Disaster Management - Module 2
Disaster Management - Module 2
Disaster Management - Module 2
com/
MODULE 2
Hazard:
om
Active:
➢ A hazard is said to be active when it strikes a habitat When this happens it is no longer a hazard but
a disaster .c
CLASSIFICATION OF HAZARDS
es
Based on the origin hazard is classified into:
Biological Hazard: Process or phenomenon of organic origin or conveyed by biological vectors, including
ot
pathogenic micro-organisms, toxins and bioactive substances. Examples of biological hazards include
epidemic and pandemic diseases, plant or animal contagion, insect or other animal plagues and infestations.
an
Geological Hazards: Geological process or phenomenon that may cause loss of life, injury or other health
impacts, property damage, loss of livelihoods and services, social and economic disruption, or
l
ra
environmental damage. Geological hazards include internal earth processes, such as earthquakes, volcanic
activity and emissions, and related geophysical processes such as mass movements, landslides, rockslides,
surface collapses, and debris or mud flows. Hydro-meteorological factors are important contributors to some
ke
of these processes. Tsunamis are difficult to categorize; although they are triggered by undersea earthquakes
and other geological events, they essentially become oceanic process that is manifested as a coastal water-
related hazard.
Hydro-metrological Hazards: Process or phenomenon of atmospheric, hydrological or oceanographic
nature that may cause loss of life, injury or other health impacts, property damage, loss of livelihoods and
services, social and economic disruption, or environmental damage. Hydro-meteorological hazards include
tropical cyclones (also known as typhoons and hurricanes), thunderstorms, hailstorms, tornados, blizzards,
heavy snowfall, avalanches, and coastal storm surges, floods including flash floods, drought, heat waves and
cold spells. Hydro meteorological conditions also can be a factor in other hazards such as landslides, wild
land fires, locust plagues, epidemics, and in the transport and dispersal of toxic substances and volcanic
eruption material.
Anthropogenic Hazards: Hazards induced entirely or predominantly by humans, including technological
and socio- natural hazards. Man-made hazards (also known as human-induced hazards or anthropogenic
hazards) are a collective term that covers the range of hazards that result from human activities. They are
distinguished from natural hazards. The range of man-made hazards includes technological and socio-
natural hazards, and those that may arise from the relationships within and between communities
HAZARD MAP
• A hazard map is a map that highlights areas that are affected by orare vulnerable to a particular
hazard.
• They are typically created for natural hazards, such as earthquakes, volcanoes, landslides, flooding and
tsunamis.
• Hazard maps help prevent serious damage and deaths.
om
• The purpose of hazard mapping is to gather together different hazard related information in one
map.
• Hazard mapping involves a graphical representation of the location, magnitude and temporal
.c
characteristics of hazards on 2 or 3 dimensional surfaces.
•
es
Two objectives of hazard map
• To make the people of the region aware of the hazards likely in the region
• To help disaster managers and other stake holders to plan and be prepared for the disaster as
ot
Spatial characteristics such as location, distribution and dimension; temporal (duration and speed of
onset) and magnitude are the major data requirements for hazard mapping. Such information can be
obtained through the following sources:
1. Base maps: Base maps represent topographic layers of data such aselevation, roads, water bodies,
cultural features and utilities. It must be plan metric, i.e. a representation of information on a plane
in true geographic relationshipand with measurable horizontal distances.
2. Remotely sensed images: Satellite images are sources of readily available information of locations
on the earth’s surface comparedto conventional ground survey methods of mapping thatare labour
intensive and time consuming.
3. Field data: Through the advances of technology, ground surveying methods using electronic survey
systems like Total Station, the global positioning systems (GPS) and Laser Scanners, have all greatly
increased opportunities for data capture in the field.
Maps are the most operative way to convey actual and relative location. Maps can be simply defined as flat
geographic portrayals of information through the use of symbols. Such approaches help hazard maps not to
just convey the existence of natural hazards, but also to note their location, severity, and likelihood of
occurrence in an accurate, clear, and convenient way. The application of cartography in hazard mapping will
eventually lead to the creation of:
Base map which contains sufficient geographic reference information to orient the user to the location of the
hazard.
Scale and coverage which draw the relationship between linear measurement on the map and the actual
dimension on the ground. Small-scale maps show less detail for a large area and are applicable for regional
development planning. Large-scale maps, on the other hand, reveal more detail for a small area and are more
suitable for local or community level development planning. The scale used for a hazard map is dependent
upon not only the hazard information to be shown, but also upon the scale of the base map. Therefore, the
choice of scale for a hazard map may consider the following issues:
o Number of hazards to be displayed at a go;
o The hazard elements necessary to be displayed;
o Range of relative severity of hazards to be shown;
om
o The area of interest to cover;
o The use of the map with other planning documents and; and
o Function of the map, for example, whether it is to be an index or detail map.
.c
Types of symbols: On a hazard map, symbols are used to represent reality. Symbols are selected for their
legibility and clarity and/or map production characteristics. Location, for instance, can be depicted using one
es
of these basic geometric symbols – point, line or an area. Points are more preferred for displaying volcanoes,
while areas have been used for showing flooding.
ot
Many approaches to hazard mapping have been developed. In all such approaches used, the key factors of
consideration in the spatial analysis (valuation of likelihood losses of hazards) is appreciating that:
• all components of a hazard assessment vary in space and time; and
l
• as the consequences of hazards are usually large, it is prudent to include vulnerability and risk
ra
• Participatory mapping is a technique that allows for the integration of local level participation and
knowledge in the map production and decision taken process.
• It is an interactive process that draws on local people’s knowledge and allows them to create visual and
non-visual data to explore social problems, opportunities and questions.
• In participatory mapping, the main objectives are to:
➢ collect evidence assets of the study area and issues during the mapping process;
➢ interpret the study area mapping experience and related experience to answer questions that
have been developed about the study area; and
➢ develop a presentation that synthesises the participatory mapping experience and presents the
conclusion and possible questions for further investigation.
• Whenever participatory mapping is to be conducted, the foremost issue of consideration is the ‘goal of
the work’ which outlines the nature and essence of activities to be done.
• Once the goal has been decided, the next stage is the organisation of activities of participatory mapping
in two blocks – preparation and implementation.
om
• The preparation involves ‘scouting’ and ‘designing survey instrument, materials and directions’.
• The implementation may be organised into sessions (usually four) - preparation of participants or people
involved in the participatory mapping activity; undertake participatory mapping field trip; make
presentations and carry out debriefing exercises.
.c
es
Applications of Hazard Maps
ot
Hazard maps have various applications that may be broadly captured as in spatial planning, risk reduction
measures, instruments used in emergency planning and raising awareness among the population
an
• Spatial planning: Hazard maps provide a basis for communal and district spatial planning processes (e.g.
definition of hazard zones in development plans and formulation of building regulations).
l
ra
• Risk reduction measures: Hazard maps assist in the localisation and dimensioning of hazard protection
measures (e.g. flood protection structures, avalanche barriers, etc.)
ke
• Instruments used in emergency planning: Hazard maps indicate where the biggest risks arise and the
events most likely to occur. This information can be used as a source of orientation in emergency
planning.
• Raising awareness among the population: Hazard maps help to demonstrate potential risks to the
population and to increase awareness of eventual protective measures.
VULNERABILITY
Vulnerability Types
• It denotes the characteristics and circumstances of an individual, community or area that could be
subjected to harm from a hazardous situation.
• There are four types of vulnerability (UNISDR) –Physical –Economic –social –Environmental
• In a disaster situation, the vulnerable population includes the poor, women and children and the disabled.
In general, they are the most affected.
• •The vulnerable areas are those which are very close to the disaster site.
For More Study Materials : https://www.keralanotes.com/
https://www.keralanotes.com/
• •In the case of a bomb explosion, assets and people living or present near the site of the blast are the
most seriously affected than people far off from the area.
Factors of Vulnerability
• Poorly designed and maintained infrastructure
• Inadequate safety awareness and safety measures for assets
• Lack of awareness and adequate information about hazards and risk
• Inappropriate management of risks identified and lack of preparedness to face hazards
• Lack of proper management of resources and environment
Physical Vulnerability:
• Physical Vulnerability may be determined by aspects such as population density levels, remoteness of a
settlement, the site, design and materials used for critical infrastructure and for housing. Physical
vulnerability also includes impacts on the human population in terms of injuries or deaths.
• •Example: Wooden homes are less likely to collapse in an earthquake, but are more vulnerable to fire.
Social Vulnerability
• •Social Vulnerability refers to the inability of people, organisations and societies to withstand adverse
impacts of hazards due to characteristics inherent in society.
om
• •It is linked to the level of wellbeing of individuals, communities and society.
• •It includes aspects related to levels of literacy and education, the existence of peace and security, access
to basic human rights, systems of good governance, social equity, positive traditional values, customs
.c
and ideological beliefs and overall collective organisational systems.
• •Example: When flood occurs, elderly people and children are unable to protect themselves
es
Economic Vulnerability
ot
• •The level of vulnerability is highly dependent upon the economic status of individuals, communities
and nations.
an
• •The poor are usually more vulnerable to disasters because they lack the resources to build sturdy
structures in their homes and put other engineering measures in place to protect themselves from being
negatively impacted by disasters.
l
ra
• •Example: Poorer families may live in low-lying slum areas because they cannot afford to live in safer
(more expensive) areas. They are more vulnerable when a flood occurs and their belongings or even
their homes get washed away.
ke
Environmental Vulnerability
• •Natural resource depletion and resource degradation are key aspects of environmental vulnerability.
• •Example: People living in hilly areas become vulnerable because of environmental degradation. Their
habitats have to necessarily be on hill slopes due to the terrain features. Deforestation and cutting of trees
on hill slopes makes them vulnerable to hazards from landslides.
Vulnerability Assessment
• This refers to the quantification of the degree of loss or susceptibility to an element at risk. The
assessment is essential when conducting a risk assessment.
• Vulnerability assessments have not always been a part of risk assessment, but in recent times, they have
become indispensable due to the recognition that disasters occur as a result of interactions between
hazards and vulnerable elements.
• Variations exist in the method of quantification of vulnerability based on the following:
a) Type of vulnerability being measured, that is, it is physical, social, economic or ecological.
b) The scale at which vulnerability is being measured, whether at the individual, household or
community level.
• Historical data on the magnitude of a hazard and the level of damage it caused to specific elements such
as buildings built from sand Crete or wood.
• Socio-economic data such as level of education, access to pipe borne water, access to secure shelter,
social networks, sanitation, income level, access to credit, access to land, access to technology etc. The
emphasis here is on the level of access that an individual, household or community has to various assets.
• Level of exposure to hazardous conditions
• Data on policies, institutions and processes which influence capacity of individuals, households and
communities.
Physical Vulnerability:
• Buildings: The vulnerabilities of buildings are based on the location of the site, the design, materials
used for construction, construction techniques used, and its proximity with other buildings
• Infrastructure: In considering infrastructure, three broad groups are to be considered—they include
om
transportation systems like roads, railways, bridges, airports, etc., utilities like water supply, sewage and
power supply; and communication network.
• Other critical facilities: Critical facilities are vital to the functioning of the societies during times of
.c
disaster and are considered as lifelines. Examples include hospitals and other essential services;
emergency services; communications systems; buildings and structures with cultural importance; and
es
certain structures such as dams that are essential to the long-term sustainability of the economy.
ot
l an
ra
ke
Socio-economic vulnerability is indicator-based and can be assessed by analysing the level of exposure and
coping mechanisms of individuals, households and communities. Analysis of exposure and coping is done
taking into consideration policies and processes and adaptation strategies of affected individuals, households
and communities.
• Certain groups of people like single parent families, pregnant or lactating women, mentally and
physically handicapped people, children and the elderly require special attention and focus.
• Certain other groups like migrants, people residing at remote areas also require special attention. Risk
perceptions for these groups have to be assessed, and the required awareness programs have to be
initiated
• Direct losses potential: Direct losses could include damage or destruction of physical and social
infrastructure and the likely cost incurred to repair or replace it. It could also include costs related to the
damages to crops and other means of production.
• Indirect losses potential: Indirect losses include the impact due to loss of production, employment,
income generating activities, and the likely inflation in the society. While direct cost is easy to calculate,
assessment of indirect costs is difficult.
om
.c
es
ot
l an
ra
ke
disaster risk arises out of an interaction between a hazardous condition and vulnerable elements. However,
disasters only occur when the risk materialises
• The Sendai framework for disaster risk reduction and its immediate predecessor, the Hyogo framework
for action, both call for identification and assessment of disaster risk. Thus, risk assessments form an
important aspect of risk reduction strategies.
om
or populations, property or the environment. Risk analyses generally contain the following steps:
Hazard identification, hazard assessment, elements at risk/exposure, vulnerability assessment and risk
estimation.
➢ Risk evaluation: This is the stage at which values and judgement enter the decision process by
.c
including the importance of the risk and associated social, environmental, and economic
consequences, in order to identify a range of alternatives for managing the risk.
es
Contemporary approaches to risk assessments
ot
• Multi-hazard: The same area may be threatened by different types of hazards. Each of these hazard types
an
has different areas that might be impacted by hazard scenarios. Each of the hazard scenarios also might
have different magnitudes. For instance, water depth and velocity in the case of flooding, acceleration
and ground displacement in the case of earthquakes. These hazard magnitudes would also have different
l
ra
impacts on the various elements at risk, and therefore require different vulnerability curves.
ke
• Multi-level: Risk assessment can be carried out at different levels. Depending on the objectives of the
risk study, it is possible to differentiate between national, regional, district and local policies, plans and
activities to see how they have contributed to increased or reduced risk, their strengths and weaknesses
in dealing with risks, and what resources are available at the different levels to reduce risks.
• Multi-stakeholder: Risk assessment should involve the relevant stakeholders, which can be individuals,
businesses, organisations and authorities.
• Multi-phase: Risk assessment should consider actions for response, recovery, mitigation and
preparedness.
• Qualitative methods: This involves qualitative descriptions or characterisation of risk in terms of high,
moderate and low.
o These are used when the hazard information does not allow us to express the probability of
occurrence, or it is not possible to estimate the magnitude.
o A risk matrix shows on its y-axis probability of an event occurring, while on the x-axis potential loss.
o The probability is described categorically as low, medium and high, while the potential loss is also
described similarly.
om
• Quantitative methods: This aims at estimating the spatial and temporal probability of risk and its
magnitude. .c
o In this method, the combined effects, in terms of losses for all possible scenarios that might occur,
es
are calculated.
o There are several approaches; they express the risk in quantitative terms either as probabilities, or
expected losses.
ot
o In this approach, risk is perceived as follows: Risk = Hazard * Vulnerability * Amount of elements-
at- risk
l an
ra
ke
om
.c
es
ot
l an
ra
ke