SAUDI ELECTRICITY COMPANY

Engineering and Generation Projects Sector

Approved Vendor List

Total Number of Files 1744

Wednesday, March 11, 2020 Page 1 of 304

 General Instructions

1. This document (Approved Vendor list) has been developed by Generation Project Engineering
Sector- Engineering Department.

2. All procurements shall be made by Contractors/Subcontractors according to the approved list.

3. The Contactor shall ensure that all his selected vendors should have valid ISO 9001 QC
Certificate for particular facility and equipment while commencing procurement.

4. The procurement outside the approved list shall not be allowed. However, in special cases such
as for example (Approved manufacturer decline to quote, requested product not listed in the AVL …
) the EPC Contractor shall send Product PQ request to the concerned Execution Dept, describing
the circumstances and enlisting the reasons for not utilizing the SEC approved vendor list. The
concerned Execution Dept. shall thoroughly scrutinize the validity of the contactor request. In case of
valid reasons and considering impact on the progress, fill the PQ request (form 7.12) and send it to
Generation Technical Qualification Division [email protected]

5. Approval / disapproval by COMPANY of prequalification vendor / manufacturers documents shall

not relieve the CONTRACTOR from his obligations under the Contract.

6. The manufacturer listings shall be interpreted in the following manner:

6.1 Manufacturer listed with the word "None" as a "Limitation". All products from the manufacturer in
the given category are acceptable.

6.2 Manufacturer listed with a "Limitation": Only the product that meets the "Limitation" is
acceptable. If noted as being manufactured "Under License”, only products made under the terms of
the license agreement are acceptable.

6.3 Manufacturer is listed with a specific "Location”: Only products made in the specific location or
area(s) are acceptable.

7. Company reserves the right to revise the Approved Vendors List (AVL) at any time prior to
submission of the Bidder’s Commercial Proposal, however, this is only applicable to foreign
companies. In terms of local companies, and regarding of ITB [General Instruction for Preferred
Procurement], this restriction does not apply and as such the Company reserves the right to revise
the AVL at any time during the project life cycle (i.e. Bidding stage, contract award, project
execution, commissioning and final close out), in order to cater for local procurement. Moreover, the
Company’s Qualification Division is the only body authorized to revise the AVL as per Company’s
internal policies and procedures.

Wednesday, March 11, 2020 Page 2 of 304

Main Category Air Compressor

Sub Category AIR COMPRESSORS

No Contractor Name Location Limitations/Conditions

5025 COMPARE DRUCKLUFlTECHNIK GMBH USA / Germany

11454 Cameron Compression Systems USA No Limitation

11844 Airpack Netherland B.V. Netherlands - Limitations:- For Generartion

Engineering & Projects Sector.

- Condition :- To use SEC Approved

Vendor List OEMs of Equipments.

5219 ATLAS COPCO Antwerp, Belgium

5220 INGERSOLL RAND USA

5222 SULLAIR USA

Wednesday, March 11, 2020 Page 3 of 304

5224 COOPER/JOY INDUSTRIES USA

5227 AERZEN NSA CORP. USA

5228 SUNDYNE COMPRESSORS USA

5229 KAWASAKI HEAVY IND. LTD. Japan

5230 AC COMPRESSOR USA

5232 UNIVERSAL COMPRESSION USA

9831 Sinergia SRL Italy

Wednesday, March 11, 2020 Page 4 of 304

5225 DRESSER RAND Singapore

Main Category Ash Handling System

Sub Category Ash Handling System

No Contractor Name Location Limitations/Conditions

9315 KC Cottrell Korea

9314 NOL-TEC USA

9406 Lodge Cottrell Limited United Kingdom

Main Category Auxiliary Boiler

Sub Category AUXILIARY BOILER

No Contractor Name Location Limitations/Conditions

5152 NEBRASKA Country of origin is
subject to SEC
approval

Wednesday, March 11, 2020 Page 5 of 304

5151 BABCOCK & WILCOX USA

Main Category Bar Screen

Sub Category Bar Screen Grab

No Contractor Name Location Limitations/Conditions

9758 Hyorim Industries Inc. Korea Model : Rake Trash Rake
Channel Width 1 - 6 meter ,Bar Pitch
40 - 150 mm
Traversing speed 9 m/min Design
Hoisting Capacity 2000 kg Debris
Hopper Capacity 2m³

10935 E. BEAUDREY & Cie France

Sub Category Bar Screen Gripper

No Contractor Name Location Limitations/Conditions

9759 Hyorim Industries Inc. Korea Model: Rake and Monorail
Channel Width 1 - 6 m , Bar Pitch 40 -
150 mm
Grab Width 1.2 - 2.5 m
Design Hoisting Capacity 500 - 3000 kg

Wednesday, March 11, 2020 Page 6 of 304

11853 E. BEAUDREY & Cie France

Sub Category Rotary bar screen

No Contractor Name Location Limitations/Conditions

9761 Hyorim Industries Inc. Korea Channel Width: 1.5 - 4.5 m , Bar Pitch:
10 - 150 mm
Pitch of carrying chain: 250 mm

11854 E. BEAUDREY & Cie France

Sub Category SEA WATER TRAVELLING BAND SCREEN

No Contractor Name Location Limitations/Conditions

8738 Hyorim Industries Inc. Korea Channel width : 1.5 - 7 m , Mesh size :
1.0 - 10 mm
Capacity: 45,000 m³/h.
Channel depths of up to: 15 m
Design :Centre Flow ,Inline Flow, Dual
Flow

5184 PERRIER SEREM France

Wednesday, March 11, 2020 Page 7 of 304

5183 OVIVO (BRACKETT GREEN) United Kingdom

5182 FAI OFFICINE Italy

5181 E. BEAUDREY France

5180 GEIGER Germany

8973 HUBERT STAVOREN B.V. Netherlands Channel Width : up to 4 m , Capacity:

45,000 m³/h.
Channel depths of up to: 15 m
Design :Centre Flow (CF) ,Inline Flow
(IF),Dual Flow (DF)

Main Category Battery Charger/UPS/Power supply system

Sub Category BATTERY CHARGER

No Contractor Name Location Limitations/Conditions

6897 COM 10 INTERNATIONAL PTY. LTD. Australia

Wednesday, March 11, 2020 Page 8 of 304

11085 Statron AG Switzerland

8710 JEMA Energy S.A Spain -(10) Years Extended

guarantee/warranty certificate.

6909 THEO-BENNING Germany

6908 SOLID- STATE CONTROLS INC. USA

6907 CONSTANT POWER MANUFACTURING CO. USA

6906 GUTOR ELECTRONICS LTD. Switzerland

6905 ERSKINE United Kingdom

Wednesday, March 11, 2020 Page 9 of 304

6903 EMISA (ELECTRO MERCANTIL INDUSTRIAL Spain
S.A. SPAIN)

6861 EXIDE TECHNOLOGIES USA

6899 AEES France

6894 SAFT AB Oskarhamn,

Sweden

6887 Emerson Network Power Industrial France

Systems

6881 AEG Power Solutions France

6847 Thomas & Betts Power Solutions, LLC USA

Wednesday, March 11, 2020 Page 10 of 304

6857 C&D USA

6901 BENNING Germany

Sub Category Battery Charger/Rectifier

No Contractor Name Location Limitations/Conditions

8961 CEG Elettronica Industriale S.p.a Italy 1-Battery Charger/Rectifier Model UBC
Series.2. All parts & components shall
be procured from CEG group-Italy
manufactured. 3. Ten years extended
warranty shall be applicable to:- All
supplies directly or through supplier.-
Design defects & manufactur

8968 BORRI S.P.A Italy -Battery Charger / Rectifier Model RTB.e

-Extend warranty shall be applicable to
all supplies dirctly or thrugh supplier.
-Ten (10) years warranty shall be
applicable for first project and reduced
yearly for subsequent project awards.

10415 JEMA Energy S.A Spain -(10) Years Extended

guarantee/warranty certificate.

Wednesday, March 11, 2020 Page 11 of 304

11300 ARABIA POWER ELECTRONICS COMPANY Saudi Arabia Conditions:
(APEC) Only assembly. However, the
components
shall be from West Europe or North
America.
- Up to120 A DC only.
- Natural cooling system.

9329 HBL Power Systems Ltd, India Battery Charger/Rectifier

Sub Category BATTERY CHARGER: BATTERY CHARGER, 48 VDC

No Contractor Name Location Limitations/Conditions

6898 COM 10 INTERNATIONAL PTY. LTD. Australia

6912 T.D.I USA

6911 HAMMER & SIMMONS United Kingdom

6910 BRAGA MORO Italy

Wednesday, March 11, 2020 Page 12 of 304

6904 EMISA (ELECTRO MERCANTIL INDUSTRIAL Spain
S.A. SPAIN)

6900 AEES France

6888 Emerson Network Power Industrial France

Systems

6882 AEG Power Solutions France

6862 EXIDE TECHNOLOGIES USA

6902 BENNING France

Sub Category MODULAR PHOTOVOLTAIC POWER SUPPLY SYSTEMS

No Contractor Name Location Limitations/Conditions

7456 NEST OY/NAPS FINLAND

Wednesday, March 11, 2020 Page 13 of 304

 Sub Category UNINTERRUPTIBLE POWER SUPPLY SYSTEM (UPS)

No Contractor Name Location Limitations/Conditions

6848 Thomas & Betts Power Solutions, LLC USA

11891 Statron AG Switzerland

10416 JEMA Energy S.A Spain -(10) Years Extended

guarantee/warranty certificate.

10352 ARABIA POWER ELECTRONICS COMPANY Saudi Arabia Conditions:

(APEC) Only assembly. However, the
components
shall be from West Europe or North
America.
- Up to 30 KVA only.
- Natural cooling system.

9829 BORRI S.P.A Italy - UPS Model E 2011e

-Extend warranty shall be applicable to
all supplies dirctly or thrugh supplier.
-Ten (10) years warranty shall be
applicable for first project and reduced
yearly for subsequent project awards.

Wednesday, March 11, 2020 Page 14 of 304

9407 CEG Elettronica Industriale S.p.a Italy 1. UPS Model AC U1 / AC U3
Series.Series.2. All parts &
components shall be procured from CEG
group-Italy manufactured. 3. Ten years
extended warranty shall be applicable
to:- All supplies directly or through
supplier.- Design defects &
manufacturing

6915 Emerson Network Power Industrial France

Systems

6914 AEG Power Solutions Germany

6913 SOLID-STATE CONTROLS INC. (AMETEK) USA

6852 POWERWARE USA

6850 GUTOR ELECTRONICS LTD. Switzerland

Main Category Boiler

Wednesday, March 11, 2020 Page 15 of 304

 Sub Category BOILER MANUFACTURERS

No Contractor Name Location Limitations/Conditions

10212 ALSTOM POWER Stuttgart &
Neumark,
Germany/
Chattanooga, USA

166 Ansaldo Caldaie S.p.A Italy

5105 Mitsubishi Hitachi Power Systems (MHPS) Japan

6555 BABCOCK & WILCOX USA

6556 Sumitomo SHI FW Clinton NJ, USA

8686 IHI Japan

Wednesday, March 11, 2020 Page 16 of 304

11864 CERREY, S.A. DE C.V.stf Mexico Subcritical up350 MW
Condition: Engoneering and design must
be approved by Alstom

6557 DOOSAN HEAVY INDUSTRIES AND Korea

CONSTRUCTION CO. LTD.

Sub Category BOILER DRUM

No Contractor Name Location Limitations/Conditions

6445 B&W Canada

9705 ZAMIL STEEL INDUSTRIES PED Saudi Arabia For HRSG applications for combined
cycle

8678 ULP Co. Ltd. Korea 1-Manufacturing in Korea.2- ULP Co

Ltd Issue Inspection and Test Plan
Detailing all of the Manufacturing and
Test Activities and Approval by SEC Prior
to the Start of Manufacture.

Wednesday, March 11, 2020 Page 17 of 304

10076 GS Entec Corp. Korea •All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
•Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
•All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
•All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

8679 Kangrim Heavy Industries Co. Ltd. Korea Manufacturing in Korea

11279 Posco plantec Korea

8947 Daechang HRSG Corporation Korea •All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
•All sizes and wall thickness up to 110
mm
•Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
•All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
•All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

Wednesday, March 11, 2020 Page 18 of 304

10081 S&T Corporation Korea •Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
•All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
•All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

11029 Unimit Engineering Thailand

11305 AL ZAMIL HEAVY INDUSTRIES LIMITED Saudi Arabia - Design pressure: 97 bar, diameter:
2083mm, length: 11,582 mm, thickness
81mm (which corresponds to ASME
VIII Div 1 & 2 pressure vesseis 60 mm
thick and above)

11932 SEWON CELLONTECH Korea As a fabrication shop only.

Sub Category BOILER FABRICATION SHOPS

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 19 of 304

9887 Yantai Hyundai Heavy Industries Co.Ltd China -As fabrication shop only for the
following
components:(Headers,Superheaters,Reh
eaters,Economizer and Vertical Walls)
-All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
-Componets to be fabricated following
ASME procedures and shall bear ASME
stamp.
-All sourced materials shall be as per
ASME,ASTM,DIN,BS or JIS
-All materials above grade 22 shall be
sourced only from West Europe USA or
Japan.

4838 ALSTOM POWER SRO Czech Republic -As a fabrication shop only for BOILER
PRESSURE PARTS
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Wednesday, March 11, 2020 Page 20 of 304

8689 DOOSAN HEAVY INDUSTRIES AND Danang, Vietnam - All Engineering and Design work must
CONSTRUCTION CO. LTD. be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

9271 WUHAN BOILER COMPANY, ALSTOM Wuhan, China - All engineering and design activities to
be done at ALSTOM Windsor, USA
(Formerly Combustion Engineering)
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Wednesday, March 11, 2020 Page 21 of 304

9524 Sumitomo SHI FW China - As fabrication shop only for the
following components: (Headers,
Superheaters, Reheaters, Economizer
and Vertical Walls)
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
- All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

9842 BABCOCK & WILCOX BEIJING CO. LTD China - Components to be fabricated following
(BWBC) ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Wednesday, March 11, 2020 Page 22 of 304

9855 MHPS (Philippines) Inc. Philippine -As a fabrication shop only for BOILER
PRESSURE PARTS
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

10563 Foster Wheeler Poland - All engineering and design must be

done by approved OEM.
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Wednesday, March 11, 2020 Page 23 of 304

10581 IHI PT. CILEGON FABRICATORS (IHI CILEGON Only for (1) Header with material SA106,
Corporation) ,INDONESIA SA335, P12 & P22 and (2)Furnace
Vertical wall panel with material SA210
- All engineering and design must be
done by approved OEM.
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Sub Category BOILER STRUCTURAL STEEL

No Contractor Name Location Limitations/Conditions

12025 Posco plantec Korea

11088 Zamil Structural Steel Co Saudi Arabia - Only as fabrication shop

- In case of contract award the vendor
shall
assign an approved NDT third party
body to SEC for inspection in addition to
project's requirements.

8433 Energya Steel Solutions Saudi Arabia

Wednesday, March 11, 2020 Page 24 of 304

8332 GULF STEEL WORKS Saudi Arabia

4903 ARABIAN INTERNATIONAL CO. (AIC) Saudi Arabia

4902 AL ZAMIL HEAVY INDUSTRIES Saudi Arabia

4898 HIDADA LTD. Saudi Arabia

11700 ARABIAN INTERNATIONAL CO. (AIC) United Arab

Emirates

Sub Category FIRED HEATERS: BOX TYPE FURNACE

No Contractor Name Location Limitations/Conditions

4992 NIIGATA ENGINEERING CO., LTD. Japan

4907 Sumitomo SHI FW SORSICA, IT

Wednesday, March 11, 2020 Page 25 of 304

4994 COOPERHEAT UK, LTD. United Kingdom

4884 KOREA HEAVY INDUSTRIES AND KYUNGYAM, KR

CONSTRUCTION

4768 Mitsubishi Hitachi Power Systems (MHPS) Japan

4995 SITICEM MONTAGGI-E MANUTENZIONI PISA, IT

SPA

Sub Category FIRED HEATERS: DIRECT FIRE FURNACE

No Contractor Name Location Limitations/Conditions

4908 G.C. BROACH COMPANY USA

4762 Mitsubishi Hitachi Power Systems (MHPS) Japan

4905 Sumitomo SHI FW Italy

Wednesday, March 11, 2020 Page 26 of 304

4910 TAKAHASHI IRON WORKS CO., LTD. Japan

4881 KOREA HEAVY INDUSTRIES AND KYUNGYAM, KR

CONSTRUCTION

Sub Category FIRED HEATERS: FURNACE, INDIRECT FIRED

No Contractor Name Location Limitations/Conditions

4763 Mitsubishi Hitachi Power Systems (MHPS) Japan

4825 KCC PROCESS EQUIPMENT, LTD. SUNBVRY-ON-

THAMES

4882 KOREA HEAVY INDUSTRIES AND KYUNGYAM, KR

CONSTRUCTION

4906 Sumitomo SHI FW Italy

Wednesday, March 11, 2020 Page 27 of 304

4909 G.C. BROACH COMPANY USA

Sub Category INDUSTRIAL BOILERS: FIRE TUBE BOILER AND COMPONENTS

No Contractor Name Location Limitations/Conditions

4679 SANTAZ-CENSA S.A. PORRINO-
PONTEVEDRA, ES

4742 AALBORG CISERV INTERNATIONAL A/S Germany

4832 TECHNOTHERM CORPORATION USA

4868 BILFAL Heavy Industries Ltd Saudi Arabia

4873 WELLMAN ROBEY, LTD. United Kingdom

4875 MITSUI BABCOCK RENFREW

Wednesday, March 11, 2020 Page 28 of 304

4880 KOREA HEAVY INDUSTRIES AND KYUNGYAM, KR
CONSTRUCTION

4887 MITSUI SHIPBUILDING Japan

Sub Category INDUSTRIAL BOILERS: PORTABLE AND MOBILE BOILERS

No Contractor Name Location Limitations/Conditions

4877 MITSUI BABCOCK United Kingdom

Sub Category INDUSTRIAL BOILERS: WATER TUBE BOILER

No Contractor Name Location Limitations/Conditions

4869 BILFAL Heavy Industries Ltd Saudi Arabia

4874 WELLMAN ROBEY, LTD. United Kingdom

4876 MITSUI BABCOCK RENFREW

Wednesday, March 11, 2020 Page 29 of 304

4888 MITSUI SHIPBUILDING Japan

4889 ABB ALSTOM POWER KASSEL, DE

4891 STORK ENERGY Netherlands

4892 CERREY, S.A. DE C.V. MON TEXRENY, MX

4833 TECHNOTHERM CORPORATION USA

4761 Mitsubishi Hitachi Power Systems (MHPS) Japan

4743 AALBORG CISERV INTERNATIONAL A/S Germany

Wednesday, March 11, 2020 Page 30 of 304

4893 KOREA HEAVY INDUSTRIES AND KYUNGYAM, KR
CONSTRUCTION

4713 KAWASAKI HEAVY IND., LTD. Japan

Sub Category STEAM CONDITIONING VALVE (ATTEMPORATORS) - CONTROL VALVES;

DESUPERHEATING
No Contractor Name Location Limitations/Conditions
5283 EMERSON/FISHER-ROSEMOUNT CON-TEK Country of origin is
subject to SEC
approval

10147 Nihon Koso Co. Japan

11938 CCI Valves Korea

6425 DRESSER AL-RUSHAID Saudi Arabia

Wednesday, March 11, 2020 Page 31 of 304

6430 FISHER CONTROLS INC USA

5128 CCI USA, Switzerland,

Sweden, Austria

Main Category Boiler Air Preheater

Sub Category BOILER- REGENERATIVE AIR HEATERS

No Contractor Name Location Limitations/Conditions

6471 HOWDEN POWER United Kingdom

5071 ALSTOM France

6528 Mitsubishi Hitachi Power Systems (MHPS) Japan

6532 ALSTOM APER GMBH Germany

Wednesday, March 11, 2020 Page 32 of 304

10861 Burmeister & Wain Energy A/S (BWE),STF Denmark All Sub vendors for the main parts shall
be approved by SEC.

6531 ALSTOM AIR PREHEADER USA

Main Category Boiler Circulating Pumps

Sub Category BOILER CIRCULATING WATER PUMPS

No Contractor Name Location Limitations/Conditions

10669 TORISHIMA PUMPS mfg. Co. Ltd. Japan

5168 HAYWARD TYLER UK United Kingdom

5123 KSB Germany

11956 Young Poong Precision Corporation Korea - Capacity up to : 4000 m3/hr.

Wednesday, March 11, 2020 Page 33 of 304

11981 Ensival Moret (em-pumps) Belgium

Main Category Boiler Feed Pumps

Sub Category BOILER FEED PUMPS AND MOTORS for Combined Cycle Power Plant

No Contractor Name Location Limitations/Conditions

11980 Ensival Moret (em-pumps) Belgium

5088 FLOWSERVE France, United

Kingdom & Austria

8439 Flowserve- Coslada Spain Modeles (WXH,CSB,CHTA/DSB,DMX)

8406 Hyundai Heavy Industries co., LTD. Korea Model HMR, max flow 700 m3/hr Total
head ~ 1800 meters.

5100 HITACHI Japan

Wednesday, March 11, 2020 Page 34 of 304

8736 TORISHIMA PUMPS mfg. Co. Ltd. Japan

5095 EBARA Japan

9529 Hyosung GoodSprings, Inc.(HGS) Korea

5084 SULZER PUMPS Germany / United

Kingdom / France

5083 KSB, INC Germany

10372 sterling SIHI S . A . S Germany Pressure level less than 220 Bar

9768 TERMOMECCANICA Italy Models (MES,MESB,D2D or PF )

Wednesday, March 11, 2020 Page 35 of 304

11625 GE Nuovo Pignone SPA Italy

5049 MITSUBISHI Japan

12019 Sulzer Saudi Pump Company LLC Saudi Arabia - Assembly shop only.
- Capacity up to 3MW

11307 CLYDE UNION PUMPS United Kingdom

Sub Category BOILER FEED PUMPS AND MOTORS for Steam Power Plant

No Contractor Name Location Limitations/Conditions

9987 MITSUBISHI Japan

9989 HITACHI Japan

9991 Flowserve- Coslada Spain Modeles (WXH,CSB,CHTA/DSB,DMX)

Wednesday, March 11, 2020 Page 36 of 304

9993 TERMOMECCANICA Italy Models (MES,MESB,D2D or PF )

10788 TORISHIMA PUMPS mfg. Co. Ltd. Japan

9986 FLOWSERVE France, United

Kingdom & Austria

10371 sterling SIHI S . A . S Germany Pressure level less than 220 Bar

9988 EBARA Japan

9984 KSB, INC Germany

9882 CLYDE UNION PUMPS United Kingdom

Wednesday, March 11, 2020 Page 37 of 304

11242 Hyosung GoodSprings, Inc.(HGS) Korea

9985 SULZER PUMPS Germany / United

Kingdom / France

Main Category Bus Ducts

Sub Category BUSDUCT, METAL-ENCLOSED

No Contractor Name Location Limitations/Conditions

6571 WESCOSA Saudi Arabia

Sub Category ISOLATED PHASE BUS DUCT

No Contractor Name Location Limitations/Conditions

9327 EGE Ltd. Czech Republic / Up to 25 KA for 36 KV at 50C and natural
Slovakia cooling system only

10611 Technibus United States UP to 15 KA, 19 KV.

Wednesday, March 11, 2020 Page 38 of 304

8855 AZZ - CALVERT USA

8859 ALSTOM France None

9038 ABB Country of origin is Country of origin is subject to SEC

subject to SEC approval
approval

9197 Simelectro France Model Powerduct IPB Series

9245 Elektrobudowa Poland Model Type ELPE with 5 years warranty.

9041 GE Canada None

9326 Alfa Standard Italy Up to 20KA for 36KV at 50°C

Wednesday, March 11, 2020 Page 39 of 304

9042 HITACHI Country of origin is Country of origin is subject to SEC
subject to SEC approval
approval

9043 ALSTOM France None

9040 Powell Electrical Systems, Inc. - USA, Northlake, IL Country of origin is subject to SEC
Delta/Unibus Div approval

Sub Category NON SEGREGATED MV BUS DUCT

No Contractor Name Location Limitations/Conditions

9049 MGC MOSER-GLASER France None

9048 ETA (BETOBAR) FRANCE, BELGIUM None

Sub Category NON SEGREGATED PHASE BUS DUCT

No Contractor Name Location Limitations/Conditions

10132 Alfa Standard Italy Up to 3.5KA for 17.5KV at 50°C

Wednesday, March 11, 2020 Page 40 of 304

8861 SQUARE D USA Country of origin is subject to SEC
approval

10133 EGE Ltd. Czech Republic / Up to 4.0KA for 1000V at 50°C

Slovakia

9517 Simelectro France Model Transoduct NSPB Series LV

9046 Powell Electrical Systems, Inc. - USA, Northlake, IL Country of origin is subject to SEC
Delta/Unibus Di approval

12046 Technibus United States UP to 4 KA, 480 V.

8863 POWELL Country of origin is Country of origin is subject to SEC

subject to SEC approval
approval

8860 AZZ / CALVERT USA

Wednesday, March 11, 2020 Page 41 of 304

 Sub Category Segregated Phase Bus Ducts

No Contractor Name Location Limitations/Conditions

9518 Simelectro France Model Transoduct SPB Series (MV,LV)

10131 Alfa Standard Italy Up to 4.0KA for 1000V at 50°C

10134 EGE Ltd. Czech Republic / Up to 3.5KA for 17.5KV at 50°C

Slovakia

10410 AZZ / CALVERT USA

12047 Technibus United States UP to 3 KA, 15 KV.

Main Category Cables & Cabling Accessories

Sub Category 110KV HV CABLES

No Contractor Name Location Limitations/Conditions

6982 SAUDI CABLE Saudi Arabia

Wednesday, March 11, 2020 Page 42 of 304

6980 RIYADH CABLE Saudi Arabia

6984 FUJIKURA Japan

6489 ABB Germany

Sub Category 400KV HV CABLES

No Contractor Name Location Limitations/Conditions

6490 ABB Germany

6985 FUJIKURA Japan

Sub Category CABLE, POWER, 69 KV THROUGH 132KV

No Contractor Name Location Limitations/Conditions

6999 ALCATEL KABLE AG & CO. (NEXANS) Germany

Wednesday, March 11, 2020 Page 43 of 304

7002 SAUDI MODERN CO. FOR METAL CABLES & Saudi Arabia
PLASTIC IND.,

7001 HITACHI CABLE LTD. Japan

7000 FUJIKURA Japan

6991 FURUKAWA ELECTRIC CO. LTD. Japan

636 Saudi Vompany for Cables ind.ltd Saudi Arabia

6998 SAUDI CABLE COMPANY Saudi Arabia

Sub Category LPOF CABLE –380 KV

No Contractor Name Location Limitations/Conditions

7104 PIRELLI Italy

Wednesday, March 11, 2020 Page 44 of 304

6652 SIEMENS Germany

6957 TAIHAN ELECTRIC WIRE COMPANY Korea

7092 FUJIKURA Japan

7021 DAINICHI-NIPPON CABLES (MITSUBISHI) Japan

7039 J-POWER SYSTEM CORP. Japan

7051 SHOWA CABLE Japan

7067 FURUKAWA ELECTRIC CO. LTD. Japan

Wednesday, March 11, 2020 Page 45 of 304

7117 CANADA WIRE Canada

7122 KABEL RHEYDT (AEG) Germany

7126 LS Cable and Systems Ltd. Korea

7133 HITACHI CABLE LTD. Japan

7135 MITSUBISHI CABLE INDUSTRIES LTD Japan

7139 STANDARD TELEFON OG KABELFABRIK A/S Norway

7055 ALCATEL France

Sub Category XLPE CABLE – 230 K V

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 46 of 304

7035 J-POWER SYSTEM CORP. Japan

7064 FURUKAWA ELECTRIC CO. LTD. Japan

7027 DEMIRER KABLO/SAUDI CABLE CO. Saudi Arabia

7073 NEXANS NORWAY AS Norway

6953 TAIHAN ELECTRIC WIRE COMPANY Korea

7084 BRUGG TELECOM AG Switzerland

6493 ABB Germany

Wednesday, March 11, 2020 Page 47 of 304

7017 DAINICHI-NIPPON CABLES (MITSUBISHI) Japan

7006 LS Cable and Systems Ltd. Korea

7089 FUJIKURA Japan

Sub Category XLPE CABLE -380 KV

No Contractor Name Location Limitations/Conditions

7100 NKT Germany

7112 VISCAS FUJIKURA Japan

7018 DAINICHI-NIPPON CABLES (MITSUBISHI) Japan

7085 BRUGG TELECOM AG Switzerland

Wednesday, March 11, 2020 Page 48 of 304

6954 TAIHAN ELECTRIC WIRE COMPANY Korea

6494 ABB Germany

7096 NEXANS NORWAY AS Norway

7007 LS Cable and Systems Ltd. Korea

7036 J-POWER SYSTEM CORP. Japan

Sub Category XLPE CABLES – 110 TO 132 KV

No Contractor Name Location Limitations/Conditions

7083 BRUGG TELECOM AG Switzerland

7072 NEXANS NORWAY AS Norway

Wednesday, March 11, 2020 Page 49 of 304

7063 FURUKAWA ELECTRIC CO. LTD. Japan

7026 DEMIRER KABLO/SAUDI CABLE CO. Saudi Arabia

7034 J-POWER SYSTEM CORP. Japan

6492 ABB Germany

6934 RIYADH CABLES Saudi Arabia

6952 TAIHAN ELECTRIC WIRE COMPANY Korea

7088 FUJIKURA Japan

Wednesday, March 11, 2020 Page 50 of 304

7005 LS Cable and Systems Ltd. Korea

7016 DAINICHI-NIPPON CABLES (MITSUBISHI) Japan

7059 DRAKA NK FINLAND

6943 SAUDI CABLE Saudi Arabia

Main Category CHIMNEY STACK & LINERS

Sub Category CHIMNEY STACK & LINERS

No Contractor Name Location Limitations/Conditions

8706 TechTowers for Power & Telecom,Aarding Netherlands Only for Gas Turbines
Thermal Aco

12017 Arabian International Co. (AIC) Saudi Arabia ,Asfan None

Wednesday, March 11, 2020 Page 51 of 304

11247 Compact Power Plant Product Gmbh Austria - UP to F-class.

10463 BEMCO Steel Industries (BSI) Saudi Arabia For simple & Combined cycle Power
Plants

10288 Nem Power System Germany

9171 Chimneys and Refractories International Italy

(CRI) - BE

8655 BRADEN Europe B.V Netherlands For Gas Turbine and HRSG only

8418 HADEK (Protective Pennguard Block) Netherlands For the Plants with : FGD and with
Low Temperature Flue Gas Temperature

8413 Balanced Engineering Construction BEC Singapore

Wednesday, March 11, 2020 Page 52 of 304

8150 SAUDI METAL COATING CO. Saudi Arabia

8083 MARIANI BATTISTA ARABIA Saudi Arabia

10280 ENPRO Turkey gas turbine exhust system bypass &

main include diffuser ,ductwork
,diverter , silincer, expansion joint ,stack
and supporting structure.
2.fabrication shall be done in local
approval shops.

Main Category Circulationg Water Pumps

Sub Category MAIN SEAWATER CIRCULATING WATER PUMPS

No Contractor Name Location Limitations/Conditions

9160 Hyosung GoodSprings, Inc.(HGS) Korea

5165 TORISHIMA PUMPS Japan

5051 MITSUBISHI Japan

Wednesday, March 11, 2020 Page 53 of 304

8945 KUBOTA Japan Flow (m3/h): 60,000
Head (m) : 22
Motor rating (kw) : 3,900

5166 INGERSOLL RAND PUMPS USA

5162 Sulzer Pumps USA

5157 TERMOMECCANICA Italy

5155 GOULDS PUMPS USA

9389 Hyundai Heavy Industries co., LTD. Korea Model VKNM, flow 73,000 m3/h, Total
Head 23 meters.

5097 EBARA Japan

Wednesday, March 11, 2020 Page 54 of 304

5091 FLOWSERVE Spain/Italy

9995 DMW Japan -Model:VPF

-Rate 1600m3/min
-Head:32 m

10050 HITACHI Japan

5087 SULZER PUMPS Germany / United

Kingdom / USA

5122 KSB Germany

5167 WORTHINGTON PUMPS Country of origin is

subject to SEC
approval

Main Category COMPOSITE OPTICAL OH GROUND WIRE (OPGW)

Sub Category COMPOSITE OPTICAL OH GROUND WIRE (OPGW)

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 55 of 304

7061 DRAKA NK FINLAND

7095 FUJIKURA Japan

7110 PIRELLI Italy

7155 ALCOA FUJIKURA LTD (AFL) United Kingdom

7159 BRUGG TELECOM AG Switzerland

7175 PRYSMIAN TELECOM Spain

7312 CORNING CABLES United Kingdom

Wednesday, March 11, 2020 Page 56 of 304

7070 FURUKAWA ELECTRIC CO. LTD. Japan

7313 PHILLIPS FITEL Canada

Main Category Consultancy Office

Sub Category Energy Storge Technology

No Contractor Name Location Limitations/Conditions

12127 Advanced Electronics Company AEC Saudi Arabia - Condition :- For IPP & Renewable
Energy Projects.

Limitation:- Rated output power :0.5

MVA up to 3.3 MVA.

Main Category CONTROL ROOM FURNITURE

Sub Category DCS CONTROL DESK

No Contractor Name Location Limitations/Conditions

10815 Lund Halsey United Kingdom

8042 ENVAS USA

Wednesday, March 11, 2020 Page 57 of 304

8041 IMAGE VISION USA

8035 EMERSON USA

Main Category CONTROL SYSTEMS

Sub Category Control Systems

No Contractor Name Location Limitations/Conditions

9911 Wunderlich – Malec Engineering, USA System integration and fabrication of
Inc./Dacang Co Relay and Control Panels.
-Protection Relays and Control Relays
shall be provided from SEC Approved
Vendors List.

10177 Invensys operation Management United Kingdom

(Eurotherm Schneider

Main Category Cranes-Hoists-Monorail

Sub Category BRIDGE CRANES / HOISTS / MONORAILS

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 58 of 304

6292 ITALKRANE Italy

9850 Prime Source Group Saudi Arabia Manufacturing of Bridge Grider (SWL up
to 60 ton, spans up to 30 m).
Condition: Caranes components must be
from (USA, Europ, Japan)

9281 Ace Crane Systems LLC UAE -Up to 100 Ton

-For non-hazard area
-All equipments shall be from Abus
(Germany).

8653 DEMAG CRANES & COMPONENTS Saudi Arabia -Manufacturing of Bridge Girder (SWL up
to 50 t, spans up to 30 m).
-Components must be from Demag
Germany.

6298 ABUS Germany

6295 AL-ZAMIL HEAVY INDUSTRIES Saudi Arabia

Wednesday, March 11, 2020 Page 59 of 304

6294 Kone Saudi Arabia

6293 SAUDI CRANE Saudi Arabia

Main Category DCS

Sub Category CONTROLLERS – FIELD

No Contractor Name Location Limitations/Conditions

8005 EMERSON-FISHER CONTROLS CO. USA

7631 FOXBORO COMPANY (INVENSYS) USA

8002 RONAN ENGINEERING CO. United Kingdom

Sub Category DISTRIBUTED CONTROL SYSTEM

No Contractor Name Location Limitations/Conditions

5067 SIEMENS Germany

Wednesday, March 11, 2020 Page 60 of 304

12298 ABB AUTOMATION Riyadh Saudi Arabia

8917 YOKOGAWA ELECTRIC CORP Japan

8913 HONEYWELL, INC. USA

8034 EMERSON USA

6523 ABB USA /SWEDEN /

GERMANY

5047 GE USA

5076 ALSTOM France

Wednesday, March 11, 2020 Page 61 of 304

5055 Mitsubishi Hitachi Power Systems (MHPS) Japan

8974 Yokogawa-Saudi Arabia Saudi Arabia 1. DCS: Models CENTUM- VP.2. All
equipment, instruments & components
(Controllers, I/O cards, Processors,
Communication cards, power supplies
etc) shall be from Yokogawa factory-
Singapore or japan .3. All Panels &
Marshalling Cabinets shall be procured
from M/s. RITAL-Germany.

9926 Yokogawa Electric Asia Pte.Ltd.Singapore Singapore

9820 Invensys Saudi Arabia Co Ltd. Saudi Arabia FOXBORO DCS model IIA Series V8.5&
8.6
- All equipment, Instruments &
components
(Controllers, 110 Cards, Processors,
Communication cards, Power Supplies
etc,)
shall be from FOXBORO-USA.
- All Panels & Marshalling Cabinets shall
be
procured from MIS RITAL- Germany.

12268 ABB AUTOMATION Riyadh Saudi Arabia

Wednesday, March 11, 2020 Page 62 of 304

Main Category DG sets & Motors

Sub Category BLACK START GENERATOR SETS

No Contractor Name Location Limitations/Conditions

8071 CATERPILLAR USA

6526 Mitsubishi Hitachi Power Systems (MHPS) Japan

8072 CUMMINS USA

Sub Category FORM-WOUND BRUSHLESS SYNCHRONOUS MOTORS

No Contractor Name Location Limitations/Conditions

11055 NIDEC Ansaldo Sistemi Industriali S.P.A Italy

6552 GENERAL ELECTRIC PETERBOROUGH,

ON, CANADA

6542 SIEMENS Germany

Wednesday, March 11, 2020 Page 63 of 304

5074 GE Energy Power Conversion NANCY, FRANCE

Sub Category FORM-WOUND INDUCTION MOTORS: 250 HP AND ABOVE

No Contractor Name Location Limitations/Conditions

6737 LAURENCE, SCOTT & ELECTROMOTORS UK United Kingdom

6740 TMA ELECTRIC CORP. EAST Japan

5073 GE Energy Power Conversion NANCY, FRANCE

6569 SIEMENS ENERGY AND AUTOMATION USA

11397 ABB S.p.A Milano/Italy Medium Voltage - Up to 17MW.

Flame Proof motor exd limit 7MW.

6741 Ansaldo Sistemi Industriali S.p.A Italy

Wednesday, March 11, 2020 Page 64 of 304

6739 TMA ELECTRIC CORP. WEST Japan

6738 TECO - WESTINGHOUSE USA

6736 Hyundai Electric & Energy Systems Co.,Ltd. Korea Non-explosion proof (170064 and
170065) only and 8,000 HP maximum

6551 GENERAL ELECTRIC CAMPINAS, BRAZIL

6474 ABB VASTERAS, SWEDEN

6541 SIEMENS Germany

11326 TECO Middle East Electrical & Machinery Saudi Arabia -Voltage level Up to 6.6 KV.
Co. Ltd., -Motor size Up to 900HP
*Conditions:
-One Motor of each type supplied to SEC
Projects, shall be type tested once.

Wednesday, March 11, 2020 Page 65 of 304

 Sub Category MOTORS: UP TO 250 HP

No Contractor Name Location Limitations/Conditions

5053 Mitsubishi Hitachi Power Systems (MHPS) Japan

6734 U.S ELECTRIC USA

11268 WEG Equipamentos Electricos S. A Brazil Up to 250 hp.

9291 TECO Middle East Electrical & Machinery Saudi Arabia -Low Voltage
Co.

6735 BROOK HANSEN (INVENSYS BROOK United Kingdom

CROMPTON)

6733 RELIANCE USA

6732 BARLDOR ELECTRIC MOTORS USA

Wednesday, March 11, 2020 Page 66 of 304

6731 TECO - WESTINGHOUSE USA

5060 SIEMENS MORELIA

(GUADALAJARA),
MEXICO

6724 TOSHIBA USA

Sub Category MV/LV ELECTRICAL MOTORS

No Contractor Name Location Limitations/Conditions

6742 TMAE (MV MOTORS) Japan

11593 Baldor - Kings Mountain, NC (ABB) United States -MV Up to 2000HP.

- MV Up to 4.16KV.
- LV Up to 250HP.

6744 GE Power Conversion FRANCE, BELGIUM,

United Kingdom

Wednesday, March 11, 2020 Page 67 of 304

8409 Hyosung Corporation Korea 1-Up to 5000KW ,13.8 KV2-Up to
9,000KW , 11KV

8446 Hyundai Electric & Energy Systems Co.,Ltd. Korea -Up to 7.5 MW-Model HRQ3 series &
Model HRN3 series.-From Korea
Factory Only

8632 SCHORCH Elektrische Machinen Germany 1-MV Motor:Up to 5 MWModel

KA,KR & KW2-LV Motors:-Up to 200
KW-Model DA

11101 Hyundai Electric & Energy Systems Co.,Ltd. Korea 1)LIMITATIONS:

- Model HRN3 up to 16MW
- Model HRQ3 up to 7.5MW
CONDITIONS:
- No Condition.
2)LIMITATIONS:
- Model HLE5 less than 1MW
- Model HLE6 less than 1MW
CONDIDIONS:
- One motor of each type supplied to
SEC projects shall be type tested.
- 10 years extended warrantee.

11596 Baldor - Athens, GA (ABB) United States - Up to 250HP.

Wednesday, March 11, 2020 Page 68 of 304

11597 Baldor - Columbus (ABB) United States - LV Up to 150HP.

11598 Baldor - Ozark, AR (ABB) United States -LV Up to 30HP.

11890 WEG Equipamentos Electricos S. A Brazil Medium Voltage Motors ,Up to 23 MW.

11893 ABB S.p.A Milano/Italy Medium Voltage - Up to 17MW.

Flame Proof motor exd limit 5MW.

11054 NIDEC Ansaldo Sistemi Industriali S.P.A Italy

Main Category Diesel Generators

Sub Category DIESEL DRIVEN GENERATORS

No Contractor Name Location Limitations/Conditions

6751 WARTSILA POWER CONTRACTING CO. LTD Finland

Wednesday, March 11, 2020 Page 69 of 304

8343 MAN Germany

9244 GE USA For Models:V228 ,V250 , L250

9156 DOOSAN ENGINE Korea Model # 12V32/40

6754 ATLAS COPCO AIRPOWER N.V. Antwerp, Belgium

6755 CATERPILLAR USA

6752 CUMMINS USA

6749 BALDORGEN USA

Wednesday, March 11, 2020 Page 70 of 304

6750 DETRIOT DIESELS USA

6753 STEWART & STEVENSON USA

Main Category DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV

Sub Category DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV

No Contractor Name Location Limitations/Conditions

7349 MG/EGIC France

7350 SDCEM France

7348 HAPAM Netherlands

7347 ALPHA NIDAU Switzerland

Wednesday, March 11, 2020 Page 71 of 304

6589 ABB ( T& D) USA

6650 S&C USA

6647 JAPAN AE POWER SYSTEMS CORP. Japan

6633 EFACEC PORTUGAL

6616 AREVA France

6665 SIEMENS Germany

7351 SOUTHERN STATES USA

Main Category Diverter/ Weather Dampers and drive system & Bypass Stack and Silencer

Wednesday, March 11, 2020 Page 72 of 304

 Sub Category Diverter/ Weather Dampers and drive system & Bypass Stack and Silencer

No Contractor Name Location Limitations/Conditions

9449 Samkwang Power System Korea

9922 Clyde Bergemann Bachmann USA

10066 BALTEC Australia Fabrication shall be done in SEC

approval shop.

10859 Innova Global Canada

11057 SF Pathway Metroflex United States

11635 MAAR GROUP & DTL ( Damper Technology United Kingdom

)

9173 Effox-Flextor Canada

Wednesday, March 11, 2020 Page 73 of 304

9448 Nem Power System Germany

11077 BRADEN Europe B.V Netherlands Fabrication must be done by SEC

Approved workshop.

9450 Fellow Co., LTD Japan No limitation

Main Category Dryers

Sub Category AIR DRYERS

No Contractor Name Location Limitations/Conditions

5221 INGERSOLL RAND USA

5238 DELTECH Country of origin is

subject to SEC
approval

5237 GDI Country of origin is

subject to SEC
approval

Wednesday, March 11, 2020 Page 74 of 304

5236 PNEUMATIC PRODUCTIONS CORPORATION Country of origin is
subject to SEC
approval

5235 ATLAS COPCO Antwerp, Belgium

5234 KEMP Country of origin is

subject to SEC
approval

5223 SULLAIR Country of origin is

subject to SEC
approval

Sub Category H2 GAS DRYER

No Contractor Name Location Limitations/Conditions

7555 E-ONE, GCMX USA

Main Category Emergency Shutdown System (ESD)

Sub Category Emergency Shutdown System (ESD)

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 75 of 304

9323 Yokogawa-Saudi Arabia Saudi Arabia 1. ESD: Models Prosafe- RS2. All
equipment, instruments & components
(Controllers, I/O cards, Processors,
Communication cards, power supplies
etc) shall be from Yokogawa factory-
Japan.3. All Panels & Marshalling
Cabinets shall be procured from M/s.
RITA

Main Category EMERGENCY SHUTDOWN SYSTEMS

Sub Category ESD PROGRAMMABLE CONTROLLER SYSYTEMS; EMERGENCY SHUTDOWN

SYSTEM; PROGRAMMABLE LOGIC CONTROLLER
No Contractor Name Location Limitations/Conditions
7950 TRICONEX CORPORATION USA

7949 INDUSTRIAL CONTROL SERVICES USA

7948 INDUSTRIAL CONTROL SERVICES LTD. United Kingdom

Main Category ESP

Sub Category Electrostatic Precipitator (ESP)

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 76 of 304

9410 ALSTOM Sweden AB

9382 NOL-TEC USA

9371 Fisia Babcock Environment Gmbh Germany All Sub-Vendor should be in SEC
approved vendor list.

8730 IHI Corporation Japan All Sub-Vendor should be from SEC

approved vendor list.

9827 KC Cottrell Korea

9312 Lodge Cottrell Limited United Kingdom

Main Category FANS & BLOWERS

Sub Category BOILER FANS (ID, FD & GR)

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 77 of 304

10656 TLT. Turbo Gmbh Germany

6524 FLAKT SOLYVENT France

6525 BOLDROCCHI Italy

6527 Mitsubishi Hitachi Power Systems (MHPS) Japan

6469 TLT BABCOCK USA

6470 HOWDEN POWER Denmark

9432 Howden United Kingdom

Wednesday, March 11, 2020 Page 78 of 304

5103 HITACHI Japan

6472 FLAKTWOODS AB / ABB SWEDEN

Sub Category Cooling Fans

No Contractor Name Location Limitations/Conditions

9162 illinois blower, inc. USA Model (0132), Model (1643) & Model
(1233)

10097 Zamil Hudson Saudi Arabia Fans and its auxiliaries shall be from SEC
approved vendors list

10347 COFIMCO SRL Italy

9982 Howden China D- Series

Main Category FIELD INSTRUMENTATION

Wednesday, March 11, 2020 Page 79 of 304

 Sub Category FIELD INSTRUMENTATION FOR BOILER

No Contractor Name Location Limitations/Conditions

5066 SIEMENS Saudi Arabia

7600 TEMP PRO USA

7599 FISHER ROSEMOUNT Italy / USA

7601 BAILEY (ABB) USA

Main Category FLAME MONITORING SYSTEMS

Sub Category INSTRUMENTATION ANALYTICAL MEASUREMENTS: FLAME SUPERVISORY

SYSTEMS
No Contractor Name Location Limitations/Conditions
7595 IRIS (E) CANADA / USA

7590 HONEYWELL, INC USA

Wednesday, March 11, 2020 Page 80 of 304

7589 Forney Corporation USA

7588 FIREYE (UTC) USA

7593 ALLEN BRADLEY (ROCKWELL USA

AUTOMATION)

Main Category FLOW COMPUTERS

Sub Category INSTRUMENTATION ANALYTICAL MEASUREMENTS: COMPUTERS (FLOW)

No Contractor Name Location Limitations/Conditions

7579 DANIEL (EMERSON) USA

7582 FISHER (EMERSON) USA

7581 OMNI USA

Main Category FLOWMETERS

Wednesday, March 11, 2020 Page 81 of 304

 Sub Category ULTRASONIC FLOWMETERS; FLOW METER: ULTRASONIC; LIQUID, GAS AND
FLARE LINE SERVICE
No Contractor Name Location Limitations/Conditions
10305 Endress+Hauser Flowtec AG,Switzerland Switzerland

7744 SICK-ENGINEERING GMBH Germany

7741 EMERSON-DANIEL DIVISION USA

7740 INSTROMET INTERNATIONAL NV Essen, BE

7739 ROXAR FLOW MEASUREMENT (PREV. Bergen, NO

FLUENTA)

7736 KROHNE Germany

7738 GE PANAMETRICS Shannon, IE

Wednesday, March 11, 2020 Page 82 of 304

Main Category Flue Gas Desulphurization Plant (SWFGD)

Sub Category Flue Gas Desulphurization plant (SWFGD)

No Contractor Name Location Limitations/Conditions

8729 IHI Corporation Japan All Sub-Vendor should be from SEC
approved vendor list.

9412 ALSTOM Oslo, Norway/

Wiesbaden,
Germany

9409 ALSTOM POWER ITALIA SPA Italy - Fabrication must be done by SEC
approved workshop.

9276 Fisia Babcock Environment Gmbh (FBE) Germany All Sub-Vendor should be in SEC
approved vendor list.

8923 AE&E (DOOSAN) Germany Sea Water Flue Gas Desulphurization

Plant (SWFGD) Only

Wednesday, March 11, 2020 Page 83 of 304

10043 Mitsubishi Hitachi Power Systems (MHPS) Japan

Main Category Fuel Gas Compressors

Sub Category FUEL GAS COMPRESSORS

No Contractor Name Location Limitations/Conditions

5233 UNIVERSAL COMPRESSION USA

5231 AC COMPRESSOR USA

5226 DRESSER RAND Singapore

5045 GE Oil & Gas compression system USA

5252 MAN Germany

Wednesday, March 11, 2020 Page 84 of 304

10880 Ingersoll Rand USA No Limitation

12071 Airpack Netherland B.V. Netherlands To use SEC Approved Vendor List OEMs
of Equipments.

10974 GE Nuovo Pignone SPA Italy

5256 KAWASAKI HEAVY IND. LTD. Japan

5255 ATLAS COPCO Germany / USA

5253 ROLLS ROYCE United Kingdom

5254 DRESSER – RAND Country of origin is

subject to SEC
approval

Wednesday, March 11, 2020 Page 85 of 304

11826 GEA Refrigeration Italy S.p.A Italy

Main Category Fuel Gas Treatment

Sub Category FUEL GAS TREATMENT

No Contractor Name Location Limitations/Conditions

5245 OIL & GAS SYSTEMS Country of origin is
subject to SEC
approval

5251 UNIVERSAL COMPRESSORS Country of origin is

subject to SEC
approval

10391 Petrogas Netherlands

11704 CDB Engineering Italy

11899 GE Nuovo Pignone SPA Italy

Wednesday, March 11, 2020 Page 86 of 304

11972 Process Group International United Arab
Emirates

12210 John Crane Indufill B.V Netherlands - For Generartion Engineering and
Project Sector.

5243 Sigma Thermal Inc. USA Country of origin is

subject to SEC
approval

5246 PEERLESS Dalas,USA

5244 HANOVER SMITH Country of origin is

subject to SEC
approval

5250 TRAN-AM Country of origin is

subject to SEC
approval

Wednesday, March 11, 2020 Page 87 of 304

5242 GAS PACKAGERS Country of origin is
subject to SEC
approval

5241 Integrated Flow Solutions Country of origin is

subject to SEC
approval

5240 Peerless Mfg Co Country of origin is

subject to SEC
approval

5239 ANDERSON SEPARATOR/CLARK USA

RELIANCE/NATIONAL FILTRAT

5249 TOTAL ENERGY RESOURCES Country of origin is

subject to SEC
approval

Main Category FUEL METERING SYSTEMS & PROVERS

Sub Category Metering Control Systems, ST500, ST501

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 88 of 304

8915 Swinton Technology, UK United Kingdom

Main Category Fuel Oil Pumps

Sub Category FUEL OIL PUMPS

No Contractor Name Location Limitations/Conditions

5176 COLFAX CREOSOTING CO USA

11979 Ensival Moret (em-pumps) Belgium

11674 KRAL Austria - Limitation:-

For Generartion Engineering & Project
Sector.

Condition:-
1- Motor selection from SEC approved
suppliers.
2- Type: Triple screw.

11507 Tuthill United Kingdom

Wednesday, March 11, 2020 Page 89 of 304

9392 Hyundai Heavy Industries co., LTD. Korea Model HD, max flow 700 m3/h total
head 45 m

8192 PATTERSON USA

8191 VIKING USA

5092 FLOWSERVE France, United

Kingdom &
Austria,Germany

8188 SULZER PUMPS Germany / United

Kingdom / USA

5174 CERPELLI Italy

5172 LEISTRITZ Germany

Wednesday, March 11, 2020 Page 90 of 304

5170 IMO USA

5169 ALLWEILER Germany

5098 EBARA Japan

8190 GOULDS PUMPS USA

Sub Category HFO/CO Booster pumps

No Contractor Name Location Limitations/Conditions

8193 Ebara Japan

Main Category Fuel Oil Treatment

Sub Category FUEL OIL EQUIPMENT (HEATERS, FILTERS, CHEMICAL FUEL)

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 91 of 304

12273 John Crane Indufill B.V Netherlands Limitation:-
- For Generartion Engineering and
Project Sector.

Conditions:-
- Fuel Oil Seal gas filtration, Duplex
filtration separators, Fuel gas coalesces
filtration and lube oil filtration for
pumps.

5179 METI (FILTERS) Italy

5177 COLFAX CREOSOTING CO USA

5178 CAMPI Italy

11892 SAMPI S.p.A. Italy Heaters only.

Sub Category Fuel Oil Treatment Plant

No Contractor Name Location Limitations/Conditions

9333 ALFA LAVAL Sweden

Wednesday, March 11, 2020 Page 92 of 304

9334 Westfalia Germany

12211 John Crane Indufill B.V Netherlands - For Generartion Engineering and
Project Sector.

Main Category Fuel Unloading

Sub Category Fuel Unloading Arm

No Contractor Name Location Limitations/Conditions

10467 STV GmbH Germany

10466 EMCO WHEATON Germany

Main Category Gas Turbine

Sub Category COMBUSTION TURBINE

No Contractor Name Location Limitations/Conditions

11971 Siemens Dammam Energy Hub Saudi Arabia

Wednesday, March 11, 2020 Page 93 of 304

5068 ALSTOM POWER Birr,Switzerland
/Chattanooga,USA/
Mannheim,German
y

5044 General Electric (GE) USA

5048 Mitsubishi Hitachi Power Systems (MHPS) Takasago, Japan /

Georgia, USA

5056 SIEMENS Berlin, Germany /

Charlotte, USA

8960 DOOSAN HEAVY INDUSTRIES AND Korea Gas turbine -

CONSTRUCTION CO. LTD. M501F.
Hot Gas Part must be manufactured
and supplied by
MHI.
Extended warranty shall be 5 years

10977 Ansaldo Energia Switzerland AG Switzerland

Wednesday, March 11, 2020 Page 94 of 304

10707 Mitsubishi Heavy Industries Japan

11252 GE Nuovo Pignone SPA Italy Only for :

For Model : GE10-1 , GE10-2. MS 5001
PA, MS 5002C, MS 5002D , MS 5002E,
MS 6001B , MS 7001 EA,

Sub Category GTG intake / exhaust systems

No Contractor Name Location Limitations/Conditions

9859 BIS Gerber Gmbh Germany

9286 Innova Global Canada GAS Turbine and HRSG Exhaust System

10695 Camfil Farr Power Systems Sweeden No Limitations.

9905 Northern Technical L.L.C. UAE For:

1-Simple Cycle Power Plant
2-Supporting acceptance letter shall be
provided from Gas Turbine
Manufacturer.

Wednesday, March 11, 2020 Page 95 of 304

9254 Advance Triad - Turbine Services Ltd. Saudi Arabia M/S BIS Gerber GmbH-Germany
(Filter House Re-Engineering).

11730 AAF (UK) United Kingdom

11910 BRADEN Europe B.V Netherlands Fabrication must be done by SEC

Approved workshop.

Main Category General Service Pumps

Sub Category CLOSED CIRCUIT COOLING WATER PUMPS

No Contractor Name Location Limitations/Conditions

11803 Hyosung Goodsprings, Inc. (HGS) Korea

9769 TERMOMECCANICA Italy Model : DD

10181 Ganz Engineering Hungary

Wednesday, March 11, 2020 Page 96 of 304

11955 Young Poong Precision Corporation Korea - Capacity up to : 27000 m3/hr.

11983 Ensival Moret (em-pumps) Belgium

Sub Category CONDENSATE PUMPS AND MOTORS

No Contractor Name Location Limitations/Conditions

11306 CLYDE UNION PUMPS United Kingdom

5102 HITACHI Japan

9146 Flowserve- Coslada Spain Models (APKD & QL )

5153 Sulzer Pumps USA

5156 TERMOMECCANICA Italy

Wednesday, March 11, 2020 Page 97 of 304

5096 EBARA Japan

8957 KUBOTA Japan For :1-Condensate Booster

PumpModel No : MV-V(P)/DF-
V(P)Flow : 1,500 m3/hrHead : 280 m

Motor rating : 880 kw 2-Condenste

Extraction Pump Model No: MV-
V(P)/DF-V(P)Flow : 1500 m3/hr Head :
190 mMotor rating :540 kw

5121 KSB Germany

9390 Hyundai Heavy Industries co., LTD. Korea Model VW, max flow 1800 head 325
meter

9936 DMW Japan model: VPF

Rate: 2000 m3/min.
Head: 32 m

10373 sterling SIHI S . A . S Germany

Wednesday, March 11, 2020 Page 98 of 304

11936 GE Nuovo Pignone SPA Italy

11946 Sulzer Saudi Pump Company LLC Saudi Arabia - Assembly shop only.

5089 FLOWSERVE France, United

Kingdom & Austria

5154 GOULDS PUMPS USA

9977 Hyosung GoodSprings, Inc.(HGS) Korea

5085 SULZER PUMPS Germany / United

Kingdom / USA

8694 TORISHIMA PUMPS Japan

Sub Category CONDENSER VACUUM SYSTEM

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 99 of 304

5208 SVS Germany

Sub Category CONTROLGEAR, OUTDOOR, HIGH VOLTAGE, SUBMERSIBLE PUMP

No Contractor Name Location Limitations/Conditions

8977 ABB ELECTRICAL IND. CO., LTD. (AEIL) Saudi Arabia None

8981 WESCOSA Saudi Arabia None

8980 REMAL Saudi Arabia None

8979 HAWA EPBF Saudi Arabia None

Sub Category MISCELLANEOUS AUXILIARY PUMPS CENTRIFUGAL VERTICAL/HORIZONTAL

INCLUDING EL MOTORS
No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 100 of 304

8950 KUBOTA Japan For:1-FGD Supplementary Seawater
PumpModel No : DF-VFlow :47,310
m3/hrHead :16mMotor rating:
2,800kw2- Absorber Spray
PumpModel No :DF-VFlow : 12,800
m3/hrHead : 21-31 mMotor rating
:1,000-1,450 kw3-MSF Seawater
Supply Pump :Model No :DF-VFlo

8719 Sulzer Saudi Pump Company LLC Saudi Arabia Models : VS1,VS6,OH2

9919 ITT Goulds Pumps Co. LTD Korea Model series:31XX,34XX,36XX,37XX and
39XX

9391 Hyundai Heavy Industries co., LTD. Korea Model VK, max flow 7000 m3/hr head
75 meter

10256 TORISHIMA PUMPS Japan

10959 Young Poong Precision Corporation Korea

Wednesday, March 11, 2020 Page 101 of 304

11004 Ensival Moret (em-pumps) Belgium

11256 GE Nuovo Pignone SPA Italy Only for :

DVS centrifugal pump, HTF Centrifugal
pump.

5093 FLOWSERVE France, United

Kingdom & Austria

5257 VERGANI / FINDER Italy

5099 EBARA Japan

5124 KSB Germany

5161 TERMOMECCANICA Italy

Wednesday, March 11, 2020 Page 102 of 304

5247 PEERLESS Dalas,USA

8662 Hyosung GoodSprings, Inc.(HGS) Korea

5258 GARBARINO Italy

5265 LOWARA Country of origin is

subject to SEC
approval

5267 GROUNDFOS Country of origin is

subject to SEC
approval

5264 Sulzer Pumps USA

5263 SULZER PUMPS Germany / United

Kingdom / USA

Wednesday, March 11, 2020 Page 103 of 304

5260 AURORA PUMPS Country of origin is
subject to SEC
approval

5259 RUTCHIE (ONLY FOR HORIZONTAL) France, Swiss

Sub Category VACUUM PUMPS

No Contractor Name Location Limitations/Conditions

11982 Ensival Moret (em-pumps) Belgium

5274 NITECH USA

5273 NASH USA

5272 GRAHAM MANUFACTURING Country of origin is

subject to SEC
approval

Main Category Heat Exchangers

Wednesday, March 11, 2020 Page 104 of 304

 Sub Category Air Pre heaters

No Contractor Name Location Limitations/Conditions

10997 Alstom Germany

11082 Vulcanic UK France Capacity, 36000KW

11837 Wallstein Ingenieur GmbH Germany

Sub Category CLOSED CIRCUIT COOLING WATER COOLERS

No Contractor Name Location Limitations/Conditions

10145 ECODYNE USA

11144 SANTAZ-CENSA S.A. PORRINO-

PONTEVEDRA, ES

11143 HUGHES-ANDERSON HEAT EXCHANGERS, USA

IN

Wednesday, March 11, 2020 Page 105 of 304

11141 FBM - HUDSON ITALIANA SPA TERNO D'ISOLA, IT

11140 OLMI SVISIO, IT

11139 OLAYAN DESCON ENGINEERING COMPANY Saudi Arabia

10862 FUNKE GERMANY

11137 LARSEN AND TOUBRO LIMITED India

4951 LINDE A.G. PROCESS ENG. & CONTRACTING TECHTERTING, DE

4950 ALFA-LAVAL THERMAL AB Maarssen, NL

Wednesday, March 11, 2020 Page 106 of 304

4952 ALFA-LAVAL THERMAL, INC. USA

4955 Mitsubishi Hitachi Power Systems (MHPS) Japan

4953 TRANTER INC./TEXAS DIV/DOVER DIVERS USA

11145 INDUSTRIE MECCANICHE DI BAGNOLO Italy

10092 TSM Tech Co., Ltd. Korea

8335 GULF STEEL WORKS Saudi Arabia

5140 ALSTOM HEAT EXCHANGE Hungary

Wednesday, March 11, 2020 Page 107 of 304

5139 MARLEY/BALKE DURR Germany

5039 ALFA LAVAL Sweden

5032 GEA Japan

11138 GULF ENGINEERING CO. FOR HEAT Saudi Arabia

EXCHANGERS

11159 HITACHI, LTD. KASADO WORKS Japan

11170 Unimit Engineering Thailand

11167 BHI Korea

Wednesday, March 11, 2020 Page 108 of 304

11164 NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

11162 TAKAHASHI IRON WORKS CO., LTD. Japan

11161 KAWASAKI HEAVY IND., LTD. Japan

4954 HISAKA WORKS, LTD. Japan

11160 HYUNDAI HEAVY INDUSTRIES CO,LTD ULSAN

KYUNGNAM, KR

11146 ABB ALSTOM POWER KASSEL, DE

11158 R. E. ENGINEERING ASKAR, BM

Wednesday, March 11, 2020 Page 109 of 304

11149 BELLELI ENERGY SRL MANTOVA, IT

11148 STAHL-UND APPARATEBAU HANS LEFFER G SAARBRUEZKEN-

DVOWEILER, DE

11157 BRONSWERK HEAT TRANSFER B.V. Netherlands

11150 OFFICINE LUIGI-RESTA S.P.A. SCANZOROSCIATE

11152 AL-GASWA SUPPORT CO., LTD. Saudi Arabia

11153 KOREA HEAVY INDUSTRIES AND KYUNGNAM, KR

CONSTRUCTION

11154 MITSUI BABCOCK United Kingdom

Wednesday, March 11, 2020 Page 110 of 304

11155 HITACHI ZOSEN Japan

11147 SHELL AND TUBE INCORPORATED USA

11156 OHMSTEDE, INC. USA

Sub Category CONDENSER, AIR COOLED (ACC)

No Contractor Name Location Limitations/Conditions

10079 S&T Corporation Korea •Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
•All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
•All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

9595 GEA China Fabrication shop only

Wednesday, March 11, 2020 Page 111 of 304

5136 SPX Cooling Technologies, Inc. (MARLEY) USA / Belgium /
Germany / United
Kingdom

5033 GEA Energietechnik GmbH South Africa /

Germany

12302 Arabian International Company AIC Saudi Arabia Limitation: Air cooled Condenser (ACC)
Except Tube Bundle
Condition: Engineering and design by
SEC Approved OEM.

9852 DTS Inc. Korea For Multiple rows bundle fabrication

shop only

10252 HOLTEC INTERNATIONAL USA

9809 SPX Cooling Technologies GmbH China Fabrication shop only

Wednesday, March 11, 2020 Page 112 of 304

9798 GEA EGI Contracting Hungary

9879 RESEARCH COTTRELL DRY COOLING, INC Belgium - The ACC is only approved to be
(RCDC) fabricated in HAMON D'HONDT Middle
East Co. Ltd., Jubail facility or RESEARCH
COTTRELL DRY COOLING, INC (RCDC),
China.
- Engineering and Design must be done
at Research-Cottrell Dry Cooling
office,Belguim.
-All Stainless and Carbon steel headers
must be supplied from France.
-All installed Fans,Motors and Gearbox
shall be as SEC AVL.

Sub Category CONDENSER, WET SURFACE

No Contractor Name Location Limitations/Conditions

5135 SPX (MARLEY) USA

10091 TSM Tech Co., Ltd. Korea

10686 SEDAE ENERTECH Korea

Wednesday, March 11, 2020 Page 113 of 304

5206 YUBA Country of origin is
subject to SEC
approval

5204 GRAHAM MANUFACTURING USA

5052 Mitsubishi Hitachi Power Systems (MHPS) Japan

9589 SEWON CELLONTECH Korea As a fabrication shop only.

8743 BHI Korea

Wednesday, March 11, 2020 Page 114 of 304

10253 PT. Siemens Cilegon, Indonesia - All engineering and design must be
done at Siemens, Germany.
- The Condenser tubes and Tube sheet
must be sourced through Siemens,
Mulhaim, Germany.
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

5057 SIEMENS Germany

5207 HOLTEC INTERNATIONAL USA

5070 ALSTOM France

5205 Thermal Engineering International (TEI) USA

Sub Category COOLING TOWERS

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 115 of 304

5137 MIDWEST TOWERS, INC USA

5134 SPX (MARLEY) USA

8712 SPIG S.p.A. Societ per impianti Generali Italy WET COOLING TOWERS

9532 HAMON Thermal Europe France Wet Cooling Only.

5031 GEA Polacel Cooling Towers FZCO Japan

5138 INTERNATIONAL COOLING TOWER USA

Sub Category FEED WATER HEATERS

No Contractor Name Location Limitations/Conditions

9782 Foster Wheeler Spain

Wednesday, March 11, 2020 Page 116 of 304

4996 ALSTOM (ABB TECHNOLOGY) Hungary

4999 BALKEDURR Germany

10173 Energyen Corporation Korea

10245 APL Apparatebau GmbH Austria

10250 HOLTEC INTERNATIONAL USA

10258 Thermal Engineering International (TEI) USA

10357 SEDAE ENERTECH Korea

Wednesday, March 11, 2020 Page 117 of 304

10361 TSM Tech Co., Ltd. Korea

10435 BHI Korea

10440 STF SPA Italy Italy Up to 700 MW

10825 CAMPI Italy

11298 Zamil Steel Co. Saudi Arabia Water bath heaters

11931 SEWON CELLONTECH Korea As a fabrication shop only.

4997 Mitsubishi Hitachi Power Systems (MHPS) Japan

Sub Category Gas Gas Heater (GGH)

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 118 of 304

10236 Wallstein Ingenieur GmbH Germany

10860 Burmeister & Wain Energy A/S (BWE),STF Denmark all sub venders for the main parts shall
be approved by sec

9431 Balcke-Durr Gmbh (BDRM) Germany

9433 Alstom Germany

Sub Category HEAT EXCHANGER: SHELL AND TUBE HEAT EXCHANGER; CARBON STEEL OR
LOW ALLOY AND MAX. WALL THICKNESS OF 38 MM (1.5 IN.)
No Contractor Name Location Limitations/Conditions
10170 DBI Corporation Korea

9869 BHI Korea

8337 GULF STEEL WORKS Saudi Arabia

Wednesday, March 11, 2020 Page 119 of 304

4699 HITACHI ZOSEN Japan

11027 Unimit Engineering Thailand

4618 OLAYAN DESCON ENGINEERING COMPANY Saudi Arabia

11292 TSM Arabia Saudi Arabia

4813 STAHL-UND APPARATEBAU HANS LEFFER G SAARBRUEZKEN-

DVOWEILER, DE

11653 Cimtas Celik Imalat Montaj Turkey

4878 MITSUI BABCOCK United Kingdom

Wednesday, March 11, 2020 Page 120 of 304

5004 INDUSTRIE MECCANICHE DI BAGNOLO Italy

4885 KOREA HEAVY INDUSTRIES AND KYUNGNAM, KR

CONSTRUCTION

4914 TAKAHASHI IRON WORKS CO., LTD. Japan

5010 NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

4985 SHELL AND TUBE INCORPORATED USA

4920 GULF ENGINEERING CO. FOR HEAT Saudi Arabia

EXCHANGERS

4925 BRONSWERK HEAT TRANSFER B.V. Netherlands

Wednesday, March 11, 2020 Page 121 of 304

4928 FBM - HUDSON ITALIANA SPA TERNO D'ISOLA, IT

4968 BELLELI ENERGY SRL MANTOVA, IT

4972 OFFICINE LUIGI-RESTA S.P.A. SCANZOROSCIATE

4978 HUGHES-ANDERSON HEAT EXCHANGERS, USA

IN

5006 HITACHI, LTD. KASADO WORKS Japan

4981 OHMSTEDE, INC. USA

4680 SANTAZ-CENSA S.A. PORRINO-

PONTEVEDRA, ES

Wednesday, March 11, 2020 Page 122 of 304

4998 Mitsubishi Hitachi Power Systems (MHPS) Japan

5000 AL-GASWA SUPPORT CO., LTD. Saudi Arabia

5001 R. E. ENGINEERING ASKAR, BM

5008 KAWASAKI HEAVY IND., LTD. Japan

5007 HYUNDAI HEAVY INDUSTRIES CO,LTD ULSAN

KYUNGNAM, KR

4890 ABB ALSTOM POWER KASSEL, DE

4798 LARSEN AND TOUBRO LIMITED India

Wednesday, March 11, 2020 Page 123 of 304

4789 OLMI SVISIO, IT

Sub Category HEAT EXCHANGER: SURFACE STEAM CONDENSER SYSTEM: COMPLETE WITH
EJECTORS & CONDENSER EXCHANGER
No Contractor Name Location Limitations/Conditions
9198 Energyen Corporation Korea Fabrication Shop only.

10450 WOOYANG HC CO.,LTD Korea Tube Bundel, Shell &tube type.

10442 STF SPA Italy Italy Up to 900MW

10078 S&T Corporation Korea •Components to be fabricated

following ASME procedures and shall
bear ASME stamp.
•All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
•All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

12024 Posco plantec Korea

Wednesday, March 11, 2020 Page 124 of 304

8714 DBI Corporation Korea Fabrication shop only

4834 TECHNOTHERM CORPORATION USA

9781 Foster Wheeler Spain

9865 BHI Korea

Sub Category HEAT EXCHANGERS: AIR COOLED HEAT EXCHANGERS / FIN FAN COOLERS

No Contractor Name Location Limitations/Conditions

10172 Energyen Corporation Korea

9953 Hamon D'Hondt Middle East Saudi Arabia - Engineering and Design must be done
at Hamon D'Hondt.S.A office,France.
-All Stainless and Carbon steel headers
and pressure parts must be supplied
from France.
-All installed Fans,Motors and Gearbox
shall be supplied from USA,West Europe
or Japan.

Wednesday, March 11, 2020 Page 125 of 304

10025 GEA EGI Contracting Hungary

10026 ECODYNE USA

10074 Daekjung Machinery & Engineering Co, Ltd Korea •Components to be fabricated
(DKME) following ASME procedures and shall
bear ASME stamp.
•All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
•All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

10093 TSM Tech Co., Ltd. Korea

9861 BHI Korea

10166 DTS Inc. Korea

Wednesday, March 11, 2020 Page 126 of 304

10255 APL Apparatebau GmbH Austria

10251 HOLTEC INTERNATIONAL USA

10486 Ecodyne UET Switzerland Compact Type

10679 Kelvion France Compact Type

11258 GE Nuovo Pignone SPA Italy

11259 Alfa Laval Vantaa Oy Finland

11310 Alfa laval alonte site Italy

Wednesday, March 11, 2020 Page 127 of 304

10094 ZAMIL STEEL INDUSTRIES Saudi Arabia No Limitation

4714 KAWASAKI HEAVY IND., LTD. Japan

10083 S&T Corporation Korea •Components to be fabricated

following ASME procedures and shall
bear ASME stamp.
•All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
•All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

4617 OLAYAN DESCON ENGINEERING COMPANY Saudi Arabia

9715 Zamil Hudson Saudi Arabia

4764 Mitsubishi Hitachi Power Systems (MHPS) Japan

Wednesday, March 11, 2020 Page 128 of 304

4787 OLMI SUISIO, IT

4911 TAKAHASHI IRON WORKS CO., LTD. Japan

4916 GULF ENGINEERING CO. FOR HEAT Saudi Arabia

EXCHANGERS

4922 BATIGNOLLES TECHNOLOGIES NANTES, FR

THERMIQUES

4927 FBM - HUDSON ITALIANA SPA TERNO DISOLA, IT

4930 GEA LUFTKUEHLER HERNE, DE

4931 GEA RAINEY CORP. USA

Wednesday, March 11, 2020 Page 129 of 304

4932 HUDSON PRODUCTS CORPORATION USA

4935 KOREA HEAVY INDUSTRIES AND KYOUNGKI-DO, KR

CONSTRUCTION

4937 SASAKURA ENGINEERING CO., LTD. Japan

8333 GULF STEEL WORKS Saudi Arabia

8962 Jord International PTY Ltd. Korea

4924 BRONSWERK HEAT TRANSFER B.V. Netherlands

Sub Category HEAT EXCHANGERS: ELECTRICAL HEAT EXCHANGERS

No Contractor Name Location Limitations/Conditions

4956 ELTRON CHROMALOX United Kingdom

Wednesday, March 11, 2020 Page 130 of 304

4957 WELLMAN THERMAL SYSTEMS USA

4716 KAWASAKI HEAVY IND., LTD. USA

Sub Category HEAT EXCHANGERS: MULTI-PIPE HEAT EXCHANGERS

No Contractor Name Location Limitations/Conditions

11021 BERTSCH Energy Bludenz , Austria

4829 Peerless Mfg Co USA

4883 KOREA HEAVY INDUSTRIES AND KYUNGYAM, KR

CONSTRUCTION

4917 GULF ENGINEERING CO. FOR HEAT Saudi Arabia

EXCHANGERS

Wednesday, March 11, 2020 Page 131 of 304

4940 BROWN FINTUBE FRANCE SA THONON-LT3-
BAINS, FR

4942 BROWN FINTUBE COMPANY USA

4943 JAPAN STEEL WORKS, LTD. Japan

4947 Posco plantec ULSAN CITY, KR

8334 GULF STEEL WORKS Saudi Arabia

8680 KT heavy Industries Co. Ltd. Korea 1-Manufacturng in Korea2-KT Heavy

Industries to Provide Extended
Warrantee to 5 Years Surface Area
(EFF./SHEL ) up to 570 m2

10684 SEDAE ENERTECH Korea

Wednesday, March 11, 2020 Page 132 of 304

4765 Mitsubishi Hitachi Power Systems (MHPS) Japan

4715 KAWASAKI HEAVY IND., LTD. Japan

Sub Category HEAT EXCHANGERS: PLATE TYPE HEAT EXCHANGERS

No Contractor Name Location Limitations/Conditions

11177 TRANTER INC./TEXAS DIV/DOVER DIVERS USA

11178 ALFA-LAVAL THERMAL, INC. USA

11640 AL ZAMIL HEAVY INDUSTRIES LTD. Saudi Arabia - Shell And tube type.

11176 HISAKA WORKS, LTD. Japan

11175 Mitsubishi Hitachi Power Systems (MHPS) Japan

Wednesday, March 11, 2020 Page 133 of 304

11174 ALFA-LAVAL THERMAL AB Maarssen, NL

11173 LINDE A.G. PROCESS ENG. & CONTRACTING TECHTERTING, DE

11172 GULF STEEL WORKS Saudi Arabia

11179 FUNKE Germany

Sub Category HEAT EXCHANGERS: SHELL-AND-TUBE HEAT EXCHANGER: SHELL AND TUBE
TYPE; ALL MAT'L OTHER THAN CARBON STEEL & LOW ALLOY, OR WALL THK
No Contractor Name Location Limitations/Conditions
4986 SHELL AND TUBE INCORPORATED USA

4929 FBM - HUDSON ITALIANA SPA TERND D'ISOLA, IT

4946 JAPAN STEEL WORKS, LTD. Japan

Wednesday, March 11, 2020 Page 134 of 304

4969 BELLELI ENERGY SRL MANTOVA, IT

4973 OFFICINE LUIGI-RESTA S.P.A. SCANZOROSCIATE,

IT

4982 OHMSTEDE, INC. USA

5005 INDUSTRIE MECCANICHE DI BAGNOLO Italy

5011 NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

5012 LARSEN AND TOUBRO LIMITED India

4926 BRONSWERK HEAT TRANSFER B.V. Netherlands

Wednesday, March 11, 2020 Page 135 of 304

5014 KOBE STEEL LIMITED Japan

4814 STAHL-UND APPARATEBAU HANS LEFFER G SAARBRUEZKEN-

DVOWEILER, DE

5013 ISHIKAWAJIMA-HSRIMA HEAVY Japan

INDUSTRIES CO.

4921 GULF ENGINEERING CO. FOR HEAT Saudi Arabia

EXCHANGERS

4915 TAKAHASHI IRON WORKS CO., LTD. Japan

4886 KOREA HEAVY INDUSTRIES AND KYUNGNAM, KR

CONSTRUCTION

8336 GULF STEEL WORKS Saudi Arabia

Wednesday, March 11, 2020 Page 136 of 304

4872 BILFAL Heavy Industries Ltd Saudi Arabia

5009 KAWASAKI HEAVY IND., LTD. Japan

4790 OLMI SVISIO, IT

4769 Mitsubishi Hitachi Power Systems (MHPS) Japan

4739 SUMITOMO HEAVY INDUSTRIES, LTD. Japan

4707 HYUNDAI HEAVY INDUSTRIES CO., LTD. Korea

4681 SANTAZ-CENSA S.A. PORRINO-

PONTEVEDRA, ES

Wednesday, March 11, 2020 Page 137 of 304

4700 HITACHI ZOSEN Japan

4879 MITSUI BABCOCK United Kingdom

10192 FUNKE GERMANY

10898 STF SPA Italy Italy

11028 Unimit Engineering Thailand

11838 Wallstein Ingenieur GmbH Germany

11902 Arabian Gulf Metal Factory Saudi Arabia

Wednesday, March 11, 2020 Page 138 of 304

11915 Nash Engineering Fzco United Arab
Emirates

9864 BHI Korea

4988 HITACHI KASADO JYUKOGYO Japan

Sub Category HEAT EXCHANGERS: TUBE BUNDLE

No Contractor Name Location Limitations/Conditions

9863 BHI Korea

4948 POSCO PLANTEC CO. LD ULSAN CITY, KR

4970 OFFICINE LUIGI-RESTA S.P.A. SCANZOROSCIATE,

IT

Wednesday, March 11, 2020 Page 139 of 304

4976 HUGHES-ANDERSON HEAT EXCHANGERS, USA
IN

4979 OHMSTEDE, INC. USA

4983 SHELL AND TUBE INCORPORATED USA

4987 HITACHI KASADO JYUKOGYO Japan

4944 JAPAN STEEL WORKS, LTD. Japan

4990 NIIGATA ENGINEERING CO., LTD. Japan

4966 BELLELI ENERGY SRL MANTOVA, IT

Wednesday, March 11, 2020 Page 140 of 304

10826 CAMPI Italy

11914 Nash Engineering Fzco United Arab

Emirates

11967 GULF STEEL WORKS Saudi Arabia

4989 Mitsubishi Hitachi Power Systems (MHPS) Japan

4788 OLMI SUISO, IT

4974 UNIT SUPERHEATER ENGINEERING, LTD. United Kingdom

4941 BROWN FINTUBE FRANCE SA THONAN-LES-

BAINS, FR

Wednesday, March 11, 2020 Page 141 of 304

4697 HITACHI ZOSEN Japan

4705 HYUNDAI HEAVY INDUSTRIES CO., LTD. ULSANKYVNGNAM,

KR

4718 KAWASAKI HEAVY IND., LTD. Japan

4776 KOBE STEEL LIMITED Japan

4870 BILFAL Heavy Industries Ltd Saudi Arabia

4912 TAKAHASHI IRON WORKS CO., LTD. Japan

4918 GULF ENGINEERING CO. FOR HEAT Saudi Arabia

EXCHANGERS

Wednesday, March 11, 2020 Page 142 of 304

4923 BATIGNOLLES TECHNOLOGIES NANTES, FR
THERMIQUES

4933 HUDSON PRODUCTS CORPORATION USA

4938 SASAKURA ENGINEERING CO., LTD. Japan

4737 SUMITOMO HEAVY INDUSTRIES, LTD. Japan

Sub Category HP Preheater

No Contractor Name Location Limitations/Conditions

10257 Thermal Engineering International (TEI) USA

Sub Category Wet Surface Air Cooler (WSAC) / Closed Loop Cooling System

No Contractor Name Location Limitations/Conditions

11297 SPX Cooling Technologies, Inc. USA

Wednesday, March 11, 2020 Page 143 of 304

11220 Niagara Blower Heat Transfer Solutions USA

11303 GEA EGI Contracting Hungary

Main Category HEAVY STEEL STRUCTURE

Sub Category FABRICATION SHOP FOR DIVERTER DAMPER, CHIMNEY, EXHAUST & INTAKE
DUCTS
No Contractor Name Location Limitations/Conditions
10832 ARABIAN INTERNATIONAL CO. (AIC) Saudi Arabia -As a fabrication shop only
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures.
- For diverter damper, the stainless steel
blade assemblies, alloy seal assemblies,
toggle drive mechanisms, hydraulic
power units and seal air systems must
be sourced by the approved OEM.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Wednesday, March 11, 2020 Page 144 of 304

10833 ALFANAR STEEL Saudi Arabia -As a fabrication shop only
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures.
- For diverter damper, the stainless steel
blade assemblies, alloy seal assemblies,
toggle drive mechanisms, hydraulic
power units and seal air systems must
be sourced by the approved OEM.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

10835 Albawardi Steel Industries Saudi Arabia -As a fabrication shop only
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures.
- For diverter damper, the stainless steel
blade assemblies, alloy seal assemblies,
toggle drive mechanisms, hydraulic
power units and seal air systems must
be sourced by the approved OEM.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Wednesday, March 11, 2020 Page 145 of 304

11874 INCO International Oman Condition: AllEngineering design work
must be reviewed and approved by
SEC's accepted OME.

10829 AL-ZAMIL HEAVY INDUSTRIES Saudi Arabia -As a fabrication shop only
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures.
- For diverter damper, the stainless steel
blade assemblies, alloy seal assemblies,
toggle drive mechanisms, hydraulic
power units and seal air systems must
be sourced by the approved OEM.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Wednesday, March 11, 2020 Page 146 of 304

10831 ZAMIL STEEL BUILDINGS Saudi Arabia -As a fabrication shop only
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures.
- For diverter damper, the stainless steel
blade assemblies, alloy seal assemblies,
toggle drive mechanisms, hydraulic
power units and seal air systems must
be sourced by the approved OEM.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

10830 HIDADA LTD. Saudi Arabia -As a fabrication shop only

- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures.
- For diverter damper, the stainless steel
blade assemblies, alloy seal assemblies,
toggle drive mechanisms, hydraulic
power units and seal air systems must
be sourced by the approved OEM.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Sub Category HEAVY STEEL STRUCTURES FOR ST HALL, PIPE RACKS, ELECTRICAL AND
CONTROL BUILDING
No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 147 of 304

8045 HIDADA LTD. Saudi Arabia

11976 Arabian International Co. (AIC) Saudi Arabia ,Asfan None

11916 Nash Engineering Fzco United Arab

Emirates

8943 ALFANAR STEEL Saudi Arabia For:

- Gas Turbine Building Structure
- Substation Structures

11765 International Building Systems Factory Saudi Arabia

(IBSF)

11686 TSM Arabia Saudi Arabia

11647 BEMCO Steel Industries (BSI) Saudi Arabia Steel Structure, Platforms, Pipe racks,
Backstay's, Grating, Ducts for HRSG,
FGD, ESP

Wednesday, March 11, 2020 Page 148 of 304

11638 ARABIAN INTERNATIONAL CO. (AIC) United Arab None
Emirates

9813 Albawardi Steel Industries Saudi Arabia for Pipe racks and pipe s;eepers, Process
equipment service platforms,Production
platform structure,Conveyor
structures,Structural steel buildings,Stair
stringers,Caged ladders Truss
members,Monorail beam,Fabricated
greetings,Compression and bearing
plates.

9470 Cimtas Celik Imalat Montaj Turkey Structure, Platforms, Backstays, Gratings,
casing for Boiler, HRSG, FGD, ESP, ST
Hall,
Pipe racks, Electrical And control
Buildings,
Chimney (Stack), Exhaust & intake ducts.

8058 ARABIAN INTERNATIONAL CO. (AIC) Saudi Arabia

11677 GULF STEEL WORKS Saudi Arabia

8055 ZAMIL STEEL BUILDINGS Saudi Arabia

Wednesday, March 11, 2020 Page 149 of 304

6296 AL-ZAMIL HEAVY INDUSTRIES Saudi Arabia

9802 Mabani Steel L.L.C UAE For:

-Gas Turbine Building Structure
-Substation Structures

11684 Nesma Havatek Industrial Co. Saudi Arabia

Main Category HP/ IP PIPES & SUPPORTS

Sub Category HP/ IP PIPES & SUPPORTS

No Contractor Name Location Limitations/Conditions

5284 TECHNIP Germany

4859 AL-ZAMIL HEAVY INDUSTRIES Saudi Arabia

5287 VALLOUREC -MANNESMANN Germany

Wednesday, March 11, 2020 Page 150 of 304

5285 LISEGA (IP/LP SUPPORTS ONLY) Germany

5286 NORDON France

Main Category HRSG

Sub Category HRSG FABRICATION SHOPS

No Contractor Name Location Limitations/Conditions

9224 Daekjung Machinery & Engineering Co, Ltd Korea - All Engineering and Design work must
(DKME) be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
- All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

Wednesday, March 11, 2020 Page 151 of 304

8676 ALSTOM SETUBAL Portugal - All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM.
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

11005 Al Zamil Heavy Industries Ltd. Saudi Arabia All Engineering and Design work must be
reviewed and approved by SEC's
accepted OEM.
- Components to be fabricated followinq
ASME
procedures and shall bear ASME stamp.

- Carbon steel material shall be sourced

only
from SEC approved vendor list.

- All sourced materials shall be as per

ASME,
ASTM, DIN, BS or JIS.

Wednesday, March 11, 2020 Page 152 of 304

10569 ENERGOINSTAL Katowice Poland Only For:
1 - Tube Finning all Grades.
2 - Economizer coils in Material up to
Grade TP 22
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM.
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

10058 DOOSAN HEAVY INDUSTRIES AND Vietnam - All Engineering and Design work must
CONSTRUCTION CO. LTD. be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Wednesday, March 11, 2020 Page 153 of 304

9889 GS Entec Corp. Korea - All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
- All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

11695 Alstom Arabia Power Factory Co. Ltd KSA Saudi Arabia -Horizontal Type only.
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM.
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

9172 S&T Corporation Korea - All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
- All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

Wednesday, March 11, 2020 Page 154 of 304

8927 Hyundai Heavey Industries Co. Ltd. Korea - All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

8926 Yantai Hyundai Heavy Industries Co.Ltd China - All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Wednesday, March 11, 2020 Page 155 of 304

8741 BHI Korea - All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM.
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

8685 SEDAE ENERTECH Korea - All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
-Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
- All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

Wednesday, March 11, 2020 Page 156 of 304

8656 POSCO PLANTEC CO. LD. Korea - All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

8699 PT Alstom Power Energy System (APESI) Indonesia - All engineering and design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Sub Category HRSG MANUFACTURERS

No Contractor Name Location Limitations/Conditions

10057 Doosan Engineering and Construction Co., Korea
Ltd

Wednesday, March 11, 2020 Page 157 of 304

10845 BERTSCH Energy Bludenz , Austria Vertical type with the following
restriction:
A. maximum of 4 HRGS's per project of
the size typical behind E class GTG
machines.
B. Two pressure level only (HP&LP)
C. With HP steam parameter restricted
to following maximum continuous
rating (MCR)conditions:
1. Mass flow :150 t/hr
2.outlet steam temprture :540 C
3..outlet steam pressure :130 barg

10590 (MHPS) Bacock Hitachi KK Kure Japan

10381 CERREY, S.A. DE C.V.stf Mexico Horizontal

Condition: Engoneering and design must
be approved by Alstom

10155 Ansaldo Caldaie S.p.A Italy

10062 Sumitomo SHI FW Spain

10061 ALSTOM Windsor, USA

Wednesday, March 11, 2020 Page 158 of 304

11125 Hyundai heavy industrial Korea Conditions:-
1- HHI shall fully supervise all the works
in
manufacturing / Fabrication Shop.
2- All the base as well as detail
Engineering & Design
shall be carried by HHI, Korea based on
the License
Agreement with Vogt Power Int. USA for
Horizontal HRSGs and Mitsubishi Heavy
Ind., Japan
for Vertical HRSGs.
3- All raw material shall be sourced from
SEC
approved vendors.
4- All material specifications shall be as
per ASME,
ASTM, DIN, BS or JIS.

5143 DELTAK CORPORATION USA

10059 IHI Japan

10060 Mitsubishi Hitachi Power Systems (MHPS) Japan

Wednesday, March 11, 2020 Page 159 of 304

5144 NOOTER/ERIKSEN USA 1 - For horizontal type HRSG no
limitaions.
2 - For Vertical type HRSG All basic and
Detailed Engineering and Design works
to be carried out by Nooter/Eriksen,
USA based on the license agreement
with BERTSCH ENERGY, Austria. And the
manufacturing of all the HRSG
components (pressure and non-pressure
parts) to be done in SAUDI ARABIA.

5145 Vogt Power International Inc. USA

8644 CMI Belgium

8683 STF SPA Italy Italy Horizontal HRSG only

8684 NEM Netherlands

Wednesday, March 11, 2020 Page 160 of 304

9134 Standardkessel Baumgarte Germany -Only for HRSG integrated with GTG
Model EA and below.
-Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Main Category Lubrication Oil

Sub Category LUBE OIL SYSTEM

No Contractor Name Location Limitations/Conditions

5217 OLTECHNIK Germany

5216 BOLL & KIRCH Germany

5029 ROTAN Germany

Main Category Measuring Instruments & Transducers

Sub Category TELE PROTECTION SYSTEM (TPS)

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 161 of 304

6667 SIEMENS Germany

6508 ABB SWEDEN /

Switzerland

6619 AREVA France

Main Category Misc. Items

Sub Category Hazardous Area Electrical Auxilliary Devices

No Contractor Name Location Limitations/Conditions

9182 GOVAN Australia 1-Lighting & Fixtures:
Model Type:Exe,Exd,Ex tD
2-Junction & Fixures:
Model Type:Exe,Exd,Exd,Ex tD
3- Receptacles & Plugs :
Model Type:Exd,Ex tD
4- Fitting & Accessories:
Model Type :Exe,Exd
5- Alarm & Signaling auxiliary Devices:
Model Type :Exde,Exd,Ex td
6- Enclosures & Control auxilliary
Devices:
Model Type : Exde,Exd,Ex tD

Main Category Piping

Wednesday, March 11, 2020 Page 162 of 304

 Sub Category MAIN & SECONDARY SEAWATER COOLING WATER PIPES (EXCEPT SEAWATER
PRE-STRESSED CONCRETE PIPE)
No Contractor Name Location Limitations/Conditions
5142 AMIANTIT FIBERGLASS INDUSTRIES Saudi Arabia
LIMITED

4900 HIDADA LTD. Saudi Arabia

5141 AL-ZAMIL METAL WORKS Saudi Arabia

4858 AL-ZAMIL HEAVY INDUSTRIES Saudi Arabia

Sub Category PIPE FITTINGS ; BEND: PIPE; RETURN; ALLOY STEEL

No Contractor Name Location Limitations/Conditions

5540 SPIE ENERTRANS France

5789 BKL FITTINGS LTD. United Kingdom

Wednesday, March 11, 2020 Page 163 of 304

5472 DYNAMIC PRODUCTS INCORPORATED USA

5828 WESTFALENWERK GREBE K.G. Germany

5882 TAE KWANG BEND INDUSTRIES CO., LTD. Korea

5864 SUNG KWANG BEND CO., LTD. Korea

5850 NIPPON BEND CO., LTD. Japan

11118 Global Pipe Company Saudi Arabia Longitudinal Submerged Arc Welded
(LSAW)

5839 TUBE FORGING OF AMERICA Portland, Or

Wednesday, March 11, 2020 Page 164 of 304

5665 BENKAN KIRYU FACTORY Japan

5834 ALASKAN COPPER WORKS Seattle, Wa

5564 BASSI LUIGI Italy

5822 TUBACEX TAYLOR ACCESORIOS Spain

5816 TECTUBI S.R.L. Italy

5801 TECNOFORGE SPA Italy

5680 BENKAN CORPORATION Amagasaki-City

Wednesday, March 11, 2020 Page 165 of 304

5656 LADISH DIVISION/TRINITY INDUSTRIES Russelville, Ar

Sub Category Seamless Alloy Pipes,Over 18"

No Contractor Name Location Limitations/Conditions

5415 PRODUCTOS TUBULARES Vizcaya, Spain

11331 Seonghwa Industrial.co., Ltd. Korea

9492 Wyman Gordon USA

Main Category PLC

Sub Category DECENTRALISED PROGRAMMABLE CONTROLLERS (PLC)

No Contractor Name Location Limitations/Conditions

7945 ABB INSTRUMENTATION PERO, IT

8011 ALSTOM POWER E.C.S. France & Italy

Wednesday, March 11, 2020 Page 166 of 304

8009 GENERAL ELECTRIC -FANUC USA

8008 SIEMENS-SIMATIC Germany

8010 SCHNEIDER ELECTRIC -MODICON France & USA

7594 ALLEN BRADLEY (ROCKWELL USA

AUTOMATION)

11555 Yokogawa Saudi Arabia Company Saudi Arabia

Main Category Pressure Vessel

Sub Category FEEDWATER TANK AND DEAERATOR

No Contractor Name Location Limitations/Conditions

10453 WOOYANG HC CO.,LTD Korea

Wednesday, March 11, 2020 Page 167 of 304

10685 SEDAE ENERTECH Korea

11613 STORK THERMAQ B. V Netherlands

4856 AL-ZAMIL HEAVY INDUSTRIES Saudi Arabia

11933 SEWON CELLONTECH Korea As a fabrication shop only.

9587 TSM Tech Co., Ltd. Korea

12026 Posco plantec Korea

Wednesday, March 11, 2020 Page 168 of 304

10292 S&T Corporation Korea •Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
•All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
•All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

10174 Energyen Corporation Korea

10169 DBI Corporation Korea

10077 GS Entec Corp. Korea •All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
•Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
•All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
•All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

10075 Daechang HRSG Corporation Korea

Wednesday, March 11, 2020 Page 169 of 304

9896 Tech International FZC UAE As fabrication shop only

8742 BHI Korea

4862 ARABIAN INTERNATIONAL CO. Saudi Arabia

4691 Mitsubishi Hitachi Power Systems (MHPS) Japan

5131 ALSTOM HEAT EXCHANGE Hungary

Sub Category PRESSURE VESSEL

No Contractor Name Location Limitations/Conditions

12027 Posco plantec Korea

Sub Category PRESSURE VESSEL: CARBON STEEL AND LOW ALLOY, WALL THICKNESS FROM
38 MM THRU 76 MM(1.5 THRU 3 IN)
No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 170 of 304

4805 TAYLOR FORGE ENGINEERED SYSTEMS, Paola, KS
INC.

4785 OLMI Italy

4810 STAHL-UND APPARATEBAU HANS LEFFER G Germany

4818 CHIYODA PROTECH CORPORATION Japan

9801 Tech International FZC United Arab

Emirates

10180 AL ZAMIL HEAVY INDUSTRIES LIMITED Saudi Arabia Stainless Steel, Design Pressure: 7 bar,
Dia:2550mm, length:17375mm and
thickness up to 48mm made as per
ASME as per division I & II
- Carbon Steel as per ASME VIII Div 1 & 2.

11015 INCO International Oman

Wednesday, March 11, 2020 Page 171 of 304

11048 BERTSCH Energy Bludenz , Austria

4669 BABCOCK ENERGY LTD. United Kingdom

4594 BILFAL Heavy Industries Ltd Saudi Arabia

4703 HYUNDAI HEAVY INDUSTRIES CO., LTD. Korea

4695 HITACHI ZOSEN Japan

4688 HITACHI LTD. Japan

4609 MARITIME INDUSTRIAL SERVICES UAE

Wednesday, March 11, 2020 Page 172 of 304

4614 OLAYAN DESCON ENGINEERING COMPANY Saudi Arabia

4621 RAMSIS ENGINEERING Bahrain

4634 AL-ZAMIL COMPANY FOR HEAVY STEEL Saudi Arabia

4642 ESCHER HOLLAND B.V Netherlands

4649 FBM – HUDSON ITALIANA SPA Italy

4654 GENIUS VOS BV Netherlands

4800 ATB CALDERERIA SPA Italy

Wednesday, March 11, 2020 Page 173 of 304

4664 LINDE A.G. PROCESS ENG.& CONTRACTING Germany

4803 GENERAL WELDING WORKS, INC USA

4677 SANTAZ-CENSA S.A. Porrino-

Pontevedra, Spain

4710 KAWASAKI HEAVY IND., LTD. Japan

4725 DOOSAN HEAVY INDUSTRIES AND Korea

CONSTRUCTION CO. LTD.

4734 SUMITOMO HEAVY INDUSTRIES, LTD. Japan

4741 AALBORG CISERV INTERNATIONAL A/S Denmark

Wednesday, March 11, 2020 Page 174 of 304

4753 DOOSAN MECATEC CO. LTD. Korea

4757 Mitsubishi Hitachi Power Systems (MHPS) Japan

4774 KOBE STEEL LIMITED Japan

4780 MB FABRICATORS United Kingdom

9867 BHI Korea

4794 ISHIKAWAJIMA-HSRIMA HEAVY Japan

INDUSTRIES CO.

11654 Cimtas Celik Imalat Montaj Turkey

Wednesday, March 11, 2020 Page 175 of 304

4659 IMS SPA INDUSTRIE MECCANICHE Italy
SCARDELLATO SPA

11964 GULF STEEL WORKS Saudi Arabia

12045 Nesma Havatek Industrial Co. Saudi Arabia - Limitation:-

ForGeneration Engineering and project
Sector.

-Conditions:-
ForBlow down Tank Atmospheric &
Vacuum condensate Tank.

4820 NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

11747 GEYAD FACTORY FOR PRESSURE VESSELS Saudi Arabia

AND STEEL STRUC

Sub Category PRESSURE VESSEL: CARBON STEEL AND LOW ALLOY, WALL THICKNESS
GREATER THAN 76 MM (3 IN)
No Contractor Name Location Limitations/Conditions
4819 CHIYODA PROTECH CORPORATION Japan

Wednesday, March 11, 2020 Page 176 of 304

4754 DOOSAN MECATEC CO. LTD. Korea

4758 Mitsubishi Hitachi Power Systems (MHPS) Japan

4775 KOBE STEEL LIMITED Japan

4781 MB FABRICATORS United Kingdom

4786 OLMI Italy

4795 ISHIKAWAJIMA-HSRIMA HEAVY Japan

INDUSTRIES CO.

4797 LARSEN AND TOUBRO LIMITED India

Wednesday, March 11, 2020 Page 177 of 304

4801 ATB CALDERERIA SPA Italy

4746 NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

4811 STAHL-UND APPARATEBAU HANS LEFFER G Germany

4822 IMS INDUSTRIE MECCANICHE Italy

SCARDELLATO SPA

4821 OFFICINE LUIGI-RESTA S.P.A. Italy

9868 BHI Korea

11049 BERTSCH Energy Bludenz , Austria

Wednesday, March 11, 2020 Page 178 of 304

11719 Nash Engineering Fzco United Arab
Emirates

4806 TAYLOR FORGE ENGINEERED SYSTEMS, Paola, KS

INC.

4643 ESCHER HOLLAND B.V Netherlands

4696 HITACHI ZOSEN Japan

4595 BILFAL Heavy Industries Ltd Saudi Arabia

4735 SUMITOMO HEAVY INDUSTRIES, LTD. Japan

4689 HITACHI Japan

Wednesday, March 11, 2020 Page 179 of 304

10080 S&T Corporation Korea •Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
•All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
•All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

4650 FBM – HUDSON ITALIANA SPA Italy

4670 BABCOCK ENERGY LTD. United Kingdom

4678 SANTAZ-CENSA S.A. Porrino-

Pontevedra, Spain

4704 HYUNDAI HEAVY INDUSTRIES CO., LTD. Korea

4711 KAWASAKI HEAVY IND., LTD. Japan

Wednesday, March 11, 2020 Page 180 of 304

4726 DOOSAN HEAVY INDUSTRIES AND Korea
CONSTRUCTION CO. LTD.

4730 MARITIME INDUSTRIAL SERVICES. Sharjah, UAE

Sub Category PRESSURE VESSEL: NOT OTHERWISE LISTED (PROCESS DESIGNERS,

RECTANGULAR VESSELS, SMALL POTS, ETC.)
No Contractor Name Location Limitations/Conditions
4826 HASON STEEL PRODUCTS, INC. Canada

4736 SUMITOMO HEAVY INDUSTRIES, LTD. Japan

4759 Mitsubishi Hitachi Power Systems (MHPS) Japan

4771 ENPRO SYSTEMS. INC. USA

4807 TAYLOR FORGE ENGINEERED SYSTEMS, Paola , KS

INC.

Wednesday, March 11, 2020 Page 181 of 304

4665 LINDE A.G. PROCESS ENG.& CONTRACTING Germany

4812 STAHL-UND APPARATEBAU HANS LEFFER G Germany

4824 KCC PROCESS EQUIPMENT, LTD. United Kingdom

4655 GENIUS VOS BV Netherlands

4827 NATCO, DIV. OF NATIONAL TANK CO. USA

4828 Peerless Mfg Co. Wichita Falls, TX

4830 PERRY EQUIPMENT CORPORATION (PECO) Mineral Wells, TX

Wednesday, March 11, 2020 Page 182 of 304

4823 IMS INDUSTRIE MECCANICHE Italy
SCARDELLATO SPA

4831 TECHNOTHERM CORPORATION Tulsa, OK

4671 BABCOCK ENERGY LTD. United Kingdom

4651 FBM – HUDSON ITALIANA SPA Italy

4958 CAMPI Italy

4605 GULF ENGINEERING CO. FOR HEAT Saudi Arabia

EXCHANGERS

4835 DOOSAN HEAVY INDUSTRIES AND Korea

CONSTRUCTION CO. LTD.

Wednesday, March 11, 2020 Page 183 of 304

4610 MARITIME INDUSTRIAL SERVICES UAE

4622 RAMSIS ENGINEERING Bahrain

4625 AL-SAGHYIR STEAM BOILERS C. Saudi Arabia

4635 AL-ZAMIL COMPANY FOR HEAVY STEEL Saudi Arabia

11050 BERTSCH Energy Bludenz , Austria

Sub Category PRESSURE VESSEL: CARBON STEEL, MAX. WALL THICKNESS OF 19 MM (0.75
IN).
No Contractor Name Location Limitations/Conditions
4608 MARITIME INDUSTRIAL SERVICES UAE

10689 HIDADA Company Saudi Arabia For Applications Up to 20 Bar and 150
Cᴼ only.

Wednesday, March 11, 2020 Page 184 of 304

4591 BILFAL Heavy Industries Ltd Saudi Arabia

4597 DEUTCHE BABCOCK UAE

11685 TSM Arabia Saudi Arabia 10 years extended warrantee.

10887 Al Zamil Metal Works Factory Saudi Arabia ASME Carbon Steel pressure vessel up to
3.5 Bar and the connected piping.

4631 AL-ZAMIL COMPANY FOR HEAVY STEEL Saudi Arabia

4626 GULF STEEL WORKS Saudi Arabia

4611 OLAYAN DESCON ENGINEERING COMPANY Saudi Arabia

Wednesday, March 11, 2020 Page 185 of 304

4607 MARITIME INDUSTRIAL SERVICES CO., LTD. Saudi Arabia
(MIS) ARABI

4606 GULF MARINE MAINTENANCE & UAE

OFFSHORE SERVICES (GMMOS

4603 GULF ENGINEERING CO. FOR HEAT Saudi Arabia

EXCHANGERS

4600 GEYAD FACTORY FOR PRESSURE VESSELS Saudi Arabia

AND STEEL STRUC

4624 AL-SAGHYIR STEAM BOILERS C. Saudi Arabia

4619 RAMSIS ENGINEERING Bahrain

4628 YANBU STEEL CO. Saudi Arabia

Wednesday, March 11, 2020 Page 186 of 304

 Sub Category PRESSURE VESSELS: CARBON STEEL AND LOW ALLOY, MAX. WALL THICKNESS
OF 38 MM (1.5 IN)
No Contractor Name Location Limitations/Conditions
4727 GULF MARINE MAINTENANCE & UAE
OFFSHORE SERVICES (GMMOS

4782 WELLMAN ROBEY United Kingdom

4783 OLMI Italy

4792 ISHIKAWAJIMA-HSRIMA HEAVY Japan

INDUSTRIES CO.

4667 BABCOCK ENERGY LTD. United Kingdom

10171 DBI Corporation Korea

11052 BERTSCH Energy Bludenz , Austria

Wednesday, March 11, 2020 Page 187 of 304

11676 Arabian Gulf Metal Factory Saudi Arabia

4778 MB FABRICATORS United Kingdom

4728 MARITIME INDUSTRIAL SERVICES. Sharjah, UAE

4791 GENERAL WELDING WORKS, INC USA

4723 DOOSAN HEAVY INDUSTRIES AND Korea

CONSTRUCTION CO. LTD.

4686 HITACHI LTD. Japan

4740 AALBORG CISERV INTERNATIONAL A/S Denmark

Wednesday, March 11, 2020 Page 188 of 304

4683 SAUDER CUSTOM FABRICATION, INC. Emporia, KS

4675 SANTAZ-CENSA S.A. Porrino-

Pontevedra, Spain

4653 GENIUS VOS BV Netherlands

4661 STAHL-UND APPARATEBAU HANS LEFFER Germany

GMBH

4663 LINDE A.G. PROCESS ENG.& CONTRACTING Germany

4732 SUMITOMO HEAVY INDUSTRIES, LTD. Japan

4744 NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

Wednesday, March 11, 2020 Page 189 of 304

4702 HYUNDAI HEAVY INDUSTRIES CO., LTD. Korea

4592 BILFAL Heavy Industries Ltd Saudi Arabia

4598 DEUTCHE BABCOCK UAE

4755 Mitsubishi Hitachi Power Systems (MHPS) Japan

8963 Unimit Engineering Thailand

4751 DOOSAN MECATEC CO. LTD. Korea

4772 KOBE STEEL LIMITED Japan

Wednesday, March 11, 2020 Page 190 of 304

4750 KAWASAKI HEAVY IND. LTD. Japan

4770 ENPRO SYSTEMS. INC. USA

4747 IMS INDUSTRIE MECCANICHE Italy

SCARDELLATO SPA

4604 GULF ENGINEERING CO. FOR HEAT Saudi Arabia

EXCHANGERS

4612 OLAYAN DESCON ENGINEERING COMPANY Saudi Arabia

4620 RAMSIS ENGINEERING Bahrain

4629 YANBU STEEL CO. Saudi Arabia

Wednesday, March 11, 2020 Page 191 of 304

4632 AL-ZAMIL COMPANY FOR HEAVY STEEL Saudi Arabia

4693 HITACHI ZOSEN Japan

4640 ESCHER HOLLAND B.V Netherlands

4645 ROLLE SPA Italy

4647 FBM – HUDSON ITALIANA SPA Italy

4748 WARNER LEWIS INDUS. FILTER GMBH Germany

Sub Category PRESSURE VESSELS: STAINLESS STEEL (SS) AND OTHER HIGH ALLOYS, NON-
FERROUS STEELS
No Contractor Name Location Limitations/Conditions
4633 AL-ZAMIL COMPANY FOR HEAVY STEEL Saudi Arabia

Wednesday, March 11, 2020 Page 192 of 304

11965 GULF STEEL WORKS Saudi Arabia

4658 IMS SPA INDUSTRIE MECCANICHE Italy

SCARDELLATO SPA

4641 ESCHER HOLLAND B.V Netherlands

4613 OLAYAN DESCON ENGINEERING COMPANY Saudi Arabia

4593 BILFAL Heavy Industries Ltd Saudi Arabia

4694 HITACHI ZOSEN Japan

4687 HITACHI LTD. Japan

Wednesday, March 11, 2020 Page 193 of 304

4684 SAUDER CUSTOM FABRICATION, INC. Emporia, KS

4733 SUMITOMO HEAVY INDUSTRIES, LTD. Japan

4648 FBM HUDSON Italy

4804 TAYLOR FORGE ENGINEERED SYSTEMS, Paola, KS

INC.

11912 Nash Engineering Fzco United Arab

Emirates

11875 INCO International Oman

11323 GE Nuovo Pignone SPA Italy Only For :

Capacity up to 2000 ton and 200 mm
thickness.

Wednesday, March 11, 2020 Page 194 of 304

11030 Unimit Engineering Thailand

11022 BERTSCH Energy Bludenz , Austria

4817 NIPPON SANSO K.K. Japan

4816 ENPRO SYSTEMS. INC. USA

4815 LINDE A.G. PROCESS ENG. & CONTRACTING Germany

4724 DOOSAN HEAVY INDUSTRIES AND Korea

CONSTRUCTION CO. LTD.

4808 TAKAHASHI IRON WORKS CO. LTD. Japan

Wednesday, March 11, 2020 Page 195 of 304

4668 BABCOCK ENERGY LTD. United Kingdom

4802 GENERAL WELDING WORKS, INC USA

4799 ATB CALDERERIA SPA Italy

4729 MARITIME INDUSTRIAL SERVICES. Sharjah, UAE

4676 SANTAZ-CENSA S.A. Porrino-

Pontevedra,Spain

4809 STAHL-UND APPARATEBAU HANS LEFFER G Germany

4709 KAWASAKI HEAVY IND., LTD. Japan

Wednesday, March 11, 2020 Page 196 of 304

4796 LARSEN AND TOUBRO LIMITED India

4745 NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

4749 WARNER LEWIS INDUS. FILTER GMBH Germany

4752 DOOSAN MECATEC CO. LTD. Korea

4756 Mitsubishi Hitachi Power Systems (MHPS) Japan

4773 KOBE STEEL LIMITED Japan

4779 MB FABRICATORS United Kingdom

Wednesday, March 11, 2020 Page 197 of 304

4784 OLMI Italy

4793 ISHIKAWAJIMA-HSRIMA HEAVY Japan

INDUSTRIES CO.

Main Category Process Skid Packages

Sub Category Chemical Injection Skid

No Contractor Name Location Limitations/Conditions

11966 GULF STEEL WORKS Saudi Arabia

11926 GEYAD FACTORY FOR PRESSURE VESSELS Saudi Arabia - Fabrication shope only, Engineering &
AND STEEL STRUC design must be done by approved
engineering office.

11913 Nash Engineering Fzco United Arab

Emirates

Wednesday, March 11, 2020 Page 198 of 304

11734 SEKO Middle East FZE SPA United Arab As fabrication shop only.
Emirates Condition:- All Design works Warranty
by SEKO Italy.

11568 Asco Pompe s.r.l. Italy

11269 SEKO SPA, Italy Italy

11114 Baric SYSTEMS Middle East Ltd. Saudi Arabia

Sub Category Fuel Skid

No Contractor Name Location Limitations/Conditions

11309 Woojin INC Korea Engineering and design must be done by
SEC approved Engineering office.

10668 SAMPI S.p.A. Italy Excluding Fuel Gas System Skids.

Wednesday, March 11, 2020 Page 199 of 304

11505 John Crane Indufill B.V Netherlands - For Generartion Engineering and
Project Sector.

11925 GEYAD FACTORY FOR PRESSURE VESSELS Saudi Arabia - Fabrication shope only, Engineering &
AND STEEL STRUC design must be done by approved
engineering office.

10096 ZAMIL STEEL INDUSTRIES PED Saudi Arabia Fuel oil Skid

10760 Baric SYSTEMS Middle East Ltd. Saudi Arabia Fuel oil Skid

11299 Zamil Steel Co. Saudi Arabia Gas Fuel Handling Skid

11482 Process Group International United Arab

Emirates

11620 Nash Engineering Fzco United Arab None.

Emirates

Wednesday, March 11, 2020 Page 200 of 304

11713 GULF STEEL WORKS Saudi Arabia

11852 Cimtas Celik Imalat Montaj Turkey

9239 Integrated Flow Solutions USA For Following :1. Fuel oil (Unloading /
Transfer) Skids
Packages(unloading,transfer,forwarding
and heating skids)2. Fuel Gas System
Skids Packages for Natural Gas cleaning
and conditioning

Sub Category Water Injection Skid

No Contractor Name Location Limitations/Conditions

11113 Baric SYSTEMS Middle East Ltd. Saudi Arabia

Main Category Protective Relays

Sub Category RELAY & CONTROL PANEL

No Contractor Name Location Limitations/Conditions

6575 HAWA ELECTRIC PANEL Saudi Arabia

Wednesday, March 11, 2020 Page 201 of 304

7411 MOHD. AL-OJAIMI LTD. Saudi Arabia

10948 USSG Energy Insight Saudi Arabia

9886 JAL INTERNATIONAL Saudi Arabia 1-Up to 132KV

2-Extended warranty in respect of
defects due to
Desgine,manufacturing,and
workmanship for ten years for the first
project & susbsequently redused yearly
for onwards projects.
3-Subject to technical evaluation fo
acceptance to each project.

7415 TIEPCO Saudi Arabia

7409 AL-FANAR ELECTRICAL SYSTEM Saudi Arabia UP TO 132kV ONLY, IP41 TYPE TEST IS
REQUIRED IN FIRST SUPPLY.

6712 ETA-PCS UAE Type/design, special, routine tests shall

be performed for first project at an
independent laboratory in the presence
of 3rd party & 3 SEC Engineers.
Extended warranty for 10 years.

Wednesday, March 11, 2020 Page 202 of 304

6710 EPS LTD. Saudi Arabia

6700 WESCOSA Saudi Arabia

6598 ABB/AEIL Saudi Arabia

6694 VA TECH Saudi Arabia

6576 REMAL FACTORY Saudi Arabia

Main Category Reactors

Sub Category 110 KV TO 132 KV REACTORS

No Contractor Name Location Limitations/Conditions

6606 AREVA France

Wednesday, March 11, 2020 Page 203 of 304

6640 JAPAN AE POWER SYSTEMS CORP. Japan

6684 TMT&D CORP. Japan

6792 Siemens Transformers Austria GmbH & Co Weiz, Austria

KG

6816 TRAFO-UNION (SIEMENS) Germany

6486 ABB SWEDEN

Sub Category 230 KV AIR CORE REACTORS

No Contractor Name Location Limitations/Conditions

6840 ALSTOM (T & D) BALTEAU SA (NV) Belgium

Sub Category 230 KV OIL IMMERSED REACTORS

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 204 of 304

6817 TRAFO-UNION (SIEMENS) Germany

6685 TMT&D CORP. Japan

6641 JAPAN AE POWER SYSTEMS CORP. Japan

6607 AREVA France

6585 ABB ( T& D) USA

6487 ABB SWEDEN

Sub Category 33 KV TO 69 KV OIL IMMERSED REACTORS

No Contractor Name Location Limitations/Conditions

6683 TMT&D CORP. Japan

Wednesday, March 11, 2020 Page 205 of 304

6791 Siemens Transformers Austria GmbH & Co Austria
KG

5064 SIEMENS Germany

6485 ABB SWEDEN

6605 AREVA France

6639 JAPAN AE POWER SYSTEMS CORP. Japan

6815 TRAFO-UNION (SIEMENS) Germany

Sub Category 380 KV OIL IMMERSED REACTORS

No Contractor Name Location Limitations/Conditions

6488 ABB SWEDEN

Wednesday, March 11, 2020 Page 206 of 304

6642 JAPAN AE POWER SYSTEMS CORP. Japan

6686 TMT&D CORP. Japan

6818 TRAFO-UNION (SIEMENS) Germany

6793 Siemens Transformers Austria GmbH & Co Weiz, Austria

KG

6608 AREVA France

Main Category SDMS

Sub Category Energy Storge Technology

No Contractor Name Location Limitations/Conditions

12127 Advanced Electronics Company AEC Saudi Arabia - Condition :- For IPP & Renewable
Energy Projects.

Limitation:- Rated output power :0.5

MVA up to 3.3 MVA.

Wednesday, March 11, 2020 Page 207 of 304

Main Category Service Gases

Sub Category CO2 PLANT

No Contractor Name Location Limitations/Conditions

6348 AT&V Saudi Arabia

6347 SIGAS Saudi Arabia

6346 AHG Saudi Arabia

Sub Category HYDROGEN GENERATION AND STORAGE

No Contractor Name Location Limitations/Conditions

9416 Daiki Ataka Engineering Co., Ltd Japan Model No./Capacity (Nm3/h)
HS0810 / 10
HS0830 / 30
HS0860 / 60

6468 TELEDYNE USA

Wednesday, March 11, 2020 Page 208 of 304

8912 Proton Energy Systems USA -H&C Series hydrogen generators.
-Stable Flow units.

6467 Hydrogenics Co. Canada \ Belgium

Main Category Steam Turbine

Sub Category STEAM TURBINE & GENERATOR

No Contractor Name Location Limitations/Conditions

6544 ALSTOM POWER Belfort, France Engineering must be done in Germany
/Chattanooga,
USA/Mannheim,Ger
many

11253 GE Nuovo Pignone SPA Italy Only for :

A5, A9 series, SG series, SDF series,
MP/MC series,

10214 ALSTOM POWER Poland Engineering must be done by Alstom

Power in Germany.

Wednesday, March 11, 2020 Page 209 of 304

8959 DOOSAN /SKODA POWER Czech Republic Model MTD40C,MTD50 and MTD60
with a maximum LSB of 27” only

8671 Fuji Electric Co, Ltd Japan •(Reheat Steam ) HMN Series – Three
& four cylinder type Output Range 200
MW – 350 MW
•(Reheat Steam ) KN Series – 2 casing
combined HP and IP and separate LP
Turbine. Output range 100MW -350MW
•(Reheat Steam ) SCRH – Single Casing
axial Exhaust for Combined Cycle Power
Plant. Output Range 80-160 MW.
•(Reheat Steam ) FET – R - Single
Casing axial Exhaust for Combined Cycle
Power Plant Output Range 50-120 MW.
•(Non-Reheat Steam ) FET + N – Two
casing, separate LP Turbine, for
Combined Cycle Power Plant Output
Range 75-250 MW
•(Non-Reheat Steam ) FET – Single
Casing Turbine for Combined Cycle
Power Plant Output Range 20-230 MW.

6554 DOOSAN HEAVY INDUSTRIES AND Korea - LTSA shall be provided for sub-critical
CONSTRUCTION CO. LTD. SteamTurbine.

6539 SIEMENS Goerlitz &

Munlheim,
Germany/Charlotte,
USA

Wednesday, March 11, 2020 Page 210 of 304

6538 TOSHIBA CORPORATION Japan

5104 Mitsubishi Hitachi Power Systems (MHPS) Japan

139 General Electric (GE) USA

8461 ANSALDO ENERGIA S.p.A. Italy Up to 350 MW for 60 Hz

Models: (
MT5/10,MT15,MT20,and RT20/30)

Sub Category STEAM TURBINE NON-RETURN VALVES

No Contractor Name Location Limitations/Conditions

5119 Adams Armaturen GmbH Germany

5125 SEMPELL Germany

Main Category Structural Steel

Wednesday, March 11, 2020 Page 211 of 304

 Sub Category Structural Steel Erection For ST Hall, pipe rack, HV Cable rack, electrical and
control building and Misc.
No Contractor Name Location Limitations/Conditions
8229 SAUDI METIN Saudi Arabia

8230 Al Zamil Heavy Ind Saudi Arabia

11104 Al Reyami Steel Construction United Arab None

Emirates

11889 SINSINA Corner Company For Contracting Saudi Arabia Equipment Buildings, ST Hall,
Pump House, Electrical and
control Building, cable racks ets.

11927 GEYAD FACTORY FOR PRESSURE VESSELS Saudi Arabia

AND STEEL STRUC

11930 Isam Kabbani for Metal Fabrication Fulaz Saudi Arabia Excluding ST Hall.
Factory C

Wednesday, March 11, 2020 Page 212 of 304

11934 Arabian Metal Products Organization Saudi Arabia Equipment Buildings , ST Hall , pump
(AMPO) house, Electrical and control None
Building, cable racks etc.

12003 RAMZ FACTORY FOR METAL INDUSTRIES Saudi Arabia - Excluding ST hall

12018 Al Shahin Metal Industries Saudi Arabia

8162 ARABIAN INTERNATIONAL CO. (AIC) Saudi Arabia

8163 SHAMRANY INDUSTRIAL GROUP/BOURNE Saudi Arabia

8136 HIDADA LTD. Saudi Arabia

8160 Zamil Structural Steel Co Saudi Arabia

Main Category STRUCTURAL STEEL / PRE-ENGINEERED BUILDINGS

Wednesday, March 11, 2020 Page 213 of 304

 Sub Category STRUCTURAL STEEL / PRE-ENGINEERED BUILDINGS

No Contractor Name Location Limitations/Conditions

10460 BEMCO Steel Industries (BSI) Saudi Arabia

11851 Al Zamil Metal Works Factory Saudi Arabia Non

11833 Attas Factory Co. (AFCO) Steel Saudi Arabia -Limitation:-

For Generartion Projects.

-Condition:-
For BOP Area.

11705 Mabani Steel United Arab -Pre Engineered Buildings.

Emirates

11130 Al Shahin Metal Industries Saudi Arabia

10992 INCO International United Arab

Emirates

Wednesday, March 11, 2020 Page 214 of 304

10991 Young Hwa (RAK) United Arab Only For : Ducting & Casing
Emirates

10799 SHARQ FACTORY Saudi Arabia Non Industrial Buildings.

11911 International Building Systems Factory Saudi Arabia

(IBSF)

10586 EMIRATES Building System CO.LLC. (EBS) UAE

8127 SAUDI METAL COATING CO. Ltd. Saudi Arabia

9131 Energya Steel Solutions Saudi Arabia All engineering and design works to be
done by the EPC contractor

8128 ARABIAN INTERNATIONAL CO. (AIC) Saudi Arabia

Wednesday, March 11, 2020 Page 215 of 304

8126 Al Zamil Heavy Ind Saudi Arabia

8123 HIDADA LTD. Saudi Arabia

8043 Zamil Structural Steel Co Saudi Arabia

4904 ARABIAN INTERNATIONAL CO. (AIC) Saudi Arabia

4867 SAUDI METIN Saudi Arabia

10683 Al Shafar Steel Engineering LLC (ASSENT) UAE

8124 SAUDI BUILDING SYSTEM Saudi Arabia

Main Category Subcontractor

Wednesday, March 11, 2020 Page 216 of 304

 Sub Category STEEL ERECTION WORK

No Contractor Name Location Limitations/Conditions

10715 ARABIAN INTERNATIONAL CO. (AIC) Saudi Arabia

Main Category Substation Equipment

Sub Category CIRCUIT BREAKER, OUTDOOR, 34.5 KV TO 230 KV

No Contractor Name Location Limitations/Conditions

5075 ALSTOM USA

6577 ABB POWER T & D CO. USA

6578 SIEMENS POWER T&D USA

Sub Category CIRCUIT SWITCHER, 69 –230 KV

No Contractor Name Location Limitations/Conditions

6649 S&C Canada

Wednesday, March 11, 2020 Page 217 of 304

6663 SIEMENS Germany

Sub Category DEADTANK SF6 BREAKERS, 230 KV

No Contractor Name Location Limitations/Conditions

6612 AREVA USA

6646 JAPAN AE POWER SYSTEMS CORP. Japan

6690 TMT&D CORP. Japan

7342 GE-HITACHI HVB USA

6588 ABB ( T& D) USA

Sub Category DEADTANK SF6 BREAKERS, 69 KV

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 218 of 304

6688 TMT&D CORP. Japan

6644 JAPAN AE POWER SYSTEMS CORP. Japan

6610 AREVA USA

6586 ABB ( T& D) USA

7340 GE-HITACHI HVB USA

Sub Category DEADTANK SF6 BREAKERS,110 - 132 KV

No Contractor Name Location Limitations/Conditions

6689 TMT&D CORP. Japan

7341 GE-HITACHI HVB USA

Wednesday, March 11, 2020 Page 219 of 304

6660 SIEMENS USA

6645 JAPAN AE POWER SYSTEMS CORP. Japan

6503 ABB Switzerland

6587 ABB ( T& D) USA

6611 AREVA USA

Sub Category LIVE TANK, 110 – 132KV, 230KV & 23KV SF6 BREAKER

No Contractor Name Location Limitations/Conditions

6505 ABB SWEDEN

6662 SIEMENS Germany

Wednesday, March 11, 2020 Page 220 of 304

6614 AREVA France

Sub Category LIVE TANK, 69 KV SF6 BREAKER

No Contractor Name Location Limitations/Conditions

6613 AREVA France

6504 ABB SWEDEN

7343 ABB SWITCHGEAR AB SWEDEN,

LUDUVIKA

6661 SIEMENS Germany

Sub Category LOAD BREAK SWITCHES UPTO 34.5 KV

No Contractor Name Location Limitations/Conditions

6597 ABB/AEIL Saudi Arabia

Wednesday, March 11, 2020 Page 221 of 304

6615 AREVA France

6648 KONCAR CROATIA

6664 SIEMENS Germany

6709 EPS LTD. Saudi Arabia

7346 FRITZ DRIESCHER Germany

7165 HITACHI Japan

Sub Category LONG ROD PORCELAIN INSULATORS UP TO 380 KV

No Contractor Name Location Limitations/Conditions

7198 PPC INSULATORS Germany

Wednesday, March 11, 2020 Page 222 of 304

7207 LAPP Germany

6658 SIEMENS Germany

7210 NGK Japan

Sub Category MOBILE S/S, 110 - 132 /13.8KV

No Contractor Name Location Limitations/Conditions

7466 ABB/ADDA Italy

6677 SIEMENS Germany

6518 ABB SWEDEN

Sub Category SURGE ARRESTERS, STATION CLASS UP TO 380 KV

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 223 of 304

7329 ABB HV TECHNOLOGIES Switzerland

7338 ALSTOM T&D France, United

Kingdom

7339 AE POWER Japan

6659 SIEMENS Germany

6609 AREVA France

7332 BOWTHORPE United Kingdom

7333 COOPER (MCGRAW-ED) USA

Wednesday, March 11, 2020 Page 224 of 304

7336 OHIO BRASS USA

6643 JAPAN AE POWER SYSTEMS CORP. Japan

7337 TRIDELTA Germany

7335 ELPRO INTL. LTD India

6687 TMT&D CORP. Japan

6502 ABB Germany

Sub Category UNIT SUBSTATION, 69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY

No Contractor Name Location Limitations/Conditions

6808 CG Power Systems Belgium NV/ Mechelen Belgium
Plant

Wednesday, March 11, 2020 Page 225 of 304

6838 ABB (BBC SECHERON) Switzerland,
GENEVA

Main Category SUBSTATION STEEL STRUCTURE (LATTICED)

Sub Category SUBSTATION STEEL STRUCTURE (LATTICED)

No Contractor Name Location Limitations/Conditions

7272 GEYAD FOR COMMERCE & IMPORT CO. Saudi Arabia
LTD.

7267 AL ZAMIL STEEL Saudi Arabia

7273 HIDADA LTD. Saudi Arabia

7279 NAJEM Saudi Arabia

7269 ARABIAN INTERNATIONAL CO. (AIC) Saudi Arabia

Wednesday, March 11, 2020 Page 226 of 304

7264 AL BABTAIN Saudi Arabia

Main Category Supply of Non-OEM Gas Turbine Hot Gas Path Parts

Sub Category 2.11 Supply of Non-OEM Blades & HGP Parts

No Contractor Name Location Limitations/Conditions

12227 Combustion parts Inc. usa 1- GE Fr 7FA. 03: Transition pieces,
Combustion Liner & liner caps only.
2- GE Fr 7FA. 04: Transition pieces,
Combustion Liner & liner caps only, if
sample provided by SEC.

Main Category Switchgears

Sub Category AC & DC DIST. PANELS

No Contractor Name Location Limitations/Conditions

8837 AL-FANAR ELECTRICAL SYSTEM Saudi Arabia UP TO 5000A AC & 250A DC

643 WESCOSA Saudi Arabia ONLY TYPES SAS 600/2000/5000 AND

MUST BE EQUIPPED WITH HINGED REAR
DOORS FACTORY: DAMMAM

Wednesday, March 11, 2020 Page 227 of 304

9023 ELECTRICAL PANEL BOARD Saudi Arabia
FACTORY/HAWA TRADING

9024 EPS (GROUPE SCHNEIDER) Saudi Arabia

9026 MOHAMMAD AL –OJAIMI FACTORY Saudi Arabia

9027 MUSAID SWITCHGEAR Saudi Arabia

9028 REMAL Saudi Arabia

9029 SIEMENS Saudi Arabia

11239 Nour Industries Saudi Arabia using Siemens SIVACON Software.

Wednesday, March 11, 2020 Page 228 of 304

8841 ETA-PCS UAE For :1600A/380V(indoor) :
Extended warranty for 10 years.

9022 EAST & WEST FACTORY Saudi Arabia

9020 ABB/AEIL Saudi Arabia

10599 USSG Energy Insight Saudi Arabia

Sub Category DC SWITCHBOARD

No Contractor Name Location Limitations/Conditions

9012 GE Saudi Arabia None

9011 SCHNEIDER ELECTRIC Saudi Arabia None

9010 ABB Saudi Arabia None

Wednesday, March 11, 2020 Page 229 of 304

 Sub Category Generator circuit breaker

No Contractor Name Location Limitations/Conditions

8076 SIMENES Germany

8074 ABB Switzerland

8075 ALSTOM Grid France

Sub Category METAL CLAD SWITCHGEAR, INDOOR, LOW-VOLTAGE

No Contractor Name Location Limitations/Conditions

11671 ARABIA ELECTRIC, LTD. (Equipment) Saudi Arabia LIMITATIONS:
- Sivacon S8 Type.
- Up to 6300A, 100KA
CONDITIONS:
- NIL

8993 GENERAL ELECTRIC USA Type AKD

8996 SIEMENS ENERGY AND AUTOMATION USA Type R/RL

Wednesday, March 11, 2020 Page 230 of 304

8997 SQUARE D USA Class 6035 Cutler-Hammer

8998 WESCOSA Saudi Arabia Type DSII (Under License to Cutler-

Hammer)

9154 Hyundai Electric & Energy Systems Co.,Ltd. Korea

11514 Electronic & Electrical Industries Corp. Saudi Arabia for switchgear :SEN Plus 1600A, 2000A,
(EEIC) 3200A, 4000A, 5000A and 6400A.
Air Circuit Breaker: EntelliGuard type, GE
Poland.
MCCB: Record Plus type, GE Poland.

For Motor control center : SEN Plus

1600A, 2000A, 3200A and 4000A.
Maximum operation current on the
main bus bar: 3500A at 40°C.
Air Circuit Breaker: EntelliGuard type, GE
Poland.
MCCB: Record Plus type, GE Poland.

8992 ELECTRICAL POWER DISTRIBUTION Saudi Arabia None

BOARDS & SWITCHGEA

Wednesday, March 11, 2020 Page 231 of 304

12006 Wahah Electric Supply Company of SA LTD Saudi Arabia
(WESCOSA)

9273 Nour Industries Saudi Arabia - Siemens Sivacon.

- Ten (10) Years extended warranty.

8991 CUTLER-HAMMER USA Type DSII

8987 ABB POWER T & D COMPANY USA K-Line

8988 ABB ELECTRICAL IND. CO., LTD. (AEIL) Saudi Arabia ABB K-Line (Under License from ABB) ,
Siemens Type R/RL

8995 POINT EIGHT POWER USA Cutler-Hammer DSII breaker assembly

Wednesday, March 11, 2020 Page 232 of 304

8990 ARABIAN POINT EIGHT POWER Saudi Arabia LIMITATION:
- Sen Plus model, Up 4000 A, 80 kA.
- Make: GE Poland.
Conditions:
Extended (10) years warranty for first
order of each rating.

8921 ABB Saudi Arabia -LV Switchgear (MNS Series ).

Sub Category METAL CLAD SWITCHGEARS: 13.8 kV UP TO 34.5 kV

No Contractor Name Location Limitations/Conditions

8754 ABB/AEIL Germany

11231 ARABIAN POINT EIGHT POWER Saudi Arabia Point Vac C , Point Vac G from Square D

8999 WAHAH ELECTRIC SUPPLY CO. (WESCOSA) Saudi Arabia

8763 VA TECH France

Wednesday, March 11, 2020 Page 233 of 304

8762 TMT&D CORP. Japan

8761 SIEMENS USA

8760 S&C USA

8759 JAPAN AE POWER SYSTEMS CORP. Japan

8758 EPS (GROUPE SCHNEIDER) Saudi Arabia None

8753 ABB ( T& D) USA

8755 ABB-CALOR EMAG Germany

Wednesday, March 11, 2020 Page 234 of 304

11232 POINT EIGHT POWER USA Point Vac C , Point Vac G

8757 AREVA Germany

Sub Category METAL-CLAD SWITCHGEAR, INDOOR – 1 TO 13.8 kV

No Contractor Name Location Limitations/Conditions

8775 SIEMENS POWER T&D USA GM/GMI Type

8768 ABB POWER T & D CO. USA

8658 Hyundai Electric & Energy Systems Co.,Ltd. Korea HMS type, Up to 13.8 KV with rated
current up to 3150A @50 C Ambient

8774 GENERAL ELECTRIC USA Type PowerVac

Wednesday, March 11, 2020 Page 235 of 304

10890 Electronic & Electrical Industries Saudi Arabia Hyundai medium voltage air-insulated
Corporation(EEI metal clad switchgear (HMS) type up to
13.8 with rated current up to 3150 A at
50^ C ambient.

10345 WESCOSA - Wahah Electric Supply Saudi Arabia - Limitation:-

Company of Saudi A Metal-enclosed Switchgear with
withdrawable Vacuum Circuit Breaker
type: Hyundai HVF Series (IEC 62271-
100).
-Up to 17.5 kV, 3600 A,
40 kA / 3s.

- Condition:-

Generartion Engineering and Project

Sector.

9844 Alfanar MV swichgeer Saudi Arabia NES-H, 13.8 kV Metal

Clade Switchgear, Up to
3150 A, VCB type LSIS,
Rated short-time withstand current
25 KA/3s.
1- One project as a beginning and as per
SEC Generation
Projects Standards and
Specifications. Removal of this condition
depends on the performance of supplied
products.
2- Extended (10) years warranty for the
first order of each rating.

8986 POINT EIGHT POWER USA Point Vac C , Point Vac G

Wednesday, March 11, 2020 Page 236 of 304

8985 ARABIAN POINT EIGHT POWER Saudi Arabia Point Vac C , Point Vac G from Square D

8984 WAHAH ELECTRIC SUPPLY CO. Saudi Arabia Based on POWEL VAC
(WESCOSA)

8776 SQUARE D / GROUPE SCHNIEDER USA Class 6055/VAD-3

8770 ABB ELECTRICAL IND. CO., LTD. (AEIL) Saudi Arabia

8773 ELECTRICAL POWER DISTRIBUTION Saudi Arabia None

BOARDS & SWITCHGEAR

8772 CUTLER HAMMER USA Vac-Clad W

Sub Category METAL-CLAD SWITCHGEAR, INDOOR – 1 TO 38 kV

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 237 of 304

11245 ARABIA ELECTRIC, LTD. (Equipment) Saudi Arabia LIMITATIONS:
- NXAIR Type
- Up to 17.5 Kv, 4000 A, 50 kA / 3s.
CONDITIONS:
- Guarantee / Warranty letter from
Siemens.
- Extended (10) years warranty for first
order of each rating.

Sub Category MOTOR CONTROL CENTERS

No Contractor Name Location Limitations/Conditions

10592 EPS (GROUPE SCHNEIDER) Saudi Arabia

6759 POWELL (ONLY IF PART OF PACKAGE) Country of origin is

subject to SEC
approval

6760 ALLEN BRADLEY Country of origin is FOR 480V MCC, 4160V MCC
subject to SEC
approval

6761 CUTLER HAMMER USA / United FOR 480V MCC, 4160V MCC
Kingdom

Wednesday, March 11, 2020 Page 238 of 304

8916 ABB ELECTRICAL IND. CO., LTD. (AEIL) Saudi Arabia - MCC(MNS Series).

9155 Hyundai Electric & Energy Systems Co.,Ltd. Korea

9757 Nour Industries Saudi Arabia -Siemens Sivacon.

- Ten (10) Years extended warranty.

11670 ARABIA ELECTRIC, LTD. (Equipment) Saudi Arabia LIMITATIONS:

- Sivacon S8 Type.
- Up to 6300A, 100KA
CONDITIONS:
- NIL

9851 Electronic & Electrical Industries Saudi Arabia for switchgear :SEN Plus 1600A, 2000A,
Corporation (EE 3200A, 4000A, 5000A and 6400A.
Air Circuit Breaker: EntelliGuard type, GE
Poland.
MCCB: Record Plus type, GE Poland.

For Motor control center : SEN Plus

1600A, 2000A, 3200A and 4000A.
Maximum operation current on the
main bus bar: 3500A at 40°C.
Air Circuit Breaker: EntelliGuard type, GE
Poland.
MCCB: Record Plus type, GE Poland.

Wednesday, March 11, 2020 Page 239 of 304

 Sub Category SWITCHRACK, OUTDOOR – LOW VOLTAGE

No Contractor Name Location Limitations/Conditions

9017 REMAL Saudi Arabia None

9019 JEDDAH ELECTRICAL DISTRIBUTION Saudi Arabia None

9014 ARABIAN POINT EIGHT POWER Saudi Arabia None

9018 WESCOSA Saudi Arabia None

Main Category T/L STEEL STRUCTURE (LATTICED) UP TO 380KV

Sub Category T/L STEEL STRUCTURE (LATTICED) UP TO 380KV

No Contractor Name Location Limitations/Conditions

7280 AL-SALAM Saudi Arabia

7274 HIDADA LTD. Saudi Arabia

Wednesday, March 11, 2020 Page 240 of 304

7270 ARABIAN INTERNATIONAL CO. (AIC) Saudi Arabia

7268 AL ZAMIL STEEL Saudi Arabia

7265 AL BABTAIN Saudi Arabia

Main Category Tanks

Sub Category Fuel/Oil Storage Tanks/Water Storage Tanks, etc*

No Contractor Name Location Limitations/Conditions

8197 ARABIAN TANK & VESSEL Saudi Arabia No Limitation

8194 Arabian CBI Ltd. Saudi Arabia No Limitation

8195 SAUDI METAL COATING CO. Ltd. Saudi Arabia No Limitation

Wednesday, March 11, 2020 Page 241 of 304

8196 Al Zamil Heavy Industries Saudi Arabia No Limitation

11608 Metscco Heavy Steel Industries Co. Ltd. Saudi Arabia Up to 50,000m^3 for Fuel/Oil Storage
Tanks

9246 Al-Ayash Est. Saudi Arabia Up to 20,000 m3(Fix Roof Tank)

9950 HIDADA LTD. Saudi Arabia Engineering,Procurement and

construction for fuel tanks.

9951 Bakri International Energy Saudi Arabia Fixed roof Fuel Oil storage tanks.
.Maximum capacity 20.000 m3

10095 ZAMIL STEEL INDUSTRIES PED Saudi Arabia No Limitation

11291 Nesma Havatek Industrial Co. Saudi Arabia Capacity 30,000 m3

Wednesday, March 11, 2020 Page 242 of 304

11110 Al Zamil Metal Works Factory Saudi Arabia Storage Tanks including coating and
replacement of slall size and up to
50,000m3 as rebuilt; associated
pipe,linings,connections for fuel
oil,distillate oil,crude
oil,gas,chemicals,and water,and
structural steel assemblies for support
of pipe and conveyance equipment.

11903 Arabian Gulf Metal Factory Saudi Arabia Capacity = 20,000m3

11678 Al Zamil Metal Works Factory Saudi Arabia Maximum Capacity 55,000m3

11949 SINSINA Corner Company For Contracting Saudi Arabia Capacity up to 15000 m3

Main Category Torque Converting Systems

Sub Category Gear-Boxes

No Contractor Name Location Limitations/Conditions

11060 Voith Turbo GmbH & Co.KG Germany

Wednesday, March 11, 2020 Page 243 of 304

10016 Hansen Industrial Transmissions nv Belgium Only for auxiliary and BOP systems and
up to 180 KW.

11105 Twin Disc, Inc. USA

Sub Category VARIABLE FREQUENCY DRIVES

No Contractor Name Location Limitations/Conditions

6720 ABB INDUSTRY OY HELSINKI, FINLAND Less than 1 KV

6568 SIEMENS ENERGY AND AUTOMATION USA

6566 CUTLER HAMMER USA / United

Kingdom

9961 GE Energy Power Conversion France

6727 HILL GRAHAM CONTROLS United Kingdom

Wednesday, March 11, 2020 Page 244 of 304

6722 TELEMECANIQUE OR SQUARE RUE ANDRE Less than 1 KV
D/TELEMECANIQUE BLANCHET, FRANCE

6723 TOSHIBA USA Less than 1 KV

6726 ABB INDUSTRIE AG TURGI, Switzerland

6721 CONTROL TECHNIQUES / EMERSON United Kingdom Less than 1 KV

6728 ROBICON USA

6729 SAFTRONICS Country of origin is

subject to SEC
approval

8427 NIDEC Ansaldo Sistemi Industriali S.P.A Italy -Water Cooled SFC up to 24MVA.
-Air Cooler SFC up to 10.4MVA.

Wednesday, March 11, 2020 Page 245 of 304

10965 GE Power conversation Berlin, Germany Models:-
- MV 7000
- MV 6000
- LV 8000

6564 ALLEN-BRADLEY USA

6550 GENERAL ELECTRIC USA

6540 SIEMENS Germany

11632 LSIS Korea/cheonan - Medium Voltage: Up to 13.8kV.

- Capacity: Up to 3000kW.

6730 DANFOSS Country of origin is

subject to SEC
approval

Main Category Transformers

Wednesday, March 11, 2020 Page 246 of 304

 Sub Category 110 – 132KV, 230KV & 380KV CTS

No Contractor Name Location Limitations/Conditions

6624 AREVA United Kingdom

7398 KWK MESWANDLER Germany

6595 ABB ( T& D) USA

6513 ABB SWEDEN

6845 ALSTOM (T & D) BALTEAU SA (NV) Belgium

7367 HAEFELY-TRENCH ELECTRIC Switzerland

7381 NISSIN Japan

Wednesday, March 11, 2020 Page 247 of 304

7387 RITZ USA

7395 KUHLMAN ELECTRIC CORPORATION USA

6693 VA TECH Italy

7407 STE Italy

7404 SADTEM France

7401 PFIFFNER Switzerland

Sub Category 110 – 132KV, 230KV, 380KV POTENTIAL TRANSFORMERS

No Contractor Name Location Limitations/Conditions

7379 NISSIN Japan

Wednesday, March 11, 2020 Page 248 of 304

7385 RITZ USA

6511 ABB SWEDEN

6592 ABB ( T& D) USA

6843 ALSTOM (T & D) BALTEAU SA (NV) Belgium

8631 HAEFELY-TRENCH ELECTRIC France

7365 HAEFELY-TRENCH ELECTRIC Switzerland

6622 AREVA United Kingdom

Sub Category Auxiliary Transformers

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 249 of 304

8573 WESCOSA Saudi Arabia • Voltage : MV / LV.
• Capacity : 4 MVA.

8908 Alfanar Trading. Saudi Arabia • Voltage : 13.8 kV.

• Capacity : 630 KVA.
• With cooling fins.

8624 SAUDI TRANSFORMERS CO. Saudi Arabia • Voltage : MV/LV

• Capacity : 2 MVA.

8575 ABB Karte, Turkey • Voltage : MV / LV.

• Capacity : 4 MVA.

8576 BEST Balikesir, Turkey • Voltage : MV / LV.

• Capacity : 4 MVA.

6771 Hyundai Electric & Energy Systems Co.,Ltd. Korea • Voltage : MV / LV.
• Capacity : 4 MVA.

Wednesday, March 11, 2020 Page 250 of 304

6476 ABB Saudi Arabia • Voltage : MV / LV.
• Capacity : 4 MVA.

8574 Schneider Electric Gebze, Turkey • Voltage : MV / LV.

• Capacity : 4 MVA.

Sub Category CCPD/CCVT, 69KV UP TO 380 KV

No Contractor Name Location Limitations/Conditions

7331 ABB HV TECHNOLOGIES Switzerland

6691 VA TECH Italy

7362 HAEFELY-TRENCH ELECTRIC Canada

7371 GE USA

7376 NISSIN Japan

Wednesday, March 11, 2020 Page 251 of 304

7382 PASSONI & VILLA Italy

7383 RITZ USA

6509 ABB SWEDEN

Sub Category GENERATOR UNIT TRANSFORMERS (GUT)

No Contractor Name Location Limitations/Conditions

8567 SIEMENS Nurenburg, • Voltage : No Limitation.
Germany • Capacity : No Limitation.
• Including (3) windings trafo.

10052 Zaporozhtransformator PJSC (ZTR) Zaporozhye, • Voltage : 380 kV

Ukraine • Capacity : 300 MVA.
• Including (3) windings trafo.

9837 CG Electric System Hungary zrt. Tapioszele, Hungary • Voltage : 132 kV

• Capacity : 120 MVA
• Only (2) windings trafo.

Wednesday, March 11, 2020 Page 252 of 304

8347 Hyundai Electric & Energy Systems Co.,Ltd. Korea • Voltage : 380 kV.
• Capacity : 600 MVA.
• Including (3) windings trafo.

9834 CG Power Systems Belgium NV. Mechelen, Belgium • Voltage : 380 kV.
• Capacity : 300 MVA
• Including (3) windings trafo.

8562 HITACHI Kokubu, Japan • Voltage : No Limitation.

• Capacity : No Limitation.
• Including (3) windings trafo

9290 Fortune Electric Company TauYuan,Taiwan • Voltage : 132 kV.

• Capacity : 250 MVA.
• Only (2) windings trafo.
- Kuan Yin II Plant.
For the first order of each rating and
type,the design of transformer to be
vetted and approved by
Hitachi.Compliance of this shall be
submitted to SEC for approval & record.

8563 ABB ludvika, Sweden • Voltage : No Limitation.

• Capacity : No Limitation.
• Including (3) windings trafo.

Wednesday, March 11, 2020 Page 253 of 304

8565 ABB KӦln, Germany • Voltage : 380 kV.
• Capacity : 300 MV.
• Only (2) windings trafo.

8566 ALSTOM GRID Gebze, Turkey • Voltage : 380 kV.

• Capacity : 600 MVA.
• Including (3) windings trafo.

8670 ABB Cordoba, Spain • Voltage : 380 kV.

• Capacity : 300 MVA.
• Including (3) windings trafo.

8569 Siemens Transformers Austria GmbH & Co Weiz, Austria • Voltage : 380 kV.
KG • Capacity : 600 MVA.
• Including (3) windings trafo.

8668 SMIT TRANSFORMER B.V. Netherlands • Voltage : No Limitation.

• Capacity : No Limitation.
• Including (3) windings trafo.

Wednesday, March 11, 2020 Page 254 of 304

10346 Fuji Electric Co., Ltd. Chiba, Japan • Voltage : 380 kV
• Capacity : 300 MVA.
• Including (3) windings trafo.
-In case of two LV windings, it shall be
radial split windings.

11117 SIEMENS Dresden, Germany • Voltage : 132 kV.

• Capacity : 120 MVA.
• Only (2) windings trafo.

8568 ABB Kartel, Turkey • Voltage : 380 kV.

• Capacity : 300 MVA.
• Including (3) windings trafo.

8918 BEST Balikesir, Turkey • Voltage : 380 kV.

• Capacity : 300 MVA.
• Only (2) windings trafo.

Sub Category STATION SERVICE TRANSFORMER (SST)

No Contractor Name Location Limitations/Conditions

9186 ALSTOM GRID Gebze, Turkey • Voltage : No Limitation.
• Capacity : 63 MVA.
• Including (2) windings trafo. with
tertiary.
• Including (3) windings trafo with
tertiary.

Wednesday, March 11, 2020 Page 255 of 304

8445 EMCO Ltd. Thane, India • Voltage : 132 kV
• Capacity : 63 MVA.
• Only (2) windings trafo.

9553 SHIHLIN ELECTRIC Hsin Chu, Taiwan • Voltage : No Limitation.

• Capacity : 10 MVA.
• Only (2) windings trafo.

9267 Fortune Electric Company TauYuan, Taiwan • Voltage : 132 kV

• Capacity : 63 MVA.
• Only (2) windings trafo.
- Kuan Yin II Plant.
For the first order of each rating and
type,the design of transformer to be
vetted and approved by
Hitachi.Compliance of this shall be
submitted to SEC for approval & record.

9192 Hyundai Electric & Energy Systems Co.,Ltd. Korea • Voltage : No Limitation.
• Capacity : 63 MVA.
• Only (2) windings trafo.

9191 HITACHI Kokubu, Japan • Voltage : No Limitation.

• Capacity : No Limitation.
• Including (2) windings trafo. with
tertiary.
• Including (3) windings trafo with
tertiary.

Wednesday, March 11, 2020 Page 256 of 304

9190 Siemens Transformers Austria GmbH & Co Weiz, Austria • Voltage : No Limitation.
KG • Capacity : No Limition.
• Including (2) windings trafo. With
tertiary.
• Including (3) windings trafo with
tertiary.

9187 AREVA Germany • Voltage : 132 kV.

• Capacity : 63 MVA.
• Including (2) windings trafo. with
tertiary.
• Including (3) windings trafo with
tertiary.

9185 ABB Kartel, Turkey • Voltage : No Limitation.

• Capacity : 63 MVA.
• Including (2) windings trafo. with
tertiary.
• Including (3) windings trafo. With
tertiary.

9184 ABB KӦln, Germany • Voltage : No Limitation.

• Capacity : 63 MVA.
• Including (2) windings trafo. With
tertiary.
• Including (3) windings trafo with
tertiary.

Wednesday, March 11, 2020 Page 257 of 304

9183 ABB ludvika, Sweden • Voltage : No Limitation.
• Capacity : No Limitation.
• Including (2) windings trafo. With
tertiary.
• Including (3) windings trafo. With
tertiary.

11954 ILJIN Electric.Co. LTD. Korea Voltage: 132 kV

Capacity: 63 MVA
Winding: Two windings

8412 TBEA Xinjiang, China • Voltage : 132 kV

• Capacity : 63 MVA.
• Only (2) windings trafo.

9188 BEST Balikesir, Turkey • Voltage : No Limitation.

• Capacity : 100 MVA.
• Including (2) windings trafo. With
tertiary.

8793 SMIT TRANSFORMER B.V. Netherlands • Voltage : No Limitation.

• Capacity : No Limitation.
• Including (2) windings trafo. with
tertiary.
• Including (3) windings trafo with
tertiary.

Wednesday, March 11, 2020 Page 258 of 304

9073 ABB Cordoba, Spain • Voltage : No Limitation.
• Capacity : 63 MVA.
• Including (2) windings trafo. with
tertiary.
• Including (3) windings trafo with
tertiary.

10873 SIEMENS Dresden, Germany • Voltage : 132 kV.

• Capacity : 63 MVA.
• Only (2) windings trafo.

10872 SIEMENS Nurenburg, • Voltage : No Limitation.

Germany • Capacity : No Limitation.
• Including (2) windings trafo. with
tertiary.
• Including (3) windings trafo with
tertiary.

10344 Zaporozhtransformator PJSC (ZTR) Zaporozhye, • Voltage : No Limitation.

Ukraine • Capacity : No Limitation.
• Including (2) windings trafo. with
tertiary.
• Including (3) windings trafo with
tertiary.

9838 CG Electric System Hungary zrt. Tapioszele, Hungary • Voltage : 132 kV.
• Capacity : 63 MVA.
• Only (2) windings trafo.

Wednesday, March 11, 2020 Page 259 of 304

9835 CG Power Systems Belgium NV. Mechelen, Belgium • Voltage : No Limitation
• Capacity : 63 MVA.
• Including (2) windings trafo. With
tertiary.
• Including (3) windings trafo with
tertiary.

8455 Toshiba Corporation Kawasaki, Japan • Voltage : 132 kV

• Capacity : 63 MVA.
• Only (2) windings trafo.

Sub Category Transformer

No Contractor Name Location Limitations/Conditions

11128 Saudi Power Transformers Company Saudi Arabia • Voltage: 132 KV.
(SPTC) • Capacity: 100 MVA.
• Only (2) windings trafo.
• SPTC shall demonstrate factory
capability to test the transformer
according to SEC specification.

Sub Category UNIT AUXILIARY TRANSFORMER (UAT)

No Contractor Name Location Limitations/Conditions

8784 Siemens Transformers Austria GmbH & Co Weiz, Austria • Voltage : No Limitation
KG • Capacity : 20 MVA.
• Including (2/3) windings trafo.

Wednesday, March 11, 2020 Page 260 of 304

8780 ABB ludvika, Sweden • Voltage : No Limitation.
• Capacity : No Limitation.
• Including (2/3) windings trafo.

8713 SHIHLIN ELECTRIC Hsin Chu, Taiwan • Voltage : No Limitation.

• Capacity : 5 MVA
• Only (2) windings trafo.

8779 HITACHI Kokubu, Japan • Voltage : No Limitation.

• Capacity : No Limitation.
• Including (2/3) windings trafo.

8781 AREVA Germany • Voltage : No Limitation.

• Capacity : 20 MVA.
• Only (2) windings trafo.

8782 ALSTOM GRID Gebze, Turkey • Voltage : No Limitation.

• Capacity : 100 MVA.
• Including (2/3) windings trafo.

8783 ABB Karte, Turkey • Voltage : No Limitation.

• Capacity : 40 MVA.
• Including (2/3) windings trafo.

Wednesday, March 11, 2020 Page 261 of 304

9552 Fortune Electric Company TauYuan, Taiwan • Voltage : No Limitation
• Capacity : 10 MVA
• Only (2) windings trafo.

- Kuan Yin II Plant.

For the first order of each rating and
type,the design of transformer to be
vetted and approved by
Hitachi.Compliance of this shall be
submitted to SEC for approval & record.

8778 SIEMENS Nurenburg, • Voltage : No Limitation.

Germany • Capacity : No Limitation.
• Including (2/3) windings trafo.

8785 Hyundai Electric & Energy Systems Co.,Ltd. Korea • Voltage : No Limitation.
• Capacity : 100 MVA.
• Including (2/3) windings trafo.

Wednesday, March 11, 2020 Page 262 of 304

11410 ILJIN Electric.Co. LTD. Korea Voltage: No Limitation Capacity: 65 MVA
Winding: Two windings
Conditions:-
- Extended (10) years guarantee /
warranty in respect of defects due to
design, manufacturing, installation and
workmanship from the date of (PAC) or
from the date of delivery for the direct
material supply order
It shall be applicable for first order and
shall cover all cost of materials and labor
as per guarantee / warranty of material
and workmanship and subsequently
reduced yearly in case of future order
award.

10874 SIEMENS Dresden, Germany • Voltage : No Limitation.

• Capacity : 10 MVA.
• Only (2) windings trafo.

10343 Zaporozhtransformator PJSC (ZTR) Zaporozhye, • Voltage : No Limitation.

Ukraine • Capacity : 120 MVA.
• Including (2/3) windings trafo.

9839 CG Electric System Hungary zrt. Tapioszele, Hungary • Voltage : No Limitation.

• Capacity : 20 MVA.
• Only (2) windings trafo.

Wednesday, March 11, 2020 Page 263 of 304

9836 CG Power Systems Belgium NV. Mechelen, Belgium • Voltage : No Limitation.
• Capacity : 63 MVA.
• Only (2) windings trafo.

11455 Fuji Electric Co., Ltd. Chiba, Japan • Voltage : No Limitation.

• Capacity : 80 MVA.
• Including (2/3) windings trafo.

8792 SMIT TRANSFORMER B.V. Netherlands • Voltage : No Limitation.

• Capacity : No Limitation.
• Including (2/3) windings trafo.

8786 ABB KӦln, Germany • Voltage : No Limitation.

• Capacity : 20 MVA.
• Including (2/3) windings trafo.

8787 EMCO Ltd. Thane, India • Voltage : No Limitation.

• Capacity : 10 MVA.
• Only (2) windings trafo.

8791 Toshiba Corporation Kawasaki, Japan • Voltage : No Limitation.

• Capacity : 10 MVA.
• Only (2) windings trafo.

Wednesday, March 11, 2020 Page 264 of 304

9072 ABB Cordoba, Spain • Voltage : No Limitation.
• Capacity : 20 MVA.
• Including (2/3) windings trafo.

9189 BEST Balikesir, Turkey • Voltage : No Limitation.

• Capacity : 60 MVA.
• Including (2/3) windings trafo.

9196 TBEA Xinjiang, China • Voltage : No Limitation.

• Capacity : 10 MVA.
• Only (2) windings trafo.

Main Category TURBINE I+C SYSTEM

Sub Category TURBINE I+C SYSTEM

No Contractor Name Location Limitations/Conditions

7524 SIEMENS-AG Germany

7522 ALSTOM POWER-CENTRAL France

Wednesday, March 11, 2020 Page 265 of 304

7523 ABB POWER AUTOMATION Switzerland

Main Category Turbo generator

Sub Category SYNCHRONOUS GENERATORS

No Contractor Name Location Limitations/Conditions

10226 Mitsubishi Electric (MELCO) Kobe, Japan

5079 ALSTOM POWER United Kingdom

6553 GENERAL ELECTRIC PETERBOROUGH,

ON, CANADA

6745 BRUSH United Kingdom

9152 ANSALDO ENERGIA S.p.A. Italy Air Cooled Generators Up to 300MVA

for60HzModeles;
(WY18Z,WY21Z,WY23Z,WX18Z,and
WX21Z&WX23Z)

Wednesday, March 11, 2020 Page 266 of 304

6543 SIEMENS Germany

11053 NIDEC Ansaldo Sistemi Industriali S.P.A Italy Up to 12.6MW Only

11090 TMEIC (Toshiba-Mitsubishi Electric Japan 2 Pole Synchronous Generator Up to 40

Industrial Syst MVA only.

11513 BRUSH SEM s.r.o. Czech Republic 1- TEWAC Generators:

From 100 MVA to 305 MVA.
2- Hydrogen-Cooled Generators:
From 200 MVA to 1300 MVA

11561 ANDRITZ HYDRO GmbH., Austria 1- TEWAC Generators:

A-Up to 350 MVA.
B-Five years warranty.
2- Hydrogen-Cooled Generators:
A-Up to 450 MVA.
B-The supplier of Stator Frame of the
first unit supplied to SEC must be
audited for welding process and
procedures along with pressure test.

10270 Siemens Energy, Inc. / Charlotte Turbine Charlotte, USA

Generator

Wednesday, March 11, 2020 Page 267 of 304

Main Category VALVES

Sub Category BOILER FEED/FEED/STOP/MAIN STEAM STOP VALVES

No Contractor Name Location Limitations/Conditions

10010 Key Valve Technologies (KVT ) Korea Size: up to and including 40"
Rating: up to and including 4500 Ibs
/PN640/10.000psi

11944 CCI Valves Korea

10259 CCI USA, Switzerland,

Sweden, Austria

5106 EDWARDS USA

5108 DRESSER (FLOWSERVE) USA

11865 Weir Valves & Controls United Kingdom Size: Up to and including 16"
Class: Up to and including 4500.

Wednesday, March 11, 2020 Page 268 of 304

 Sub Category BOILER SAFETY VALVES

No Contractor Name Location Limitations/Conditions

11940 Fukui Seisakusho Co. Japan

5109 DRESSER (FLOWSERVE) USA / Italy

5113 CROSBY USA

10260 CCI USA, Switzerland,

Sweden, Austria

Sub Category COMBINED MAIN STOP AND CONTROL VALVE/ACTUATOR

No Contractor Name Location Limitations/Conditions

5015 REXROTH USA

Sub Category CONTROL VALVES – Valves (Butterfly , Gate , Globe , Check , Ball ) AND
PLUG; VALVE: CONTROL; INCLUDING ACTUATOR, POSITIONER & REGULATOR
No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 269 of 304

6415 METSO AUTOMATION OY HELSINKI, FI

9728 SPX Flow US LLC- Copes Vulcan USA Dia. Up to 16"-Class up to 1500.

8906 Pentair Valve &control italia S.r.I- Vanessa Italy -Butterfly Valve ,Size up to 12 inch ,class
manuf 150 only ,non - ferrous body , 04-
SAMM-035, 04-SAMMSS-048.
Concentric design, class 150 only all ends
with or without actuator.

-Butterfly Valve ,High performance type

, Size 2 Inch and up , Ansi CI 150
Valves And up supply AA API 609 . 04-
SAMMSS-035,Double eccentric design
.Soft seated with or without actuator
specification Api Std 609 Category B.

-Butterfly Valve , High performance

type. Triple eccentric design type API
609 category B, 04 SAMMSS 04-SAMSS-
048, Metal seated, Zero leakage
with or without actuator. Butterfly valve
metal seated , Zero leakage . Any
size and rating flanged or bet weld ends
API 609 category B.

9050 KSB Amri France Manafactured in France Only

Wednesday, March 11, 2020 Page 270 of 304

9148 CEPHAS PIPLINE CORPORATION Korea •Concentric, -Double & Triple and
quadruple offset design.•80 mm to
900 mm ANSI CLASS 600,•1000 mm
to 4000 mm with Double , Triple and
quadruple offset design, ANSI Class 300.

9158 ACE Valve Company Limited Korea - Butterfly valve Class: 150 - 2500,Size
up to 60"
- Butterfly Valve ;High performance ; 2
inch.
- Globe Valve Class : 150 - 2500,Size up
to 18"
- Ball Valve Class : 150 - 2500,Size up to
16"
- Check Valve Class: 150 - 2500,Size up
to 24"
- Gate Valve Class : 150 - 2500 ,Size up
to 24"

9259 Econosto Mideast B.V. Netherlands - Gate Valve 2"-16" , Class up to 2500.
- Globe Valve 2"-8" , Class up to 2500.
- BallValve 2"-8" , Class up to 2500.
- Butterfly Valve 2"-12" , Class up to 900.
- Check Valve 2"-10" , Class up to 2500.

9260 CCI Valves Korea -Pneumatic and Hydaraulic Actuated.

-Up to 2500 class.

Wednesday, March 11, 2020 Page 271 of 304

10261 CCI USA, Switzerland,
Sweden, Austria

9398 Samshin Limited Korea 1-Gate Globe Check valves Forged : ize
up to 50 mm and ANSIpressure class
600 to 4500
2-Gate Globe Check valves Casting :
Size 65 mm to 900mm and ANSI
pressure class 150 to 4500
3- For other sides up to 900 mm only.
Ansi pressure class 150-600

8426 S&S Valve Korea 1. Gate Globe Check Valves Forged :

Models : ANSI (600 : 4500) Size up to 50
mm2. Gate Globe Check Valves
Casting: Models : ANSI (150:2500) Size
50 mm up to 900mm3. Control Valves
Models : ANSI 2500 , Size up to DN 50
Models : ANSI 1500 , Size DN
2- Ball ValvesModels : ANSI 600 , Size
300 mm
3- Cryogenic ValvesModels : ANSI 600
Only for Water & Fluid application

10008 Weir Valves & Controls United Kingdom Size: Up to and including 16"
Class: Up to and including 2500.

Wednesday, March 11, 2020 Page 272 of 304

10084 Stahl-Armaturen PERSTA Gmbh Germany 1- Globe Valve:
Class 600 - 3200
"Size 3/8" - 10
2- Gat Valve:
Class 150" - 4500
Size 1/2" - 28"
3- Swing Check Valves:
Class 600 - 4500
Size 2" - 24"
4- Stop Check Valve:
Class 600 - 2500
Size 3" - 16"
5- Line Blind Valves:
Class 600 - 4500
Size 2 1/2" - 28"

10100 Key Valve Technologies (KVT ) Korea Size: up to and including 40"
Rating: up to and including 4500 Ibs
/PN640/10.000psi

10135 Young Poong Precision Corporation Korea - Ball Valves : Class : 150 - 1500.

6421 MACHINEFABRIEK MOKVELD B.V. Netherlands

10188 ARFLU VAlVES Spain -Gate Valve: 2"~52", Class up to 1500

-Globe Valve: 2"~24", Class up to 1500
-Ball Valve: 1/2"~36", Class up to 1500
-Plug Valve: 2"~36", Class up to 1500

Wednesday, March 11, 2020 Page 273 of 304

9331 PK VALVE CO., LTD. Korea 1-Gate valve Class 150-2500.

2-Globe valve Class 150-2500.

3-Swing/CH valve Class 300-2500.

6401 NIIGATA MASONEILAN CO LTD Japan

12267 Global Arabian Valves Saudi Arabia Only for:

Gate Valve: 1"~20" ,Class up to 600
Check Vavle: 1"~20" ,Class up to 600
Globe Valve: 1"~16" ,Class up to 600

6372 UTSUE Japan

6374 SEVERN GLOCON LTD. United Kingdom Digital positioner to be supplied from
other approved vendors

6375 FISHER NIPPON CO. LTD. Japan

Wednesday, March 11, 2020 Page 274 of 304

6376 FISHER CONTROLS INCORPORATED USA

6380 FISHER ROSEMOUNT HUNGARY LTD SZEKESFEHERVAR,

HU

8459 Crane Valve Group / Krombach Germany 1-Butterfly Valves:

*Only for Steam & Water
*Models: Double & Triple Eccentric
*Size : 6" - 136"
2- Ball Valves:
*No Limitation.
3- Y & Basket Strainer:
*No Limitation.

6389 FLOWSERVE CORPORATION United States

8434 GREEN CONTROL S.R.L. Italy 1-Turbine bypass valves (both steam
and desuperheat.
2-Feedwater and condensate flow
control valves.
3-Boiler feed pump and condesate
pump minimum flow control valves.
4-Desuperheater spray water control
valves.

Wednesday, March 11, 2020 Page 275 of 304

6403 DRESSER AL-RUSHAID VALVE & Saudi Arabia
INSTRUMENT/ ASHCROFT (M

6407 DRESSER PRODUCTS INDUSTRIES France

6410 DRESSER ITALIA SPA Italy

6412 NIPPON FISHER CO. LTD. Japan

6419 FLOWSERVE CORPORATION United Kingdom

7543 MASONELIAN (DRESSER) USA

10242 Nihon Koso Co Japan

Wednesday, March 11, 2020 Page 276 of 304

6384 FISHER ROSEMOUNT S.A. France

10795 Crane Energy Flow Solutions Pacific Valves USA 1- Gate Valves:
Class: 150-2500
Sizes up to 38"
2- Globe Valve:
Class: 150-2500
Sizes up to 24"
3- Check Valves
Class: 150-2500
Sizes up to 24"

10293 M/S MTS VAVES & TECHNOLOGY spain 1- Gate valves (Option : flexible Wedge
(Arrankudiaga, spi & Parallel slide)(size : 1/2 - 60 )
2- Glople Bolted Bonnet Valves (Option
: "T" body & "Y"body type)(size : 1/2 -
60 )
3- check Bolted Bonnet Valves (Option :
Swing check & Piston check)(size : 1/2 -
60 )
4- Manufacturing Plug Lubricated
Valve(size : 1/2 - 24 )
5-Manufacturing Plug NON-Lubricated
Valve (size : 1/2 - 24 )
6- Manufacturing Butterfly Valve (
Construction: Tripple Offset ,Metal-to-
Metal)(size"2"-"30")
7- Manufacturing Check Dual Plate
Wafer Check Valve (Size ("1/2" - "60")
8- Manufacturing Globle Bellow Seal
Valve (Size "1/2" - "16 ")
9- Manufacturing Globle control Valve (
Size "1" - "16")

Wednesday, March 11, 2020 Page 277 of 304

11709 DAHER GROUP France Ball\
Class: 150-2500
Size\ 1/4 to 30 inch
Butterfly:
Class: 150-2500
Size: 3 to 80 inch
Gate\
Class: 150-2500
Size: 3 to 24 inch

11648 PARCOL Valve S.p.A. Italy - Globe Valve Class 2500, Up to 24".
- Ball Valve Class 2500, Up to 84".
- Butterfly Valve Class 1500, Up to 80".
- Control Valve Class 2500, Up to 6".

11566 AVK Saudi Valve Manufacturing Company Saudi Arabia

11257 GE Nuovo Pignone SPA Italy Only for :

Size Range - 1" to 44" std. - Rating - Class
150# to 2,500#; API, 10,000; API
15.000. - Cast and Forged
Body - Globe and Angle Control Valves,

Wednesday, March 11, 2020 Page 278 of 304

11124 PK VALVE CO., LTD. Korea - Globe Valve Class :150-2500 no size
limit, class 4500, size up to 14".

- Gate Valve Class :150-2500 no size

limit, class ,4500, size up to 24".

- Ball Valve Class :150-2500, size up to

60".

- Buterfly Valve Class :150-900, size up

to 120".

- Check Valve Class :150-2500 no size

limit, class, 4500, size up to 24'.

10805 BAC VALVES, S.A spain 1-Ball Valves: Class 150-2500, Size up
to 12” Without ACTUATOR.

2-Butterfly Valves: Class 150-300, Size

up to 13” Without ACTUATOR.

10485 RMT Valvomeccanica Italy For Ball Valve Up to 30" class 1500.

10438 ValvTechnologies USA Diameter 1/2"up to 8" Class 900 to 4500.

Diameter 1/2"up to 36" Class 150 to 600.
Diameter 6"up to 42" Class 600 to 2500.
Diameter 1/2"up to 36" Class 150 to
2500.

Wednesday, March 11, 2020 Page 279 of 304

10384 KPC Corporation Korea 1) Size 2 through 48 inch,ANSI CL150
and up supply ,flange or buttweld end
conn ,steel body ,style split body,
thrunnion supported support, metal
seated seat,04-SAMSS-051 appendix
A,04-SAM,with or without Actuator.
2) SPLIT BODY, 2 THRU 48 INCH, ANY
RATING.
3) TOP ENTRY, 2 IN & UP

Wednesday, March 11, 2020 Page 280 of 304

10380 Fasani Manufacturing plant / Pentair Italy -Valve Check; Size 2 thru 24 inch , ANSI
Valves & Cont CL 150 and up supply ,steelbody,
swing,flanged or buttweld end conn,
metal seat , full opening, 04-SAMSS·
035.04-SAMSS-048.Appendix D.

-Valve Check; Size 26 IN and up, supply,

swing, flanged or buttweld end
conn, metal seat. full opening
,04·SAMSS-Q05, 04-5AMSS-004
appendix D

-Valve Check ; Size 1 inch and up, ANASI

CL,150 and up supply. steel
body, piston,flanged or buttwektend
conn, 04SAMSS·035, 04-SAMSS-048.

-Valve Check : Size 2 thru 24 inch, ANSI

CL 150 and up supply, steetbody ,
swing,flanged or butlweld end conn,
04·SAMSS·005. 04-SAMSS·035.
metal seated.

-Valve Check; Size 26 inch and up , ANSI

CL 150 and up supply, steel
1 Valves body , swing flanged or
buttweld end conn, 04·SAMSS·005,
04·SAMSS·
035.

-Valve Check ; Size 2 thru 24 inch . ANSI

CL 150 and up supply , steel body
,tilting disc, flanged or bullweld end
conn, 04·SAMAA-035 . 04·SAMSS·
048.

-Valve Gate Wedge : size 1 thru 24 inch,

ANSI 150 and up supply , flanged
or buttweld end conn .steel body , 04-
SAMSSS-035, 04·SAMSS-048.

-Valve Gate Wedge ; size 26 inch and up,

flanged or buttweld end conn
,steel body , 04·SAMSS..Q35 04 .w ith or
without actuator.

-Valve Gate Wedge ; flanged or butlweld

end coon ,steel body , O4·SAMSS-
00 1 , 04-SAMSS·04 ,soft seated ,with or
without actuator.

-Valve Gate Wedge : size 1 inch up NPS

,ANSI 150and up supply, flanged

Wednesday, March 11, 2020 Page 281 of 304

 or buttweld end conn ,steel body , 04-
SAMSS·002, 04-SAMSS·035 , with or
without actuato.

10295 M/S FLUVAL VALVE ( Amurrio,Spain ) Spain 1- manufacturibg Ball Valve (

Construction : side Entry / Top Entry ,
floating / Trunnion , soft seat / Metal -to-
Metal Seats )( Option: full or reduced
Bore )( size "1/2" - "60" )
2- Manufacturing Gate Bolted Bonnet
Valve (Option : Flexible Wedge &
Parallel Slide )
3- Manufacturing Globe Bolted Bonnet
Valve (Option "T" body & "Y"body
type)(size "1/2" - "60")
4- Manufacturing check Bolted Bonnet
Valve (Option : Swing check & Piston
check )(size "1/2" - "60")

10152 Emerson Process Management Saudi Arabia Globe 1/2"~24", Class up to 1500.
Ball 1"~24", Class up to 1500.
Butterfly 2"~36", Class up to 150.
Plug 1"~12", class up to 1500.

Wednesday, March 11, 2020 Page 282 of 304

10294 M/S LAZARO ITUARTE VALVES ( Ammurrio Spain 1- Gate valves (Option : flexible Wedge
, Spain) & Parallel slide)(size : 1/2 - 60 )
2- Glople Bolted Bonnet Valves (Option
: "T" body & "Y"body type)(size : 1/2 -
60 )
3- check Bolted Bonnet Valves (Option :
Swing check & Piston check)(size : 1/2 -
60 )
4- Manufacturing Gate Pressure seal
Bonnet Valves (Option : flexble Wedge &
Parallei Slide .(size : "1/2" - "36" )
5-Manufacturing Gate Pressure seal
Bonnet Valves(Option : "T" body &
"Y"body type)(size : "1/2" - "36" )
6 - Manufacturing check Pressure Seal
Bonnet Valve ( Option : Swing check ,
Piston check & Titing Disc ) ( Size ( "1/2" -
"36")
7- Manufacturing Gate Through conute
Valve ( Option :Slab Gate & Expaning
Gate ) ( size ( "4" - "60")
8- Manufacturing check Valve (
Construction : Swing Check , Full Bore ) (
Size "2" - " 60" )
9- Manufacturing gate Valve (
Construction : Extended Bolted Bonnet ,
Cryogenic ) ( size "1/2"
10- Manufacturing globe Valve (
Construction : Extended Bolted Bonnet ,
cryogenic ) ( size : "1/2" - " 60 " )
11- Manufacturing check Valve (
Construction : Extended Bolted Bonnet ,
cryogenic ) ,(option : Swing check &
Piston check ) ( size : "1/2" - " 60 " )
12- Manufacturing Ball Valve (
Construction : Extended Bolted Bonnet ,
cryogenic , side Entry / Top Entry ,
Floating / Trunnion , soft
seats ) , ( options : full or reduced Bore )(
size "1/2"-"60")

Wednesday, March 11, 2020 Page 283 of 304

10809 VAG Armaturen Gmbh Germany 1- Gate Valve:
Class 150 - 300
DN: 6" to 160"
2- Butterfly Valve:
Class 150 - 300
DN: 6" to 160"
3- Check Valve:
Class 150 - 300
DN: 8" to 64"
4- Control Valve:
Class 150 - 300
DN: 6" to 80"

Sub Category CONTROL VALVES: AXIAL FLOW

No Contractor Name Location Limitations/Conditions

6423 DANIEL VALVE COMPANY USA

6422 MACHINEFABRIEK MOKVELD B.V. Netherlands

6424 DRESSER AL-RUSHAID Saudi Arabia

Sub Category CONTROL VALVES; AUTOMATIC RECIRCULATION

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 284 of 304

6427 SCHROEDAHL ARAPP GMBH & CO. KG REICHSHOF-
MITTELAGGER, DE

10263 CCI USA, Switzerland,

Sweden, Austria

6428 H. SCHROEDER & CO. GMBH & CO. KG GUMMERSBACH-

ELBACH, DE

6429 TYCO VALVES & CONTROL-YARWAY USA

Sub Category CONTROL VALVES; DESUPERHEATING

No Contractor Name Location Limitations/Conditions

6398 MASONEILAN DIVISION USA

11929 SPX Flow US LLC- Copes Vulcan USA

Sub Category HP/LP BYPASS VALVES STATION

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 285 of 304

5126 BOPP & REUTHER Germany

5127 CCI USA, Switzerland,

Sweden, Austria

10146 Nihon Koso Co. Japan

5130 VANATOME France

11937 CCI Valves Korea -LP Bypass Valves only.

5129 TYCO/SEMPELL Germany

11866 Weir Valves & Controls United Kingdom Size: Up to and including 16"
Class: Up to and including 2500.

Wednesday, March 11, 2020 Page 286 of 304

10248 Welland & Tuxhorn AG Germany

11928 SPX Flow US LLC- Copes Vulcan USA CC Plant only.

Sub Category Large bore valves

No Contractor Name Location Limitations/Conditions

11869 Weir Valves & Controls United Kingdom Size: Up to and including 100"
Class: Up to and including 900.

10249 S.N.R.I France France

Sub Category MAIN AND SECONDARY CW VALVES

No Contractor Name Location Limitations/Conditions

5115 DOUGLAS CHERO SPA Italy

5116 KSB AMRI Germany

Wednesday, March 11, 2020 Page 287 of 304

5118 ORTON Italy

11867 Weir Valves & Controls United Kingdom Size: Up to and including 100"
Class: Up to and including 900.

5117 SAPAG INDUSTRIAL VALVES France

Sub Category SAFETY RELIEF VALVES; FLANGED, CONVENTIONAL AND BALANCED BELLOWS

No Contractor Name Location Limitations/Conditions

10752 LESER GmbH & Co. KG Germany Maximum size 16", highest flange rating
2500.

11904 ValvTechnologies USA Diameter: up to 4" Calss up to 3100.

10665 Yusuf Bin Ahmed Kanoo Co. Ltd Saudi Arabia -For Generation Engineering
and Project s Sector.

Wednesday, March 11, 2020 Page 288 of 304

9403 S&S Valve Korea Safety Relief ValvesModels : ANSI
(150 : 4500) Only for Water & Fluid
application

9399 Samshin Limited Korea up to 4500 classes water aplication only.

8429 Fukui Seisakusho Co. Japan

6344 FARRIS ENGINEERING USA

6340 ANDERSON GREENWOOD CROSBY United Kingdom

6338 DRESSER INDUSTRIAL VALVE USA

6335 DRESSER AL-RUSHAID VALVE & Saudi Arabia

INSTRUMENT/ ASHCROFT

Wednesday, March 11, 2020 Page 289 of 304

12028 PARCOL Valve S.p.A. Italy - Safety Valve Calss 2500, Up to 12".

Sub Category SAFETY RELIEF VALVES; PILOT OPERATED; FOR PROCESSING PLANTS

No Contractor Name Location Limitations/Conditions

6345 FARRIS ENGINEERING Canada

11939 Fukui Seisakusho Co. Japan

6356 TYCO – SAFETY SYSTEMS UK United Kingdom

6341 ANDERSON GREENWOOD CROSBY USA

6339 DRESSER INDUSTRIAL VALVE USA

6336 DRESSER AL-RUSHAID VALVE & Saudi Arabia

INSTRUMENT/ ASHCROFT

Wednesday, March 11, 2020 Page 290 of 304

11882 LESER GmbH & Co. KG Germany Maximum size 16", highest flange rating
2500.

Sub Category SAFETY RELIEF VALVES; PILOT OPERATED; FOR STORAGE TANKS AND
SPHEROIDS
No Contractor Name Location Limitations/Conditions
11941 Fukui Seisakusho Co. Japan

6358 TYCO – VAREC USA

6357 TYCO – WHESSOE United Kingdom

6342 ANDERSON GREENWOOD CROSBY USA

Sub Category SMART ZV CONTROLLER; SMART VALVE CONTROLLER AND SOFTWARE THAT
PROVIDE THE LOCAL CONTROL OF SMART ZV WITH PREDEFINED PARTIAL
No Contractor Name Location Limitations/Conditions
7970 EMERSON-FISHER CONTROLS CO. USA

Wednesday, March 11, 2020 Page 291 of 304

7971 METSO AUTOMATION OY Helsinki, FI

Main Category Water Treatment

Sub Category CHLORINATION SYSTEM

No Contractor Name Location Limitations/Conditions

10032 Cumberland International LLC UAE For the following systems:

1-Panclor land based electrochlorination

plant.

2- Elchlor offshore & shipboard

electrochlorination plant

10123 Mitsubishi Heavy Industries Environmental Japan Only for Bi-Polar technique
&Chemic

10049 SESPI srl Italy None

8650 Cumberland Electrochemical Ltd United Kingdom For the following systems:1-Panclor
land based electrochlorination plant2-
Elchlor offshore & shipboard
electrochlorination plant

Wednesday, March 11, 2020 Page 292 of 304

8307 Daiki Ataka Engineering Co., Ltd Japan Model 10WL,Model 15WL,Model
35BL,Model 25BL

4962 Johnson March Systems, Inc. USA

4961 DE NORA Italy

Sub Category DEMINIRALIZATION & POTABILIZATION SYSTEM

No Contractor Name Location Limitations/Conditions

5188 ONDEO USA

11918 Metito (Overseas) Ltd United Arab

Emirates

5159 TERMOMECCANICA Italy

Wednesday, March 11, 2020 Page 293 of 304

5190 OVIVO (CHRIST) USA / United
Kingdom

5186 TERMOKIMIK Italy

5193 GE Water and Process Technologies USA

(GLEGG)

Sub Category DEMINIRALIZATION WATER TREATMENT SYSTEM & POTABILIZATION SYSTEM

No Contractor Name Location Limitations/Conditions

5158 TERMOMECCANICA Italy

9825 Hyorim Industries Inc. Korea - Demin water Plants capacity up to 205
m³/h
-Potable Water Process Capacity up to
15 m³/d
-Condensate Polishing Plants Capacity
up to 680 m³/h

9377 A.E.S ARABIA LTD. (AES) Saudi Arabia Capacity up to : 500m3/hr

Wednesday, March 11, 2020 Page 294 of 304

9262 Water & Environment Technologies Co. Saudi Arabia Up to 80 m³/Hr
Ltd (WETICO) Conditions:
The main equipment for the plant must
be supplied from one of the following
suppliers:

1-Pumps

a-KSB pumps ( Germany or France)

b-Grundfos ( Denmark )
c-Flowserve ( Holland or Finland)
d-Flygt ( Sweden )
e-Tsurumi (Japan)

2- Pressure vessels for the Reverse

osmosis membranes from:

a-Bekart ( Spain )
b-Codeline ( USA)

3- Vessels: Filter Vessels, Cation vessels,

anion vessels and mixed bid Vessels by

a-M/S. Wetico. ( KSA )

b-M/S. Ferrofab ( UAE)

4- RO membranes from:
a- Filmtec ( USA )
b-Toray (Japan )
c-Hydranautics ( USA
5- Resin for the Cation, Anion and Mixed
bed from:
a-Dow Chemicals ( USA)

5202 Veolia Saudi Arabia

5200 GE Water and Process Technologies Hungary / Canada

(ECOLOCHEM)

Wednesday, March 11, 2020 Page 295 of 304

5198 WATER AND POWER TECHNOLOGIES Salt Lake City, USA

5196 GE Water and Process Technologies Hungary / Canada

(GLEGG)

5194 US FILTER Country of origin is

subject to SEC
approval

5192 GLEGG USA

5189 OVIVO (CHRIST) USA / United

Kingdom

5187 ONDEO USA

5185 TERMOKIMIK Italy

Wednesday, March 11, 2020 Page 296 of 304

 Sub Category DESALINATION PLANT

No Contractor Name Location Limitations/Conditions

11917 Metito (Overseas) Ltd United Arab Capacity - 40,000 m3/day.
Emirates

10445 Doosan Hydro Technology USA Capacity Up to 300m3/h

10431 Veolia Saudi Arabia Reverse Osmosis system (RO)

10106 A.E.S ARABIA LTD. (AES) Saudi Arabia Capacity up to :4200 m3/hr

9726 ASTER S.p.A Italy 1: MSF Desalination Plants: Capacity up

to 5000 m3/day.
2: MED with Thermal Vapour
Compression Desalination Plants:
Capacity up to 100 m3/hr

Wednesday, March 11, 2020 Page 297 of 304

9264 Water & Environment Technologies Co. Saudi Arabia Up to 350 m³/Hr
Ltd (WETICO) Condtions:
The main equipment for the plant must
be supplied from one of the following
suppliers:

1-Pumps

a-KSB pumps ( Germany or France)

b-Grundfos ( Denmark )
c-Flowserve ( Holland or Finland)
d-Flygt ( Sweden )
e-Tsurumi (Japan)

2- Pressure vessels for the Reverse

osmosis membranes from:

a-Bekart ( Spain )
b-Codeline ( USA)

3- Vessels: Filter Vessels, Cation vessels,

anion vessels and mixed bid Vessels by

a-M/S. Wetico. ( KSA )

b-M/S. Ferrofab ( UAE)

4- RO membranes from:
a- Filmtec ( USA )
b-Toray (Japan )
c-Hydranautics ( USA
5- Resin for the Cation, Anion and Mixed
bed from:
a-Dow Chemicals ( USA)

6350 DOOSAN Korea

6349 Mitsubishi Hitachi Power Systems (MHPS) Japan

Wednesday, March 11, 2020 Page 298 of 304

 Sub Category SEWAGE TREATMENT PLANT

No Contractor Name Location Limitations/Conditions

5160 TERMOMECCANICA Italy

10107 A.E.S ARABIA LTD. (AES) Saudi Arabia Capacity up to :2500 m3/hr

9826 Hyorim Industries Inc. Korea Sewage Tratment Systems up to 4000

m³/d

5211 Techuniversal Arabia Co. LTD Saudi Arabia

11919 Metito (Overseas) Ltd United Arab

Emirates

Wednesday, March 11, 2020 Page 299 of 304

9263 Water & Environment Technologies Co. Saudi Arabia Up to 500 m³/Hr
Ltd (WETICO) Conditions:
The main equipment for the plant must
be supplied from one of the following
suppliers:

1-Pumps

a-KSB pumps ( Germany or France)

b-Grundfos ( Denmark )
c-Flowserve ( Holland or Finland)
d-Flygt ( Sweden )
e-Tsurumi (Japan)

2- Pressure vessels for the Reverse

osmosis membranes from:

a-Bekart ( Spain )
b-Codeline ( USA)

3- Vessels: Filter Vessels, Cation vessels,

anion vessels and mixed bid Vessels by

a-M/S. Wetico. ( KSA )

b-M/S. Ferrofab ( UAE)

4- RO membranes from:
a- Filmtec ( USA )
b-Toray (Japan )
c-Hydranautics ( USA
5- Resin for the Cation, Anion and Mixed
bed from:
a-Dow Chemicals ( USA)

Sub Category Waste Water System

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 300 of 304

8739 Hyorim Industries Inc. Korea - Oily waste water systems capacity up
to: 150 m³/h
- Neutralization systems up to : 150
m³/h
- Chemical waste water systems up to :
150 m³/h

11957 GE Water and Process Technologies Hungary Including MBR system.

(ECOLOCHEM)

11302 Veolia Saudi Arabia

Sub Category WATER TREATMENT SYSTEMS (DEMIN)

No Contractor Name Location Limitations/Conditions

Wednesday, March 11, 2020 Page 301 of 304

9261 Water & Environment Technologies Co. Saudi Arabia Up to 500 m³/Hr
Ltd (WETICO) Conditions:
The main equipment for the plant must
be supplied from one of the following
suppliers:

1-Pumps

a-KSB pumps ( Germany or France)

b-Grundfos ( Denmark )
c-Flowserve ( Holland or Finland)
d-Flygt ( Sweden )
e-Tsurumi (Japan)

2- Pressure vessels for the Reverse

osmosis membranes from:

a-Bekart ( Spain )
b-Codeline ( USA)

3- Vessels: Filter Vessels, Cation vessels,

anion vessels and mixed bid Vessels by

a-M/S. Wetico. ( KSA )

b-M/S. Ferrofab ( UAE)

4- RO membranes from:
a- Filmtec ( USA )
b-Toray (Japan )
c-Hydranautics ( USA
5- Resin for the Cation, Anion and Mixed
bed from:
a-Dow Chemicals ( USA)

10441 Fluytec Spain Water Treatment RO Plant

Capacity 9,600-m3/day

5209 GRAVER WATER CO. USA

Wednesday, March 11, 2020 Page 302 of 304

11641 HIDROAMBIENTE Spain

5201 GE Water & Process Technologies Hungary / Canada

(ECOLOCHEM)

10904 Aquatech Water filter system ( aquatech ) Saudi Arabia - RO Plant with Capacity up to 2400
m3/day.

5199 WATER AND POWER TECHNOLOGIES Salt Lake City, USA

5195 US FILTER USA / UAE

5203 Veolia Saudi Arabia

10855 TERMOKIMIK CORPORATION SPA Italy

Wednesday, March 11, 2020 Page 303 of 304

5210 HUNGERFORD & TERRY, INC. Country of origin is
subject to SEC
approval

10682 Metito (Overseas) Ltd United Arab Cappacity-200,000/-m3/day.

Emirates

11901 Doosan Hydro Technology USA

Wednesday, March 11, 2020 Page 304 of 304