WA8021V5 Quick Start-01 (TIME, Malaysia)
WA8021V5 Quick Start-01 (TIME, Malaysia)
WA8021V5 Quick Start-01 (TIME, Malaysia)
Issue 01
Date 2020-09-04
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: https://www.huawei.com
Email: [email protected]
Contents
1 Product Overview.................................................................................................................... 1
2 Working as a Router............................................................................................................... 3
3 Working as a Wi-Fi repeater.................................................................................................7
4 Parameter................................................................................................................................12
5 FAQs..........................................................................................................................................13
1 Product Overview
The WA8021V5 is a home edge ONT that provides gigabit dual-band Wi-Fi and
gigabit network ports.
NOTE
Pairing button When the edge ONT has detected a device that can be
paired, press the pairing button on the edge ONT and
release it. The indicator blinks quickly. The device that
can be paired connects to the Wi-Fi of the edge ONT.
Reset button Press and hold the Reset button of the device for more
than 2 seconds using a needle, and release the button
after the indicator turns off. After the device restarts and
the red indicator turns on, the factory settings are
restored.
Description of Indicator
Status Description
Red: Blinking slowly The edge ONT has detected a device that can be paired.
(once per second)
Red: Blinking quickly The edge ONT is being paired with Huawei gateway in
(twice per second) one-click mode.
2 Working as a Router
NOTE
After being connected to a Huawei gateway of a certain model using a network cable, an
edge ONT automatically adapts itself as a Wi-Fi repeater. The Wi-Fi name and password
are automatically synchronized from the Huawei gateway. You can access the Internet
instantly without configuring the Wi-Fi name and password.
1. Connect cables.
2. Connect a phone or PC to the Wi-Fi of the edge ONT. For the Wi-Fi name and
password, see the SSID and SSIDPWD on the device nameplate.
NOTE
You can also use a network cable to connect a PC to the edge ONT, and then set the
Internet access mode on the PC.
3. Open the browser. The configuration page is automatically displayed. Click
Start, the edge ONT will automatically detect your Internet access mode.
NOTE
1. Some mobile phones automatically display the configuration page following the
Wi-Fi connection page.
2. If the configuration page is not automatically displayed, enter the IP address in the
address box of a browser. (For details about the IP address, see the product
nameplate.)
3. If the device detects that the Internet access mode is dial-up, you need to enter the
broadband account and password. If you forget the broadband account and
password, contact your ISP to retrieve the account and password.
4. On the Service Provider Remote Management Platform page, the Server
address field is automatically populated after you select an Area. You can
also manually enter a Server address. Then select the privacy statement, and
click Apply to enable the function of service provider remote management.
NOTE
● This step applies only to general products. Skip this step if it is not displayed on the
product page.
● Select an option as instructed by your service provider. If you do not select an
option or select an incorrect option, the remote software upgrade function will be
unavailable. You can also click Skip, and configure this option on the Service
Provider Remote Management Platform page later.
5. Set a new Wi-Fi SSID and management password of the edge ONT. You can
use the Wi-Fi password as the device management password. Click Next.
After the configuration is complete, reconnect to Wi-Fi.
NOTE
1. If band steering is enabled, 2.4 GHz Wi-Fi and 5 GHz Wi-Fi are both supported,
and the edge ONT automatically selects a faster Wi-Fi frequency band for you.
2. You can connect devices such as PCs to other network ports of the edge ONT using
network cables to access the Internet.
If you need to extend the existing Wi-Fi, you can use the WA8021V5 as a Wi-Fi
repeater to expand Wi-Fi coverage.
4. Wait until the edge ONT indicator turns steady white, which indicates that the
pairing is successful.
5. Move the edge ONT to the position where the Wi-Fi coverage is to be
expanded. After the indicator is steady white, the edge ONT can access the
Internet. No further operation is required.
NOTE
1. The Wi-Fi name and password of the edge ONT are automatically synchronized
from the Wi-Fi of the Huawei gateway.
2. You can connect devices such as PCs to network ports of the edge ONT using
network cables to access the Internet.
3. To achieve better signal coverage, it is recommended that:
● There are no more than two walls between edge ONTs and the Huawei
gateway.
● Edge ONTs and the Huawei gateway are placed on the same floor.
NOTE
You can also use a network cable to connect a PC to the edge ONT, and then set the
Internet access mode on the PC.
NOTE
1. Some mobile phones automatically display the configuration page following the
Wi-Fi connection page.
2. If the configuration page is not automatically displayed, enter the IP address in the
address box of a browser. (For details about the IP address, see the product
nameplate.)
3. Select the Wi-Fi name to be connected, enter the Wi-Fi password, and click
Next.
4. Set the administrator login password. You can use the Wi-Fi password as the
device management password. Click Next. After the configuration is
complete, reconnect to Wi-Fi.
NOTE
1. The Wi-Fi name and password of the edge ONT are automatically synchronized
from the Wi-Fi selected in 3.Select the Wi-Fi name ....
2. You can connect devices such as PCs to network ports of the edge ONT using
network cables to access the Internet.
Layout Principles
NOTE
You can also check on the LinkHome app whether the distance between the
WA8021V5 and the home gateway is optimal.
4 Parameter
Item Specification
5 FAQs
What can I do if a problem occurs when I set the Internet access mode?
You can check the indicator status of the WA8021V5. If the indicator is steady red,
Internet access is unavailable.
1. Cannot find the Wi-Fi of the edge ONT: Ensure that the device is powered on.
Wait for a moment. After the device is started, scan for the Wi-Fi again.
2. Cannot access the configuration page: Ensure that the mobile phone is
connected to the Wi-Fi network of the device and enter the IP address in the
address box of a browser. (For details about the IP address, see the product
nameplate.)
3. Cannot access the Internet after the settings: Ensure that the home gateway
connected to the device can access the Internet. If a network cable is
connected, ensure that network cable is connected securely.
NOTE
After the device is restored to factory settings, the device configuration parameters are
cleared and need to be reconfigured.
Does the edge ONT support 5G Wi-Fi? How to connect to the 5G Wi-Fi?
Yes. The device supports 5G Wi-Fi. By default, the 2.4G/5G Wi-Fi names are the
same. The device automatically connects to an optimal frequency band. To fix the
connection to the 5G frequency band, disable the Dual-Band Steering as follows:
1. Connect a mobile phone to the Wi-Fi network of the edge ONT.
2. Enter the IP address in the address box of a browser and press Enter. (For
details about the IP address, see the product nameplate.)
3. On the displayed login page, enter the login password as prompted.
4. Choose My Wi-Fi and turn off Dual-band Combination. Then, two Wi-Fi
names are displayed. Connect to the Wi-Fi with the suffix _5G.
NOTE
1. If the Wi-Fi name and password are synchronized from those of a gateway or router, see
the changing method described for the gateway or router.
2. If you forget the login password, restore the edge ONT to its factory settings and set the
Internet access mode again.