) using 40 mm ( 0.54 Cum), 20mm (0.27 Cum) and 12 mm (0.09 Cum) hard broken 5,441.62 Cum 1,46,923.74
granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in
layers of not more than 15 cms thick well compacted including curing, cost and conveyance of all materials etc.,
complete.
6 0.00 Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm 0.00 N.A 0.00
HBG crushed metal 0.530 cum (707 kgs),. 10 mm HBG crushed metal, 0.362 cum (471 kgs) , sand 0.407 cum
(616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cum of CC)etc., to site and
including sales & other taxes on all materials including all operational, incidental and labour charges such as
machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers
approved by the department but including cost of centering, shuttering charges and excluding cost of steel and
its fabrication charges for finished item of work (APSS No. 402).

0.00 Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 0.00 N.A 0.00
of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before
execution. The cement considered for above M25 grade concrete is 380 kgs/Cum and the rate is arrived
accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of
cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at
estimate rate + T.P ( Either increae or decrease in quantity adopted in the estimate). Payment will not be made
for variation in the quantity of other materials such as coarse & Fine aggregates.

a 17.00 Footings 10,299.06 Cum 1,75,084.02

b 1.00 Columns up to basement (Pedestals) 10,939.84 Cum 10,939.84
c 3.90 Plinth beams 12,966.99 Cum 50,571.26
d 1.85 Columns in first floor. 13,855.81 Cum 25,633.25
7 1.81 Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of specified 87,067.47 MT 1,57,592.12
grade (as per IS 1786 - 1979) of different diametres for RCC works, including labour charges for straightening,
cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and
size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per
approved designs and drawings, including cost and conveyance of steel bars including all wastages such as
over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all
incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and
other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence
of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).
8 13.00 Cement Concrete (1:3:6) - Grade M15 using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken 5,975.25 Cum 77,678.25
granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in
layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of
all materials etc., complete.
Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required
for the given concrete mix.

9 50.00 Hire charges for access scaffolding for first floor up to 3.66m fot the VCC Vertical walls of Plane surface( Rate is 632.46 Sq.m 31,623.00
for both sides centering) including open drains etc.,complete .

10 0.00 Construction of Brick Masonry CM(1:6) using well burnt Bricks 2nd class or ground moulded ( Non- modular or 0.00 N.A 0.00
traditional size) ( 230 x 110 x 70mm) including curing, cost and conveyance of all materials as directed during
execution and complying with standard specifications etc., complete.

a 17.00 Basement 8,067.95 Cum 1,37,155.15

b 18.00 First floor 8,197.31 Cum 1,47,551.58
11 85.00 Construction of 110 mm thick Brick partition walls in CM(1:4) using well burnt bricks 2nd class or ground 991.00 Sqm 84,235.00
moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all
materials etc,. complete
12 100.00 Plastering in CM(1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance 461.00 Sqm 46,100.00
of all materials, screening, curing, rounding of corners, incidental charges as directed during execution
complying with standard specifications etc., complete.

13 185.00 Plastering in CM(1:5) 12 mm thick using best river sand including cost and conveyance of all materials, 302.01 Sqm 55,871.85
screening, curing, rounding of corners, incidental charges as directed during execution complying with standard
specifications etc., complete.(Inside)

14 75.00 Flooring with Antiskid floor tiles 1st quality of size 300 x 300 X7-8mm of series& shades (as per manufacture 1,113.85 Sqm 83,538.75
specification), set over base coat of cement mortar (1:6) 20mm thick over CC bed already laid or RCC roof slab,
including near cement slurry of honey like consistency spread @ 3.30 kgs per squm. jointed with neat cement to
full depth mixed with pigment of matching shade, including cost of all materials like flooring slab, cement, sand
and water etc., complete, including seigniorage charges, etc., complete for finished item of work and including
the cost of conveyance of all materials.

15 230.00 Finishing the sides of walls with 1st quality decorated digital glazed tiles of size not less than 300x600x8 mm 865.57 Sqm 1,99,081.10
thick (Group B III of IS 15622-2006) of approved colour and brands including pointing the joints with the
same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm
thick & Cement slurry of 33 Kg/10sq.m shall be used for fixing bed tiles including cost and conveyance of all
materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls).

16 40.00 Supply and fixing of 10mm wide PVC edge beading including cost and conveyance of all materials and incidental 52.36 Rmt 2,094.40
charges etc., complete.
17 0.00 Flooring with high polished granite slabs set over base coat of cement mortar (1:8) 20 mm thick over CC bed 0.00 N.A 0.00
already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm &
jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost &
conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished
item of work.

18.00 - do - high polished granite 16 to 18 mm thick slabs up to 8'-00 (2.43 M) Regular colours (other than black and 4,028.90 Sqm 72,520.20
Premium colours)
18 0.00 Flooring with high polished granite slabs set over base coat of cement mortar (1:8) 20 mm thick over CC bed 0.00 N.A 0.00
already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm &
jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost &
conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished
item of work.

16.00 - do - high polished granite 16 to 18 mm thick slabs up to 8'-00 (2.43 M) (Black colour) 3,569.98 Sqm 57,119.68
19 50.00 Flooring with polished cement Concrete floor tiles of 25mm thick confirming to IS:1380-12013/IS 1237-2012 of 1,025.35 Sqm 51,267.50
following sizes set over base coat of Cement mortar (1:6) 20mm thick over CC bed already laid or RCC roof slab,
including neat cement slurry of honey like consistency spread @3.3 Kgs per sqm & jointed with neat cement to
full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc. complete for
finished item of work- Chequrred cement concrete heavy duty tiles confirming to IS:13801 using aggregates,
cement, pigments of size 300 X 300 mm of any shades.

20 3000.00 Supplying and fixing in position M.S tubes & pipes of all diameters as per ISI 1161 of approved size design 177.22 Kgs 5,31,660.00
including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the
same with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three
coats) of approved make and colour including cost of making the holes into RCC or masonry works and making
good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc.,
complete.

21 150.00 Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm 522.64 Sqm 78,396.00
thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile length: 550 MPA. Paint coating: Regular Modified
Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020,
Length: Maximum 12 Meters with Regular Range Colours with minimum end of 15 cms etc.,complete as
directed during execution.
22 60.00 Supply of Roof Accessories , Medium size ridge,,Berge cap, Corner trim, L-Flashing, Down pipes, Gutter etc., 271.00 Rmt 16,260.00
with 0.47 mm thick width :0.585, Length ::Maximum 2 1/2 meters.

23 80.00 Providing and fixrng factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 1,000.72 Rmt 80,057.60
size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebate of 32 mm
do- Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the
horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse foMard speed
control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt
fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for
horizontal member.

24 26.00 Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3,689.15 Sqm 95,917.90
3MM top and bottom rigid layer with an overall density of 750k9/Cum. lt will be fixed to the frame using 3 inch
/4 inch hinges. Minimum of 4 hinges will be required for fixing the door with the frame.

25 0.00 Providing and applying wall putty of white cement or polymer or cement based or equivalent putty such as Birla 0.00 N.A 0.00
wall care putty of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth
after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying
emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin
pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and
conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for
finished item of work .

b 120.00 For patch works at old Toilet block 144.18 Sqm 17,301.60
26 50.00 Painting with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 199.19 Sqm 9,959.50
50 grams/liter of approved brand over coat of Cement primer (Interior Gr I) (Total three coats ) and shade after
thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and
conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for
finished item of work as per SS 911 for internal walls.Two coats for internal walls - New work

27 0.00 Painting with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic 0.00 N.A 0.00
Compound) content less than 50 grams/liter of approved brand over coat of Cement primer (Exterior Gr-II)
(Total three coats ) and shade after thoroughly brushing the surface to remove all dirt and remains of loose
powdered materials, including cost and conveyance of all materials to work site and all operational, incidental,
labour charges etc., complete for finished item of work as per SS 911 for external walls-

a 225.00 Two coats for External walls - new 273.88 Sqm 61,623.00
b 150.00 Two coats for External walls - old 182.58 Sqm 27,387.00
28 2.00 Supplying & Fixing white glazed flat back half stall urinals 1st quality confirming to IS:2556-1995 with standard 3,235.42 Each 6,470.84
C.P. Spreader of overall size 95 x 95 x 57 mm confirming to IS:2556 - Part 6, Sec-6-1974 fixed with screws
complete Indian make with ISI mark or equivalent approved by the department. -do- size 590 x 375 x 390 mm

29 10.00 Supply & Fixing of Angle stopcock 12.7mm (1/2") dia frist quality indian make heavy duty duty (400 grames) 510.55 Each 5,105.50

30 28.00 Supply & Fixing 12.7mm NP Bib tap (Long body) Indian make heavy duty 400 grams 432.47 Each 12,109.16
31 2.00 Supply & Fixing 12.7mm NP Two way Bib tap Indian make heavy duty 400 grams 865.49 Each 1,730.98
32 0.00 Supply and Fixing of Ashirvad / Ajay / Astral Flowgurard or equivalent CPVC Pipes and Fittings to meet the 0.00 N.A 0.00
requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard
SDR 13.5 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold
Water (IS 15778:2007)

a 30.00 54.00 mm OD pipe SDR - 13.50 524.70 Rmt 15,741.00

b 35.00 28.60 mm OD pipe SDR - 13.50 147.13 Rmt 5,149.55
c 35.00 22.20 mm OD pipe SDR - 13.50 101.69 Rmt 3,559.15
33 4.00 S & F Gunmetal (GM) Ball valve with SS Ball and SSSpindle as per IS - Class - I, Indian make heavy type - 50 mm 4,431.90 Each 17,727.60
NB Size
34 4.00 S & F Gunmetal (GM) Ball valve with SS Ball and SSSpindle as per IS - Class - I, Indian make heavy type - 25 mm 960.21 Each 3,840.84
NB Size
35 20.00 Supply of round Jali UPVC/SWR pipe fixtures. 23.80 Each 476.00
36 18.00 4" (101.6mm) Nahany Trap [without inlet & jali] UPVC/ SWR pipe fittings [prince/ Sudhakar or any ISI Brand] 97.37 Each 1,752.66

37 0.00 Supplying, laying and jointing in position the following dia metre of Prince / Sudhakar make or equilent quantity 0.00 N.A 0.00
PVC/ SWR pipes 6Kg/sqcm including labour charges for laying, fixing and commissioning the PVC pipes including
couplers/ bends/ tees etc., including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc.,
with solvent jointing as per standard practice as directed during execution.

a 35.00 160mm dia pipe double Socket 688.06 Rmt 24,082.10

b 105.00 110mm dia pipe single socket 323.48 Rmt 33,965.40
c 80.00 75mm dia pipe single socket 179.95 Rmt 14,396.00
38 0.00 Supply of the following Anodized Aluminum Fixtures for Doors and windows 0.00 N.A 0.00
a 16.00 Anodized Aluminum Tower Bolts 10mm dia withISI mark IS 204 -do- 10X 150 mm Long. 94.12 Each 1,505.92

b 16.00 Supply & fixing of Anodized Alluminium Aldrop 16 mm rod and 200 mm long(16mmx200mm (3T-Pieces)) 227.19 Each 3,635.04

c 32.00 Anodized Aluminium Door Handles (IS:208) 150 mm long. 131.99 Each 4,223.68
39 100.00 Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and 719.87 Kgs 71,987.00
diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless
steel railing works using stainless steel welding rods including buffing , polishing , lacquer finishing , to present
seamless finishing etc., complete as directed during execution

41 16.00 Supply & Fixing towel rod (CP) of 24'' long and 3/4'' dia 429.83 Each 6,877.28
42 2.00 Supply of 2 in 1 Health Faucet with 1.50m long tube and wall hook of prayag make (CAT No. 188) as directed 467.36 Each 934.72
during execution.
43 12.00 Supply & Fixing NP soap dish heavy type with NP screws as directed during execution. 255.76 Each 3,069.12
44 4.00 Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality confirming to IS:2556-Part- 2,029.34 Each 8,117.36
4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32
mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963 1979 and fitted with 15 mm
nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard
CI brackets including wooden block 550 x 400 mm - Single C.P. Pillar cock

45 600.00 Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings 130.69 Kgs 78,414.00
using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending
fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic
enamel paint grade-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and
colour including cost of making the holes into RCC or masonry works and making good the same wherever
necessary, including cost and conveyance of all materials, incidental charges etc., complete.

46 2.00 Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked confirming to IS:2556-Part-3-1981 with 1,856.76 Each 3,713.52
"P" or "S" trap of size 580mm x 440mm ISI Mark or equivalent brand approved by the department.

0.00 ELECTRICAL INSTALLATIONS 0.00 Na 0.00

1 50.00 Supply and Fixing of ISI Mark 25mm outer dia heavy grade (2.20mm thickness) with IS:9537 part -3 P.V.C. pipe 100.17 Rmt. 5,008.50
with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls,
RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses /
Channels with MS Clamps, the rate for MS Clamps will be paid Separately)
Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold
Medal

2 20.00 Supply and Fixing of ISI mark 25mm outer dia heavy grade (2.20mm thickness) with IS:9537 part -3 P.V.C. pipe 111.93 Rmt. 2,238.60
for concealed wiring in new / existing brick building, walls, columns, beams duly cutting them to the required
depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar
and colour washing to match the finished surface and masonry work for light, fan and separate plug point
including all labour charges etc., complete.
Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold
Medal

3 25.00 Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as 619.26 Each 15,481.50
per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp 1 Way
Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and
Exhaust fan points in Non-Residential Buildings.
Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI
Grade-B: Modular Switch Makes: Legrand Myrius /Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells
Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / GM (GNINE) / Kolars / Indo asian

4 80.00 Supply and run of 2 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 171.08 Rmt. 13,686.40
1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc.,
complete.
Grade-A: Makes: Finolex/RR Kabel/Havells/Polycab/L&T/KEI
5 6.00 Supply and Fixing of T5,18W LED Batten type fitting with Internal driver with Polycarbonate Material suitable 241.00 Each 1,446.00
to operate on 230VAC,50Hz power supply as per following specification.

0.00 Make:Philips/Osram/Havells/CromptonGreaves / GE / Orkus 0.00 N.A 0.00

0.00 Technical Specifications: 0.00 N.A 0.00
0.00 Electrical parameter Specification 0.00 N.A 0.00
0.00 1) Input power (W) : 18 ±5% 0.00 N.A 0.00
0.00 2) Input Voltage (V) : 230 ±5% 0.00 N.A 0.00
0.00 3) Power factor : >0.95 0.00 N.A 0.00
0.00 4) THD % : <15% 0.00 N.A 0.00
0.00 5)Output Voltage(with load)Vdc:60to80VDC 0.00 N.A 0.00
0.00 6) Output Current (mA) dc : 225 ±5% 0.00 N.A 0.00
0.00 7) Driver Efficiency (%) : ≥ 90% 0.00 N.A 0.00
0.00 8) Operating Voltage : 140 - 270 VAC 0.00 N.A 0.00
0.00 9) Operating Frequency(HZ) : 50 ± 3 Hz 0.00 N.A 0.00
0.00 10) Output open circuit protection : YES 0.00 N.A 0.00
0.00 11) Output short circuit protection : YES 0.00 N.A 0.00
0.00 12) Surge Protection : ≥ 2.5 kV 0.00 N.A 0.00
0.00 Optical Specification 0.00 N.A 0.00
0.00 1)LEDmake:NICHIA(Japan)/OSRAM(German)/PHILIPSLIMITED/CREE(USA)/BRIDGELUX(USA)/SEOL/LEDNIM/EVER 0.00 N.A 0.00
LIGHT / LED / EPISTAR / EDISON
0.00 2)Luminous Flux (Lumen) : 1800 ±5% 0.00 N.A 0.00
0.00 3)Luminous Efficiency (LM/W) : 100 ±5% 0.00 N.A 0.00
0.00 4) Colour Temperature (K) : 5500K to 6500K 0.00 N.A 0.00
0.00 5) CRI : ≥ 80 0.00 N.A 0.00
0.00 6) LED Beam Angle (Degree) : >150 Degree 0.00 N.A 0.00
 0.00 Environmental: 0.00 N.A 0.00
0.00 1)Working Temperature Range: 0to40degreeC (Degree centigrade) 0.00 N.A 0.00
0.00 2) Working Humidity Range : 0 - 95% 0.00 N.A 0.00
0.00 Mechanical : 0.00 N.A 0.00
0.00 1) IP Grade : IP20 0.00 N.A 0.00
0.00 2) Base : NA 0.00 N.A 0.00
0.00 3) Housing : PC 0.00 N.A 0.00
0.00 4) diffuser : PCWarranty : 5 Years 0.00 N.A 0.00
0.00 (As per Previous approved rates videAgt.No:02 /SE(Elec)/2018-19 ) 0.00 N.A 0.00
6 4.00 Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. 1,477.03 Each 5,908.12
Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air/Halonix /Polycab/ G.M. (Xenix)

7 4.00 Fixing of given (9" to 24") Exhaust fan on to the existing hole and giving necessary connections complete. 495.89 Each 1,983.56

8 2.00 Supply and fixing of 12 Modular Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) 240.45 Each 480.90
including all labour charges etc., complete.
Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano -
Amare - Ducor / GM Four-Five
9 4.00 Supply and fixing of 6 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including 160.30 Each 641.20
all labour charges etc., complete.
Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano -
Amare - Ducor / GM Four-Five
10 2.00 Supply and fixing of 6 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in 281.85 Each 563.70
wall with all required accessories including masonry work and all labour charges etc., complete.
Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo
Asian / Siemen / Fortune Art.

11 2.00 Supply and fixing of 12 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed 367.72 Each 735.44
in wall with all required accessories including masonry work and all labour charges etc., complete.
Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo
Asian / Siemen / Fortune Art.

12 4.00 Supply & fixing of 1 1/4" dia 'B' class GI pipe not exceeding 1.5Mtr long with necessary bending (120° to 135°) 1,206.46 Each 4,825.84
to the wall or to the pole as directed during execution duly grouting 2 Nos. of MS angles of 35x35x5mm having
length 20Cm (grouted portion of MS angle into the wall 7.5cm) and fixing with 2 Nos. of MS clamps fabricated
with 25mmx3mm MS flat with suitable holes and 4 Nos. of 3/8"x2" MS bolts, nuts & washers for fixing on the
wall / 2 Nos. of suitable MS clamps with bolts, nuts for fixing to the pole etc., complete. A 16Amp fuse unit is to
be fixed to the MS angle / clamp and giving necessary connections with 14/0.3mm PVC copper flexible wire
from pole to the fuse unit and to the fitting or from Ceiling rose in the building to the fuse unit and to the fitting
with link clips etc., and the GI pipe has to be painted with two coats of enamel grey paint over one coat of red
oxide paint. Fixing charges including the cost of MS angle, MS clamps, bending of pipe, bolts, nuts, fuse units
etc.

13 4.00 Supply and transportation of .60 W.. LED Street light Luminaire made of pressure diecast alluminium body with 6,755.42 Each 27,021.68
powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power
LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66,
Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional
Surge protection 10 KV with optics
distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc.,
complete.
a) LUMINAIRE MAKE :
Wipro (Skyline) / Philips (Green line) /GE-Venture / Crompton(Neo Series)/Bajaj (Edge)/Halonix(Lumos - Super)
/Havells (Endura Series)/Capart(Premium)/ Greenlites(Hi-Lux) /Polycab/Keselec/ HPL(City
Vision)/Jaquar(Premium)/Eveready/ Surya (Pollux) / Fortune Arrt (Leaf)
b) LED MAKE:PHILIPS LUMILEDS/ CREE/NICHIA/ OSRAM/SAMSUNG / LG.

14 2.00 Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, 3,331.19 Each 6,662.38
for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc.,
complete (sizes in mm)
Make : Hensel / Sadhrish / Sintex
15 300.00 Supply and transportation of 25 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG 240.45 Rmt. 72,135.00
cable as per specification confirming to IS:7098 (Part-I) / 1554-1.
Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

16 300.00 Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete. 31.11 Rmt. 9,333.00

17 300.00 Supply and fixing of fabricated M.S clamps made out of various sizes of (25mm x 3mm, 25mm x 6mm etc.) MS 123.96 Kg. 37,188.00
flat with necessary holes on either side with suitable MS bolts and nuts and painting 2 coats of enamel black
paint over one coat of red oxide suitable for fixing of PVC pipes, Conduit pipes etc., on Trusses / Channels etc.
including all labour charges etc., complete.

18 8.00 Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 25 Sq.mm cable as per IS 17.17 Each 137.36
specification duly crimped with crimping tool, PVC tape etc., complete.
Make: Dowels / Jainson / Comet.
19 2.00 Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, 114.50 Each 229.00
IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 25
Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of
1100 volt grade as required of size.
Make: Dowels / Comet / SMI

20 5.00 Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width 265.78 Cum 1,328.90
and depth and depositing the same on bank as directed during execution etc., complete .

21 2.00 Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control 85.87 Each 171.74
Box) cover frame and giving necessary connections including all labour charges etc., complete.
Grade-B: Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio /
Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolors / Indo Asian / GM (GNINE)

22 2.00 Supply and fixing of 6 /10 Amps 2 pin 1 module Modular Socket on to the existing metal box (Switch Control 85.87 Each 171.74
Box) cover frame and giving necessary connections including all labour charges etc., complete.
Grade-B: Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio /
Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolors / Indo Asian / GM (GNINE)

23 2.00 Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control 108.77 Each 217.54
Box) cover frame and giving necessary connections including all labour charges etc., complete.
Grade-B: Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio /
Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolors / Indo Asian / GM (GNINE)

24 2.00 Supply and fixing of 16 / 6 Amps 1 Way Combined 2 Module Modular Socket with Shutter on to the existing 166.02 Each 332.04
metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc.,
complete.
Grade-B: Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio /
Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolors / Indo Asian / GM (GNINE)

25 2.00 Fixing of given 25 Ltrs to 50 Ltrs Storage type water heater with 2 Nos. of Nylon / PVC / Metallic hose pipe etc., 852.86 Each 1,705.72
on wall with 4 Nos. of 3/8" x 4" bolts, nut & washers with cement packing including connections etc.,
complete.
26 14.00 Supply and Fixing of T5/T8, 9W LED Batten type fitting with Internal driver with Polycarbonate Material 224.00 Each 3,136.00
suitable to operate on 230V AC, 50 Hz power supply as per following specification.
Make: Philips / Osram / Havells / Crompton Greaves / GE / Orkus

0.00 Technical Specifications: 0.00 N.A 0.00

Electrical parameter Specification.
1) Input power (W) : 9 ±5%
2) Input Voltage (V) : 230 ±5%
3) Power factor : >0.95
4) THD % : <15%
5) Driver Efficiency (%) : ≥ 90%
6) Operating Voltage : 140 - 270 VAC
7) Operating Frequency(HZ) : 50 ± 3 Hz
8) Output open circuit protection : YES
9) Output short circuit protection : YES
10) Surge Protection : ≥ 2.5 kV

0.00 Optical Specification : 0.00 N.A 0.00

1) LED make : NICHIA (Japan)/OSRAM (German)/PHILIPS LIMITED / CREE (USA)/BRIDGELUX(USA/SEOL /LEDNIM
/EVERLIGHT / LED / EPISTAR / EDISON
2) Luminous Flux (Lumen) : 900 ±5%
3) Luminous Efficiency (LM/W) : 100 ±5%
4) Colour Temperature (K) : 5500K to 6500K
5) CRI : ≥ 80
6) LED Beam Angle (Degree) : >150 Degree

0.00 Environmental: 0.00 N.A 0.00

1)Working Temperature Range : 0 to 40 degree C (Degree centigrade)
2) Working Humidity Range : 0 - 95%

0.00 Mechanical : 0.00 N.A 0.00

1) IP Grade : IP20
2) Base : NA
3) Housing : PC
4) diffuser : PC
Warranty : 5 Years

27 2.00 Supply of 100 Litres Storage Water Heater power supply 230 Volts AC , 50HZ Single Phase,3KW heating 29,322.00 Each 58,644.00
element, Titanium enamel coating etc.,
0.00 Specification: 0.00 N.A 0.00
0.00 Capacity : 100 Lts 0.00 N.A 0.00
0.00 Mounting :Vertical 0.00 N.A 0.00
0.00 Outer Body:Mild Steel 0.00 N.A 0.00
0.00 Inner Tank Material:Mild steel 0.00 N.A 0.00
0.00 Inner Tank Coating :Titanium plus enamel coating 0.00 N.A 0.00
0.00 Inner Tank coating Thickness:180 to 500 micron 0.00 N.A 0.00
0.00 Puf Type:Zero ODP polyurethane insulation 0.00 N.A 0.00
0.00 Maximum rated pressure : 8 bar 0.00 N.A 0.00
0.00 BEE star Rating : 5 star 0.00 N.A 0.00
0.00 Heating Element:3KW copper 0.00 N.A 0.00
0.00 Power cord:3core X 1.5 Sq.mm Cable with plug 0.00 N.A 0.00
0.00 Power Supply:230V AC, 50Hz, Single phase 0.00 N.A 0.00
0.00 Warranty(Years): 0.00 N.A 0.00
0.00 Product:2 years 0.00 N.A 0.00
0.00 Heating Element:3yrs 0.00 N.A 0.00
0.00 Inner tank:7 yrs 0.00 N.A 0.00
0.00 make & Model:RACOLD(Platinum Plus)/VENUS/ Equalent TTD Approval Brands. 0.00 N.A 0.00
RupeesThirty Two lakhs Sixty thousand Six hundred and Ninety Six and paise Eleven Only 32,60,696.11