@ STANDARDTEC ENGINEERS INDIA PVT. LTD.

NABL ACCREDITED LABORATORY AS PER ISO/lEC 17025r 2O17

SAFE BEARINC CAPACITY SOIL

(As Der IS 6403-1981)

DAIAT
chalnagc / Locadon '
Sample No
Depth of Footing / .Sample Collected (d)
Widti of FoodnS G)
Shape of FootinS
Dry Density (Ydry) Ett /cc Ydry
Bulk Dennty( vb) ((1+w/100fYdry) 8m/cc 1.965 10.6

Shear Par"ametersr (C & o) Ybulk = 2.L7329

Cohesion I C) kg{/cm'

An8le oflntemal Frlcdon (O ) degrees

Specific Gravity (Gs)

void rado (e)
e = (Gf1l/Ydry)-1)
Saturated density vsat 3nr/cc
vsat = ((cs+e)vw/ 1+e)
Submersible DensttY vs (vsat -1) grr]/cc

over Burden Pressure (q)[ (d xvs)/10) nglcm

Etrect of Water Table (W) : 1.00 Water table Considered
water table considered as perlS 6403 cluase no 5.1.2.4 O),
'IVpe of Failure is: Local Shear Fallure
lS 6403 t ble No - Bea ty Factors Considered
N' 5.834 N',,. 4_759

Breadth of footing assumed (B)

Depth ofcround Water Table' : 3.50 n Hence !\f= 1,00

as per lS 6{03 table No . 2, Shape Faclors Constdered

Shape Factors for Coltllcout Stdp

s* 1 s.. 1 $=1
Depth Faclor Corr.ction is to be applied As per lS 6403 Ouase no 5.1.2.2 (only whed back fillin8 i5 doDe with
proper compacdon.)
pEErH ractons l{f 1.632
dc= 1,103 j dq=dr= 1.201
InclhadoD Factors ic = lc = l, = 1 as an8le oflncllMdon is taken as 0o

Facror ofsafety( F ) | 2.5

as per IS 6,t03 table No - 1, BearinS C.paclty Facto6 Applied

sEC= { ( C N'. 1 4 U+ q(N so dn io +} x B vb N', S, d, L w}
"'1)
F

= 1lL.r71 + 4.668 a 1.863)

2.5

= ?.705 0.000 3.082 0.000

= 3.082 Kg/cm'?
Net safe BearlDg capaclty (NSBC)= 30.8 t/m?
 @ STANDARDTEC ENGINEERS INDIA PVT. LTD.
NABLACCREDITED LABORATORY AS PER ISO/IEC 17025r2017

SAFE BEARING CAPACITY SOIL

(As Der lS 6403-19811

DAIAi
chehage / locadotr .
SaDple No
Depth of FootinS / .sample Collected (d)
width of Foodng (B)
Shape of FootinS
Dry Density fYdry) 8m/cc Ydry
Sulk Density( Yh
) ((1+w/100)'Ydry) gm/cc \.99 10.6

Shear ParaDeters: (C & O) Ybulk = 2.20094

Cohesion ( C ) kgf/cmr

AnSle oflnternal Frlcdon (O ) degrees

Specific Grrvity (Gs)

Void rdtio (e)
e = (cs.l)/Ydry)-1)
Saturated denslty Ysat cm/cc
vsat = ((cs+elvw / 1+e)

Submerslble Density vs (vsat '1) gn/cc

overBu.den Pressure (qX (d xvs)/10) Kg/cm
Effect of Water Table [W) : 1.00 Water table Considered
Water table Consideredas per lS 6{03 Cluase no 5.1.2.4 O),
'Iype of Failure is : lrtermedl.te Shear F.llu.e
lS 6403 table No - 1 Beari acity Factors Considered

Breadth offooting assumed [B)

N
" ";l N',,= 5.801

Depth ofcround WaterTable' : ri(l m Hencew'= lill

as per IS 6403 table No ' 2, Shape Factors Considered
Shape Fac(ors for Condtaous Strlp
s-1 sq. 1 s,. 1

Depth Factor Correctjon is to be applied As per IS 6403 Cluase no 5.1.2.2 (only when back fillin8 is done with
proper compaction.l
DEPTH FACTORS Nf 1,698
dc 1419 : dq=dl- 1.209

lnclination Factors r, = iq = r. = 1 as angle ofinclinatron is taken as 00

Factor o[saferyl F)
earing Capacity Fadors Applied
q ( N'o-l) So dq ic +U x B vh N', S, d" i"W)

1( 0.867 5.630 2.31s l

2.5
0

0.000 3.525 0.000

3,525 Kz/cmz
Net safe Eearlns caDacltv txsBc)= 35.Z
 @ STANDARDTEC ENGINEERS INDIA PVT. LTD.
ItA[LACCREDIIED

SAFE BEARINc CAPACITYSOIL

L BoRAIORY AS PER lsO/lEC 17025r2017

(As pcr lS 6,+03-1981)

DAIAT
chaltra8e / Locadon'
SaEple No
Depth of Footing / .Sample Collected (d)
Wldth ofFoodns (B)
Shape of Footing
Dry Density (Ydry) sm/cc Ydry
Bulk Density( vi) ((1+r,t /100)'Ydry) srn/cc 1.975 10.3

Shear Par.Eete$: (C & o) Ybulk = 2.17843

Cohesion ( C) kgf/cm:
AnSle of lntemal Fricdon ( O) degrees
Specific Gravity (Gs)
Void rado (e)
e= (cr.l)/Ydry)-1)
Saturated densi9 vset sm/cc
vsat=((Gs+e)vwl1+e)
Submersible Density vs (vsat -1) srn/cc
over Burden Pressure (qX (dxvs)/10) kg/cmr
Effectof Water Table (wl : 1.00 Water table Considered
Water table Considered as per lS 6403 Cluase no 5,1,2.4 (b),
TJ4e of Failure ir : lDterbedLte Sheer FelluE
lS 6403 table No - Beari ty Factors Considered
N'

Breadth of footinS assumed (Bl

14.S28 I "tf"-;;l b ?o7 N',,. 5.r75

Depth of Ground Water Tablet : 3.50 m Hence W= 1,00

as pe.lS 6403 table No - 2, Shape Facto6 Conrldered
Shape Factors for Condlcout StrlD
sFl s." 1 sv= 1

Depth Factor Correcdon is to be applied As per IS 6403 Cluase no 5.1.2.2 (only when back filltn8 is done with
proper compacdon.)
DEPTH trACfONS Nf 1.66.+

dc= 1.41 ; dq=dr= ,-205

lncllnadon Factors l. = lo = i, = 1 as ar8le ofincltnadon istaken a5 O0

Factor ofsafety( F ) | 2.5

as p.r lS 6403 table No - 1, BearinS Capacity Factors Applied

SE{= { ( C N'.sc4iJ+q (N'e-l) Sqd!iq +L xB Yr N'"S" d"i'W)
F

= 1 { 0.9s6 + 5.057 + 2.038 )

2.5
0

= 8.051 0.000 3.220 0.000

= 3,220 t<E/cm'1

t{et safe B€arlnr c.Daclty INSBCI= 32.2 t/nl