Scribd
Upload
2K views1 page

Ear 864

The EAR 864 preamplifier from Yoshino is designed to meet the needs of audiophiles and professionals in the studio field. It is based on circuit designs from EAR's successful 834 models with additional features like balanced outputs and inputs. It has five line inputs and a tape monitoring circuit for a total of six inputs. The circuit uses five double triode valves in a minimalist design to minimize sonic degradation, and the power supply provides separate high-quality DC current for heaters and voltages. The preamplifier is robustly designed to drive power amplifiers and interconnect cables remotely for five years of continuous operation.

Uploaded by

api-3833673
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views1 page

Ear 864

The EAR 864 preamplifier from Yoshino is designed to meet the needs of audiophiles and professionals in the studio field. It is based on circuit designs from EAR's successful 834 models with additional features like balanced outputs and inputs. It has five line inputs and a tape monitoring circuit for a total of six inputs. The circuit uses five double triode valves in a minimalist design to minimize sonic degradation, and the power supply provides separate high-quality DC current for heaters and voltages. The preamplifier is robustly designed to drive power amplifiers and interconnect cables remotely for five years of continuous operation.

Uploaded by

api-3833673
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

.

One of the latest products from Yoshino, the Tim de Paravicini designed EAR 864 pre amplifier, is designed to meet a wide
variety of needs, from the most demanding of audiophiles to the professional seeking high quality monitoring equipment in the
studio field. It is based on the circuit designs used in the highly successful EAR 834P phono stage and 834L line preamp, with
a few additional refinements and features including balanced outputs and one balanced input, all coupled via high quality
transformers.
It has facilities for up to five line inputs, and offers a genuine tape monitoring circuit, making a total of six inputs. A high
quality volume control is fitted, as well as a panel mounted power switch. Input and output terminals are gold plate.
Designed by Tim de Paravicini in his usual robust style, the EAR 864 is the perfect match for any high end system, if either
biased towards analogue or digital. The electronic architecture is minimalist, so that the absolute minimum sonic degradation
takes place. There are five double triode valves, arranged in a classic ‘de Paravicini circuit. Special attention has been made to
the input circuitry. All inputs are at the rear of the chassis, on the same circuit board as the selector switches, which are
operated remotely by long control shafts.
Power supply is a unique arrangement; a high quality toridal transformer supplies a double DC power supply, that provides the
low tension (LT) heater current, and the high-tension (HT) anode voltage. It is critical in a pre amplifier that both the HT and
LT supplies are pure DC, and free from AC ripple. This is the case with all EAR products, not just this pre amplifier.
The circuit is designed in such a way to have a minimum life of five years continuous operation for the valves (barring random
valve failure). The pre amplifier has more than enough output for any power amplifier, transistor or valve, and is ideal at
driving long interconnect cables to remotely located power amplifiers.
SPECIFICATIONS
Inputs 1 x phono
5 x line level unbalanced (RCA phono connector)
1 x line level balanced (XLR connector)
Noise (unweighted) -80dB (IHF)
Input Sensitivity for 1V out Phono 2.2mV
Line 200mV
Input Impedance Phono 47k ohms
Line 47k ohms
Maximum Output 8V into 10k ohms
Power Consumption 24W max. total
Weight and Size 5kg W 15” (380mm) D 12” (305mm) H 4” (100mm)
Valves List 1 x ECC82 4 x ECC83

___________________________________________________________________________________________________
EAR/Yoshino Limited: Rectory Farm, Cambridge Road, Godmanchester, Cambs. PE18 8BP
Tel No. 01480 453791 Fax No.01480432006 Web:www.ear-yoshino.com E-mail:[email protected]

You might also like